Field testing of shear strength of granite residual soils

The characteristics of residual soils are very different from those of sedimentary soils.Although the strength characteristics of sedimentary soils have been studied extensively,the shear strength characteristics of granitic residual soils(GRS)subjected to the weathering of parent rocks have rarely been investigated.In this study,the shear strength characteristics of GRS in the Taishan area of southeast China(TSGRS)were studied by field and laboratory tests.The field tests consisted of a cone penetration test(CPT),borehole shear test(BST),self-boring pressuremeter test(SBPT),and seismic dilatometer Marchetti test(SDMT).The shortcomings of laboratory testing are obvious,with potential disturbances arising through the sampling,transportation,and preparation of soil samples.Due to the special structure of GRS samples and the ease of disturbance,the results obtained from laboratory tests were generally lower than those obtained from situ tests.The CPT and scanning electron microscopy(SEM)results indicated significant weathering and crustal hardening in the shallow TSGRS.This resulted in significant differences in the strength and strength parameters of shallow soil obtained by the BST.Based on the SDMT and SBPT results,a comprehensive evaluation method of shear strength for TSGRS was proposed.The SBPT was suitable for evaluating the strength of shallow GRS.The material index(ID)and horizontal stress index(KD)values obtained by the SDMT satisfied the empirical relationship proposed by Marchetti based on the ID index,and were therefore considered suitable for the evaluation of the shear strength of deep GRS.

Effect of soaking time of dithionite-citrate-bicarbonate solution on strength and deformation characteristics of lateritic soil

This study aimed to reveal the influence of different free-iron-oxides contents on the strength and deformation characteristics of in situ lateritic soil.A test method that combined the selective chemical dissolution method and in situ Ménard pressuremeter test(PMT)was proposed.The soaking time in dithioniteecitrateebicarbonate(DCB)solution was used as a variable to control the free-iron-oxides content in lateritic soil.Then,the in situ lateritic soil boreholes with different soaking time were tested by PMT.The results showed that the in situ horizontal pressure p0,critical edge pressure pf,ultimate pressure prediction pl,pressuremeter modulus Em,shear modulus Gm,and foundation-bearing capacity f0k of lateritic soil decreased rapidly after immersing in DCB solution within 1e4 d.With increasing soaking time,the decrease rate reduced gradually.Moreover,the relationship curve between free-iron-oxides content and soaking time declined rapidly and then stabilized,and the free-iron-oxides content at the inflection point was 30.11 g/kg.When the free-iron-oxides content changed to the inflection point,the free-iron-oxides that played a cementing role was largely removed,indicating that the effective cementing iron-content of Miaoling lateritic soil was about 52.9%.This study demonstrated that the proposed test method can determine the influence of free-iron-oxides content on the strength and deformation characteristics of lateritic soil.

Dynamic and Field Analysis of Pile Driving in Cameroun

Complexity and implementation of design norms in Cameroon required a proven foreign expertise, but nowadays local engineers are mastering modern construction techniques. They are turning to pile foundations to solve the problem of construction sites on weak soils. The objective of this work is to present the trend of the country pile-driving capacity of some foundations design and construction companies. The proposed analytical method is based on Finite Element Method and on the theory of wave＇s propagation and transmission along the pile taking into account experimental data on the construction site. The proposed method is validated through recorded data during the construction of the Mungo Bridge in Cameroon, and obtained analytical results are in agreement with experimental results.

Experimental Geotechnical Characterization Campaign of the Matam Soil for Lithology: Application to the Study of Supports of the Balterdi Bridge

This paper presents a geotechnical study whose objective is to determine the lithology of the soil of Balterdi village (Matam, Senegal). A bridge-type structure with six supports is to be built on the studied site. The drilling program consisted of six core drillings (SC) each 30 m deep with sampling and six destructive drillings with pressuremeter tests (SP) every 1.5 m up to 30 m deep. A pair of core and pressuremeter tests was carried out under each support. From the results of the core drill holes and the geological model of the site, it can be seen that the lithology of the soil along the structure consists essentially of soft clay layers, becoming firm at depth over the first 18 m on average (with some incursions of sandy layers) resting on medium to compacted sand up to 30 m. Brown clayey fill is also present between piers P3 and P5. The presence of a watercourse along the structure is noted. The foundations will therefore be carried out in the water. The results of the pressuremeter tests confirm the homogeneity of the soil over the whole area. Indeed, the values obtained are almost similar for all the tests. According to the limit pressures obtained, the clayey-sandy formations encountered along the structure are respectively soft to firm and moderately compact to compact. Their limit pressures are high enough to allow good bearing capacities.

Pressure-controlled elliptical cavity expansion under anisotropic initial stress: Elastic solution and its application

This paper presents an elastic solution to the pressure-controlled elliptical cavity expansion problem under the anisotropic stress conditions. The problem is formulated by the assumption that an initial elliptical cavity is expanded under a uniform pressure and subjected to an in-plane initial horizontal pressure Kσ_0 and vertical pressure σ_0 at infinity. A conformal mapping technique is used to map the outer region of the initial elliptical cavity in the physical plane onto the inner region of a unit circle in the phase plane. Using the complex variable theory, the stress functions are derived; hence, the stress and displacement distributions around the elliptical cavity wall can be obtained. Furthermore, a closed-form solution to the pressure-expansion relationship is presented based on the elastic solution to the stress and displacement. Next, the proposed analytical solutions are validated by comparing with the Kirsch's solution and the finite element method(FEM). The solution to the presented pressure-controlled elliptical cavity expansion can be applied to two cases in practice. One is to employ the solution to the interpretation of the shear modulus of the soil or rocks and the in-situ stress in the pre-bored pressuremeter test under the lateral anisotropic initial stress condition. The other is the interpretation of the membrane expansion of a flat dilatometer test using the pressure-controlled elliptical cavity expansion solution. The two cases in practice confirm the usefulness of the present analytical solution.

Calibration of soil parameters based on intelligent algorithm using efficient sampling method

This study combined a neural network and Latin hypercube sampling(LHS)to calibrate soil parameters.The Monte Carlo parameters were calibrated by generating different numbers of training samples for pressuremeter tests and excavations.The results showed that when the number of samples was 25 or 50,the parameter calibration accuracy was very high.However,the improvement in accuracy did not increase significantly with a further increase in the number of samples,but tended to be stable.The number of training samples was set at 50 to strike a balance between the calibration accuracy and efficiency for four parameters.For 25 groups of samples,the calibration results using LHS were better than those using orthogonal sampling.Compared to stochastic optimization algorithms,a neural network combined with LHS could significantly reduce the calibration time.This method was applied to actual foundation pit engineering in China.The results showed that using the proposed calibration method clearly improved the accuracy when predicting the deformation induced by the excavation.