Distribution Line Longitudinal ProtectionMethod Based on Virtual Measurement Current Restraint

As an effective approach to achieve the“dual-carbon”goal,the grid-connected capacity of renewable energy increases constantly.Photovoltaics are the most widely used renewable energy sources and have been applied on various occasions.However,the inherent randomness,intermittency,and weak support of grid-connected equipment not only cause changes in the original flow characteristics of the grid but also result in complex fault characteristics.Traditional overcurrent and differential protection methods cannot respond accurately due to the effects of unknown renewable energy sources.Therefore,a longitudinal protection method based on virtual measurement of current restraint is proposed in this paper.The positive sequence current data and the network parameters are used to calculate the virtual measurement current which compensates for the output current of photovoltaic(PV).The waveform difference between the virtual measured current and the terminal current for internal and external faults is used to construct the protection method.An improved edit distance algorithm is proposed to measure the similarity between virtual measurement current and terminal measurement current.Finally,the feasibility of the protection method is verified through PSCAD simulation.

Changes of coastline and tidal flat and its implication for ecological protection under human activities: Take China’s Bohai Bay as an example

The change processes and trends of shoreline and tidal flat forced by human activities are essential issues for the sustainability of coastal area,which is also of great significance for understanding coastal ecological environment changes and even global changes.Based on field measurements,combined with Linear Regression(LR)model and Inverse Distance Weighing(IDW)method,this paper presents detailed analysis on the change history and trend of the shoreline and tidal flat in Bohai Bay.The shoreline faces a high erosion chance under the action of natural factors,while the tidal flat faces a different erosion and deposition patterns in Bohai Bay due to the impact of human activities.The implication of change rule for ecological protection and recovery is also discussed.Measures should be taken to protect the coastal ecological environment.The models used in this paper show a high correlation coefficient between observed and modeling data,which means that this method can be used to predict the changing trend of shoreline and tidal flat.The research results of present study can provide scientific supports for future coastal protection and management.

Optimization of Freeze-drying Protective Agents for Lactobacillus plantarum KLDS1.0391 by Response Surface Methodology

In this study, the Single Factor Test（SFT） was used to optimize the pre-freezing conditions of L. plantarum KLDS1.0391（KLDS1.0391）. Further, the Freeze-Drying Protective Agents（FDPA） of KLDS1.0391 was optimized by Response Surface Methodology（RSM）. The optimum pretreatment conditions were as the follows： initial concentration of KLDS1.0391 was 1011 CFU · m L-1 and KLDS1.0391 was pre-freezed at –80℃ for 8 h to achieve the survival rate of 46.21%. The main components of FDPA were skim milk, sucrose, sodium glutamate and Tween-80. And the influence of four factors on the survival rate of KLDS1.0391 in freeze-drying was in order as the follows： skim milk〉sucrose〉Tween-80〉sodium glutamate. The optimal FDPA composition was skim milk 11.3%, sucrose 9.8%, sodium glutamate 5.1% and Tween-80 0.2%. Under the above conditions, the survival rate of the cells was 82.98%. Comparing the predicted values, the relative error was 0.37% and the difference was not significant, which indicated that the established model could effectively reflect the actual protection of FDPA to KLDS1.0391.

Capacity of surface warship's protective bulkhead subjected to blast loading

The protective bulkhead of the large surface warship need to be designed working in the membrane mode. In this paper, a formula is derived for calculating the plastic deformation of the protective bulkhead subjected to blast loading by the energy method, and the ultimate capability of the protective bulkhead can be calculated. The design demand of the protective bulkhead is discussed. The calculation is compared with external experiments, which indicates that the formula is of great application value.

Comparative analysis of structural characteristics and cardiomyocyte protective effects of glucomannan extracted from Bletilla striata using varied methods

Doxorubicin(DOX)is a widely employed tumor therapy,yet its substantial toxic side effects pose a considerable challenge.Bletilla striata has demonstrated efficacy in preventing and treating these toxic side effects in clinical practice,with polysaccharides identified as the principal active component.In the present study,16 fractions of B.striata polysaccharides(BsPs)were extracted using diverse methods,including hot-water extraction(HWE),ultrasonic-assisted extraction(UAE),enzyme-assisted extraction(EAE),dilute acid-water extraction(ACWE),and dilute alkali-water extraction(ALWE).These extractions were subsequently precipitated at final ethanol concentrations of 80%and 95%,respectively.The investigation encompassed yields,total carbohydrate content(TCC),total protein content(TPC),preliminary structural properties,and anti-DOX myocardial cytotoxic activity.Results indicated that the extraction method significantly influenced the physicochemical properties,associated functional properties,and anti-DOX myocardial cytotoxic activity of BsPs.HWE and UAE yielded higher BsPs quantities.The relative molecular weight(RMW)distribution of BsPs differed notably between HWE or UAE,EAE,ACWE,and ALWE.The RMW of primary BsPs obtained from HWE and UAE(1.9×10^(7)-1.7×10^(7) Da)exceeded that from EAE(7.5×10^(3)-2.8×10^(4) Da)and ALWE(5.1×10^(4)-1.7×10^(4) Da),with smaller molecular weights primarily precipitated by higher ethanol concentrations.BsPs were composed of Man and Glu,with partial fractions containing small amounts of Gal or Ara,displaying varying molar ratios.Notably,BsPs from ACWE exhibited the most significant structural differences,lacking 1,4-α-D-Glcp and a triple-helical structure.Furthermore,BsPs obtained from HWE,UAE,and EAE demonstrated heightened anti-DOX myocardial cytotoxic activity compared to other methods.This study underscored the influence of extraction methods on BsPs’structure and myocardial protective activity,offering a foundation for exploring structural diversity and employing specific extraction methods to extract polysaccharides with robust myocardial protective properties efficiently.

The protective performance of a molten salt frozen wall in the process of fluoride volatility of uranium

The fluoride volatility method (FVM) is a technique tailored to separate uranium from fuel salt of molten salt reactors. A key challenge in R&D of the FVM is corrosion due to the presence of molten salt and corrosive gases at high temperature. In this work, a frozen-wall technique was proposed to produce a physical barrier between construction materials and corrosive reactants. The protective performance of the frozen wall against molten salt was assessed using FLiNaK molten salt with introduced fluorine gas, which was regarded as a simulation of the FVM process. SS304, SS316L, Inconel 600 and graphite were chosen as the test samples. The extent of corrosion was characterized by an analysis of weight loss and scanning electron microscope studies. All four test samples suffered severe corrosion in the molten salt phase with the corrosion resistance as: Inconel 600>SS316L>graphite>SS304. The presence of the frozen wall could protect materials against corrosion by molten salt and corrosive gases, and compared with materials exposed to molten salt, the corrosion rates of materials protected by the frozen wall were decreased by at least one order of magnitude.

Research on Protection Methods of Historic and Cultural Villages in Zhejiang Province

By the investigation of a few historical and cultural villages in Zhejiang Province,some problems during the process of protecting these villages were found,like similar construction pattern,coarse quality of construction,etc. which caused that villages were losing their characters. For this situation,the protection method of historical cultural villages was put forward,which was that to connect excavating character of different village with maintaining spatial fabrics of historical villages,and that different classes of building should have corresponding protection approach. Some advices were proposed for repairing and promoting historic and cultural elements,natural environment,and constructing infrastructure in the village,which will provide a reference for the construction of other historical and cultural villages.

Theories and Methods of Landscape Architecture Heritage Protection

This paper firstly made an overview of foreign and domestic theories and methods of landscape architecture heritage protection.It studied the landscape architecture heritage from policies and regulations,investment management,talent cultivation,and popular science education.Then,it discussed problems of landscape architecture heritage protection in China:lack of legislation,weak awareness of heritage resources,overdevelopment of heritage resources,and vacancy in management and monitoring of heritage resources.Finally,it came up with recommendations that competent authorities of Chinese government should attach greater importance to heritage management,talent cultivation,and fund input,integrate with advanced management methods of developed countries,and exploring a landscape architecture heritage protection and management mode suitable for national conditions of China at levels of thought,methods,and technology.

Experimental Research on the Erosion Pattern and Protection Using the Extended Modelling Method

In the paper the extended modelling method with serial sands is used in an experimental research on the erosion patterns at the discharge outlet of a beach Hua-Neng power plant. The theoretical basis for the extended modelling method with serial sands is systematically presented in the paper and the method has been successfully employed in the sediment experiment of coastal works. According to the Froude Law, the model is designed to be a normal one with movable bed, the geometric scale lambda(L) = lambda(H) = 15, and three scales of sediment grain size are chosen, i.e., lambda(d1) = 0.207; lambda(d2) = 0.393; and lambda(d3) = 0.656. The median particle diameter of sea beach prototype sand d(50p) = 0.059 mm and the dis-changed water flow of the power plant is 21.7 m(3) / s. Three types of natural sea sands have been chosen as the serial modelling sands to extend the simulation of the prototype, thus replacing the conventional test in which artificial lightweight sands are used. As a result, this method can not only reduce the cost significantly, but also it is an advanced technique easy to use. Upon a series of tests, satisfactory results have been obtained.

Finite Element Method Applied to Fuse Protection Design

In a poloidal field （PF） converter module, fuse protection is of great importance to ensure the safety of the thyristors. The fuse is pre-selected in a traditional way and then verified by finite element analysis. A 3D physical model is built by ANSYS software to solve the thermal- electric coupled problem of transient process in case of external fault. The result shows that this method is feasible.

Surface Protection Methods against Fretting Fatigue for TC11 Titanium Alloy

The influence of various surface coatings, including flame sprayed Cu、 plasma sprayed Cu Ni In、 exploding sprayed WC/Co Ⅰ and plasma sprayed WC/Co Ⅱ, on fretting fatigue resistance for TC11 titanium alloy at 20℃ and 500℃ is studied. The results show that the plasma sprayed WC/Co Ⅱ coating has good protection performance and makes the fretting fatigue strength of TC11 titanium alloy raise 40% at both 20℃ and 500℃. The fretting fatigue strength of TC11 alloy with Cu coating is increased about 62% at 20℃, but the protection performance at 500℃ is not so good as that at 20℃.

Computation of Protection Zone of a Lightning Rod Using Method of Moments and Monte Carlo Integration Technique

An accurate determination of lightning protection zone is an important issue in the analysis and design of an appropri-ate lightning protection system. This paper presents a fast and accurate protection zone determination methodology for metallic lightning rod. The methodology is based on Quasi Monte Carlo Integration technique applied to Method of Moments (MoM) solution of Integral Equations. As an example, solution of the integral equation for unknown charge distribution on lightning rod is obtained. The electric field in the region surrounding the rod is then computed and the protection zone plotted accordingly. The effect of the thickness of the rod on the protection zone is also studied.

Protection and Control Method of the Newly Built Underground Pipelines in the Embankment of Yangtze River

In the year of 2011, in the emergency reinforcement project of the main dike of Yangtze River in Luhe District, Nanjing City, four underground pipelines were vertically crossed with the embankment. In this project, each pipeline had been es- tablished independent culvert structure for protection and high pressure injection method had been used for the foundation treatment. To extend the length of the foot of slope and to improve the impermeable capacity of the dike, additional com- posite geomembranes had been installed in the riverside slope. By optimizing the construction program and enhancing the settlement observation during the constrution period, the safe operation of the pipelines had therefore been ensured.

Evaluation of the Effectiveness of Three Methods of Protecting Guinea Fowl from Mortalities Used in Traditional Breeding in Northern Togo

A study on the evaluation of the effectiveness of three traditional methods of protecting guinea fowl from mortality was carried out at CRA-SS （Centre de Recherche Agronomique de la Savane S6che） in northem Togo. Guinea fowl were divided into 5 batches, of which 3 batches received prophylactic medical treatment including plant decoctions, the 4th batch was followed by a medical prophylaxis program as a control group and the 5th batch considered as a negative control, has not received any prophylactic treatment. The results showed that a mortality rate of 25% for the reference lot and two other batches which received plant decoctions （Euphorbia poissonii or Khaya senegalensis） were recorded against a rate of 87.5% in the batch of guinea fowl which received the decoction of Pteleopsis suberosa. Meanwhile, regardless of weight growth, daily average gain （GMQ） or food consumption, no significant difference was observed （p 〉 0.05） between the guinea fowl that received a baseline health monitoring and those having taken the decoction orE. poissonii. On the other hand, the values recorded in these two batches of guinea fowl differed statistically from those in the guinea fowl that received the decoction of K. senegalensis. Although the decoction of K. senegalensis has a protective effect in guinea fowl, the growth of guinea fowl has been slowed down. On the basis of these results, it appears that two endogenous practices tested （K. senegalensis or E. poissonii） have positive effects. However, it would be desirable to carry out a toxicity test in order to determine the recommended doses.

The evolution of central environmental protection inspection policy attention in China: An investigation based on inspection reports

The central environmental protection inspection (CEPI) system in China is a significant institutional innova‐tion in national environmental governance. The CEPI applies a joint supervision strategy to address salient en‐vironmental issues and strictly enforce the environmental responsibilities of local governments. This study col‐lects and organizes CEPI inspection reports covering three stages that encompass the first round, the “look back”, and the second round, applying text analysis to obtain sample data and conduct statistical quantifica‐tion of word frequency in inspection reports and identify notable changes. The study explores the allocation of CEPI attention between policy objectives and the intensity of policy instruments. We determine that in con‐junction with public opinion feedback, the CEPI conducts targeted inspections and focuses more on pollutant governance, which has high severity and can be addressed quickly. The CEPI fills the gap of normalized gover‐nance with a campaign-style governance approach. Regarding the intensity of policy measures, the CEPI pri‐marily uses economic incentive policy instruments, supplemented by command-and-control and public guid‐ance approaches, advancing the sustainability of regulatory effectiveness through economic, social, and politi‐cal activities. This study extends knowledge in the field of CEPI policy priorities and implementation, expand‐ing the literature related to outcomes of environmental policy in developing countries.

Numerical Estimation of the Thermal Response of Thermal Protective Clothing-Air Gap-Human Skin Micro-system

Thermal protective clothing has been recognized as the primary shielding against emergency fire hazard and inflammable gas leakage. Therefore,the thermal response of human covered with thermal protective clothing under high temperature is the key work to investigate the thermal insulation of thermal protective clothing. A coupling model composed of thermal protective clothing,air gap and human skin is established and the temperature of the micro-system is numerically solved via the finite element method( FEM).Especially,the heat transfer of air gap located between clothing and human skin considering conduction and radiation is established while the human skin layers involve the effect of blood perfusion. Then the effect of thermophysical properties( thermal conductivity and volumetric capacity) of fabric and thickness of fabric and air on the thermal response of the micro-system is elucidated and compared.The results indicate that the volumetric heat capacity of fabric is the key parameter to affect the thermal shielding performance of thermal protective clothing,and the thicker fabric thickness and air gap thickness can improve the thermal protective properties of the micro-system.

Layered Metal Composites: Newest Generation of Radiation-Protective Materials

The expediency of development of one of the newest highly effective radiation-protective materials—layered composites of “light metal/heavy metal” type is substantiated. The characteristics of the internal architecture of composites of Al/Pb type made by consecutive application of vacuum and normal atmospheric rolling are adduced. The differences between the radioisotope and accelerating techniques of experimental testing of radiation-protective properties of materials are described. The results of the testing of composites and the influence of their structure on radiation-protective properties of the investigated materials are characterized. It is shown that the radiation-protective efficiency of composites certain structures may be 30% - 40% higher than the aluminum. This gives the opportunity to reduce the weight of radiation-protective structure at preservation of effectiveness of protection at aluminum level, or to increase the effectiveness of protection at constant weight of this structure.

联邦学习中的攻击手段与防御机制研究综述

联邦学习的攻防技术是联邦学习系统安全的核心问题。联邦学习的攻防技术能大幅降低联邦学习系统被攻击的风险,明显提升联邦学习系统的安全性。深入了解联邦学习的攻防技术,可以推进联邦学习领域的研究,实现联邦学习的广泛应用。因此,对联邦学习的攻防技术进行研究具有十分重要的意义。简要地介绍了联邦学习的概念、基本工作流程、类型及可能存在的安全问题;介绍联邦学习系统可能遭受到的攻击,梳理了相关研究;从联邦学习系统有无目标性的防御措施出发,将防御措施分为通用性防御措施及针对性防御措施两类,并对其进行了针对性的总结;对联邦学习安全性未来的研究方向进行了梳理与分析,为相关研究者在联邦学习安全性方面的研究工作提供了参考。

风电场集电线路单相接地故障柔性电压消弧与动态保护新原理

为解决风电场集电系统长期存在的线路单相接地故障处理难题,提出风电场中性点柔性接地方式,理论推导获得柔性接地风电场三序等效电路,与集电线路单相接地故障复合序网模型,建立风电场零序电压柔性调控理论,提出集电线路单相接地故障柔性电压消弧方法,可主动将故障点电压及故障残流迅速抑制到零,实现单相接地故障电弧的可靠消除。进一步提出基于零序电流动态增量的高阻故障辨识与保护方法,通过柔性调控零序补偿电流,逐渐放大故障残流,实现永久性单相接地故障的灵敏感知与保护。利用PSCAD/EMTDC搭建含双馈异步风电机(doubly-fedinduction generator,DFIG)的规模化风电场模型,模拟多种运行与故障条件对所提方法进行验证,仿真结果表明,该方法能够在考虑系统不平衡电压的情况下精准调控集电线路故障点电压,实现瞬时性单相接地故障快速可靠消弧,动态感知并持续抑制永久性单相接地故障残流,实现集电线路高阻接地故障的灵敏保护。该技术有望提升风电场运行灵活性与故障防御能力,有力保障新能源电能外送的持续性、可靠性。