Effects of Different Spatial Resolutions on Prediction Accuracy of Thunnus alalunga Fishing Ground in Waters Near the Cook Islands Based on Long Short-Term Memory(LSTM)Neural Network Model

Albacore tuna(Thunnus alalunga)is one of the target species of tuna longline fishing,and waters near the Cook Islands are a vital albacore tuna fishing ground.Marine environmental data are usually presented with different spatial resolutions,which leads to different results in tuna fishery prediction.Study on the impact of different spatial resolutions on the prediction accuracy of albacore tuna fishery to select the best spatial resolution can contribute to better management of albacore tuna resources.The nominal catch per unit effort(CPUE)of albacore tuna is calculated according to vessel monitor system(VMS)data collected from Chinese distantwater fishery enterprises from January 1,2017 to May 31,2021.A total of 26 spatiotemporal and environmental factors,including temperature,salinity,dissolved oxygen of 0–300 m water layer,chlorophyll-a concentration in the sea surface,sea surface height,month,longitude,and latitude,were selected as variables.The temporal resolution of the variables was daily and the spatial resolutions were set to be 0.5°×0.5°,1°×1°,2°×2°,and 5°×5°.The relationship between the nominal CPUE and each individual factor was analyzed to remove the factors irrelavant to the nominal CPUE,together with a multicollinearity diagnosis on the factors to remove factors highly related to the other factors within the four spatial resolutions.The relationship models between CPUE and spatiotemporal and environmental factors by four spatial resolutions were established based on the long short-term memory(LSTM)neural network model.The mean absolute error(MAE)and root mean square error(RMSE)were used to analyze the fitness and accuracy of the models,and to determine the effects of different spatial resolutions on the prediction accuracy of the albacore tuna fishing ground.The results show the resolution of 1°×1°can lead to the best prediction accuracy,with the MAE and RMSE being 0.0268 and 0.0452 respectively,followed by 0.5°×0.5°,2°×2°and 5°×5°with declining prediction accuracy.The results suggested that 1)albacore tuna fishing ground can be predicted by LSTM;2)the VMS records the data in detail and can be used scientifically to calculate the CPUE;3)correlation analysis,and multicollinearity diagnosis are necessary to improve the prediction accuracy of the model;4)the spatial resolution should be 1°×1°in the forecast of albacore tuna fishing ground in waters near the Cook Islands.

A higher prediction accuracy–based alpha–beta filter algorithm using the feedforward artificial neural network

The alpha–beta filter algorithm has been widely researched for various applications,for example,navigation and target tracking systems.To improve the dynamic performance of the alpha–beta filter algorithm,a new prediction learning model is proposed in this study.The proposed model has two main components:(1)the alpha–beta filter algorithm is the main prediction module,and(2)the learning module is a feedforward artificial neural network(FF‐ANN).Furthermore,the model uses two inputs,temperature sensor and humidity sensor data,and a prediction algorithm is used to predict actual sensor readings from noisy sensor readings.Using the novel proposed technique,prediction accuracy is significantly improved while adding the feed‐forward backpropagation neural network,and also reduces the root mean square error(RMSE)and mean absolute error(MAE).We carried out different experiments with different experimental setups.The proposed model performance was evaluated with the traditional alpha–beta filter algorithm and other algorithms such as the Kalman filter.A higher prediction accuracy was achieved,and the MAE and RMSE were 35.1%–38.2%respectively.The final proposed model results show increased performance when compared to traditional methods.

AI Method for Improving Crop Yield Prediction Accuracy Using ANN

Crop Yield Prediction(CYP)is critical to world food production.Food safety is a top priority for policymakers.They rely on reliable CYP to make import and export decisions that must be fulfilled before launching an agricultural business.Crop Yield(CY)is a complex variable influenced by multiple factors,including genotype,environment,and their interactions.CYP is a significant agrarian issue.However,CYP is the main task due to many composite factors,such as climatic conditions and soil characteristics.Machine Learning(ML)is a powerful tool for supporting CYP decisions,including decision support on which crops to grow in a specific season.Generally,Artificial Neural Networks(ANN)are usually used to predict the behaviour of complex non-linear models.As a result,this research paper attempts to determine the correlations between climatic variables,soil nutrients,and CYwith the available data.InANN,threemethods,Levenberg-Marquardt(LM),Bayesian regularisation(BR),and scaled conjugate gradient(SCG),are used to train the neural network(NN)model and then compared to determine prediction accuracy.The performance measures of the training,as declared above,such as Mean Squared Error(MSE)and correlation coefficient(R),were determined to assess the ANN models that had been built.The experimental study proves that LM training algorithms are better,while BR and SCG have minimal performance.

Prediction Model of Wax Deposition Rate in Waxy Crude Oil Pipelines by Elman Neural Network Based on Improved Reptile Search Algorithm

A hard problem that hinders the movement of waxy crude oil is wax deposition in oil pipelines.To ensure the safe operation of crude oil pipelines,an accurate model must be developed to predict the rate of wax deposition in crude oil pipelines.Aiming at the shortcomings of the ENN prediction model,which easily falls into the local minimum value and weak generalization ability in the implementation process,an optimized ENN prediction model based on the IRSA is proposed.The validity of the new model was confirmed by the accurate prediction of two sets of experimental data on wax deposition in crude oil pipelines.The two groups of crude oil wax deposition rate case prediction results showed that the average absolute percentage errors of IRSA-ENN prediction models is 0.5476% and 0.7831%,respectively.Additionally,it shows a higher prediction accuracy compared to the ENN prediction model.In fact,the new model established by using the IRSA to optimize ENN can optimize the initial weights and thresholds in the prediction process,which can overcome the shortcomings of the ENN prediction model,such as weak generalization ability and tendency to fall into the local minimum value,so that it has the advantages of strong implementation and high prediction accuracy.

Effects of Mapping Methods on Accuracy of Protein Coding Regions Prediction

[Objective] To discuss the effects of major mapping methods for DNA sequence on the accuracy of protein coding regions prediction,and to find out the effective mapping methods.[Method] By taking Approximate Correlation（AC） as the full measure of the prediction accuracy at nucleotide level,the windowed narrow pass-band filter（WNPBF） based prediction algorithm was applied to study the effects of different mapping methods on prediction accuracy.[Result] In DNA data sets ALLSEQ and HMR195,the Voss and Z-Curve methods are proved to be more effective mapping methods than paired numeric（PN）,Electron-ion Interaction Potential（EIIP） and complex number methods.[Conclusion] This study lays the foundation to verify the effectiveness of new mapping methods by using the predicted AC value,and it is meaningful to reveal DNA structure by using bioinformatics methods.

Using machine learning to improve the accuracy of genomic prediction of reproduction traits in pigs

Background:Recently,machine learning(ML)has become attractive in genomic prediction,but its superiority in genomic prediction over conventional(ss)GBLUP methods and the choice of optimal ML methods need to be investigated.Results:In this study,2566 Chinese Yorkshire pigs with reproduction trait records were genotyped with the GenoBaits Porcine SNP 50 K and PorcineSNP50 panels.Four ML methods,including support vector regression(SVR),kernel ridge regression(KRR),random forest(RF)and Adaboost.R2 were implemented.Through 20 replicates of fivefold cross-validation(CV)and one prediction for younger individuals,the utility of ML methods in genomic prediction was explored.In CV,compared with genomic BLUP(GBLUP),single-step GBLUP(ssGBLUP)and the Bayesian method BayesHE,ML methods significantly outperformed these conventional methods.ML methods improved the genomic prediction accuracy of GBLUP,ssGBLUP,and BayesHE by 19.3%,15.0% and 20.8%,respectively.In addition,ML methods yielded smaller mean squared error(MSE)and mean absolute error(MAE)in all scenarios.ssGBLUP yielded an improvement of 3.8% on average in accuracy compared to that of GBLUP,and the accuracy of BayesHE was close to that of GBLUP.In genomic prediction of younger individuals,RF and Adaboost.R2_KRR performed better than GBLUP and BayesHE,while ssGBLUP performed comparably with RF,and ssGBLUP yielded slightly higher accuracy and lower MSE than Adaboost.R2_KRR in the prediction of total number of piglets born,while for number of piglets born alive,Adaboost.R2_KRR performed significantly better than ssGBLUP.Among ML methods,Adaboost.R2_KRR consistently performed well in our study.Our findings also demonstrated that optimal hyperparameters are useful for ML methods.After tuning hyperparameters in CV and in predicting genomic outcomes of younger individuals,the average improvement was 14.3% and 21.8% over those using default hyperparameters,respectively.Conclusion:Our findings demonstrated that ML methods had better overall prediction performance than conventional genomic selection methods,and could be new options for genomic prediction.Among ML methods,Adaboost.R2_KRR consistently performed well in our study,and tuning hyperparameters is necessary for ML methods.The optimal hyperparameters depend on the character of traits,datasets etc.

Prognostic Kalman Filter Based Bayesian Learning Model for Data Accuracy Prediction

Data is always a crucial issue of concern especially during its prediction and computation in digital revolution.This paper exactly helps in providing efficient learning mechanism for accurate predictability and reducing redundant data communication.It also discusses the Bayesian analysis that finds the conditional probability of at least two parametric based predictions for the data.The paper presents a method for improving the performance of Bayesian classification using the combination of Kalman Filter and K-means.The method is applied on a small dataset just for establishing the fact that the proposed algorithm can reduce the time for computing the clusters from data.The proposed Bayesian learning probabilistic model is used to check the statistical noise and other inaccuracies using unknown variables.This scenario is being implemented using efficient machine learning algorithm to perpetuate the Bayesian probabilistic approach.It also demonstrates the generative function forKalman-filer based prediction model and its observations.This paper implements the algorithm using open source platform of Python and efficiently integrates all different modules to piece of code via Common Platform Enumeration(CPE)for Python.

Trajectory Control: Directional MWD Inversely New Wellbore Positioning Accuracy Prediction Method

The deviation control of directional drilling is essentially the controlling of two angles of the wellbore actually drilled, namely, the inclination and azimuth. In directional drilling the bit trajectory never coincides exactly with the planned path, which is usually a plane curve with straight, building, holding, and dropping sections in succession. The drilling direction is of course dependant on the direction of the resultant forces acting on the bit and it is quite a tough job to hit the optimum target at the hole bottom as required. The traditional passive methods for correcting the drilling path have not met the demand to improve the techniques of deviation control. A method for combining wellbore surveys to obtain a composite, more accurate well position relies on accepting the position of the well from the most accurate survey instrument used in a given section of the wellbore. The error in each position measurement is the sum of many independent root sources of error effects. The relationship between surveys and other influential factors is considered, along with an analysis of different points of view. The collaborative work describes, establishes a common starting point of wellbore position uncertainty model, definition of what constitutes an error model, mathematics of position uncertainty calculation and an error model for basic directional service.

Error Prediction in Industrial Robot Machining: Optimization Based on Stiffness and Accuracy Limit

Among the advantages of using industrial robots for machining applications instead of machine tools are flexibility, cost effectiveness, and versatility. Due to the kinematics of the articulated robot, the system behaviour is quite different compared with machine tools. Two major questions arise in implementing robots in machining tasks: one is the robot’s stiffness, and the second is the achievable machined part accuracy, which varies mainly due to the huge variety of robot models. This paper proposes error prediction model in the application of industrial robot for machining tasks, based on stiffness and accuracy limits. The research work includes experimental and theoretical parts. Advanced machining and inspection tools were applied, as well as a theoretical model of the robot structure and stiffness based on the form-shaping function approach. The robot machining performances, from the workpiece accuracy point of view were predicted.

Comparison of sampling schemes for spatial predictionof soil organic carbon in Northern China

Determining an optimal sample size is a key step in designing field surveys,and is particularly important for detecting the spatial pattern of highly variable properties such as soil organic carbon(SOC).Based on 550 soil sampling points in the nearsurface layer(0 to 20 cm)in a representative region of northern China's agro-pastoral ecotone,we studied effects of four interpolation methods such as ordinary kriging(OK),universal kriging(UK),inverse distance weighting(IDW)and radial basis function(RBF)and random subsampling(50,100,200,300,400,and 500)on the prediction accuracy of SOC estimation.When the Shannon's Diversity Index(SHDI)and Shannon's Evenness Index(SHEI)was 2.01 and 0.67,the OK method appeared to be a superior method,which had the smallest root mean square error(RMSE)and the mean error(ME)nearest to zero.On the contrary,the UK method performed poorly for the interpolation of SOC in the present study.The sample size of 200 had the most accurate prediction;50 sampling points produced the worst prediction accuracy.Thus,we used 200 samples to estimate the study area's soil organic carbon density(SOCD)by the OK method.The total SOC storage to a depth of 20 cm in the study area was 117.94 Mt,and its mean SOCD was 2.40 kg/m2.The SOCD kg/(C⋅m2)of different land use types were in the following order:woodland(3.29)>grassland(2.35)>cropland(2.19)>sandy land(1.55).

Postoperative serum tumor markers-based nomogram predicting early recurrence for patients undergoing radical resections of pancreatic ductal adenocarcinoma

BACKGROUND Early recurrence(ER)is associated with dismal outcomes in patients undergoing radical resection for pancreatic ductal adenocarcinoma(PDAC).Approaches for predicting ER will help clinicians in implementing individualized adjuvant therapies.Postoperative serum tumor markers(STMs)are indicators of tumor progression and may improve current systems for predicting ER.AIM To establish an improved nomogram based on postoperative STMs to predict ER in PDAC.METHODS We retrospectively enrolled 282 patients who underwent radical resection for PDAC at our institute between 2019 and 2021.Univariate and multivariate Cox regression analyses of variables with or without postoperative STMs,were performed to identify independent risk factors for ER.A nomogram was constructed based on the independent postoperative STMs.Receiver operating characteristic curve analysis was used to evaluate the area under the curve(AUC)of the nomogram.Survival analysis was performed using Kaplan-Meier survival plot and log-rank test.RESULTS Postoperative carbohydrate antigen 19-9 and carcinoembryonic antigen levels,preoperative carbohydrate antigen 125 levels,perineural invasion,and pTNM stage III were independent risk factors for ER in PDAC.The postoperative STMs-based nomogram(AUC:0.774,95%CI:0.713-0.835)had superior accuracy in predicting ER compared with the nomogram without postoperative STMs(AUC:0.688,95%CI:0.625-0.750)(P=0.016).Patients with a recurrence nomogram score(RNS)>1.56 were at high risk for ER,and had significantly poorer recurrence-free survival[median:3.08 months,interquartile range(IQR):1.80-8.15]than those with RNS≤1.56(14.00 months,IQR:6.67-24.80),P<0.001).CONCLUSION The postoperative STMs-based nomogram improves the predictive accuracy of ER in PDAC,stratifies the risk of ER,and identifies patients at high risk of ER for tailored adjuvant therapies.

Stock Prediction Based on Technical Indicators Using Deep Learning Model

Stock market trends forecast is one of the most current topics and a significant research challenge due to its dynamic and unstable nature.The stock data is usually non-stationary,and attributes are non-correlative to each other.Several traditional Stock Technical Indicators(STIs)may incorrectly predict the stockmarket trends.To study the stock market characteristics using STIs and make efficient trading decisions,a robust model is built.This paper aims to build up an Evolutionary Deep Learning Model(EDLM)to identify stock trends’prices by using STIs.The proposed model has implemented the Deep Learning(DL)model to establish the concept of Correlation-Tensor.The analysis of the dataset of three most popular banking organizations obtained from the live stock market based on the National Stock exchange(NSE)-India,a Long Short Term Memory(LSTM)is used.The datasets encompassed the trading days from the 17^(th) of Nov 2008 to the 15^(th) of Nov 2018.This work also conducted exhaustive experiments to study the correlation of various STIs with stock price trends.The model built with an EDLM has shown significant improvements over two benchmark ML models and a deep learning one.The proposed model aids investors in making profitable investment decisions as it presents trend-based forecasting and has achieved a prediction accuracy of 63.59%,56.25%,and 57.95%on the datasets of HDFC,Yes Bank,and SBI,respectively.Results indicate that the proposed EDLA with a combination of STIs can often provide improved results than the other state-of-the-art algorithms.

Re-estimation and comparisons of alternative accounting based bankruptcy prediction models for Indian companies

Background:The suitability and performance of the bankruptcy prediction models is an empirical question.The aim of this paper is to develop a bankruptcy prediction model for Indian manufacturing companies on a sample of 208 companies consisting of an equal number of defaulted and non-defaulted firms.Out of 208 companies,130 are used for estimation sample,and 78 are holdout for model validation.The study reestimates the accounting based models such as Altman EI(Journal of Finance 23:19189-209,1968)Z-Score,Ohlson JA(Journal of Accounting Research 18:109-131,1980)Y-Score and Zmijewski ME(Journal of Accounting Research 22:59-82,1984)X-Score model.The paper compares original and re-estimated models to explore the sensitivity of these models towards the change in time periods and financial conditions.Methods:Multiple Discriminant Analysis(MDA)and Probit techniques are employed in the estimation of Z-Score and X-Score models,whereas Logit technique is employed in the estimation of Y-Score and the newly proposed models.The performance of all the original,re-estimated and new proposed models are assessed by predictive accuracy,significance of parameters,long-range accuracy,secondary sample and Receiver Operating Characteristic(ROC)tests.Results:The major findings of the study reveal that the overall predictive accuracy of all the three models improves on estimation and holdout sample when the coefficients are re-estimated.Amongst the contesting models,the new bankruptcy prediction model outperforms other models.Conclusions:The industry specific model should be developed with the new combinations of financial ratios to predict bankruptcy of the firms in a particular country.The study further suggests the coefficients of the models are sensitive to time periods and financial condition.Hence,researchers should be cautioned while choosing the models for bankruptcy prediction to recalculate the models by looking at the recent data in order to get higher predictive accuracy.

Prediction of the Shearing Property of Worsted Fabrics Using BP Neural Network

In this paper, three layers of BP neural network were used to model the shearing properties of worsted fabrics. We train the neural network models with 27 kinds of fabrics, and then use 6 kinds of fabrics to validate the accuracy of the model. The result shows that the predicted accuracy of the models is about 85%.

Research on Federated Learning Data Sharing Scheme Based on Differential Privacy

To realize data sharing,and to fully use the data value,breaking the data island between institutions to realize data collaboration has become a new sharing mode.This paper proposed a distributed data security sharing scheme based on C/S communication mode,and constructed a federated learning architecture that uses differential privacy technology to protect training parameters.Clients do not need to share local data,and they only need to upload the trained model parameters to achieve data sharing.In the process of training,a distributed parameter update mechanism is introduced.The server is mainly responsible for issuing training commands and parameters,and aggregating the local model parameters uploaded by the clients.The client mainly uses the stochastic gradient descent algorithm for gradient trimming,updates,and transmits the trained model parameters back to the server after differential processing.To test the performance of the scheme,in the application scenario where many medical institutions jointly train the disease detection system,the model is tested from multiple perspectives by taking medical data as an example.From the testing results,we can know that for this specific test dataset,when the parameters are properly configured,the lowest prediction accuracy rate is 90.261%and the highest accuracy rate is up to 94.352.It shows that the performance of the model is good.The results also show that this scheme realizes data sharing while protecting data privacy,completes accurate prediction of diseases,and has a good effect.

Adaptive Learning Video Streaming with QoE in Multi-Home Heterogeneous Networks

In recent years,real-time video streaming has grown in popularity.The growing popularity of the Internet of Things(IoT)and other wireless heterogeneous networks mandates that network resources be carefully apportioned among versatile users in order to achieve the best Quality of Experience(QoE)and performance objectives.Most researchers focused on Forward Error Correction(FEC)techniques when attempting to strike a balance between QoE and performance.However,as network capacity increases,the performance degrades,impacting the live visual experience.Recently,Deep Learning(DL)algorithms have been successfully integrated with FEC to stream videos across multiple heterogeneous networks.But these algorithms need to be changed to make the experience better without sacrificing packet loss and delay time.To address the previous challenge,this paper proposes a novel intelligent algorithm that streams video in multi-home heterogeneous networks based on network-centric characteristics.The proposed framework contains modules such as Intelligent Content Extraction Module(ICEM),Channel Status Monitor(CSM),and Adaptive FEC(AFEC).This framework adopts the Cognitive Learning-based Scheduling(CLS)Module,which works on the deep Reinforced Gated Recurrent Networks(RGRN)principle and embeds them along with the FEC to achieve better performances.The complete framework was developed using the Objective Modular Network Testbed in C++(OMNET++),Internet networking(INET),and Python 3.10,with Keras as the front end and Tensorflow 2.10 as the back end.With extensive experimentation,the proposed model outperforms the other existing intelligentmodels in terms of improving the QoE,minimizing the End-to-End Delay(EED),and maintaining the highest accuracy(98%)and a lower Root Mean Square Error(RMSE)value of 0.001.

Modelling an Efficient URL Phishing Detection Approach Based on a Dense Network Model

The social engineering cyber-attack is where culprits mislead the users by getting the login details which provides the information to the evil server called phishing.The deep learning approaches and the machine learning are compared in the proposed system for presenting the methodology that can detect phishing websites via Uniform Resource Locator(URLs)analysis.The legal class is composed of the home pages with no inclusion of login forms in most of the present modern solutions,which deals with the detection of phishing.Contrarily,the URLs in both classes from the login page due,considering the representation of a real case scenario and the demonstration for obtaining the rate of false-positive with the existing approaches during the legal login pages provides the test having URLs.In addition,some model reduces the accuracy rather than training the base model and testing the latest URLs.In addition,a feature analysis is performed on the present phishing domains to identify various approaches to using the phishers in the campaign.A new dataset called the MUPD dataset is used for evaluation.Lastly,a prediction model,the Dense forward-backwards Long Short Term Memory(LSTM)model(d−FBLSTM),is presented for combining the forward and backward propagation of LSMT to obtain the accuracy of 98.5%on the initiated login URL dataset.

Earlier Detection of Alzheimer’s Disease Using 3D-Convolutional Neural Networks

The prediction of mild cognitive impairment or Alzheimer’s disease(AD)has gained the attention of huge researchers as the disease occurrence is increasing,and there is a need for earlier prediction.Regrettably,due to the highdimensionality nature of neural data and the least available samples,modelling an efficient computer diagnostic system is highly solicited.Learning approaches,specifically deep learning approaches,are essential in disease prediction.Deep Learning(DL)approaches are successfully demonstrated for their higher-level performance in various fields like medical imaging.A novel 3D-Convolutional Neural Network(3D-CNN)architecture is proposed to predict AD with Magnetic resonance imaging(MRI)data.The proposed model predicts the AD occurrence while the existing approaches lack prediction accuracy and perform binary classification.The proposed prediction model is validated using the Alzheimer’s disease Neuro-Imaging Initiative(ADNI)data.The outcomes demonstrate that the anticipated model attains superior prediction accuracy and works better than the brain-image dataset’s general approaches.The predicted model reduces the human effort during the prediction process and makes it easier to diagnose it intelligently as the feature learning is adaptive.Keras’experimentation is carried out,and the model’s superiority is compared with various advanced approaches for multi-level classification.The proposed model gives better prediction accuracy,precision,recall,and F-measure than other systems like Long Short Term Memory-Recurrent Neural Networks(LSTM-RNN),Stacked Autoencoder with Deep Neural Networks(SAE-DNN),Deep Convolutional Neural Networks(D-CNN),Two Dimensional Convolutional Neural Networks(2D-CNN),Inception-V4,ResNet,and Two Dimensional Convolutional Neural Networks(3D-CNN).

A new model for predicting the total tree height for stems cut-to-length by harvesters in Pinus radiata plantations

A new model for predicting the total tree height for harvested stems from cut-to-length(CTL)harvester data was constructed for Pinus radiata(D.Don)following a conceptual analysis of relative stem profi les,comparisons of candidate models forms and extensive selections of predictor variables.Stem profi les of more than 3000 trees in a taper data set were each processed 6 times through simulated log cutting to generate the data required for this purpose.The CTL simulations not only mimicked but also covered the full range of cutting patterns of nearly 0.45×106 stems harvested during both thinning and harvesting operations.The single-equation model was estimated through the multipleequation generalized method of moments estimator to obtain effi cient and consistent parameter estimates in the presence of error correlation and heteroscedasticity that were inherent to the systematic structure of the data.The predictive performances of our new model in its linear and nonlinear form were evaluated through a leave-one-tree-out cross validation process and compared against that of the only such existing model.The evaluations and comparisons were made through benchmarking statistics both globally over the entire data space and locally within specifi c subdivisions of the data space.These statistics indicated that the nonlinear form of our model was the best and its linear form ranked second.The prediction accuracy of our nonlinear model improved when the total log length represented more than 20%of the total tree height.The poorer performance of the existing model was partly attributed to the high degree of multicollinearity among its predictor variables,which led to highly variable and unstable parameter estimates.Our new model will facilitate and widen the utilization of harvester data far beyond the current limited use for monitoring and reporting log productions in P.radiata plantations.It will also facilitate the estimation of bark thickness and help make harvester data a potential source of taper data to reduce the intensity and cost of the conventional destructive taper sampling in the fi eld.Although developed for P.radiata,the mathematical form of our new model will be applicable to other tree species for which CTL harvester data are routinely captured during thinning and harvesting operations.

Research on Anti-noise Processing Method of Production Signal Based on Ensemble Empirical Mode Decomposition(EEMD)

The grain production prediction is one of the most important links in precision agriculture. In the process of grain production prediction, mechanical noise caused by the factors of difference in field topography and mechanical vibration will be mixed in the original signal, which undoubtedly will affect the prediction accuracy. Therefore, in order to reduce the influence of vibration noise on the prediction accuracy, an adaptive Ensemble Empirical Mode Decomposition(EEMD) threshold filtering algorithm was applied to the original signal in this paper: the output signal was decomposed into a finite number of Intrinsic Mode Functions(IMF) from high frequency to low frequency by using the Empirical Mode Decomposition(EMD) algorithm which could effectively restrain the mode mixing phenomenon; then the demarcation point of high and low frequency IMF components were determined by Continuous Mean Square Error criterion(CMSE), the high frequency IMF components were denoised by wavelet threshold algorithm, and finally the signal was reconstructed. The algorithm was an improved algorithm based on the commonly used wavelet threshold. The two algorithms were used to denoise the original production signal respectively, the adaptive EEMD threshold filtering algorithm had significant advantages in three denoising performance indexes of signal denoising ratio, root mean square error and smoothness. The five field verification tests showed that the average error of field experiment was 1.994% and the maximum relative error was less than 3%. According to the test results, the relative error of the predicted yield per hectare was 2.97%, which was relative to the actual yield. The test results showed that the algorithm could effectively resist noise and improve the accuracy of prediction.