To date,there is no research that deals with biological waste as fillers in polyphenylene sulfide(PPS).In this study,oyster shells were recycled and treated to prepare thermally-treated oyster shells(TOS),which were u...To date,there is no research that deals with biological waste as fillers in polyphenylene sulfide(PPS).In this study,oyster shells were recycled and treated to prepare thermally-treated oyster shells(TOS),which were used as PPS fillers to make new bio-based antibacterial composite materials.The effect of varying the content of TOS was studied by means of structure and performance characterization.PPS/TOS composites were demonstrated to have an antibacterial effect on the growth of E coli and S.aureus.Qualitative analysis showed that when the TOS content was≥30%and 40%,the composite materials had an apparent inhibition zone.Quantitative analysis showed that the antibacterial activity increased with the TOS content.Fourier transform infrared spectroscopy indicated the formation of hydrogen bonds between the molecular chains of TOS and PPS and the occurrence of a coordination reaction.At 10%TOS,the composite tensile strength reached a maximum value of 72.5 MPa,which is 9.65%higher than that of pure PPS.The trend of bending properties is the same as that of tensile properties,showing that the maximum property was reached for the composite with 10%TOS.At the same time,the crystallinity and contact angle were the highest,and the permeability coefficient was the lowest.The fatigue test results indicated that for the composite with 10%TOS,the tensile strength was 23%lower than static tensile strength,and the yield strength was 10%lower than the static yield strength.The results of the study showed that TOS not only could reduce the cost of PPS,but also could impart antibacterial properties and enhance the mechanical and,barrier properties,the thermostability,as well as the crystallinity.展开更多
The effect of pressure-induced flow（PIF） processing on the mechanical properties of noncontinuous carbon fiber（CF） reinforced polyphenylene sulfide（PPS） composites was investigated. A series of CF/PPS composites...The effect of pressure-induced flow（PIF） processing on the mechanical properties of noncontinuous carbon fiber（CF） reinforced polyphenylene sulfide（PPS） composites was investigated. A series of CF/PPS composites under different processing conditions were prepared through PIF-processing. SEM observations showed that the interfaces adhesion between CFs and PPS became stronger and ductile fracture mainly occurred in PPS matrix. This brought to a great increase of both strength and toughness by about 2 folds, when the composites were processed at 240 ℃ and under 263 MPa. The results in differential scanning calorimetry（DSC） and X-ray diffraction（XRD） measurements indicated more regular crystalline structures and orientation of lamellae formed during PIF-processing.展开更多
Fluororesin-based anti-corrosive coatings including graded FEP/PPS were prepared on carbon steel by melt powder coating, the bonding strength of all coating systems was determined by the pull-off test. It is found tha...Fluororesin-based anti-corrosive coatings including graded FEP/PPS were prepared on carbon steel by melt powder coating, the bonding strength of all coating systems was determined by the pull-off test. It is found that the poor adhesion of fluororesin coatings to metallic substrates is improved obviously by the graded coating structure of FEP/PPS, and the bonding strength reaches up to 11.8 MPa for the five-layer system. Examination by electron probe microanalysis （EPMA） verifies that the distribution of main components is graded in the five-layer system, which is responsible for the enhancement of the interfacial bonding.展开更多
Blends of polyphenylene sulfide (PPS) containing trace amounts of branching and/or cross-linking in chain and Polyamide-66 (PA-66) have been prepared by melt blending. The rheological behavior of PPS/PA-66 blends has ...Blends of polyphenylene sulfide (PPS) containing trace amounts of branching and/or cross-linking in chain and Polyamide-66 (PA-66) have been prepared by melt blending. The rheological behavior of PPS/PA-66 blends has been studied by means of capillary rheometer, and compared with PPS. The effects of shear rate, shear stress and temperature on the how of PPS/PA-66 blends and PPS are discussed. The non-Newtonian indexes and the activation energies of viscous how are obtained. The results show that the apparent viscosity of PPS/PA-66 blends is not sensitive to shear rate and stress, but decreases with the elevation of temperature. On the contrary, the apparent viscosity of the PPS decreases obviously with the increasing of shear rate and shear stress, but it is increased by the elevation of temperature.展开更多
基金Sichuan Province Science and Technology Support Program (2022JDTD0016,2020YFG0176)Chengdu Science and Technology (2021-RC02-00005-CG)+5 种基金Sichuan Golden-Elephant Sincerity Chemical Co.,Ltd (HX2020019)Zigong City Science and Technology (2019CXRC01,2020YGJC13)Opening Project of Material Corrosion and Protection Key Laboratory of Sichuan Province (2019CL05,2020CL19,2018CL07)Opening Project of Sichuan Province,the Foundation of Introduced Talent of Sichuan University of Science and Engineering (2017RCL16,2019RC05,2019RC07,2020RC16)the Opening Project of Key Laboratories of Fine Chemicals and Surfactants in Sichuan Provincial Universities (2020JXY04)Xi’an Weijingyi Art and Culture Communication Co.,Ltd (HX2021385)。
文摘To date,there is no research that deals with biological waste as fillers in polyphenylene sulfide(PPS).In this study,oyster shells were recycled and treated to prepare thermally-treated oyster shells(TOS),which were used as PPS fillers to make new bio-based antibacterial composite materials.The effect of varying the content of TOS was studied by means of structure and performance characterization.PPS/TOS composites were demonstrated to have an antibacterial effect on the growth of E coli and S.aureus.Qualitative analysis showed that when the TOS content was≥30%and 40%,the composite materials had an apparent inhibition zone.Quantitative analysis showed that the antibacterial activity increased with the TOS content.Fourier transform infrared spectroscopy indicated the formation of hydrogen bonds between the molecular chains of TOS and PPS and the occurrence of a coordination reaction.At 10%TOS,the composite tensile strength reached a maximum value of 72.5 MPa,which is 9.65%higher than that of pure PPS.The trend of bending properties is the same as that of tensile properties,showing that the maximum property was reached for the composite with 10%TOS.At the same time,the crystallinity and contact angle were the highest,and the permeability coefficient was the lowest.The fatigue test results indicated that for the composite with 10%TOS,the tensile strength was 23%lower than static tensile strength,and the yield strength was 10%lower than the static yield strength.The results of the study showed that TOS not only could reduce the cost of PPS,but also could impart antibacterial properties and enhance the mechanical and,barrier properties,the thermostability,as well as the crystallinity.
基金Funded by the National Natural Science Foundation of China(No.21404023)the Foundation of State Key Laboratory for Modification of Chemical Fibers and Polymer Materials(No.LK1417)the Fundamental Research Funds for the Central Universities(2232015D-10)
文摘The effect of pressure-induced flow（PIF） processing on the mechanical properties of noncontinuous carbon fiber（CF） reinforced polyphenylene sulfide（PPS） composites was investigated. A series of CF/PPS composites under different processing conditions were prepared through PIF-processing. SEM observations showed that the interfaces adhesion between CFs and PPS became stronger and ductile fracture mainly occurred in PPS matrix. This brought to a great increase of both strength and toughness by about 2 folds, when the composites were processed at 240 ℃ and under 263 MPa. The results in differential scanning calorimetry（DSC） and X-ray diffraction（XRD） measurements indicated more regular crystalline structures and orientation of lamellae formed during PIF-processing.
文摘Fluororesin-based anti-corrosive coatings including graded FEP/PPS were prepared on carbon steel by melt powder coating, the bonding strength of all coating systems was determined by the pull-off test. It is found that the poor adhesion of fluororesin coatings to metallic substrates is improved obviously by the graded coating structure of FEP/PPS, and the bonding strength reaches up to 11.8 MPa for the five-layer system. Examination by electron probe microanalysis （EPMA） verifies that the distribution of main components is graded in the five-layer system, which is responsible for the enhancement of the interfacial bonding.
基金This work was supported by the National High Technology Program Fund(863)of China.
文摘Blends of polyphenylene sulfide (PPS) containing trace amounts of branching and/or cross-linking in chain and Polyamide-66 (PA-66) have been prepared by melt blending. The rheological behavior of PPS/PA-66 blends has been studied by means of capillary rheometer, and compared with PPS. The effects of shear rate, shear stress and temperature on the how of PPS/PA-66 blends and PPS are discussed. The non-Newtonian indexes and the activation energies of viscous how are obtained. The results show that the apparent viscosity of PPS/PA-66 blends is not sensitive to shear rate and stress, but decreases with the elevation of temperature. On the contrary, the apparent viscosity of the PPS decreases obviously with the increasing of shear rate and shear stress, but it is increased by the elevation of temperature.
