Based on the ESI-MS and ^(13)C-NMR analysis of the forms of glyoxal in acidic and alkaline solutions,the soy-based adhesive cross-linked by glyoxal was prepared in this work.The results showed that glyoxal existed in ...Based on the ESI-MS and ^(13)C-NMR analysis of the forms of glyoxal in acidic and alkaline solutions,the soy-based adhesive cross-linked by glyoxal was prepared in this work.The results showed that glyoxal existed in water in different forms at different pH levels.Under alkaline conditions,glyoxal transformed to glycolate through the intramolecular disproportionation reaction.Under acidic conditions,although some of glyoxal transformed to glycolate as what happened under alkaline conditions,most of glyoxal molecules existed in the form of fiveor six-membered cyclic ether structure.No ethylene tetraol or free aldehyde group was actually detected under these conditions.Although glyoxal reacted with soy protein under both acidic and alkaline conditions,alkaline conditions were more favorable for the improvement of mechanical performance and water resistance of soybased adhesives than acid conditions.展开更多
Finer nanoplates of silver are prepared by self-assembly on the surface of graphene,and the low-temperature sintered high conductivity ink containing the silver nanoplates is prepared.Most importantly,graphene is adde...Finer nanoplates of silver are prepared by self-assembly on the surface of graphene,and the low-temperature sintered high conductivity ink containing the silver nanoplates is prepared.Most importantly,graphene is added to the solution before the chemical reduction reaction occurs.Firstly,it is found that silver nanoplates have self-assembly phenomenon on the surface of graphene.Secondly,the Ag nano hexagonal platelets(AgNHPs)with small particle sizes(10 nm),narrow distribution and good dispersion are prepared.Especially,smaller sizes(10 nm)and narrower particle size distribution of AgNHPs particles can be easily controlled by using this process.Finally,the conductivity of the ink is excellent.For example,when the printed patterns were sintering at 150℃,the resistivity of the ink(GE:0.15 g/L)reached the minimum value of 2.2×10^-6 cm.And the resistivity value was 3.7×10^-6Ωcm,when it was sintered at 100℃ for 30 min.The conductive ink prepared can be used for the field of printing electronics as ink-jet printing ink.展开更多
Soy protein-based composite film is a potential replacement for petroleum-based film with multipurpose applica-tions and cleaner production.It is difficult to improve both the tensile strength and toughness of a prote...Soy protein-based composite film is a potential replacement for petroleum-based film with multipurpose applica-tions and cleaner production.It is difficult to improve both the tensile strength and toughness of a protein-based film without sacrificing its elongation.In this study,inspired by the hierarchical structure of nacre,a facile yet delicate strategy was developed to fabricate a novel bio-based film with excellent toughness and high strength.Triglycidylamine(TGA)crosslinked soy protein(SPI)as hard phase and thermoplastic polyurethane elastomer(TPU)as soft phase comprise an alternative lay-up hierarchical structure.The interface of these two phases is enhanced using triglycidylamine(TGA)surface-modified TPU(MTPU).The tensile strength of SPI/MTPU/TGA films increases by 392%to 7.78 MPa and their toughness increases by 391%to 8.50 MJ/m^(3) compared to soy protein/glycerol film.The proposed hierarchical structure can also be extended to other high-performance materials and polymers.展开更多
Protein baitsprays were produced from many different sources for the controlling fruit flies in the integrated pest management program around the world.Here,fruit fly baits were formulated based on cost-effective bait...Protein baitsprays were produced from many different sources for the controlling fruit flies in the integrated pest management program around the world.Here,fruit fly baits were formulated based on cost-effective bait mixtures such as local jaggery,brewers spent grain(BSG),apple cider vinegar,wheat bran powder and local red wine with the fresh enzyme from papaya and pineapple.Fruit fly Baits were prepared by mixing the small amount of local detergent as insecticide.Our results indicated that the best efficient fruit fly bait for area wide integrated pest management(AW-IPM)is the BSG-based bait whereas the second efficient bait is local red wine-based bait.The highest fruit fly per trap per day(FTD)value by BSG-based bait traps was discovered.The highest female captured percentage is BSG-based bait with papaya solution.The field analysis of one week and one month old protein-based bait showed that FTD values decreased slightly while only one month old wheat bran-based bait dropped to the base.The BSG-based baits analysis is effective not only female fruit flies but also cockroaches male in Myanmar’s tropical region.Thus our results reveal that the efficient protein-based bait is the fresh BSG-based bait with papaya solution.展开更多
Ink-jet printing of ceramic thick films is one of low cost on-site ceramic pattern fabrication methods.It is necessary to investigate the rheological behaviour of ceramic inks and drying behaviour of droplets.Two kind...Ink-jet printing of ceramic thick films is one of low cost on-site ceramic pattern fabrication methods.It is necessary to investigate the rheological behaviour of ceramic inks and drying behaviour of droplets.Two kinds of BaTiO3 ceramic inks were prepared by mechanical mixing and sol-gel methods,respectively.The effect of preparation parameters,such as quantity of polyacrylic acid(PAA)and solid content,on physicochemical and rheologic properties of the ceramic inks was investigated.The results show that they satisfy the requirements of continuous ink-jet printing.The appearances of printed dots and single printed layers were observed by SEM.The SEM images indicate that dots printed with mixing method ink are in ring shape,and dots printed with sol-gel method ink are in pancake shape,so the printed layer surface with the latter ink is smoother.The causes of these phenomena were discussed.展开更多
In this work, we study the stability of a class of materials obtained by printing a textile with conductive inks using a method called screen printing. Under the action of a certain external factors, the printed circu...In this work, we study the stability of a class of materials obtained by printing a textile with conductive inks using a method called screen printing. Under the action of a certain external factors, the printed circuit suffers deterioration and the conductivity decreases considerably. In this work, we propose to model the overall damage of the textile sheet in terms of the partial damages of the conductive lines. We also apply this approach to evaluate the damage of a system being made of transmission lines printed into nonwoven substrates using different conductive inks.展开更多
While the practice of tattooing has existed for thousands of years, it has recently begun growing in popularity in the US. With the increasing prevalence of tattoos, the methods and inks involved in the tattooing proc...While the practice of tattooing has existed for thousands of years, it has recently begun growing in popularity in the US. With the increasing prevalence of tattoos, the methods and inks involved in the tattooing process have also developed. Tattoos now use many brightly colored inks, often made using metal-based pigments. There is concern that chemicals may be present in tattoo inks in concentrations that may lead to human health concerns either during application or removal of tattoos. Since exposure to metals has been linked to tremors, liver damage, memory loss, cognitive loss, and even death, there is concern about the prevalence of metals in tattoo inks in general. To this end, a survey of 226 commercial tattoo inks was performed and each ink was analyzed for the presence of heavy metals using two different x-ray methods: Particle Induced X-Ray Emission and Scanning Electron Microscopy/ Energy Dispersive Spectroscopy. Fifteen metals were identified in various tattoo inks by these rapid x-ray methods, including chromium, manganese, nickel, copper, barium, and lead. Conclusions can be drawn about the prevalence of metals in some pigment colors and from some brands.展开更多
To reduce the impact of the novel SARS-CoV-2 virus, popularly known as the Coronavirus, many public health-related rules have been established around the world. Along with social distancing and lockdowns, most countri...To reduce the impact of the novel SARS-CoV-2 virus, popularly known as the Coronavirus, many public health-related rules have been established around the world. Along with social distancing and lockdowns, most countries have mandatory wearing of face masks in public areas to limit the spread of the virus during the COVID-19 pandemic. However, because people are free to choose any method to make their masks, some are being fabricated from materials that can be toxic to the environment and human health. This paper discusses how inks and dyes used in face masks are causing major environmental degradation and health issues in industry workers and the general mask-wearing public. The goal fixed for the present study is to raise the alarm with authorities and decision-makers regarding the toxic nature of some colors (dyes and inks) and fabrics in the masks being worn every day.展开更多
Precursor (Metal-organic decomposition (MOD)) inks are used to fabricate 2D and 3D printed conductive structures directly onto a substrate. By formulating a nanoalloy structure containing multiple metals, the opportun...Precursor (Metal-organic decomposition (MOD)) inks are used to fabricate 2D and 3D printed conductive structures directly onto a substrate. By formulating a nanoalloy structure containing multiple metals, the opportunity to modify chemical and physical properties exists. In this paper, a copper-nickel bimetallic nanoalloy film was fabricated by mixing copper and nickel precursor inks and sintering them in vacuum. The individual elemental inks were formulated and characterized using SEM, EDS, and XRD. During thermal processing, elemental copper forms first and is followed by the formation of bimetallic copper-nickel alloy. The encapsulation of the underlying copper by the nickel-rich alloy provides excellent oxidation resistance. No change in film resistance was observed after the film was exposed to an oxygen plasma. Nanoalloy films printed using reactive metallic inks have a variety of important applications involving local control of alloy composition. Examples include facile formation of layered nanostructures, and electrical conductivity with oxidative stability.展开更多
This work describes the application of a detailed set of TXRF evaluations to the elemental content of assorted tattoo inks, on the market of the city of Concepcion, Chile. We applied TXRF as a screening method for det...This work describes the application of a detailed set of TXRF evaluations to the elemental content of assorted tattoo inks, on the market of the city of Concepcion, Chile. We applied TXRF as a screening method for determining the composition in 3 sets of tattoo inks, in order to establish, from an inorganic point of view, the composition and purity of the samples, evaluating their elemental innocuousness. The analyzed 48 products were freely acquired from on line suppliers. All of them were analyzed by external standard quantification, but in order to inter-compare the results, a 15% of the samples were acidly digested and then quantified by the internal standard method. In the samples we determined: 1) their inorganic quantitative composition and, 2) the possible presence of elements which are potential health hazards. In this study few anomalies were found: 1) The high presence Ti of and W in few samples, 2) Arsenic was found in four of them, and 3) A trace detection of a rare earth element in a particular product. The products studied are almost freely imported from a world open marked, so the questions about their innocuousness could affect not only to the Chilean society.展开更多
ZTE Corporation has signed strategic telecommunications software agreement with two leading providers in Europe and Latin America to optimize its offerings for target customers in
As a natural organic polymer,xanthan gum(XG)can alleviate the plastic deformation of gel ink under strong stress and realize the reasonable regulation of the rheological properties of gel ink.However,as the double-hel...As a natural organic polymer,xanthan gum(XG)can alleviate the plastic deformation of gel ink under strong stress and realize the reasonable regulation of the rheological properties of gel ink.However,as the double-helix structure connected by hydrogen bonds cannot resist the mechanical environment of strong stress,XG shows poor shear resistance.In this study,a polymer gel with interpenetrating polymer network structure was prepared by esterifying XG,taking polystyrene maleic anhydride(SMA)as the modifier.In addition to retaining the excellent rheological properties of XG,the generated polymer gel also exhibited high shear resistance.The optimal addition amount of the esterification reaction modifier was determined as mXG:mSMA=5:3 according to the gel ink standard.With this amount,the viscosity of the modified xanthan gum(SXG)gel increased to 1578.8 mPa·s and 100.7 mPa·s at shear rates of 4 s1 and 383 s1,respectively,and the shear resistance increased more than 2 times compared to the unmodified one.It is because of the ester bond formed by esterification that the reaction strengthens the interaction between molecular segments,enabling the new gel to resist to strong mechanical stress.The new polymer gel studied in this paper and the proposed mechanism of action provide new insights for the development of high-end gel ink and also provide theoretical support for the study of rheological properties of non-Newtonian fluids.展开更多
Achieving flexible electronics with comfort and durability comparable to traditional textiles is one of the ultimate pursuits of smart wearables.Ink printing is desirable for e-textile development using a simple and i...Achieving flexible electronics with comfort and durability comparable to traditional textiles is one of the ultimate pursuits of smart wearables.Ink printing is desirable for e-textile development using a simple and inexpensive process.However,fabricating high-performance atop textiles with good dispersity,stability,biocompatibility,and wearability for high-resolution,large-scale manufacturing,and practical applications has remained challenging.Here,waterbased multi-walled carbon nanotubes(MWCNTs)-decorated liquid metal(LM)inks are proposed with carbonaceous gallium–indium micro-nanostructure.With the assistance of biopolymers,the sodium alginate-encapsulated LM droplets contain high carboxyl groups which non-covalently crosslink with silk sericin-mediated MWCNTs.E-textile can be prepared subsequently via printing technique and natural waterproof triboelectric coating,enabling good flexibility,hydrophilicity,breathability,wearability,biocompatibility,conductivity,stability,and excellent versatility,without any artificial chemicals.The obtained e-textile can be used in various applications with designable patterns and circuits.Multi-sensing applications of recognizing complex human motions,breathing,phonation,and pressure distribution are demonstrated with repeatable and reliable signals.Self-powered and energy-harvesting capabilities are also presented by driving electronic devices and lighting LEDs.As proof of concept,this work provides new opportunities in a scalable and sustainable way to develop novel wearable electronics and smart clothing for future commercial applications.展开更多
The effect of five dihydric alcohols on the fixation rate and K/S value of reactive dyes on cotton fabrics was investigated.Results show that the more primary hydroxyl groups are contained in the isomeric dihydric alc...The effect of five dihydric alcohols on the fixation rate and K/S value of reactive dyes on cotton fabrics was investigated.Results show that the more primary hydroxyl groups are contained in the isomeric dihydric alcohols,the greater activity of reacting with the reactive dye.Longer carbon chain also increases the reactivity of dihydric alcohols with reactive dyes.This study provides a theoretical basis for the selection of suitable dihydric alcohols in preparation reactive dye inkjet printing ink.展开更多
In this work,a PEDOT:PSS/Sn:α-Ga_(2)O_(3) hybrid heterojunction diode(HJD)photodetector was fabricated by spin-coat-ing highly conductive PEDOT:PSS aqueous solution on the mist chemical vapor deposition(Mist-CVD)grow...In this work,a PEDOT:PSS/Sn:α-Ga_(2)O_(3) hybrid heterojunction diode(HJD)photodetector was fabricated by spin-coat-ing highly conductive PEDOT:PSS aqueous solution on the mist chemical vapor deposition(Mist-CVD)grown Sn:α-Ga_(2)O_(3) film.This approach provides a facile and low-cost p-PEDOT:PSS/n-Sn:α-Ga_(2)O_(3) spin-coating method that facilitates self-powering per-formance through p-n junction formation.A typical type-Ⅰheterojunction is formed at the interface of Sn:α-Ga_(2)O_(3) film and PEDOT:PSS,and contributes to a significant photovoltaic effect with an open-circuit voltage(Voc)of 0.4 V under the 254 nm ultra-violet(UV)light.When operating in self-powered mode,the HJD exhibits excellent photo-response performance including an outstanding photo-current of 10.9 nA,a rapid rise/decay time of 0.38/0.28 s,and a large on/off ratio of 91.2.Additionally,the HJD also possesses excellent photo-detection performance with a high responsivity of 5.61 mA/W and a good detectivity of 1.15×1011 Jones at 0 V bias under 254 nm UV light illumination.Overall,this work may explore the potential range of self-pow-ered and high-performance UV photodetectors.展开更多
基金This work was supported by Science-technology Support Foundation of Guizhou Province of China(Nos.[2019]2325 and [2020]1Y125)the Growth Project of Young Scientific and Technological Talents in Colleges and Universities of Guizhou Province(No.[2019]184)+1 种基金Yunnan Fundamental Research Key Projects(No.2019FA012)National Natural Science Foundation of China(Nos.31870546 and 31800481).
文摘Based on the ESI-MS and ^(13)C-NMR analysis of the forms of glyoxal in acidic and alkaline solutions,the soy-based adhesive cross-linked by glyoxal was prepared in this work.The results showed that glyoxal existed in water in different forms at different pH levels.Under alkaline conditions,glyoxal transformed to glycolate through the intramolecular disproportionation reaction.Under acidic conditions,although some of glyoxal transformed to glycolate as what happened under alkaline conditions,most of glyoxal molecules existed in the form of fiveor six-membered cyclic ether structure.No ethylene tetraol or free aldehyde group was actually detected under these conditions.Although glyoxal reacted with soy protein under both acidic and alkaline conditions,alkaline conditions were more favorable for the improvement of mechanical performance and water resistance of soybased adhesives than acid conditions.
基金Project(2018GK4015)supported by the Hunan Provincial Strategic Emerging Industry Project,China
文摘Finer nanoplates of silver are prepared by self-assembly on the surface of graphene,and the low-temperature sintered high conductivity ink containing the silver nanoplates is prepared.Most importantly,graphene is added to the solution before the chemical reduction reaction occurs.Firstly,it is found that silver nanoplates have self-assembly phenomenon on the surface of graphene.Secondly,the Ag nano hexagonal platelets(AgNHPs)with small particle sizes(10 nm),narrow distribution and good dispersion are prepared.Especially,smaller sizes(10 nm)and narrower particle size distribution of AgNHPs particles can be easily controlled by using this process.Finally,the conductivity of the ink is excellent.For example,when the printed patterns were sintering at 150℃,the resistivity of the ink(GE:0.15 g/L)reached the minimum value of 2.2×10^-6 cm.And the resistivity value was 3.7×10^-6Ωcm,when it was sintered at 100℃ for 30 min.The conductive ink prepared can be used for the field of printing electronics as ink-jet printing ink.
基金The authors are grateful to the financial support of the National Natural Science Foundation of China(32071702)Beijing Forestry University Outstanding Young Talent Cultivation Project(2019JQ03004).
文摘Soy protein-based composite film is a potential replacement for petroleum-based film with multipurpose applica-tions and cleaner production.It is difficult to improve both the tensile strength and toughness of a protein-based film without sacrificing its elongation.In this study,inspired by the hierarchical structure of nacre,a facile yet delicate strategy was developed to fabricate a novel bio-based film with excellent toughness and high strength.Triglycidylamine(TGA)crosslinked soy protein(SPI)as hard phase and thermoplastic polyurethane elastomer(TPU)as soft phase comprise an alternative lay-up hierarchical structure.The interface of these two phases is enhanced using triglycidylamine(TGA)surface-modified TPU(MTPU).The tensile strength of SPI/MTPU/TGA films increases by 392%to 7.78 MPa and their toughness increases by 391%to 8.50 MJ/m^(3) compared to soy protein/glycerol film.The proposed hierarchical structure can also be extended to other high-performance materials and polymers.
文摘Protein baitsprays were produced from many different sources for the controlling fruit flies in the integrated pest management program around the world.Here,fruit fly baits were formulated based on cost-effective bait mixtures such as local jaggery,brewers spent grain(BSG),apple cider vinegar,wheat bran powder and local red wine with the fresh enzyme from papaya and pineapple.Fruit fly Baits were prepared by mixing the small amount of local detergent as insecticide.Our results indicated that the best efficient fruit fly bait for area wide integrated pest management(AW-IPM)is the BSG-based bait whereas the second efficient bait is local red wine-based bait.The highest fruit fly per trap per day(FTD)value by BSG-based bait traps was discovered.The highest female captured percentage is BSG-based bait with papaya solution.The field analysis of one week and one month old protein-based bait showed that FTD values decreased slightly while only one month old wheat bran-based bait dropped to the base.The BSG-based baits analysis is effective not only female fruit flies but also cockroaches male in Myanmar’s tropical region.Thus our results reveal that the efficient protein-based bait is the fresh BSG-based bait with papaya solution.
基金Project(106151)supported by the Major Program of the Ministry of Education of ChinaProject(59842001)supported by the National Natural Science Foundation of China
文摘Ink-jet printing of ceramic thick films is one of low cost on-site ceramic pattern fabrication methods.It is necessary to investigate the rheological behaviour of ceramic inks and drying behaviour of droplets.Two kinds of BaTiO3 ceramic inks were prepared by mechanical mixing and sol-gel methods,respectively.The effect of preparation parameters,such as quantity of polyacrylic acid(PAA)and solid content,on physicochemical and rheologic properties of the ceramic inks was investigated.The results show that they satisfy the requirements of continuous ink-jet printing.The appearances of printed dots and single printed layers were observed by SEM.The SEM images indicate that dots printed with mixing method ink are in ring shape,and dots printed with sol-gel method ink are in pancake shape,so the printed layer surface with the latter ink is smoother.The causes of these phenomena were discussed.
文摘In this work, we study the stability of a class of materials obtained by printing a textile with conductive inks using a method called screen printing. Under the action of a certain external factors, the printed circuit suffers deterioration and the conductivity decreases considerably. In this work, we propose to model the overall damage of the textile sheet in terms of the partial damages of the conductive lines. We also apply this approach to evaluate the damage of a system being made of transmission lines printed into nonwoven substrates using different conductive inks.
文摘While the practice of tattooing has existed for thousands of years, it has recently begun growing in popularity in the US. With the increasing prevalence of tattoos, the methods and inks involved in the tattooing process have also developed. Tattoos now use many brightly colored inks, often made using metal-based pigments. There is concern that chemicals may be present in tattoo inks in concentrations that may lead to human health concerns either during application or removal of tattoos. Since exposure to metals has been linked to tremors, liver damage, memory loss, cognitive loss, and even death, there is concern about the prevalence of metals in tattoo inks in general. To this end, a survey of 226 commercial tattoo inks was performed and each ink was analyzed for the presence of heavy metals using two different x-ray methods: Particle Induced X-Ray Emission and Scanning Electron Microscopy/ Energy Dispersive Spectroscopy. Fifteen metals were identified in various tattoo inks by these rapid x-ray methods, including chromium, manganese, nickel, copper, barium, and lead. Conclusions can be drawn about the prevalence of metals in some pigment colors and from some brands.
文摘To reduce the impact of the novel SARS-CoV-2 virus, popularly known as the Coronavirus, many public health-related rules have been established around the world. Along with social distancing and lockdowns, most countries have mandatory wearing of face masks in public areas to limit the spread of the virus during the COVID-19 pandemic. However, because people are free to choose any method to make their masks, some are being fabricated from materials that can be toxic to the environment and human health. This paper discusses how inks and dyes used in face masks are causing major environmental degradation and health issues in industry workers and the general mask-wearing public. The goal fixed for the present study is to raise the alarm with authorities and decision-makers regarding the toxic nature of some colors (dyes and inks) and fabrics in the masks being worn every day.
文摘Precursor (Metal-organic decomposition (MOD)) inks are used to fabricate 2D and 3D printed conductive structures directly onto a substrate. By formulating a nanoalloy structure containing multiple metals, the opportunity to modify chemical and physical properties exists. In this paper, a copper-nickel bimetallic nanoalloy film was fabricated by mixing copper and nickel precursor inks and sintering them in vacuum. The individual elemental inks were formulated and characterized using SEM, EDS, and XRD. During thermal processing, elemental copper forms first and is followed by the formation of bimetallic copper-nickel alloy. The encapsulation of the underlying copper by the nickel-rich alloy provides excellent oxidation resistance. No change in film resistance was observed after the film was exposed to an oxygen plasma. Nanoalloy films printed using reactive metallic inks have a variety of important applications involving local control of alloy composition. Examples include facile formation of layered nanostructures, and electrical conductivity with oxidative stability.
文摘This work describes the application of a detailed set of TXRF evaluations to the elemental content of assorted tattoo inks, on the market of the city of Concepcion, Chile. We applied TXRF as a screening method for determining the composition in 3 sets of tattoo inks, in order to establish, from an inorganic point of view, the composition and purity of the samples, evaluating their elemental innocuousness. The analyzed 48 products were freely acquired from on line suppliers. All of them were analyzed by external standard quantification, but in order to inter-compare the results, a 15% of the samples were acidly digested and then quantified by the internal standard method. In the samples we determined: 1) their inorganic quantitative composition and, 2) the possible presence of elements which are potential health hazards. In this study few anomalies were found: 1) The high presence Ti of and W in few samples, 2) Arsenic was found in four of them, and 3) A trace detection of a rare earth element in a particular product. The products studied are almost freely imported from a world open marked, so the questions about their innocuousness could affect not only to the Chilean society.
文摘ZTE Corporation has signed strategic telecommunications software agreement with two leading providers in Europe and Latin America to optimize its offerings for target customers in
基金supported by Shanxi Provincial Science and Technology Achievement Transformation Guidance Special Program of China(202104021301052)Shanxi Provincial Patent Transformation Special Plan Project(202202054,202306013).
文摘As a natural organic polymer,xanthan gum(XG)can alleviate the plastic deformation of gel ink under strong stress and realize the reasonable regulation of the rheological properties of gel ink.However,as the double-helix structure connected by hydrogen bonds cannot resist the mechanical environment of strong stress,XG shows poor shear resistance.In this study,a polymer gel with interpenetrating polymer network structure was prepared by esterifying XG,taking polystyrene maleic anhydride(SMA)as the modifier.In addition to retaining the excellent rheological properties of XG,the generated polymer gel also exhibited high shear resistance.The optimal addition amount of the esterification reaction modifier was determined as mXG:mSMA=5:3 according to the gel ink standard.With this amount,the viscosity of the modified xanthan gum(SXG)gel increased to 1578.8 mPa·s and 100.7 mPa·s at shear rates of 4 s1 and 383 s1,respectively,and the shear resistance increased more than 2 times compared to the unmodified one.It is because of the ester bond formed by esterification that the reaction strengthens the interaction between molecular segments,enabling the new gel to resist to strong mechanical stress.The new polymer gel studied in this paper and the proposed mechanism of action provide new insights for the development of high-end gel ink and also provide theoretical support for the study of rheological properties of non-Newtonian fluids.
基金funded by The Hong Kong Polytechnic University(Project No.1-WZ1Y,1-YXAK,1-W21C).
文摘Achieving flexible electronics with comfort and durability comparable to traditional textiles is one of the ultimate pursuits of smart wearables.Ink printing is desirable for e-textile development using a simple and inexpensive process.However,fabricating high-performance atop textiles with good dispersity,stability,biocompatibility,and wearability for high-resolution,large-scale manufacturing,and practical applications has remained challenging.Here,waterbased multi-walled carbon nanotubes(MWCNTs)-decorated liquid metal(LM)inks are proposed with carbonaceous gallium–indium micro-nanostructure.With the assistance of biopolymers,the sodium alginate-encapsulated LM droplets contain high carboxyl groups which non-covalently crosslink with silk sericin-mediated MWCNTs.E-textile can be prepared subsequently via printing technique and natural waterproof triboelectric coating,enabling good flexibility,hydrophilicity,breathability,wearability,biocompatibility,conductivity,stability,and excellent versatility,without any artificial chemicals.The obtained e-textile can be used in various applications with designable patterns and circuits.Multi-sensing applications of recognizing complex human motions,breathing,phonation,and pressure distribution are demonstrated with repeatable and reliable signals.Self-powered and energy-harvesting capabilities are also presented by driving electronic devices and lighting LEDs.As proof of concept,this work provides new opportunities in a scalable and sustainable way to develop novel wearable electronics and smart clothing for future commercial applications.
文摘The effect of five dihydric alcohols on the fixation rate and K/S value of reactive dyes on cotton fabrics was investigated.Results show that the more primary hydroxyl groups are contained in the isomeric dihydric alcohols,the greater activity of reacting with the reactive dye.Longer carbon chain also increases the reactivity of dihydric alcohols with reactive dyes.This study provides a theoretical basis for the selection of suitable dihydric alcohols in preparation reactive dye inkjet printing ink.
基金supported by the National Key Research and Development Program of China (Grant No.2022YFB3605404)the Young Scientists Fund of the National Natural Science Foundation of China (Grant Nos.62204125,62305171,62204126,and 62304113)+3 种基金the Joints Fund of the National Natural Science Foundation of China (Grant No.U23A20349)the Natural Science Foundation of Jiangsu Province (Grant No.BK20230361)the Natural Science Research Startup Foundation of Recuring Talents of Nanjing University of Posts and Telecommunications (Grant No.XK1060921119)the Jiangsu Provincial Team of Innovation and Entrepreneurship (Grant No.JSSCTD202351).
文摘In this work,a PEDOT:PSS/Sn:α-Ga_(2)O_(3) hybrid heterojunction diode(HJD)photodetector was fabricated by spin-coat-ing highly conductive PEDOT:PSS aqueous solution on the mist chemical vapor deposition(Mist-CVD)grown Sn:α-Ga_(2)O_(3) film.This approach provides a facile and low-cost p-PEDOT:PSS/n-Sn:α-Ga_(2)O_(3) spin-coating method that facilitates self-powering per-formance through p-n junction formation.A typical type-Ⅰheterojunction is formed at the interface of Sn:α-Ga_(2)O_(3) film and PEDOT:PSS,and contributes to a significant photovoltaic effect with an open-circuit voltage(Voc)of 0.4 V under the 254 nm ultra-violet(UV)light.When operating in self-powered mode,the HJD exhibits excellent photo-response performance including an outstanding photo-current of 10.9 nA,a rapid rise/decay time of 0.38/0.28 s,and a large on/off ratio of 91.2.Additionally,the HJD also possesses excellent photo-detection performance with a high responsivity of 5.61 mA/W and a good detectivity of 1.15×1011 Jones at 0 V bias under 254 nm UV light illumination.Overall,this work may explore the potential range of self-pow-ered and high-performance UV photodetectors.
