Parametric optimization of power system for a micro-CCHP system

The universal mathematical model of an engine is established,and an economical zone,in which an engine mainly provides medium output load at medium speed,is presented.Based on the experimental data and the universal model of such an engine above,a mathematical model of a refitted engine is provided.The boundary of the corresponding economical zone is further demarcated,and the optimal operating curve and the operating point of the engine are analyzed.Then,the energy transforming models of the power system are established in the mode of cooling,heating and power（MCHP）,the mode of heating and power（MHP）and the mode of electricity powering（MEP）.The parameter matching of the power system is optimized according to the transmission ratios of the gear box in the power distribution system.The results show that,in the MCHP,the speed transmission ratio of the engine to the gear box（ies）and the speed transmission ratio of the motor to the gear box（ims）are defined as 2.9 and 1,respectively;in the MHP,when the demand load of the power system is less than the low critical load of the economical zone,the speed transmission ratio of the motor to the engine（ime）is equal to 1,and when the demand load of the power system exceeds the low critical load of the economical zone,ime equals 0.85;in the MEP,the optimal value of ims is defined as 2.5.

ICU患者置入Power PICC导管特殊异位原因分析

目的:探讨ICU患者置入Power PICC导管后头端反折向上至同侧和对侧锁骨下静脉、头臂静脉等特殊异位的相关因素。方法:回顾性分析2021年9月至2022年9月某三甲医院ICU 520例PICC置管患者,通过胸部X线确定PICC导管头端反折向上至对侧和同侧锁骨下静脉、头臂静脉的患者,分析其特殊异位发生因素。结果:胸部X线结果显示25例患者PICC管头端反折向上异位至对侧和同侧锁骨下静脉、头臂静脉或颈内静脉,异位发生率4.8%,不同静脉置管反折异位发生率相比差异无统计学意义,P>0.05。结论:ICU患者PICC置入发生导管头端反折向上至同侧和对侧锁骨下静脉、头臂静脉等特殊异位的发生因素较多,包括同时留置CVC或血透管、正在滴注或泵入多种药物、PICC管头端异位的隐匿性、导管材质、自身疾病及机械通气等危险因素。

基于CHPS的万古霉素安全性及临床应用研究

参考中国医院药物警戒系统(CHPS)的数据,观察和评价上市后注射用万古霉素实际用药情况,为提高安全用药水平、优化用法用量提供更多临床线索和依据,更好的指导临床用药。方法:结合中国医院药物警戒系统(CHPS)数据,依从医院信息系统(HIS、),提取使用万古霉素住院患者信息,运用统计学方法进行分析。结果:(1)从CHPS系统调取2020年1月至2023年10月注射用万古霉素不良反应上报数据共有11例,其中7例为一般的,1例新的(干呕);3例严重的。(2)从HIS系统调取2020年1月至2023年10月期间使用万古霉素患者227例,其中男136例(59.91%),女91例(40.09%);年龄<18岁的69例(30.40%),年龄>19岁的有158例(69.60%);实行万古霉素血药浓度监测(TDM)的患者有32例(14.1%),未实施TDM监测的有195例(85.9%);227例使用万古霉素患者中有25例出现不良反应,发生率为11.01%。结论:(1)不良反应上报不及时,CHPS系统数据与HIS系统数据不一致;(2)万古霉素血药浓度监测结果部分偏低,未达到治疗浓度,达标率低(40.62%);(3)万古霉素使用存在一定不良反应风险,尤其是急性肾损伤风险高。

CHPPO工艺氧化液耦合除杂技术的研究与工业应用

异丙苯过氧化氢法(CHPPO)是生产环氧丙烷的绿色新工艺,然而如何从异丙苯氧化液中脱除有机酸和Na+等杂质一直是CHPPO工艺的关键问题。针对现有碱水洗单元洗涤塔设备投资高、占地面积大、传质效果不佳等问题,通过小试和中试实验,开发了基于静态混合和聚结分离的耦合除杂技术,并研究了一系列操作条件对耦合技术分离性能的影响,实现了异丙苯氧化液高效除杂。结果表明,在NaOH溶液浓度为1.5%,碱液用量为氧化液进料量的4%~5%、纯水用量3%~5%、自循环量10%~15%的条件下,处理后的氧化液总酸含量低于10 mg/L,Na+低于0.5 mg/L。此外,耦合除杂技术在某石化工业装置上实现了首次工业应用,处理后的氧化液有机酸含量为33 mg/L、Na^(+)含量为0.4 mg/L,满足环氧化工段对前处理的技术要求,同时减少了5%的碱、水用量,显著增加了装置的绿色属性。该技术为解决氧化液深度净化问题和促进环氧丙烷合成工艺的发展提供了一种极具前景的选择。

绿证与改进型阶梯式碳交易互动机制下的CHP系统低碳经济调度研究

为了进一步降低热电联产型源荷系统的碳排放量,同时兼顾经济效益,文章改进了普通阶梯式碳交易的交易模型,提出了一种绿证与改进型阶梯式碳交易互动机制下的CHP型源荷系统低碳经济调度策略。构建热电联供型能源系统模型,确定能源测、转换侧、负荷侧模型,同时构建需求响应机制;在数学模型的基础上构建双层调度模型,上层模型是改进型阶梯式碳交易优化模型,利用差分进化算法来实现阶梯式碳交易参数自适应变化;下层源荷系统调度仿真模型,以系统运行成本为目标函数,耦合了碳交易机制和绿证策略,实现直接、间接同时减排,同时利用Cplex求解器进行最优化求解。最后,建立四种典型场景,对比分析得出所提策略能显著降低碳排放量,同时具有较好的经济效益,能够为源荷系统低碳经济调度提供参考。

Power-V诱导的钻柱黏滑振动特征分析

黏滑是石油钻井过程中影响钻井效率和井下钻柱安全的一种振动形式.垂直钻井系统Power-V在提供有效控斜力的同时,还会诱导钻柱黏滑振动.通过研究垂直钻井系统Power-V与井壁的接触作用及钻头与地层的相互作用模型,基于钻柱动力学有限元方法,深入分析Power-V的作用机理,研究其对扭转振动的影响,指出Power-V和井壁间的相互作用会导致钻柱与井壁的摩阻显著增加,进而引起摩阻扭矩的增大,诱导井下黏滑振动.实测振动数据证实,Power-V与井壁间的相互作用是引起钻柱黏滑振动的关键因素.这对于揭示黏滑振动的成因和更好地发挥Power-V的作用具有重要意义.

基于调和概率语言术语集的Power平均算子

实践发现现存概率语言Power平均算子在应用中存在概率信息丢失、计算过于繁琐等问题,针对这些问题,提出一种基于调和概率语言术语集的Power平均算子。结合新的基本运算法则与新的支撑度,给出新的概率语言Power平均算子、概率语言Power几何平均算子、概率语言Power加权平均算子、概率语言Power加权几何平均算子,同时论证分析了这几类新型算子的性质。最后通过实验数据,将提出的算子与现存算子进行对比分析,验证了所提算子的有效性与可行性。

数据可视化Power BI在职业院校学生管理中的应用

职业院校学生管理是一个重要而复杂的任务,需要学校管理人员的精心组织和有效执行。随着信息技术的发展和校园信息化建设的需求,部分职业院校的学生管理服务系统已初步建成。BI数据可视化可以有效地利用大量的系统数据,为院校管理者提高决策和治理水平提供依据。本文通过对BI数据可视化过程和结构进行分析,比较Power BI与传统型BI的差异,通过对Power BI数据可视化在职业院校学生管理中的应用分析和实践案例,验证数据可视化PowerBI在学生管理中的重要作用。

基于GT-Power的排气轰鸣噪声控制与优化研究

针对某1.5T三缸发动机车型排气尾管噪声在1 280 r/min、1 550 r/min转速下出现轰鸣声的问题,对其排气系统消声器结构进行优化设计,从而达到消除该轰鸣声的目标。分析了排气尾管轰鸣声的产生原因,并解释了轰鸣产生的机理,得出该轰鸣声是消声器在96~116 Hz下消声量不足的结论。通过GT-Power软件基于传递损失仿真结果优化了排气系统消声器结构,并建立发动机模型,与优化后的排气系统模型进行噪声仿真,仿真结果满足优化要求。在整车半消声室中进行了排气尾管噪声测试试验,测试结果验证了分析结果的准确性,且优化方案排气尾管轰鸣声消失,中高转速下噪声降低2 dB(A)

Computing Power Network:A Survey

With the rapid development of cloud computing,edge computing,and smart devices,computing power resources indicate a trend of ubiquitous deployment.The traditional network architecture cannot efficiently leverage these distributed computing power resources due to computing power island effect.To overcome these problems and improve network efficiency,a new network computing paradigm is proposed,i.e.,Computing Power Network(CPN).Computing power network can connect ubiquitous and heterogenous computing power resources through networking to realize computing power scheduling flexibly.In this survey,we make an exhaustive review on the state-of-the-art research efforts on computing power network.We first give an overview of computing power network,including definition,architecture,and advantages.Next,a comprehensive elaboration of issues on computing power modeling,information awareness and announcement,resource allocation,network forwarding,computing power transaction platform and resource orchestration platform is presented.The computing power network testbed is built and evaluated.The applications and use cases in computing power network are discussed.Then,the key enabling technologies for computing power network are introduced.Finally,open challenges and future research directions are presented as well.

Power BI在我院药品数据可视化中的应用

目的加强医院药品精细化管理,提升药师对药品的数据分析能力,实现数据分析自动化及查询功能,为集采药品、麻精药品的动态监管提供数据支撑。方法使用数据可视化工具Power BI搭建服务,制作报表,能够查询药品使用情况和对比情况,实现各科室药品使用情况的可视化管理。结果通过该软件,药师可以精确查询任意时间维度下药品的使用数量、金额等情况,实现数据分析自动化。结论借助数据管理工具能够帮助药师提升数据分析能力和工作效率,有助于加强医院药品的精细化管控。

Carbon emission reduction:Contribution of photovoltaic power and practice in China

As a clean and renewable form of energy,photovoltaic(PV)power generation converts solar energy into electrical energy,reducing the consumption of fossil fuels and significantly lowering greenhouse gas emissions.Amidst the global transition towards cleaner forms of energy,countries all around the world are vigorously developing PV technology.

Traction power systems for electrified railways:evolution,state of the art,and future trends

Traction power systems(TPSs)play a vital role in the operation of electrified railways.The transformation of conventional railway TPSs to novel structures is not only a trend to promote the development of electrified railways toward high-efficiency and resilience but also an inevitable requirement to achieve carbon neutrality target.On the basis of sorting out the power supply structures of conventional AC and DC modes,this paper first reviews the characteristics of the existing TPSs,such as weak power supply flexibility and low-energy efficiency.Furthermore,the power supply structures of various TPSs for future electrified railways are described in detail,which satisfy longer distance,low-carbon,high-efficiency,high-reliability and high-quality power supply requirements.Meanwhile,the application prospects of different traction modes are discussed from both technical and economic aspects.Eventually,this paper introduces the research progress of mixed-system electrified railways and traction power supply technologies without catenary system,speculates on the future development trends and challenges of TPSs and predicts that TPSs will be based on the continuous power supply mode,employing power electronic equipment and intelligent information technology to construct a railway comprehensive energy system with renewable energy.

基于Power BI的DRGs数据分析方法

目的:探讨利用Power BI工具对DRGs数据进行有效分析,揭示潜在的数据特征和规律。方法:运用Power BI工具对2017年―2021年DRGs数据进行数据连接、数据清洗和处理等操作,提取和计算相关DRGs评价指标,最后通过可视化展示的方式对DRGs数据进行分析和呈现,从不同维度和角度深入研究DRGs数据特征和规律。结果:通过对2017年―2021年DRGs数据处理和可视化展示,能直观了解出院患者疾病构成、医疗资源利用、临床质量评估和医疗成本效益等总体情况,为提高医疗服务质量和资源利用效率等提供可行的解决方案。结论:基于Power BI的DRGs数据分析方法能够有效地帮助医院进行医疗费用控制和资源配置,并提高医疗服务的质量和效率。此方法为优化DRGs数据管理和医疗资源配置提供了重要的参考和借鉴价值。

Power BI在移民信息管理中的应用研究

信息技术的应用是提高水利工程移民信息化水平的重要手段,针对现有移民信息管理系统灵活性和通用性低的问题,分析了微软Power BI系列软件实现移民信息管理的可行性。以山东省老岚水库移民项目为例,使用该软件依次快捷完成移民信息的收集、整理和分析工作,并设计出交互式可视化界面,从多个维度展示和查询各类移民信息以及实现移民数据的多端实时共享。研究表明:运用Power BI系列软件虽然在结合地理信息方面仍存在不足,但能够以较低的使用难度和投入成本完成移民信息管理及可视化工作,提高工作效率。验证了其在移民信息管理方面的实用性和适用性,具备一定的推广价值。

Field test of high-power microwave-assisted mechanical excavation for deep hard iron ore

Microwave-assisted mechanical excavation has great application prospects in mines and tunnels,but there are few field experiments on microwave-assisted rock breaking.This paper takes the Sishanling iron mine as the research object and adopts the self-developed high-power microwave-induced fracturing test system for hard rock to conduct field experiments of microwave-induced fracturing of iron ore.The heating and reflection evolution characteristics of ore under different microwave parameters(antenna type,power,and working distance)were studied,and the optimal microwave parameters were obtained.Subsequently,the ore was irradiated with the optimal microwave parameters,and the cracking effect of the ore under the action of the high-power open microwave was analyzed.The results show that the reflection coefficient(standing wave ratio)can be rapidly(<5 s)and automatically adjusted below the preset threshold value(1.6)as microwave irradiation is performed.When using a right-angle horn antenna with a working distance of 5 cm,the effect of automatic reflection adjustment reaches the best among other antenna types and working distances.When the working distance is the same,the average temperature of the irradiation surface and the area of the high-temperature area under the action of the two antennas(right-angled and equal-angled horn antenna)are basically the same and decrease with the increase of working distance.The optimal microwave parameters are:a right-angle horn antenna with a working distance of 5 cm.Subsequently,in further experiments,the optimal parameters were used to irradiate for 20 s and 40 s at a microwave power of 60 kW,respectively.The surface damage extended 38 cm×30 cm and 53 cm×30 cm,respectively,and the damage extended to a depth of about 50 cm.The drilling speed was increased by 56.2%and 66.5%,respectively,compared to the case when microwaves were not used.

A Novel Multiple DBC-staked units Package to Parallel More Chips for SiC Power Module

Silicon carbide(SiC) power modules play an essential role in the electric vehicle drive system. To improve their performance, reduce their size, and increase production efficiency, this paper proposes a multiple staked direct bonded copper(DBC) unit based power module packaging method to parallel more chips. This method utilizes mutual inductance cancellation effect to reduce parasitic inductance. Because the conduction area in the new package is doubled, the overall area of power module can be reduced. Entire power module is divided into smaller units to enhance manufacture yield, and improve design freedom. This paper provides a detailed design, analysis and fabrication procedure for the proposed package structure. Additionally, this paper offers several feasible solutions for the connection between power terminals and DBC untis. With the structure, 18dies were paralleled for each phase-leg in a econodual size power module. Both simulation and double pulse test results demonstrate that, compared to conventional layouts, the proposed package method has 74.8% smaller parasitic inductance and 34.9% lower footprint.

Demonstration of a small‐scale power generator using supercritical CO_(2)

The supercritical CO_(2)(sCO_(2))power cycle could improve efficiencies for a wide range of thermal power plants.The sCO_(2)turbine generator plays an important role in the sCO_(2)power cycle by directly converting thermal energy into mechanical work and electric power.The operation of the generator encounters challenges,including high temperature,high pressure,high rotational speed,and other engineering problems,such as leakage.Experimental studies of sCO_(2)turbines are insufficient because of the significant difficulties in turbine manufacturing and system construction.Unlike most experimental investigations that primarily focus on 100 kW‐or MW‐scale power generation systems,we consider,for the first time,a small‐scale power generator using sCO_(2).A partial admission axial turbine was designed and manufactured with a rated rotational speed of 40,000 rpm,and a CO_(2)transcritical power cycle test loop was constructed to validate the performance of our manufactured generator.A resistant gas was proposed in the constructed turbine expander to solve the leakage issue.Both dynamic and steady performances were investigated.The results indicated that a peak electric power of 11.55 kW was achieved at 29,369 rpm.The maximum total efficiency of the turbo‐generator was 58.98%,which was affected by both the turbine rotational speed and pressure ratio,according to the proposed performance map.

基于Power BI的三级公立医院绩效考核病案首页指标数据分析与可视化展示

目的在三级公立医院绩效考核背景下,探寻一种基于Power BI的数据统计分析及可视化展示方法,提高医院统计人员数据统计及分析效率。通过可视化助力日常指标监测,推动医疗管理的效率和质量提升,辅助管理决策。方法提取某三甲医院2022年1月1日至2023年6月30日的病案首页数据,根据三级公立医院绩效考核病案首页指标数据统计口径,建立基于Power BI的三级公立医院绩效考核病案首页指标数据查询系统,进行数据分析及可视化展示。结果基于Power BI的三级公立医院绩效考核病案首页指标数据查询系统可快速查询多维度、多场景的指标数据,具有实用性及易操作性。结论Power BI可作为医院统计工作人员进行数据分析及可视化展示的工具,值得推广使用。医院统计工作人员可结合本研究将Power BI运用于实际工作中,提高工作效率,助力日常统计工作。

A frequency servo SoC with output power stabilization loop technology for miniaturized atomic clocks

A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.