Achieving a superior Na storage performance of Fe-based Prussian blue cathode by coating perylene tetracarboxylic dianhydride amine

Fe-based Prussian blue(Fe-PB)cathode material shows great application potential in sodium(Na)-ion batteries due to its high theoretical capacity,long cycle life,low cost,and simple preparation process.However,the crystalline water and vacancies of Fe-PB lattice,the low electrical conductivity,and the dissolution of metal ions lead to limited capacity and poor cycling stability.In this work,a perylene tetracarboxylic dianhydride amine(PTCDA)coating layer is successfully fabricated on the surface of Fe-PB by a liquid-phase method.The aminated PTCDA(PTCA)coating not only increases the specific surface area and electronic conductivity but also effectively reduces the crystalline water and vacancies,which avoids the erosion of Fe-PB by electrolyte.Consequently,the PTCA layer reduces the charge transfer resistance,enhances the Na-ion diffusion coefficient,and improves the structure stability.The PTCA-coated Fe-PB exhibits superior Na storage performance with a first discharge capacity of 145.2 mAh g^(−1) at 100 mA g^(−1).Long cycling tests exhibit minimal capacity decay of 0.027%per cycle over 1000 cycles at 1 A g^(−1).Therefore,this PTCA coating strategy has shown promising competence in enhancing the electrochemical performance of Fe-PB,which can potentially serve as a universal electrode coating strategy for Na-ion batteries.

SYNTHESIS AND PHOTOELECTRIC PROPERTIES OF PERYLENE RED PIGMENTS

A series of N, N′ dialkyl (and aryl) perylene 3,4:9, 10 bis (dicarboximide) compounds were prepared and purified, and their photoelectric properties as organic photoconductors were explored. It is found that N, N′ dimethyl perylene 3,4:9, 10 bis (dicarboximide) and perylene 3,4:9,10 tetracarboxylic acid bisbenzimidazole show excellent photoconductivities, their charge acceptance reaches 700 V and 485 V, and the photosensitivity is 45 lx·s and 10 lx·s with dark decays 70 and 60 V/s respectively. The introduction of chlorine atoms can improve their photoelectric properties. SEM analyses also show that the dispersion of pigment in OPC could affect its photosensitivity.

Perylene diimide self-assembly: From electronic structural modulation to photocatalytic applications

As an emerging organic semiconductor,perylene diimide(PDI)self-assembly has attracted tremendous attention in the aspects of solar cells,sensors,fluorescence probes and n-transistors,etc.In term of photocatalysis,various photocatalysts based on PDI self-assembly exhibit some unique properties,such as intrinsicΠ-Πstacking structure,fast internal charge transfer,band-like electronic structure,flexible structural modifiability,well-defined morphological adjustability and excellent light absorption.This paper mainly presents recent progress on PDI self-assembly regarding how to regulate the electronic structure of PDI self-assembly.In addition,the photocatalytic applications of PDI self-assembly and its complexes were reviewed,such as environmental remedy,energy productions,organic synthesis and photodynamic/photothermal therapy,further highlighting related photocatalytic mechanisms.Finally,the review contents and some perspectives on photocatalytic research of PDI selfassembly were summarized,and some key scientific problems were put forward to direct related photocatalytic research in future.

Self-assembly constructed by perylene bisimide derivatives bearing complementary hydrogen-bonding moieties

An intermediate compound 2, 4-bis（laurylamino）-6-（1-（2-aminoethyl）-piperazine）-1, 3, 5-triazine was prepared by stepwise nucleophilic substitution on triazine ring by lauryl amine and subsequently 1-（2-aminoethyl）-piperazine. Then imidization of perylene-3, 4, 9, 10-tetracarboxylic acid dianhydride with 2,4-bis（laurylamino）-6-（1-（2-aminoethyl）-piperazine）-1, 3, 5-triazine was carried out to afford a novel perylene derivative bearing two melamine blocks （S2） and 1, 6, 7, 12-tetra（4-tert-butyl phenoxy）-perylene-3, 4, 9, 10-tetracarboxylic acid bisimide （S1. The hydrogen-bonding interactions between S1 and S2 were investigated by IH NMR spectrum, UV/Vis spectrum and fluorescence spectrum. The influences on the morphologies of S1·S2 aggregates were investigated. The results show that well-defined nanofibers with a diameter of about 100 nm can be obtained by self-assembly between S1 and S2 only in CH2Cl2 solution. Based on these results, guidelines for the molecular design and self-assembly of supramolecular polymer materials are presented.

Synthesis and near-infrared characteristics of novel perylene bisimide dyes bay-functionalized with naphthalimide chromophores

Novel perylene bisimide dyes bay-functionalized with naphthalimide chromophores have been prepared conveniently by coupling of 1,8-naphthalimide and dibromoperylene bisimides. Their optical properties were investigated by UV-vis and fluorescence spectroscopy. The absorption spectra of these compounds showed wide spectral responses from 300 to 700 nm, which would be potentials for application as organic solar cells.

Charge Transfer Properties of Organic Semiconductor Molecules of Perylene Derivatives

The charge transfer rates of perylene and its four derivatives were studied at the level of B3LYP/6-31G＊＊ by density functional theory. The results showed that the perylene and its four derivatives belonged to the semiconductor molecules, which released energy when electron was injected. Therefore, they were suitable to be used as the electron injection material. The introduction of OH group can improve the electron transfer rate significantly. The formations of intramolecular hydrogen bonds were unfavorable to the hole transfer, but conducive to the electron transfer. The perylene derivatives, 2,5-3,4,5-（trifluorophenyl）ethynyl-8,11-3,4,5-trihydroxyphenyl ethynyl, designed in this article had the hole transfer rate of 1.57 cm2/V·s·1. Therefore, this kind of material will be potential hole transfer material with high transfer efficiency.

All-organic covalent organic frameworks/perylene diimide urea polymer S-scheme photocatalyst for boosted H_(2) generation

Conjugated covalent organic frameworks(COFs)hold great promise in photocatalytic hydrogen evolution owing to their high crystallinity,large surface area,and distinct structure.However,COFs exhibit poor charge separation.Therefore,investigating highly effective COF-based photocatalysts is crucial.For the first time,conjugated COF/perylene diimide urea polymer(PUP)all-organic heterostructure with S-scheme interfacial charge-transfer channels was successfully developed and manufactured via in situ coupling of the two-dimensional triazine-based imine-linked COF(denoted as TATF-COF)with PUP.The optimal photocatalytic hydrogen-evolution rate of 94.5 mmol h^(-1) g^(-1) for TATF-COF/PUP is 3.5 times that of pure TATF-COF and is comparable to or even higher than that of the previously reported COF-based photocatalysts,resulting in an apparent quantum efficiency of up to 19.7%at 420 nm.The improved directional S-scheme charge transfer driven by the tuned built-in electric field and enhanced oxidation and reduction reaction rates of the photogenerated carriers contribute synergistically to the boosted photocatalytic H_(2) evolution.Experiments and theoretical studies reveal plausible H_(2) evolution and spatial S-scheme charge-separation mechanisms under visible-light irradiation.This study provides advanced methods for constructing all-organic S-scheme high-efficiency photocatalysts by the modulation of band structures.

A novel perylene diimide-based ionene polymer and its mixed cathode interlayer strategy for efficient and stable inverted perovskite solar cells

Inverted(p-i-n)perovskite solar cells(PerSCs)have attracted much attention owing to their low temperature processability,less hysteresis effect and easy integration as a subunit for the tandem device.The unsatisfactory interface contacts and energy level barrier between adjacent interlayers on the cathode side are one of the key challenges for the development of p-i-n PerSCs.Herein,perylene diimidebased(PDI)ionene polymer was synthesized and developed as a cathode interlayer(CIL)to enhance interface contact,reduce the energy level barrier and prevent the migration of I-ions.The compact PNPDI CIL with high conductivity and appropriate lowest unoccupied molecular orbital(LUMO)level,resulted in a high efficiency device(20.03%),which is higher than the control device with bathophenanthroline(Bphen)(19.48%).Bphen-based CIL shows better adjusting ability of the work function of cathode metal but exhibits poor film-forming property.So,the synergistic effect of 1+1>2 can be obtained by combining Bphen and PNPDI into one CIL.As expected,the device performance was further improved by using the mixed CIL of Bphen and PNPDI,and 21.46%power conversion efficiency(PCE)was achieved.What’s more,the compact and hydrophobic mixed CIL dramatically enhanced the resistance to I-ions and moisture,which led to much enhanced device stability.

Steady and transient behavior of perylene under high pressure

Pressure can reduce the distances among atoms, thereby modifying the overall optical characteristics of molecules.In this article, the excited state behavior of perylene is carefully observed under isotropic pressure and non-complexing condition. In a steady state, absorption peak shows red shift and spectral width are broadened with pressure increasing,which is ascribed to the π-electron delocalization between molecules. In a transient state, the transition dynamics presents a wavelike tendency with pressure increasing because the shift of self-tapping exciton state is contrary to that of Y-state with pressure increasing. The results conduce to understanding the influence of inter-molecule interaction on excited state behavior with inter-molecule distance decreasing, which contributes to studying the materials under extreme condition.

Hydrochloric acid‐mediated synthesis of ZnFe_(2)O_(4) small particle decorated one‐dimensional Perylene Diimide S‐scheme heterojunction with excellent photocatalytic ability

The recyclable and stable ZnFe_(2)O_(4) small particle decorated one‐dimensional perylene diimide(PDI)S‐scheme heterojunction(1D PDI/ZnFe_(2)O_(4))is prepared by the hydrochloric acid‐mediated(HCl‐mediated)strategy,interestingly,the morphology of the 1D PDI/ZnFe_(2)O_(4) can also be effectively regulated by HCl‐mediated process,the existence of HCl can regulate PDI into a uniform rod structure,while the co‐existence of HCl and PDI can limit ZnFe_(2)O_(4) to become the uniform small particles.More importantly,based on the 1D rod structure of PDI and the small size effect of ZnFe_(2)O_(4),carriers can migrate to the surface more easily,which can improve the photocatalytic activity.Meanwhile,due to the appropriate energy level structure,the S‐scheme heterojunction structure is formed between PDI and ZnFe_(2)O_(4),which eliminates meaningless photo‐generated charge carriers through recombination and introduces strong redox to further enhance the photodegradation effect,thereby,1D PDI/ZnFe_(2)O_(4) exhibits excellent photocatalytic ability,under the visible light irradiation,the degradation rate of tetracycline(TC)with 1D PDI/ZnFe_(2)O_(4)(66.67%)is 9.18 times that with PDI(7.26%)and 9.73 times that with ZnFe_(2)O_(4)(6.85%).This work proposes new ideas for the assembly of magnetic organic‐inorganic S‐scheme heterojunction photocatalysts.

Synthesis,characterization,and activity of a covalently anchored heterogeneous perylene diimide photocatalyst

The consecutive two‐photon photocatalytic behavior of perylene diimide(PDI)enables it to catalyze photoreduction reactions that are thermodynamically unfavorable via single‐photon processes.In this work,we developed a heterogeneous PDI photocatalyst by covalently binding PDI molecules on the surface of nanosilica.This photocatalyst structure overcomes the intrinsic limitation of the low solubility of PDI,but retains its consecutive two‐photon photocatalytic property.Detailed characterization of the photocatalyst by techniques such as thermogravimetric analysis,solid‐state nuclear magnetic resonance spectroscopy,and Fourier transform infrared spectroscopy indicated that the PDI molecules were anchored covalently on the surface of nanosilica.The obtained photocatalyst reduced aryl halides under visible‐light irradiation in polar organic solvent and in water.The present study provides a promising strategy to realize two‐photon activity of PDI in common solvents for photocatalytic applications.

Effects of 1,7-Bromine Substitution at Bay Area on Self-assembly Behavior and Photo Physical Properties of Perylene Diimide

N,N'-bis( n-dodecyl)-3,4: 9,10-tetracarboxyl-diimide( 1,7-H-PDI-C12) and its bay position 1,7-Br substituted derivative have been synthesized and characterized by1H-NMR,13C-NMR,FT-IR,and X-ray diffraction( XRD). A comparison of the two samples by measuring their photo physical properties using UV visible absorption and fluorescence emission spectra revealed that bay substitutions of bromine do not have significant effect on the perylene diimide( PDI) photo physical properties in solution. However,the solid state fluorescence properties were enhanced by brominating at bay areas. The solid fluorescence quantum yield of 1,7-Br-PDI-C12 was 2. 83%( Фf= 2. 83%) and 1,7-H-PDI-C12 was only 0. 02%( Фf= 0. 02%). This behavior was also reflected in the steady-state fluorescence spectra. This work shows that solid state photo physical properties of PDI could be improved without changing the other properties by simply using bromine substitution at bay areas. These types of materials are useful intermediate for further synthesis of PDI with tunnable optoelectronic properties.

Synthesis of a Novel Organic Soluble and Thermal-stable Fullerene-perylene Dyad

A novel organic soluble and thermal-stable fullerene-perylene dyad, in which a perylene moietyis attached to C60, has been prepared by 1, 3-dipolar cycloaddition of the azomethine ylides generated in situ from the aldehyde and N-methylglycine and characterized by NMR, FT-IR, TGA, absorption and fluorescent spectra etc.

Effect of Fluorination on Aggregate Structure of Perylene Diimide

The effect of fluorination on the aggregate structure of a novel fluorinated perylene diimide, N, N'-diperfluorophenyl-3, 4, 9, 10-perylenetetracarboxylic diimide 1, was investigated by UV-Vis absorptions and the conformation simulations from AM1 semi-empirical quantum mechanics modeling. The results showed that in the solid film 1 molecules stacked with the perfluorinated phenyl groups straightly over or below the perylene cores of the adjacent 1 molecules.

Extraordinary Ultrahigh-Capacity and Long Cycle Life Lithium-Ion Batteries Enabled by Graphitic Carbon Nitride-Perylene Polyimide Composites

Graphitic carbon nitride(g-C_(3)N_(4))is widely used in organic metal-ion batteries owing to its high porosity,facile synthesis,stability,and high-rate performance.However,pristine g-C_(3)N_(4)nanosheets exhibit poor electrical conductivity,irreversible metal-ion storage capacity,and short-term cycling owing to their high concentration of graphitic-N species.Herein,a series of 3,4:9,10-perylenetetracarboxylic diimide-coupled g-C_(3)N_(4)composite anode materials,CN-PI_(x)(x=0.2,0.5,0.75,and 1),was investigated,which exhibited an unusually high surface nitrogen content(23.19-39.92 at.%)and the highest pyridinic-N,pyrrolic-N,and graphitic-N contents reported to date.The CN-PI_(1)anode delivers an unprecedented and continuously increasing ultrahigh discharging capacity of exceeding 8400 mAh g^(-1)(1.96 mWh cm^(-2))at 100 mA g^(-1)with high specific energy density(E_(sp))of~7700 Wh kg^(-1)and the volumetric energy density(E_(v))of~14956 Wh L-1 and an excellent long-term stability(414 mAh g^(-1)or 0.579 mWh cm^(-2)at 1 A g^(-1)).Furthermore,the activation of the CN-PI_(x)electrodes contributes to their superior electrochemical performance,resulting from the fact that the Li+is not only stored in the CN-PI_(x)composites but also CN-PI_(x)activated the Li^(0)adlayer on the CN-PI_(1)-Cu heterojunction as an SEI layer to avoid the direct contact of Li^(0)phase and the electrolyte.The CN-PI_(1)full cell with LiCoO_(2)as the cathode delivers a discharge capacity of~587 mAh g^(-1)at a 1 A g^(-1)after 250 cycles with a Coulombic efficiency nearly 99%.This study provides a strategy to develop N-doped g-C_(3)N_(4)-based anode materials for realizing long-lasting energy storage devices.

Self-assembled helical nanostructures from an asymmetrical perylene diimide

An asymmetrical perylene diimide 3, N-（4-methoxyphenyl）-N＇-（4-nitrophenyl）-perylene-3,4,9,10-tetracarboxylic diimide, was synthesized, and its self-assembly and dissociation behaviors in chloroform was studied in detail by UV-vis and fluorescence spectroscopies. The resulting unique helical nanostructures from 3 were proposed to be self-assembled via the cooperative actions of π-π stacking, steric hindrance and electrophile-nucleophile type pairing.

High Charge Mobility of a Perylene Bisimide Dye with Hydrogen-bond Formation Group

A perylene bisimide dye covalently bonded with a hydrogen-bond formation group of 1, 3, 5-triazine-2, 4-diamine has been synthesized. Its casting films show a charge carrier mobility over 10^-3 cm^2/Vs, which is in the range of the highest values found for other promising charge transport materials suitable for solution processable technique.

Electrical and dielectric properties of Al/p-Si and Al/perylene/p-Si type diodes in a wide frequency range

The perylene （C20H12） layer effect on the electrical and dielectric properties of Al/p-Si （MS） and Al/perylene/p-Si （MPS） diodes have been investigated and compared in the frequency range of 0.7 kHz-2 MHz. Experimental results show that C-V characteristics give an anomalous peak for two structures at low frequencies due to interface states （Nss） and series resistance （Rs）. The increases in C and G/o3 at low frequencies confirm that the charges at interface can easily follow an ac signal and yield excess capacitance and conductance. The frequency-dependent dielectric constant （er） and dielectric loss （e＇） are subtracted using C and G/co data at 1.5 V. The eI and e＂ values are found to be strongly dependent on frequency and voltage, and their large values at low frequencies can be attributed to the excess polarization coming from charges at traps. Plots of ln（o＇ac）-ln（w） for two structures have two linear regions, with slopes of 0.369 and 1.166 for MS, and of 0.077 and 1.061 for MPS, respectively. From the C 2-V characteristics, the doping acceptor atom concentration （NA） and barrier height （,~） for Schottky barrier diodes （SBDs） 1.303 ~ 1015 cm-3, and 1.10 and I. 13 eV, respectively. of MS and MPS types are also obtained to be 1.484 ~ 1015

Broadband Visible Light Harvesting BODIPY-Perylene Dyad and Triad:Synthesis,Photophysical Properties,and Photooxidation Applications

In this study,diodo boron dipyrromethene(BODIPY)is employed a8 the energy donor and 3,4,9,10-perylene tetracarboxylic dianhydride(PDA)as the energy acceptor,enabling the synthesis of two new compounds:a BODIPY-perylene dyad named P1,and a triad named P2.To investigate the impact of the energy donor on the photophysical processes of the system,P1 comprises one diodo-BODIPY unit and one PDA unit,whereas P2 contains two diodo-BODIPY moieties and one PDA unit.Due to the good spectral complementarity between diiodo-BODIPY and PDA,these two compounds exhibit excellent light-harvesting capabilities in the 400-620 nm range.Steady-state fluorescence spectra demonstrate that when preferentially exciting the diodo-BODIPY moiety,it can effectively transfer energy to PDA;when selectively exciting the PDA moiety,quenching of PDA fluorescence is observed in both P1 and P2.Nanosecond transient absorption results show that both compounds can efficiently generate triplet excited states,which are located on the PDA part.The lifetimes of the triplet states for these two compounds are 103 and 89μs,respectively,significantly longer than that of diiodo-BODIPY.The results from the photooxidation experiments reveal that both P1 and P2 demonstrate good photostability and photooxidation capabilities,with P2 showing superior photooxidative efficiency.The photooxidation rate constant for P2 is 1.3 times that of P1,and its singlet oxygen quantum yield is 1.6 times that of P1.The results obtained here offer valuable insights for designing new photosensitizers.

Surface doping effect on the optoelectronic performance of 2D organic crystals based on cyano-substituted perylene diimides

Compared to organic thin films,organic single crystals offer significant potential in organic phototransistors(OPTs)due to their enhanced charge transport,large surface area,and defect-free nature.However,the development of n-type semiconductors has lagged behind p-type semiconductors.To enhance semiconductor device performance,a doping process can be employed,which typically involves the introduction of charged impurities into the crystalline semiconducting material.Its aim is to reduce the Ohmic losses,increase carrier density,improve transport capabilities,and facilitate effective carrier injection,ultimately enhancing the electrical properties of the material.Traditional doping processes,however,often pose a risk of damaging the structure of single crystals.In this study,we have synthesized novel cyanosubstituted chiral perylene diimides,which self-assemble into two-dimensional single crystals that can be used for n-type semiconductor devices.We have employed a surface doping strategy using diethylamine vapor without disrupting the crystal structure.The fabricated devices exhibit significantly higher charge transport properties after doping,achieving a maximum electron mobility of 0.14 cm^(2)V^(-1)s^(-1),representing an improvement of over threefold.Furthermore,the optoelectronic performance of the doped devices has significantly improved,with the external quantum efficiency increased by over 9 times and the significantly improved response time.These results suggest that our surface doping technology is a promising way for enhancing the performance of 2D organic single-crystal OPTs.