A Cu-Pd alloy catalyst with partial phase separation for the electrochemical CO_(2) reduction reaction

Cu catalysts can convert CO_(2) through an electrochemical reduction reaction into a variety of useful carbon-based products.However,this capability provides an obstacle to increasing the selectivity for a single product.Herein,we report a simple fabrication method for a Cu-Pd alloy catalyst for use in a membrane electrode assembly(MEA)-based CO_(2) electrolyzer for the electrochemical CO_(2) reduction reaction(ECRR)with high selectivity for CO production.When the composition of the Cu-Pd alloy catalyst was fabricated at 6:4,the selectivity for CO increased and the production of multi-carbon compounds and hydrogen is suppressed.Introducing a Cu-Pd alloy catalyst with 6:4 ratio as the cathode of the MEAbased CO_(2) electrolyzer showed a CO faradaic efficiency of 92.8%at 2.4 V_(cell).We assumed that these results contributed from the crystal planes on the surface of the Cu-Pd alloy.The phases of the Cu-Pd alloy catalyst were partially separated through annealing to fabricate a catalyst with high selectivity for CO at low voltage and C_(2)H_4 at high voltage.The results of CO-stripping testing confirmed that when Cu partially separates from the lattice of the Cu-Pd alloy,the desorption of~*CO is suppressed,suggesting that C-C coupling reaction is favored.

Highly mass activity electrocatalysts with ultralow Pt loading on carbon black for hydrogen evolution reaction

Pt-based nanocatalysts offer excellent prospects for various industries.However,the low loading of Pt with excellent performance for efficient and stable nanocatalysts still presents a considerable challenge.In this study,nanocatalysts with ultralow Pt content,excellent performance,and carbon black as support were prepared through in-situ synthesis.These~2-nm particles uniformly and stably dispersed on carbon black because of the strong s-p-d orbital hybridizations between carbon black and Pt,which suppressed the agglomeration of Pt ions.This unique structure is beneficial for the hydrogen evolution reaction.The catalysts exhibited remarkable catalytic activity for hydrogen evolution reaction,exhibiting a potential of 100 mV at 100 mA·cm^(-2),which is comparable to those of commercial Pt/C catalysts.Mass activity(1.61 A/mg)was four times that of a commercial Pt/C catalyst(0.37 A/mg).The ultralow Pt loading(6.84wt%)paves the way for the development of next-generation electrocatalysts.

Boosting Oxygen Evolution Reaction Performance on NiFe‑Based Catalysts Through d‑Orbital Hybridization

Anion-exchange membrane water electrolyzers(AEMWEs)for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based catalysts.By introducing a third metal into NiFe-based catalysts to construct asymmetrical M-NiFe units,the d-orbital and electronic structures can be adjusted,which is an important strategy to achieve sufficient oxygen evolution reaction(OER)performance in AEMWEs.Herein,the ternary NiFeM(M:La,Mo)catalysts featured with distinct M-NiFe units and varying d-orbitals are reported in this work.Experimental and theoretical calculation results reveal that the doping of La leads to optimized hybridization between d orbital in NiFeM and 2p in oxygen,resulting in enhanced adsorption strength of oxygen intermediates,and reduced rate-determining step energy barrier,which is responsible for the enhanced OER performance.More critically,the obtained NiFeLa catalyst only requires 1.58 V to reach 1 A cm^(−2) in an anion exchange membrane electrolyzer and demonstrates excellent long-term stability of up to 600 h.

Direct partial oxidation of methane to methanol:Reaction zones and role of catalyst location

Direct partial oxidation of methane to methanol was investigated in a specially designed reactor. Methanol yield of about 7%-8% was obtained in gas phase partial oxidation. It was proposed that the reactor could be divided into three reaction zones, namely pre-reaction zone, fierce reaction zone, and post-reaction zone, when the temperature was high enough to initiate a reaction. The oxidation of methane proceeded and was completed mostly in the fierce reaction zone. When the reactant mixture entered the post-reaction zone, only a small amount of produced methanol would bring about secondary reactions, because molecular oxygen had been exhausted in the fierce reaction zone. A catalyst, if necessary, should be placed either in the pre-reaction zone, to initiate a partial oxidation reaction at a lower temperature, or in the fierce reaction zone to control the homogeneous free radical reaction.

Scattering Resonance States and Partial Potential Energy Surface of Reaction I+HI(v=0)→IH(v′=0) +I

The partial potential energy surface of the I ＋ HI →IH ＋ I reaction involving the translational and vibrational motions has been constructed at the QCISD（ T ）//MP4SDQ level with the pseudo potential method that is helpful to interpreting the scattering resonance states. The lifetimes of the scattering resonance states in the title reaction obtained from the partial potential energy surface are about 90-120 fs, which agrees with the result of high-resolved threshold photodetachment spectroscopy of anion IHI^- measured by Neumark.

Effect of calcination temperature and reaction conditions on methane partial oxidation using lanthanum-based perovskite as oxygen donor

We investigated the effect of calcination temperature, reaction temperature, and different amounts of replenished lattice oxygen on the partial oxidation of methane （POM） to synthesis gas using perovskite-type LaFeO3 oxide as oxygen donor instead of gaseous oxygen, which was prepared by the sol-gel method, and the oxides were characterized by XRD, TG/DTA, and BET. The results indicated that the particle size increased with the calcination temperature increasing, while BET and CH4 conversion declined with the calcination temperature increasing using LaFeO3 oxide as oxygen donor in the absence of gaseous oxygen. CO selectivity remained at a high level such as above 92%, and increased slightly as the calcination temperature increased. Exposure of LaFeO3 oxides to methane atmosphere enhanced the oxygen migration of in the bulk with time online owing to the loss of lattice oxygen and reduction of the oxidative stated Fe ion simultaneously, The high reaction temperature was favorable to the migration of oxygen species from the bulk toward the surface for the synthesis gas production with high CO selectivity. The product distribution and evolution for POM by sequential redox reaction was determined by amounts of replenished lattice oxygen with gaseous oxygen. The optimal process should decline the total oxidation of methane, and increase the selectivity of partial oxidation of methane.

Effects of the partial replacement of La by M(M=Ce,Ca and Sr) in La_(2-x)M_xCuO_4 perovskites on catalysis of the water-gas shift reaction

The performance of La2-x M x CuO4 perovskites （where M=Ce,Ca or Sr） as catalysts for the water-gas shift reaction was investigated at 290℃ and 360℃.The catalysts were characterized by EDS,XRD,N2 adsorption-desorption,XPS and XANES.The XRD results showed that all the perovskites exhibited a single phase （the presence of perovskite structure）,suggesting the incorporation of metals in the perovskite structure.The XPS and XANES results showed the presence of Cu2＋ on the surface.The perovskites that exhibited the best catalytic performance were La 2 x Ce x CuO 4 perovskites,with CO conversions of 85% 90%.Moreover,these perovskites have higher surface areas and larger amounts of Cu on the surface.And Ce has a higher filled energy level than the other metals,increasing the energy of the valence band of Ce and providing more electrons for the reaction.Besides,the La1.80Ca0.20CuO4 perovskite showed a good catalytic performance.

Interfacial reactions and diffusion path in partial transient liquid-phase bonding of Si_3N_4/Ti/Ni/Ti/Si_3N_4

The interfacial reactions in partial transient liquid-phase bonding of Si3N4 ceramics with Ti/Ni/Ti interlayers were studied by means of scanning electron microscopy （SEM）, energy dispersive spectrometry （EDS） and X-ray diffractometry （XRD）. It was shown that the interfacial structure of Si3N4/TiN/Ti5Si3+Ti5Si4 + Ni3Si/ （NiTi ） /Ni3Ti/ Ni was formed after bonding. The activation energies for TiN layer and the mixed reaction layer of Ti5Si3 + Ti5Si4 + Ni3Si are 546. 8 kJ/mol and 543. 9 kJ/mol, respectively. The formation and transition processes of interface layer sequence in the joint were clarified by diffusion path. An important characteristic, which is different from the conventional brazing and soid-state diffusion bonding, has been found, i. e., during the partial transient liquid-phase bonding, not only the reaction layers which have formed grow, but also the diffusion path in the subsequent reaction changes because of the remarkable variation of the concentration on the metal side.

Effects of Partially N-acetylated Chitosans to Elicit Resistance Reaction on Brassica napus L.

The effects to elicit resistance reaction on oilseed rape (Brassica napus L. cv Xinongchangjiao ) by four partially N-acetylated chitosan 7B, 8B, 9B and 10B (Degree of acetylation (D. A.) is 30% , 20% , 10%, 0%, respectively) and Glycol chitosan (GC, D.A. is 0%) were investigated and compared. Results showed that chitosan were similar to salicylic acid (SA), and could induce resistance reaction, but the reaction was influenced by the degree of acetylation of chitosan. Fully deacetylated chitosans, 10B and GC, elicited chitinase activity, but partially acetylated chitosan, 7B, 8B and 9B, inhibited chitinase activity. Phenyalanine ammonia-lyase (PAL) was also elicited. Elicitor activity increased with on increasing degree of acetylation, 7B induced highest PAL activity among all chitosans. All chitosans induced peroxidase (POD) in a similar level. After elicited by glycol chitosan, like SA treatment, the seedlings increased disease resistance to Sclerotinia sclerotiorum significantly.

Reaction视频中用户弹幕信息交互行为的情感反应生成机理研究

深入挖掘Reaction视频中弹幕信息交互行为的情感反应机理有助于理解用户弹幕创作背后的情感生成原因及情感变化过程。本文基于情感反应模型,利用定向内容分析法对哔哩哔哩网站中11个热门视频的弹幕信息资源、视频内容以及reactor反应情况展开编码研究,构建了Reaction视频中用户弹幕信息交互行为的情感反应生成机理模型。研究发现,Reaction视频弹幕信息交互行为中的情感反应生成机理总体上遵循“信息刺激-情感反应”的路径,信息刺激有时会独立唤醒情绪或特定情感态度,有时也会通过唤醒特定情感态度进而影响情绪或内化情感态度的生成。该模型有助于提升情感反应理论在计算机协助交流中的情境化探索,也将为社交媒体中用户与信息交互提供优化建议。

Effect of Ni Loading and Reaction Conditions on Partial Oxidation of Methane to Syngas

The partial oxidation of methane to synthesis gas is studied in this paperover Ni/Al_2O_3 catalysts under atmospheric pressure. The effects of Ni loading on the activity andstability of catalysts with 5 mm α-Al_2O_3 and θ-Al_2O_3 pellets as supports were measured in acontinuous fixed bed reactor. It is found that the optimum Ni loading is 10%. And the effect ofreaction conditions on partial oxidation of methane is also studied. The methane conversion and COselectivity increase with the increase of the reaction temperature and the space velocity on10%Ni/α-Al_2O_3 catalysts. The best CH_4/O_2 mole ratio is 2 for CO selectivity, and the optimumspace velocity is 5.4x10^5 h^(1).

融合Partial卷积与残差细化的遥感影像建筑物提取算法

由于高空间分辨率遥感图像中背景与建筑物对象的相似度高,导致网络难以兼顾不同大小的建筑物,建筑边界区域的像素与背景混淆,建筑边界很容易被漏检。为解决上述问题,提出融合Partial卷积与残差细化的遥感影像建筑物提取算法(UUNet)。以U-Net为基线网络,首先,改进编码器。在编码器前端加入两个Conv4×4,在最初扩大感受野,捕捉更多遥感影像特征信息,利用Partial卷积(PConv3×3)构造的PC模块,增强编码器提取多尺度建筑物特征的能力,用Conv2×2进行两倍下采样,减少建筑物特征信息丢失。其次,减少参数量。裁剪U-Net网络解码器三层结构为UUNet网络解码器。最后,增加改进的残差细化模块。在解码器输出端构造裁剪到三层结构的U型残差细化模块,对解码器输出的粗糙建筑物特征图进行进一步提纯,使建筑物边缘信息更加清晰,网络解码器与U型残差细化模块编码器进行跳跃连接,保留最初特征,将SimAM嵌入细化模块中,提高建筑物关注度,优化网络改善边界模糊,提升目标边界提取质量。在Satellite datasetⅡ(East Asia)数据集上进行消融实验,UUNet比U-Net的IoU_(Building)、IoU_(Background)、F1、OA和MIoU分别提高2.78个百分点、0.12个百分点、1.91个百分点、0.19个百分点、1.45个百分点,表明UUNet网络优于基线网络;在Satellite datasetⅡ(East Asia)数据集和WHU数据集上做对比实验,UUNet相较于现有的主流算法更优,能够显著地提升高分辨率遥感影像中建筑物提取的效果。

Tuning electronic structure of RuO_(2)by single atom Zn and oxygen vacancies to boost oxygen evolution reaction in acidic medium

The poor stability of RuO_(2)electrocatalysts has been the primary obstacles for their practical application in polymer electrolyte membrane electrolyzers.To dramatically enhance the durability of RuO_(2)to construct activity-stability trade-off model is full of significance but challenging.Herein,a single atom Zn stabilized RuO_(2)with enriched oxygen vacancies(SA Zn-RuO_(2))is developed as a promising alternative to iridium oxide for acidic oxygen evolution reaction(OER).Compared with commercial RuO_(2),the enhanced Ru–O bond strength of SA Zn-RuO_(2)by forming Zn-O-Ru local structure motif is favorable to stabilize surface Ru,while the electrons transferred from Zn single atoms to adjacent Ru atoms protects the Ru active sites from overoxidation.Simultaneously,the optimized surrounding electronic structure of Ru sites in SA ZnRuO_(2)decreases the adsorption energies of OER intermediates to reduce the reaction barrier.As a result,the representative SA Zn-RuO_(2)exhibits a low overpotential of 210 mV to achieve 10 mA cm^(-2)and a greatly enhanced durability than commercial RuO_(2).This work provides a promising dual-engineering strategy by coupling single atom doping and vacancy for the tradeoff of high activity and catalytic stability toward acidic OER.

Exciting lattice oxygen of nickel–iron bi-metal alkoxide for efficient electrochemical oxygen evolution reaction

High efficiency,cost-effective and durable electrocatalysts are of pivotal importance in energy conversion and storage systems.The electro-oxidation of water to oxygen plays a crucial role in such energy conversion technologies.Herein,we report a robust method for the synthesis of a bimetallic alkoxide for efficient oxygen evolution reaction(OER)for alkaline electrolysis,which yields current density of 10 mA cm^(-2)at an overpotential of 215 mV in 0.1 M KOH electrolyte.The catalyst demonstrates an excellent durability for more than 540 h operation with negligible degradation in activity.Raman spectra revealed that the catalyst underwent structure reconstruction during OER,evolving into oxyhydroxide,which was the active site proceeding OER in alkaline electrolyte.In-situ synchrotron X-ray absorption experiment combined with density functional theory calculation suggests a lattice oxygen involved electrocatalytic reaction mechanism for the in-situ generated nickel–iron bimetal-oxyhydroxide catalyst.This mechanism together with the synergy between nickel and iron are responsible for the enhanced catalytic activity and durability.These findings provide promising strategies for the rational design of nonnoble metal OER catalysts.

A comparative study of data-driven battery capacity estimation based on partial charging curves

With its generality and practicality, the combination of partial charging curves and machine learning(ML) for battery capacity estimation has attracted widespread attention. However, a clear classification,fair comparison, and performance rationalization of these methods are lacking, due to the scattered existing studies. To address these issues, we develop 20 capacity estimation methods from three perspectives:charging sequence construction, input forms, and ML models. 22,582 charging curves are generated from 44 cells with different battery chemistry and operating conditions to validate the performance. Through comprehensive and unbiased comparison, the long short-term memory(LSTM) based neural network exhibits the best accuracy and robustness. Across all 6503 tested samples, the mean absolute percentage error(MAPE) for capacity estimation using LSTM is 0.61%, with a maximum error of only 3.94%. Even with the addition of 3 m V voltage noise or the extension of sampling intervals to 60 s, the average MAPE remains below 2%. Furthermore, the charging sequences are provided with physical explanations related to battery degradation to enhance confidence in their application. Recommendations for using other competitive methods are also presented. This work provides valuable insights and guidance for estimating battery capacity based on partial charging curves.

Deformable Catalytic Material Derived from Mechanical Flexibility for Hydrogen Evolution Reaction

Deformable catalytic material with excellent flexible structure is a new type of catalyst that has been applied in various chemical reactions,especially electrocatalytic hydrogen evolution reaction(HER).In recent years,deformable catalysts for HER have made great progress and would become a research hotspot.The catalytic activities of deformable catalysts could be adjustable by the strain engineering and surface reconfiguration.The surface curvature of flexible catalytic materials is closely related to the electrocatalytic HER properties.Here,firstly,we systematically summarized self-adaptive catalytic performance of deformable catalysts and various micro–nanostructures evolution in catalytic HER process.Secondly,a series of strategies to design highly active catalysts based on the mechanical flexibility of lowdimensional nanomaterials were summarized.Last but not least,we presented the challenges and prospects of the study of flexible and deformable micro–nanostructures of electrocatalysts,which would further deepen the understanding of catalytic mechanisms of deformable HER catalyst.

Theoretical Study of the Scattering Resonance State, Reaction Mechanism and Partial Potential Energy Surface of the F+CH4→HF+CH3 Reaction

The partial potential energy surface was constructed by ab initio method [QCISD（T）/6- 311＋＋G（2df,2pd）]for F＋CH4→HF＋CH3 reaction system. It not only explained the reaction mechanism brought forward by Diego Troya by means of quasiclassical trajectory （QCT） but also successfully validated Kopin Liu＇s experimental phenomena about the existence of the reactive resonance. The lifetime of the scattering resonance state was about 0.07 ps. All these were in agreement with the experiments.

“Buckets effect”in the kinetics of electrocatalytic reactions

In this study,we systematically investigated the effect of proton concentration on the kinetics of the oxygen reduction reaction(ORR)on Pt(111)in acidic solutions.Experimental results demonstrate a rectangular hyperbolic relationship,i.e.,the ORR current excluding the effect of other variables increases with proton concentration and then tends to a constant value.We consider that this is caused by the limitation of ORR kinetics by the trace oxygen concentration in the solution,which determines the upper limit of ORR kinetics.A model of effective concentration is further proposed for rectangular hyperbolic relationships:when the reactant concentration is high enough to reach a critical saturation concentration,the effective reactant concentration will become a constant value.This could be due to the limited concentration of a certain reactant for reactions involving more than one reactant or the limited number of active sites available on the catalyst.Our study provides new insights into the kinetics of electrocatalytic reactions,and it is important for the proper evaluation of catalyst activity and the study of structureperformance relationships.

Precisely Control Relationship between Sulfur Vacancy and H Absorption for Boosting Hydrogen Evolution Reaction

Ef fective and robust catalyst is the core of water splitting to produce hydrogen.Here, we report an anionic etching method to tailor the sulfur vacancy(VS) of NiS_(2) to further enhance the electrocatalytic performance for hydrogen evolution reaction(HER). With the VS concentration change from 2.4% to 8.5%, the H* adsorption strength on S sites changed and NiS_(2)-VS 5.9% shows the most optimized H* adsorption for HER with an ultralow onset potential(68 m V) and has long-term stability for 100 h in 1 M KOH media. In situ attenuated-total-reflection Fourier transform infrared spectroscopy(ATR-FTIRS) measurements are usually used to monitor the adsorption of intermediates. The S-H* peak of the Ni S_(2)-VS 5.9% appears at a very low voltage, which is favorable for the HER in alkaline media. Density functional theory calculations also demonstrate the Ni S_(2)-VS 5.9% has the optimal |ΔG^(H*)| of 0.17 e V. This work offers a simple and promising pathway to enhance catalytic activity via precise vacancies strategy.

Preoperative albumin-bilirubin score and liver resection percentage determine postoperative liver regeneration after partial hepatectomy

BACKGROUND The success of liver resection relies on the ability of the remnant liver to regenerate.Most of the knowledge regarding the pathophysiological basis of liver regeneration comes from rodent studies,and data on humans are scarce.Additionally,there is limited knowledge about the preoperative factors that influence postoperative regeneration.AIM To quantify postoperative remnant liver volume by the latest volumetric software and investigate perioperative factors that affect posthepatectomy liver regenera-tion.METHODS A total of 268 patients who received partial hepatectomy were enrolled.Patients were grouped into right hepatectomy/trisegmentectomy(RH/Tri),left hepa-tectomy(LH),segmentectomy(Seg),and subsegmentectomy/nonanatomical hepatectomy(Sub/Non)groups.The regeneration index(RI)and late rege-neration rate were defined as(postoperative liver volume)/[total functional liver volume(TFLV)]×100 and(RI at 6-months-RI at 3-months)/RI at 6-months,respectively.The lower 25th percentile of RI and the higher 25th percentile of late regeneration rate in each group were defined as“low regeneration”and“delayed regeneration”.“Restoration to the original size”was defined as regeneration of the liver volume by more than 90%of the TFLV at 12 months postsurgery.RESULTS The numbers of patients in the RH/Tri,LH,Seg,and Sub/Non groups were 41,53,99 and 75,respectively.The RI plateaued at 3 months in the LH,Seg,and Sub/Non groups,whereas the RI increased until 12 months in the RH/Tri group.According to our multivariate analysis,the preoperative albumin-bilirubin(ALBI)score was an independent factor for low regeneration at 3 months[odds ratio(OR)95%CI=2.80(1.17-6.69),P=0.02;per 1.0 up]and 12 months[OR=2.27(1.01-5.09),P=0.04;per 1.0 up].Multivariate analysis revealed that only liver resection percentage[OR=1.03(1.00-1.05),P=0.04]was associated with delayed regeneration.Furthermore,multivariate analysis demonstrated that the preoperative ALBI score[OR=2.63(1.00-1.05),P=0.02;per 1.0 up]and liver resection percentage[OR=1.02(1.00-1.05),P=0.04;per 1.0 up]were found to be independent risk factors associated with volume restoration failure.CONCLUSION Liver regeneration posthepatectomy was determined by the resection percentage and preoperative ALBI score.This knowledge helps surgeons decide the timing and type of rehepatectomy for recurrent cases.