Disturbances rejection optimization based on improved two-degree-of-freedom LADRC for permanent magnet synchronous motor systems

Permanent magnet synchronous motor(PMSM)speed control systems with conventional linear active disturbance rejection control(CLADRC)strategy encounter issues regarding the coupling between dynamic response and disturbance suppression and have poor performance in suppressing complex nonlinear disturbances.In order to address these issues,this paper proposes an improved two-degree-of-freedom LADRC(TDOF-LADRC)strategy,which can enhance the disturbance rejection performance of the system while decoupling entirely the system's dynamic and anti-disturbance performance to boost the system robustness and simplify controller parameter tuning.PMSM models that consider total disturbances are developed to design the TDOF-LADRC speed controller accurately.Moreover,to evaluate the control performance of the TDOF-LADRC strategy,its stability is proven,and the influence of each controller parameter on the system control performance is analyzed.Based on it,a comparison is made between the disturbance observation ability and anti-disturbance performance of TDOF-LADRC and CLADRC to prove the superiority of TDOF-LADRC in rejecting disturbances.Finally,experiments are performed on a 750 W PMSM experimental platform,and the results demonstrate that the proposed TDOF-LADRC exhibits the properties of two degrees of freedom and improves the disturbance rejection performance of the PMSM system.

Coupled Electromagnetic-Thermal-Fluidic Analysis of Permanent Magnet Synchronous Machines with a Modified Model

The researches on the heat generation and dissipa-tion of the permanent magnet synchronous machines(PMSMs)are integrated problems involving multidisciplinary studies of electromagnetism,thermomechanics,and computational fluid dynamics.The governing equations of the multi-physical prob-lems are coupled and hard to be solved and illustrated.The high accuracy mathematical model in the algebraically integral con-servative forms of the coupled fields is established and computed in this paper.And the equation coupling with the fluid flow and the temperature variation is modified to improve the positive definiteness and the symmetry of the global stiffness matrix.The computational burden is thus reduced by the model modification.A 20kW 4500rpm permanent magnet synchronous machine(PMSM)is taken as the prototype,and the calculation results are validated by experimental ones.

Reduction of Cogging Torque and Electromagnetic Vibration Based on Different Combination of Pole Arc Coefficient for Interior Permanent Magnet Synchronous Machine

Cogging torque and electromagnetic vibration are two important factors for evaluating permanent magnet synchronous machine(PMSM)and are key issues that must be considered and resolved in the design and manufacture of high-performance PMSM for electric vehicles.A fast and accurate magnetic field calculation model for interior permanent magnet synchronous machine(IPMSM)is proposed in this article.Based on the traditional magnetic potential permeance method,the stator cogging effect and complex boundary conditions of the IPMSM can be fully considered in this model,so as to realize the rapid calculation of equivalent magnetomotive force(MMF),air gap permeance,and other key electromagnetic properties.In this article,a 6-pole 36-slot IPMSM is taken as an example to establish its equivalent solution model,thereby the cogging torque is accurately calculated.And the validity of this model is verified by a variety of different magnetic pole structures,pole slot combinations machines,and prototype experiments.In addition,the improvement measure of the machine with different combination of pole arc coefficient is also studied based on this model.Cogging torque and electromagnetic vibration can be effectively weakened.Combined with the finite element model and multi-physics coupling model,the electromagnetic characteristics and vibration performance of this machine are comprehensively compared and analyzed.The analysis results have well verified its effectiveness.It can be extended to other structures or types of PMSM and has very important practical value and research significance.

Multi-objective Hierarchical Optimization of Interior Permanent Magnet Synchronous Machines Based on Rotor Surface Modification

To solve the problem of large torque ripple of interior permanent magnet synchronous motor(IPMSM),the rotor surface notch design method was used for V-type IPMSM.In order to accurately obtain the optimal parameter values to improve the torque performance of the motor,this paper takes the output torque capacity and torque ripple as the optimization objectives,and proposes a multi-objective layered optimization method based on the parameter hierarchical design combined with Taguchi method and response surface method(RSM).The conclusion can be drawn by comparing the electromagnetic performance of the motor before and after optimization,the proposed IPMSM based on the rotor surface notch design can not only improve the output torque,but also play an obvious inhibition effect on the torque ripple.

State-Model Based Time-Domain Diagnosis of Internal Faults for Permanent Magnet Synchronous Machine Wind Application

Upon occurrence of an internal fault on the PMSM （permanent magnet synchronous machine）, the topology of the stator is amended causing structural imbalances due to the change of the connection within the windings. In this work, a state model of internal faults of the PMSM is developed. This model is in the （abc） reference frame. The modeling approach is based on the assumption that each stator phase is replaced by two major and minor sub-windings. This model is used subsequently in the residual generation for diagnosis. The fault indicators are obtained by the projection in parity space and estimated using the Luenberger observer. A scenario of fault inter-turn by the short-circuit occurring between phase （a and b） is validated by simulation.

A New Scheme to Direct Torque Control of Interior Permanent Magnet Synchronous Machine Drives for Constant Inverter Switching Frequency and Low Torque Ripple

DTC （direct torque control） can produce quick and robust response, but it has the problems of large torque ripples and inconstant inverter switching frequency. This paper introduces a modified direct torque control based on the SVM （space vector modulation） for IPMSM （interior permanent magnet synchronous motor） drive. Two PI （proportional-integral） controllers regulate the flux and torque, respectively, and the inverter is controlled by the SVM technique in the proposed DTC system. Simulation results show that the performance of the proposed DTC system has been improved with respect to the conventional DTC. The DTC system can effectively reduce the flux and torque ripples.

基于简化有限集模型预测电流控制的五相PMSM统一容错控制

在五相永磁同步电机(permanent-magnet synchronous motor,PMSM)中,有限集模型预测容错控制(finite control set model predictive fault tolerant control,FCS-MPFTC)存在计算量大、电流谐波含量高等问题。因此,该文提出一种简化FCS-MPFTC来实现相开路和短路故障情况下的统一容错控制。首先,将模型预测电流控制的电流代价函数等效转化为电压代价函数,并采用无差拍方法通过电流模型计算出参考电压。然后,基于抑制三次谐波电流为0的原则合成虚拟电压矢量(virtual voltage vector,V^(3));通过重构V^(3)和扇区,以直接获得参考电压矢量对应的最优电压矢量。最后,对传统和简化FCS-MPFTC在开路和短路故障下进行对比实验。结果表明,所提策略能够有效减小故障后计算量、转矩脉动以及电流谐波含量。

改进滑模观测器的电流源逆变器驱动PMSM无位置传感器控制

由于电流源逆变器(CSI)的叠流效应以及前级DC-DC控制的母线电流脉动较大,使得扩展反电动势中含有大量谐波,造成较大的位置误差。针对此问题,该文提出一种改进滑模观测器的电流源逆变器驱动永磁同步电机无传感器控制方法。首先,基于传统滑模观测器,设计复系数滤波器代替传统低通滤波器,实现了对估计反电动势的准确提取,同时也抑制了估计反电动势中的高频抖动和高次谐波。其次,将二阶广义积分器内嵌于锁相环中,用于消除位置误差信号中的低次谐波,提高位置观测准确度。最后,将估算的速度信息反馈回复系数滤波器,实现复系数滤波器的自适应性。实验结果表明,所提方法在不同工况下,能够有效提高估算的转子位置精度,验证了方法的可行性与有效性。

基于几何约束优化的重复控制器及PMSM电流谐波抑制应用

重复控制器凭借其具有多个谐振峰而广泛应用于电流谐波抑制领域,然而在实际电机控制系统中,由于系统采样频率固定而电流谐波频率随电机转速而变化,会导致重复控制器中出现分数阶延时环节,而该环节在实际控制器中无法实现。对此,该文针对现有分数阶处理方法进行讨论,分析了插值逼近方法中插值系数对重复控制器整体频率特性的作用,据此提出基于几何约束优化的分数阶重复控制器,通过优化各插值系数,电机在全转速范围内都可以保证谐振频率和电流谐波频率相吻合,并且谐振峰值更符合电机谐波组成规律;还分析了滤波器所处反馈回路位置对频率特性的影响,作为组合滤波器设计依据;为保证系统稳定,对包含PI、重复控制器以及离散电机模型的电流控制系统进行稳定性分析,并作为控制参数选取依据。最后,通过台架实验验证了该文所提出的方法的谐波抑制性能是更优的。

PMSM正切趋近律无位置传感器角度补偿方法研究

在负载转矩突变的动态过程中,基于PI调节器的角度补偿方法作用时PMSM超螺旋滑模观测器(STSMO)转子电角度估算误差波动剧烈,因此依据角度估算误差的定义,建立了转子电角度补偿算法的数学模型。根据滑模控制和趋近律理论,提出了基于正切趋近律的变步长闭环角度补偿方法,选择角度估算误差的半角正切值作为角度调节步长,并通过前馈解耦得到的角度估算误差正余弦信号计算该步长,实现了对无位置传感器控制系统动态性能和抗扰动能力的改善。根据归一化灵敏度的定义,分析调节步长随角度估算误差变化的灵敏度,提出了基于归一化补偿灵敏度的系统动态性能分析方法,衡量两种补偿算法作用下系统的动态性能。计算和仿真结果表明,正切趋近律补偿方法具有更高的归一化补偿灵敏度,在负载转矩突变等角度估算误差变化剧烈的工况下能够实现更好的补偿效果,抑制估算角度误差的波动。实验结果表明,相比传统的PI补偿方法,正切趋近律补偿方法能够将突加额定转矩动态过程中角度估算误差的波动幅度降低61.9%,动态过程持续时间缩短23%,有效提升了系统的动态性能和抗扰动能力。

基于模糊滑模控制的PMSM矢量控制系统

永磁同步电机(PMSM)双闭环矢量控制系统中,传统PI控制器转速环无法满足PMSM的更高控制要求。该文设计一种积分滑模控制器,并引入光滑、连续的新式饱和函数替代滑模控制器中的符号函数,以提高系统的抗扰动性能和鲁棒性;为提高系统在电机运行状态发生变化时的自适应调节能力,使用模糊控制对滑模趋近律中的参数进行自适应调节,以提高趋近速度,降低滑模抖振。建立基于模糊控制的PMSM滑模控制系统仿真模型,并与使用传统滑模控制器的PMSM控制模型进行对比分析,结果验证了模糊滑模速度控制器具有更好的抗扰动能力和鲁棒性。

基于二阶滑模扰动观测的PMSM电流预测控制研究

针对无差拍电流预测控制(DPCC)对电机参数的依赖性,系统性能尤其易受电感参数影响的问题,研究基于二阶滑模扰动观测的永磁同步电机(PMSM)电流预测控制方法。首先,根据滑模控制原理分析电感参数失配对系统参数鲁棒性的影响,及传统滑模控制的不连续函数导致的系统“抖振”;然后,在DPCC中引入一种基于二阶趋近律的滑模扰动观测器(SMDO),实时补偿电感参数失配造成的扰动,同时通过二阶趋近律加速扰动误差的收敛;最后,将该方法与DPCC、SMDO+DPCC进行对比仿真实验。实验结果表明,在电感参数失配的情况下,该方法降低了电流稳态误差,提高了系统参数的鲁棒性,减少了传统滑模控制带来的系统“抖振”现象。

Comparison of Two Novel MRAS Based Strategies for Identifying Parameters in Permanent Magnet Synchronous Motors

Two model reference adaptive system （MRAS） estimators are developed for identifying the parameters of permanent magnet synchronous motors （PMSM） based on the Lyapunov stability theorem and the Popov stability criterion, respectively. The proposed estimators only need online measurement of currents, voltages, and rotor speed to effectively estimate stator resistance, inductance, and rotor flux-linkage simultaneously. The performance of the estimators is compared and verified through simulations and experiments, which show that the two estimators are simple, have good robustness against parameter variation, and are accurate in parameter tracking. However, the estimator based on the Popov stability criterion, which can overcome parameter variation in a practical system, is superior in terms of response speed and convergence speed since there are both proportional and integral units in the estimator, in contrast to only one integral unit in the estimator based on the Lyapunov stability theorem. In addition, the estimator based on the Popov stability criterion does not need the expertise that is required in designing a Lyapunov function.

基于谐振改进型单自由度自抗扰控制器的PMSM转速波动抑制策略

高性能系统期望电机输出平滑且稳定的转速。然而,永磁同步电机驱动系统的转速环遭受多源扰动影响,导致电机输出转速呈现非周期和周期波动。为了抑制转速环中多源扰动,该文提出一种谐振改进型单自由度自抗扰控制器(active disturbance rejection controller,ADRC)。单自由度ADRC保留了传统ADRC对非周期扰动的抑制能力。在此基础上,该文采用准谐振控制器拓展单自由度ADRC观测器在特定频率处的带宽,以进一步提高单自由度ADRC对周期扰动的抑制能力。因此,所提方法可以同时抑制转速的非周期和周期波动进而提高转速的控制性能。此外,该文利用Nyquist稳定判据分析所提方法的稳定性。最后,通过实验验证所提方法的有效性。

Finite-Control-Set Model Predictive Control of Permanent Magnet Synchronous Motor Drive Systems——An Overview

Permanent magnet synchronous motors(PMSMs)have been widely employed in the industry. Finite-control-set model predictive control(FCS-MPC), as an advanced control scheme, has been developed and applied to improve the performance and efficiency of the holistic PMSM drive systems. Based on the three elements of model predictive control, this paper provides an overview of the superiority of the FCS-MPC control scheme and its shortcomings in current applications. The problems of parameter mismatch, computational burden, and unfixed switching frequency are summarized. Moreover, other performance improvement schemes, such as the multi-vector application strategy, delay compensation scheme, and weight factor adjustment, are reviewed. Finally, future trends in this field is discussed, and several promising research topics are highlighted.

计及磁链和电流的PMSM DTC系统中功率器件键合线老化监测方法

在闭环控制系统中,基于电参数的功率器件老化监测方法是电力电子可靠性领域的难点之一。以永磁同步电机直接转矩控制系统为例,研究基于磁链相图和电流的功率逆变器中功率器件老化状态的在线监测方法。首先,分析功率器件老化的特征,得到键合线老化引起通态电阻增加的结论;其次,研究得到功率器件键合线老化与磁链相图、直轴电流和三相电流峰值变化的关系,进而提出功率器件键合线老化的监测方法;最后,通过多组仿真实验验证了基于磁链相图和电流的在线监测方法均可实现功率逆变器中功率器件键合线老化状态的在线监测。其中,基于磁链相图的在线监测方法需要系统磁链出现一些波动时才易观测,此时功率器件处于失效状态,该方法并不可取;而基于三相电流的监测方法能够更为精确地监测功率器件老化状况,效果更为优越。

基于复合非奇异快速终端滑模算法的PMSM位置控制

针对永磁同步电机(PMSM)位置控制系统在参数摄动和负载扰动等各种不确定性下的位置跟踪精度低和鲁棒性差的问题,提出了一种结合非奇异快速终端滑模控制(NFTSMC)和扰动观测器的复合控制策略。首先,NFTSMC采用了具有全局快速收敛特性的非线性滑模面,结合连续的滑模控制率设计了位置控制器,通过Lyapunov定理证明了其稳定性。然后,为了进一步提高永磁同步电机位置控制系统的鲁棒性,引入扩张状态观测器来精确估计系统的集总扰动并对位置控制器进行前馈补偿。最后,仿真与实验结果表明,与传统的滑模相比,所提出的复合滑模控制策略具有更快的动态响应、更高的跟踪精度和更强的鲁棒性。

Permanent Magnet Shape Optimization Method for PMSM Air Gap Flux Density Harmonics Reduction

This paper proposed a permanent magnet optimization method to suppress the air gap flux density harmonic of permanent magnet synchronous motor(PMSM).The method corrected the effective air gap length of the motor,calculated the magnetization length of the permanent in the case of parallel magnetization,and took the influence of the permanent magnet relative permeability into consideration.Based on these works,for a given sinusoidal air gap flux density waveform,the corresponding structural parameters can be calculated,so as to achieve the optimization of the permanent magnet.By using this method to optimize the shape of the magnet,the fundamental wave of the air gap flux density can be retained to the greatest extent,so as to eliminate harmonics and maintain the output capacity at the same time.The feasibility and accuracy of the method have been verified by finite element analysis(FEA)and prototype machine experiment.This method is simple and time-saving,and has a satisfactory accuracy,which provides a reference method for permanent magnet optimization of PMSM.

Analysis for Rotor Losses of High Speed Permanent Magnet Synchronous Motor

This paper presents an analysis based on analytical method for solid rotor motors for determining the rotor eddy current losses due to the current harmonics of the stator winding. The accuracy of the analytical results is verified by experiments.

Vector control of permanent magnet synchronous motor based on dynamic matrix control

Aiming at the control problem of strongly nonlinear and coupled permanent magnet synchronous motor(PMSM)oil rig,this paper presents a predictive control method based on dynamic matrix model.In this method,the dynamic matrix algorithm using multistep prediction technique is applied to the speed loop control of the motor vector control.And its control effect is compared with the traditional proportional integral(PI)control of the motor.By comparing the initial dynamic response and the steady-state recovery under load interference of the two methods,it is shown that the dynamic response and the robustness of the motor controlled by the new method is better than that controlled by conventional PI method.And the feasibility of new control in the application of PMSM oil rig is verified.