Adjusting the properties of the photon generated via an optical parametric oscillator by using a pulse pumped laser

The cavity-enhanced spontaneous parametric down-conversion far below threshold can be used to generate a narrow-band photon pair efficiently. Previous experiments on the cavity-enhanced spontaneous parametric down- conversion almost always utilize continuous wave pump light, but the pulse pumped case is rarely reported. One disadvantage of the continuous wave case is that the photon pair is produced randomly within the coherence time of the pump, which limits its application in the quantum information realm. However, a pulse pump can help to solve this problem. In this paper, we theoretically analyze pulse pumped cavity-enhanced spontaneous parametric down- conversion in detail and show how the pump pulse affects the multi-photon interference visibility, two-photon waveform, joint spectrum and spectral brightness.

Generation of 54 Fs Laser Pulses from a Diode Pumped Kerr-Lens Mode-Locked Yb:LSO Laser

A diode pumped Kerr-lens mode-locked femtosecond Yb：LSO laser is experimentally demonstrated for the first time. The 54fs laser pulses at central wavelength of 1052nm with a bandwidth of 22.5nm are obtained at the repetition rate of 113 MHz. To the best of our knowledge, this is the shortest pulse duration ever produced from the Yb-doped orthosilicates lasers family.

Pump pulse characteristics of quasi-continuous-wave diode-side-pumped Nd:YAG laser

The influence of pumping laser pulse on the property of quasi-continuous-wave(QCW)diode-side-pumped Nd:YAG laser is investigated theoretically and experimentally.Under remaining a fixed duty cycle,the average output power increases,and the corresponding thermal focal length shorten with the increase of the pump pulse duration,which attributes to the decrease of the ratio of pulse buildup time to the pulse duration.At a pump power of 146 W,the laser output power changes from 65.1 W to 81.2 W when the pulse duration is adjusted from 150μs to 1000μs,confirming a significant enhancement of 24.7%.A laser rate equation model incorporating the amplified spontaneous emission is also utilized and numerically solved,and the simulated results agree well with the experimental data.

FLASHLAMP- PUMPED PULSED DYE LASER IN TREATMENT OF PORT- WINE STAINS

To assess the effectiveness of the flashlamp- pumped pulsed dye laser (Photogeneca V, Synosure Corp, Boston, United States) in the treatment of port- wine stains. Methods. One hundred and ninety- four consecutive patients with port- wine stains were treated with a flashlamp- pumped pulsed dye laser in Peking Union Medical College Hospital from January 1998 to August 1999. Results. Of 194 patients who completed treatment, 56.2％ had more than 60％ fading of the lesion and only 6.7％ had less than 20％ fading. An average of 3.6 treatments were needed to achieve more than 60％ fading. The response was better in children than in adults, although the difference was not significant. Pigmentary change (usually transient) occurred in 3.1％ of patients. Conclusions. This study confirms the efficacy of the flashlamp- pumped pulsed dye laser in the treatment of port- wine stains in children and adults.

Femtosecond Stimulated Raman Line Shapes:Dependence on Resonance Conditions of Pump and Probe Pulses

Resonance enhancement has been increasingly employed in the emergent felntosecond stimu- lated Raman spectroscopy （FSRS） to selectively monitor molecular structure and dynamics with improved spectral and temporal resolutions and signal-to-noise ratios. Such joint eflforts by the technique- and application-oriented scientists and engineers have laid the foundation for exploiting the tunable FSRS methodology to investigate a great variety of photosensitive systems and elucidate the underlying functional mechanisms on molecular time scales. Dur- ing spectral analysis, peak line shapes remain a major concern with an intricate dependence on resonance conditions. Here, we present a comprehensive study of line shapes by tuning the Rarnan pump wavelength from red to blue side of the ground-state absorption band of the fluorescent dye rhodarnine 6G in solution. Distinct line shape patterns in Stokes and anti-Stokes FSRS as well as from the low to high-frequency modes highlight the competition between multiple third-order and higher-order nonlinear pathways, governed by difl^rent res- onance conditions achieved by Raman pump and probe pulses. In particular, the resonance condition of probe wavelength is revealed to play an important role in generating circular line shape changes through oppositely phased dispersion via hot luminescence （HL） pathways. Meanwhile, on-resonance conditions of the Rarnan pump could promote excited-state vibrational modes which are broadened and red-shifted from the coincident ground-state vibrational modes, posing challenges for spectral analysis. Certain strategies in tuning the Raman pump and probe to characteristic regions across an electronic transition band are discussed to improve the FSRS usability and versatility as a powerful structural dynamics toolset to advance chemical, physical, materials, and biological sciences.

Control of reaction channels of CsI molecule by ultra-short laser pulse

The influence of the ultra-short pulse wavelength on the populations in the three electronic states of CsI molecule is investigated using the time-dependent wave packet method. The calculated results show that the populations in the two excited states approach to the maxima at the wavelengths of 369 nm and 297 nm, respectively. The photodissociation reaction channels of the CsI molecule can be chosen by controlling the pump pulse wavelength.

Supercontinuum generation with 15-fs pump pulses in microstructured fiber with combination core and random cladding

We demonstrate the generation of supercontinuum (SC) of over 1350 nm by injecting 790-nm, 15-fs, 74-MHz optical pulses into a 183-mm-long microstructured fiber with combination core and random cladding. The maximum total power of SC is 73 mW with 290-mW pump power from 40x microscope objective. The wavelength and power ranging in SC as well as the polarization states and waveguide modes of the visible light can be tuned by adjusting the input end of MF.In particular, white light has been observed. To our knowledge, this is the first report of tunable properties in SC generation process using microstructured fiber with combination core and random cladding.

High-peak-power passively Q-switched 1.3 μm Nd:YAG/V^(3+):YAG laser pumped by a pulsed laser diode

We demonstrate a high-pulse-energy, short-pulse-width passively Q-switched（PQS） Nd：YAG∕V3t：YAG laser at 1.3 μm, which is end-pumped by a pulsed laser diode. During the PQS regime, a maximum total output pulse energy of 3.3 m J is obtained under an absorbed pump pulse energy of 21.9 m J. Up to 400 μJ single-pulse energy is realized with the shortest pulse width of 6.16 ns and a pulse repetition frequency of 34.1 k Hz,corresponding to a peak power of 64.9 k W. The high-energy laser pulse is operated in the dual wavelengths of 1319 and 1338 nm, which is a potential laser source for THz generation.

Recent improvements on the pulsed optically pumped rubidium clock at SIOM

We report the recent progress of our pulsed optically pumped（POP） vapor cell rubidium clock with dispersive detection.A new compact physics package is made.A rubidium cell with a high precision buffer gases mixing ratio is obtained,and the temperature controlling system is renovated to reduce fractional frequency sensitivity to temperature variation.The resolution of the servo control voltage is also optimized.With these improvements,a clock frequency stability of 3.53×10-13 at 1s is obtained,and a fractional frequency stability of 4.91×10-15 is achieved at an average time of τ=2000 s.

Octave-spanning visible supercontinuum generation from an aluminum nitride single crystal pumped by a 355 nm nanosecond pulse

Supercontinuum generation（SC） of more than one octave spectrum spanning covering from 400 nm to 820 nm was achieved by pumping a piece of aluminum nitride（AIN） single crystal using a nanosecond 355 nm ultraviolet laser. The AlN with a thickness of ~0.8 mm was grown by an optimized physical vapor transport technique and polished with solidification technology. Compared to previously reported ones, the achieved visible SC exhibited the broadest spectrum spanning from bulk materials pumped by a nanosecond pulse laser. The visible supercontinuum in Al N presents new opportunities for bulk material-based white light SC and may find more potential applications beyond typical applications in integrated semiconductive photoelectronic devices.