Studies on a Cationically Modified Quaternary Ammonium Salt of Lignin

A new quaternary ammonium salt monomer was synthesized and a quaternary amination of lignin（ noted as QL）, with the monomer was carried out by grafting copolymerization. The products were characterized by Fourier Transform Infrared spectroscopy（ FTIR）. The experimental results indicate that the yield of the monomer was 99.06%, and the conversion of the monomer and the grafting yield of QL were 93.69% and 185.78%, respectively. The feasibility of QL as the flocculant to be applied in color removal of five artificial dyes, erioehrome black T（dye A）, gongo red（dye B ）, direct fast black G （dye C ）, cuprofix blue green B （dye D ）, and acid black ATT （dye E ） was examined. Results show that OL exhihits the favorable flocculation nerformance and high stability.

Effect of quaternary ammonium salts on flotation behavior of aluminosilicate minerals

The electrokinetic properties and flotation of diaspore, kaolinite, pyrophyllite and illite with quaternary ammonium salts collectors were studied. The results of flotation tests show that the collecting ability of quaternary ammonium salts for the four minerals is in the order（from strong to weak） ofoctadecyl dimethyl benzyl ammonium chloride（ODBA）, cetyl trimethyl ammonium bromide（CTAB）, dodecyl trimethyl ammonium chloride（DTAC）. Under the condition of alkalescence, it is possible to separate the diaspore from the silicate minerals such as kaolinite, illite and pyrophyllite using quaternary ammonium salts as collector. Isoelectric points （IEP） of diaspore, kaolinite, pyrophyllite and illite are pH=6.0, 3.4, 2.3 and 3.2, respectively. Quaternary ammonium salts can change ζ-potential of the aluminosilicate minerals obviously. The flotation mechanisms were explained by ζ-potential and Fourier transform infrared spectrum （FT-IR） measurements. The results demonstrate that only electrostatic interaction takes place between aluminosilicate minerals （diaspore, kaolinite, pyrophyllite and illite） and quaternary ammonium salts.

Superoxide Anion Radical Scavenging Ability of Quaternary Ammonium Salt of Chitosan

A series of N-alkyl or N-aryl chitosan quaternary ammonium salt were prepared using 96% deacetylated chitosan. Their scavenging activities against superoxide anion radical were investigated by chemiluminescence. The IC50 values of these compounds range from 280 to 880 μg/mL, which should be attributed to their different substitutes.

Dimethyl carbonate synthesis via transesterification catalyzed by quaternary ammonium salt functionalized chitosan

A quaternary ammonium salt covalently linked to chitosan was first used as a catalyst for dimethyl carbonate （DMC） synthesis by the transesterification of propylene carbonate （PC） with methanol. The effects of various reaction variables like reaction time, temperature and pressure on the catalytic performance were also investigated. 54% DMC yield and 71% PC conversion were obtained under the optimal reaction conditions. Notably, the catalyst was able to be reused with retention of high catalytic activity and selectivity. Consequently, the process presented here has great potential for industrial application due to its advantages such as stability, easy preparation from renewable biopolymer, and simple separation from products.

Flotation and adsorption of quaternary ammonium salts collectors on kaolinite of different particle size

The flotation behaviors of decyltrimethylammonium (103C), dodecyltrimethylammonium chloride (DTAC), tetradecyltrimethylammonium chloride (TTAC) and cetyltrimethylammonium chloride (CTAC) on kaolinite of different particle size fraction were studied. The adsorbed amount and adsorption isotherms of collectors on kaolinite were determined for painstaking investigation into the adsorption of quaternary amines at kaolinite-water interface by ultraviolet spectrophotometer methods. The flotation results show that the flotation recovery of kaolinite of different particle fraction increases with an increase in pH when 103C, DTAC, TTAC and CTAC are used as collectors. As the concentration of collectors increases, the flotation recovery increases. Particle size of kaolinite has a strong effect on flotation. The flotation recovery of fine kaolinite decreases with the carbon chain of quaternary ammonium salts collectors increasing, while coarse kaolinite is on the contrary. The adsorbed amount tests and adsorption isotherms show that adsorbed amount increases when the particle size of kaolinite increases or when the carbon chain length of quaternary ammonium salts increases. Within the range of flotation collector concentration, the longer the hydrocarbon chain, the more probable to be absolutely adsorbed by fine kaolinite particles and then the lower the collector concentration in the bulk, which leds to lower flotation recovery.

Preparation of spiro-type quaternary ammonium salt via economical and efficient synthetic route as electrolyte for electric double-layer capacitor

A spiro-type quaternary ammonium salt, spiro-(1,1′)-bipyrrolidinium tetrafluoroborate(SBP-BF4) was successfully prepared by an economical and efficient three-step process comprising the cyclization reaction of 1,4-dibromobutane and pyrrolidine, and subsequent ion exchange pathway with KOH followed by neutralization reaction via HBF4 in the system of ethanol solution. 1H NMR, 13 C NMR, FI-IR and XPS analyses showed the structure of SBP-BF4. The as-obtained SBP-BF4 was dissolved in AN and used as the electrolyte for supercapacitor. Electrochemical measurements demonstrate that, compared with commercial electrolyte TEMA-BF4/AN, SBP-BF4/AN exhibits high ionic conductivity, lower resistance and improved cycling performance, which is due to its smaller ion size and stable symmetry structure.

Synthesis of Chitosan Quaternary Ammonium Salts

A series of N-alkyl or N-aryl chitosan quaternary ammonium salts were prepared via Schiffs base intermediates. Quaternization of N-substituted chitosan derivatives was carried out using methyl iodide to produce water-soluble cationic chitosan quaternary ammonium salt. The products were characterized by IR, (HNMR)-H-1 and elemental analysis. The degree of substitution of chitosan quaternary ammonium salt was calculated by elemental analysis.

Azobenzene quaternary ammonium salt for photo-controlled and reusable disinfection without drug resistance

The abuse of antibiotics causes severe bacterial resistance, and the shortage of antibiotics has created a global public health crisis. This situation has prompted people to develop new antibacterial agents independent of traditional antibiotics. Here, we created a series of photosensitive azobenzene-quaternary ammonium salt smart antibacterial agents by connecting azobenzene with amines with different chain lengths to improve the antibacterial selectivity of quaternary ammonium salt(QAS) and prevent the accumulation of active QAS in the environment. After trans-cis isomerization, the solubility of the title compound(compound 4) increased and the antibacterial property enhanced. The experimental results suggested that the antibacterial effect of compound 4 was significantly enhanced after 365 nm light irradiation, and it had photosensitive intelligent antibacterial activity and could be reused. Notably, we did not obtain any mutants of Staphylococcus aureus or Escherichia coli resistant to compound 4. In general,compound 4 has the advantages of high yield, photo-controllable antibacterial properties, reusability, and does not induce bacterial resistance. This photosensitive antibacterial compound provides a new idea for the construction of intelligent disinfectants and is expected to be a candidate for disinfectants in public facilities and medical architecture.

Facile fabrication of superior antibacterial cotton fabric based on ZnO nanoparticles/quaternary ammonium salts hybrid composites and mechanism study

In the research for the safe and efficiently antibacterial cotton fabrics to minimize risk for human health,an organic–inorganic hybrid material of ZnO nanoparticles(NPs)and quaternary ammonium salt(QAS)was employed to modify cotton fabrics by a dipping–padding–drying method.The synergistic effects of ZnO NPs and QAS on the structure and antibacterial properties of cotton fabrics were studied in detail.Results displayed that the QAS and ZnO NPs were immobilized firmly in cotton fabric by the formation of chemical covalent bonds and silica gel structure.ZnO/QAS/cotton had a good inhibitory effect on the growth of E.coli and S.aureus,with superior antibacterial efficiency of>99.99%.ZnO/QAS/cotton preserved good mechanical property,water absorbability,and limpness.We also provided a detailed analysis of antibacterial mechanism for the hybrid materials.The contact mechanism and the Zn2+release were considered as the main mechanisms for the ZnO/QAS/cotton,while the reactive oxygen species(ROS)generation only had a little contribution to the antibacterial activity.In short,the excellent integrated properties endowed the hybrid cotton fabrics as potential application in many fields,like healthcare,food packaging.

Modified gelatin with quaternary ammonium salts containing epoxide groups

An EPDDMAC-GE polymer （hydrophilic molecule） has been synthesized based on epoxypropyl dodecyl dimethyl ammonium chloride （EPDDMAC） and gelatin. A DEEPSAC-GE polymer （hydrophobic molecule） has been synthesized based on diethyl-2,3-epoxypropyl-[3-methyldimethoxyl] silpropyl ammonium chloride （DEEPSAC） and gelatin. Compared with initial gelatin, the gelatin modified with quaternary ammonium salts containing epoxide groups exhibits stronger antibacterial activity.

Surface charge-convertible quaternary ammonium salt-based micelles for in vivo infection therapy

Quaternary ammonium salts(QASs) are excellent candidates for treating stubborn bacterial infections caused by biofilms due to their high sterilization efficiency and potential inhibition of the development of drug resistance.However,the inherent toxicity of QASs,including cytotoxicity,protein absorption and hemolysis,severely limits their applications in vivo.Herein,a charge-co nvertible quaternary ammonium salt-based micelle(QAS-SL@CM) was constructed by co-assembly of two amphiphiles with opposite charges and shell cross-linking strategy.The toxicity of the QAS-SL@CM could be greatly reduced towa rds human cells contrast to the corresponding QASs.By response to the acidic environment at infection sites,the surface charge of QAS-SL@CM could be immediately changed to positive and then target to negatively charged bacteria.Furthermo re,β-thiopropionate bonds on QAS-SL@CM could also be disintegrated under acid environment to release QASs to kill bacteria.Importantly,the QAS-SL@CM showed significant therapeutic effect in mice subcutaneous abscesses models without interference with normal cells.Therefore,a surface adaptive micelle constructed by charge-convertible strategy has been developed to ove rcome the cytotoxicity of QAS s,and could intelligently respond to the microenvironment of infected wound for in vivo infection therapy,which shows promising application in clinic.

Synthesis of chiral spirocyclo-quaternary ammonium salts from L-proline and their application as phase-transfer catalysts in asymmetric alkylation

A new series of chiral phase-transfer catalysts 7a-7h were designed and synthesized from L-proline with moderate to good yields.＇The catalytic activity of 7a-Th for the asymmetric alkylation of glycine Schiff bases was evaluated, and some interesting relationships between structure and catalytic activity were revealed.

Humidity Sensitive Properties of a Coplymer of Quaternary Ammonium Salt with Polyether-salt Complex

1 Results Humidity sensors have been widely used in meteorology, process controlling, agriculture and manufacturing. In recent year, more attention has been paid to resistive-type polymeric humidity sensors. Polyelectrolytes are the most usually used materials for their advantages of high sensitivity, fast response, easy preparation, low cost, etc[1,2]. In this paper quaternized and salt-doped copolymer of 2-(dimethylamino) ethylmethacrylate (DMAEMA) with poly(ethylene glycol) methyl ether methacrylate ...

Highly selective hydration reaction of a-pinene over H-mordenites pretreated with quaternary ammonium salts

The application of shape-selectivity of zeolite in petrochemistry has been an ac-tive research area since it was first proposed by Weisz and Frilette, and the tendencyto utilize the potential for specific, highly selective syntheses in the field of inter-mediates and fine chemicals has continued steadily in recent years. Nevertheless,

PREPARATION AND PHOTOSENSITIVITY OF WATER SOLUBLE PHENOLIC RESINS CONTAINING ACRYLOYL AND QUATERNARY AMMONIUM CHLORIDE GROUPS

New water soluble and photocrosslinkable prepolymers containing acrylate and quaternary ammonium salt groups were synthesized from epoxy phenolic resin via ring-opening reaction with acrylic acid and with aqueous solution of triethylamine hydrochloride successively. The second reaction needs no phase transfer catalyst to accelerate, since the product formed can act as a phase transfer catalyst. The prepolymer obtained contains both photocrosslinkable acrylate groups and hydrophilic quaternary ammonium salt groups. Optimum conditions for these reactions were studied. The photosensitivity of the prepolymer was also investigated. The effects of different photoinitiators, different crosslinkable diluent monomers and amine accelerator on the photosensitivity of the prepolymer were compared. The photoinitiator of hydrogen abstraction type is still effective without using amine or alcohol as accelerator, because the prepolymer contains a H beside the OH groups formed in the ring-opening reactions.

POLYMER-SUPPORTED SINGLE AND MIXED AMMONIUM AND PHOSPHONIUM SALTS AS CATALYSTS FOR PHASE-TRANSFER REACTIONS

In this study was to investigate, by phase-transfer catalysis, the activity of single and mixed ammonium and phosphonium salts grafted on a 揼el-type?styrene-7% divinylbenzene copolymer in the oxidation of benzyl alcohol with hydrogen peroxide. A wide variety of catalysts with different quaternary groups and different quaternary chain length substituents were examined. The activity of single 搊nium?salts increases as a consequence of the association of ammonium and phosphonium salts grafted on the same polymeric support. The activity of polymer-supported ammonium and phosphonium salts increases with the number of carbon atoms contained in the alkyl radicals of the onium and of the functionalization degree with phosphonium groups.

ANTIBACTERIAL ACTIVITY OF SINGLE AND MIXED AMMONIUM AND PHOSPHONIUM SALTS GRAFTED ON "GEL-TYPE" STYRENE-DIVINYLBENZENE COPOLYMERS

A systematic study on the synthesis and antibacterial activity of the quaternary "onium" salts grafted on an insoluble "gel-type" styrene-7% divinylbenzene copolymer by polymer-analogous reactions is showed. Antibacterial activity of quaternary ammonium and/or phosphonium salts grafted on polymer-supports has been studied against Staphylococcus aureus and Escherichia coli. A wide variety of "onium" salts bound to macromolecular supports with different quaternary groups and different quaternary chain length substituents were examined. The antibacterial activity of mixed "onium" salts increases as a consequence of the association of ammonium and phosphonium salts grafted on the same polymeric support.

Preparation and Antibacterial Activity of Copolymer of Methacryloxyethyldimethyl Dodecyl Ammonium Bromide/Acrylamide

Copolymers PMDAB-co-AA with excellent antibacterial activity were designed and prepared（MDAB/AA=methacryloxyethyldimethyl dodecyl ammonium bromide with acrylamide）.The chemical structures of the copolymers were characterized by Fourier transform infrared（FTIR）,1 H NMR,13 C NMR and chemical titration.The antimicrobial activities and kinetics of the copolymer against E.coli and S.aureus were examined by viable cell counting method.The compositions of the copolymers could be easily controlled by the feed molar ratio of MDAB to AA.Furthermore,the highest antibacterial activity was achieved when the molar fraction of MDAB was in a range of 5%―20%,and the killing rate reached 100% under the test conditions.In addition,the antibacterial activity of PMDAB-co-AA was maintained and stable without any loss after 15 times of repeated usage.It was proved that the PMDAB-co-AA samples targeted at cell membrane,and caused serious damage to cell integrity and inner membrane permeation.The surrounding conditions,such as pH and inorgainc salts concentrations（CaCl2 or NaCl）,also affected their antibacterial activities.

Preparation and application of cationized pulp fiber as a papermaking wet-end additive

Cationized pulp fibers （CPF） were prepared by the adsorption of a novel biodegradable cationic ester quaternary ammonium salt （31441） on bleached softwood kraft pulp fibers. The optimized conditions for the CPF preparation were： 4% of 31441 （based on oven-dry pulp）, 80℃ and 30 rain. The CPF was characterized by FT-IR, SEM and XPS. Experimental results showed that the CPF improved the retention of precipitated calcium carbonate （PCC） filler significantly. With 0.9% CPF （based on oven-dry pulp）, the retention of PCC increased from 57.53% to 72.21%. The physical properties of paper were also slightly improved. The tensile strength and burst strength of the paper with CPF were higher than those with CPAM. CPF addition had no effect on the stock drainage.

Study on Reducing Injection Pressure of Low Permeability Reservoirs Characterized by High Temperature and High Salinity

In view of the problems of high injection pressure and low water injection rate in water injection wells of low permeability reservoirs featuring high temperature and high salinity,two new surfactants were synthesized,including a quaternary ammonium surfactant and a betaine amphoteric surfactant.The composite surfactant system BYJ-1 was formed by mixing two kinds of surfactants.The minimum interfacial tension between BYJ-1 solution and the crude oil could reach 1.4×10^(-3) mN/m.The temperature resistance was up to 140℃,and the salt resistance could reach up to 120 g/L.For the low permeability core fully saturated with water phase,BYJ-1 could obviously reduce the starting pressure gradient of low permeability core.While for the core with residual oil,BYJ-1 could obviously reduce the injection pressure and improve the oil recovery.Moreover,the field test showed that BYJ-1 could effectively reduce the injection pressure of the water injection well,increase the injection volume,and increase the liquid production and oil production of the corresponding production well.