期刊文献+
共找到54,245篇文章
< 1 2 250 >
每页显示 20 50 100
Knowledge Reasoning Method Based on Deep Transfer Reinforcement Learning:DTRLpath
1
作者 Shiming Lin Ling Ye +4 位作者 Yijie Zhuang Lingyun Lu Shaoqiu Zheng Chenxi Huang Ng Yin Kwee 《Computers, Materials & Continua》 SCIE EI 2024年第7期299-317,共19页
In recent years,with the continuous development of deep learning and knowledge graph reasoning methods,more and more researchers have shown great interest in improving knowledge graph reasoning methods by inferring mi... In recent years,with the continuous development of deep learning and knowledge graph reasoning methods,more and more researchers have shown great interest in improving knowledge graph reasoning methods by inferring missing facts through reasoning.By searching paths on the knowledge graph and making fact and link predictions based on these paths,deep learning-based Reinforcement Learning(RL)agents can demonstrate good performance and interpretability.Therefore,deep reinforcement learning-based knowledge reasoning methods have rapidly emerged in recent years and have become a hot research topic.However,even in a small and fixed knowledge graph reasoning action space,there are still a large number of invalid actions.It often leads to the interruption of RL agents’wandering due to the selection of invalid actions,resulting in a significant decrease in the success rate of path mining.In order to improve the success rate of RL agents in the early stages of path search,this article proposes a knowledge reasoning method based on Deep Transfer Reinforcement Learning path(DTRLpath).Before supervised pre-training and retraining,a pre-task of searching for effective actions in a single step is added.The RL agent is first trained in the pre-task to improve its ability to search for effective actions.Then,the trained agent is transferred to the target reasoning task for path search training,which improves its success rate in searching for target task paths.Finally,based on the comparative experimental results on the FB15K-237 and NELL-995 datasets,it can be concluded that the proposed method significantly improves the success rate of path search and outperforms similar methods in most reasoning tasks. 展开更多
关键词 Intelligent agent knowledge graph reasoning REINFORCEMENT transfer learning
下载PDF
Challenges Experienced by Nurse Educators in Promoting Acquisition of Clinical Reasoning Skills by the Undergraduate Nursing Students: A Qualitative Exploratory Study
2
作者 Omero. G. Mwale Mukwato-Katowa Patricia Marjorie Kabinga-Makukula 《Open Journal of Nursing》 2024年第8期459-476,共18页
Background: Clinical reasoning is an essential skill for nursing students since it is required to solve difficulties that arise in complex clinical settings. However, teaching and learning clinical reasoning skills is... Background: Clinical reasoning is an essential skill for nursing students since it is required to solve difficulties that arise in complex clinical settings. However, teaching and learning clinical reasoning skills is difficult because of its complexity. This study, therefore aimed at exploring the challenges experienced by nurse educators in promoting acquisition of clinical reasoning skills by undergraduate nursing students. Methods: A qualitative exploratory research design was used in this study. The participants were purposively sampled and recruited into the study. Data were collected using semi-structured interview guides. Thematic analysis method was used to analyze the collected data The principles of beneficence, respect of human dignity and justice were observed. Results: The findings have shown that clinical learning environment, lacked material and human resources. The students had no interest to learn the skill. There was also knowledge gap between nurse educators and clinical nurses. Lack of role model was also an issue and limited time exposure. Conclusion: The study revealed that nurse educators encounter various challenges in promoting the acquisition of clinical reasoning skills among undergraduate nursing students. Training institutions and hospitals should periodically revise the curriculum and provide sufficient resources to facilitate effective teaching and learning of clinical reasoning. Nurse educators must also update their knowledge and skills through continuous professional development if they are to transfer the skill effectively. 展开更多
关键词 ACQUISITION Clinical reasoning Skills Undergraduate Nursing Student Nurse Educator
下载PDF
Assessing the Levels of Clinical Reasoning Skills Using Self-Assessment of Clinical Reflection and Reasoning in Undergraduate Nursing Students: A Descriptive Comparative Study
3
作者 Omero G. Mwale Patricia K. Mukwato Marjorie K. Makukula‡ 《Open Journal of Nursing》 2024年第7期283-297,共15页
Background: Clinical reasoning is a critical cognitive skill that enables undergraduate nursing students to make clinically sound decisions. A lapse in clinical reasoning can result in unintended harm to patients. The... Background: Clinical reasoning is a critical cognitive skill that enables undergraduate nursing students to make clinically sound decisions. A lapse in clinical reasoning can result in unintended harm to patients. The aim of the study was to assess and compare the levels of clinical reasoning skills between third year and fourth year undergraduate nursing students. Methods: The study utilized a descriptive comparative research design, based on the positivism paradigm. 410 undergraduate nursing students were systematically sampled and recruited into the study. The researchers used the Self-Assessment of Clinical Reflection and Reasoning questionnaire to collect data on clinical reasoning skills from third- and fourth-year nursing students while adhering to ethical principles of human dignity. Descriptive statistics were done to analyse the level of clinical reasoning and an independent sample t-test was performed to compare the clinical reasoning skills of the student. A p value of 0.05 was accepted. Results: The results of the study revealed that the mean clinical reasoning scores of the undergraduate nursing students were knowledge/theory application (M = 3.84;SD = 1.04);decision-making based on experience and evidence (M = 4.09;SD = 1.01);dealing with uncertainty (M = 3.93;SD = 0.87);reflection and reasoning (M = 3.77;SD = 3.88). The mean difference in clinical reasoning skills between third- and fourth-year undergraduate nursing students was not significantly different from an independent sample t-test scores (t = −1.08;p = 0.28);(t = −0.29;p = 0.73);(t = 1.19;p = 0.24);(t = −0.57;p = 0.57). Since the p-value is >0.05, the null hypothesis (H0) “there is no significantno significant difference in clinical reasoning between third year and fourth year undergraduate nursing students”, was accepted. Conclusion: This study has shown that the level of clinical reasoning skills of the undergraduate nursing students was moderate to low. This meant that the teaching methods have not been effective to improve the students clinical reasoning skills. Therefore, the training institutions should revise their curriculum by incorporating new teaching methods like simulation to enhance students’ clinical reasoning skills. In conclusion, evaluating clinical reasoning skills is crucial for addressing healthcare issues, validating teaching methods, and fostering continuous improvement in nursing education. 展开更多
关键词 Clinical Competences Clinical reasoning Skills Undergraduate Nursing Student
下载PDF
The Effect of the Menstrual Cycle on Cognitive Performance: Spatial Reasoning, Visual & Numerical Memory
4
作者 Anusha Asim Rifah Maryam +4 位作者 Zahra Sultan Areej Shahid Fatima Yousaf Ishika Khandelwal Isra Allana 《Journal of Behavioral and Brain Science》 2024年第10期276-296,共21页
The menstrual cycle has been a topic of interest in relation to behavior and cognition for many years, with historical beliefs associating it with cognitive impairment. However, recent research has challenged these be... The menstrual cycle has been a topic of interest in relation to behavior and cognition for many years, with historical beliefs associating it with cognitive impairment. However, recent research has challenged these beliefs and suggested potential positive effects of the menstrual cycle on cognitive performance. Despite these emerging findings, there is still a lack of consensus regarding the impact of the menstrual cycle on cognition, particularly in domains such as spatial reasoning, visual memory, and numerical memory. Hence, this study aimed to explore the relationship between the menstrual cycle and cognitive performance in these specific domains. Previous studies have reported mixed findings, with some suggesting no significant association and others indicating potential differences across the menstrual cycle. To contribute to this body of knowledge, we explored the research question of whether the menstrual cycles have a significant effect on cognition, particularly in the domains of spatial reasoning, visual and numerical memory in a regionally diverse sample of menstruating females. A total of 30 menstruating females from mixed geographical backgrounds participated in the study, and a repeated measures design was used to assess their cognitive performance in two phases of the menstrual cycle: follicular and luteal. The results of the study revealed that while spatial reasoning was not significantly related to the menstrual cycle (p = 0.256), both visual and numerical memory had significant positive associations (p < 0.001) with the luteal phase. However, since the effect sizes were very small, the importance of this relationship might be commonly overestimated. Future studies could thus entail designs with larger sample sizes, including neuro-biological measures of menstrual stages, and consequently inform competent interventions and support systems. 展开更多
关键词 Menstrual Health Menstrual Cycle MENSTRUATION Mental Health COGNITION Spatial reasoning Visual Memory Numerical Memory
下载PDF
Er掺杂PbF_(2)晶体的局域团簇结构与光谱性能研究
5
作者 李琳 张沛雄 +4 位作者 谭俊成 朱思祁 尹浩 李真 陈振强 《人工晶体学报》 CAS 北大核心 2024年第7期1112-1120,共9页
本文采用Bridgman法成功生长了一系列Er∶PbF_(2)晶体。利用基于密度泛函理论的第一性原理计算详细研究了Er^(3+)在PbF_(2)晶体中的团簇效应。首次获得了Er∶PbF_(2)晶体的上转换发光特性(发光强度、颜色变化)与团簇结构之间的关系。研... 本文采用Bridgman法成功生长了一系列Er∶PbF_(2)晶体。利用基于密度泛函理论的第一性原理计算详细研究了Er^(3+)在PbF_(2)晶体中的团簇效应。首次获得了Er∶PbF_(2)晶体的上转换发光特性(发光强度、颜色变化)与团簇结构之间的关系。研究发现,随着Er^(3+)浓度增加,团簇从单聚体向高阶构型演化,Er^(3+)离子之间的距离先减小后增大,这使得上转换发光中的红色发射强度先增大后减小,红绿发光比也在Er^(3+)浓度高于6.5%(摩尔分数)后逐渐减小,即发光颜色可以从红色调整为黄绿色。该研究证明了稀土离子团簇的结构演化可以调控Er∶PbF_(2)的光谱特性,为多色发光材料的设计提供一种新方法。 展开更多
关键词 er∶PbF_(2)晶体 上转换发光 密度泛函理论 铒离子团簇 光谱性能
下载PDF
Nd:YAG激光和Er:YAG激光治疗牙本质敏感的临床对比研究 被引量:1
6
作者 张子旋 周璇 刘立访 《口腔材料器械杂志》 2024年第1期60-64,共5页
目的探讨Nd:YAG激光和Er:YAG激光治疗牙本质敏感(Dentin Hypersensitivity,DH)的效果。方法收治佛山市第一人民医院2021年3月至2022年12月期间就诊的牙本质敏感93例患者共259颗牙,患者均在受到冷、酸、甜及刷牙等刺激后存在酸痛感,诊断... 目的探讨Nd:YAG激光和Er:YAG激光治疗牙本质敏感(Dentin Hypersensitivity,DH)的效果。方法收治佛山市第一人民医院2021年3月至2022年12月期间就诊的牙本质敏感93例患者共259颗牙,患者均在受到冷、酸、甜及刷牙等刺激后存在酸痛感,诊断为DH。随机分为3组,分别给予常规脱敏剂治疗组(31例患者,86颗患牙)、Nd:YAG激光治疗组(31例患者,90颗患牙)、Er:YAG激光治疗组(31例患者,83颗患牙)3种方法,其中激光组尝试改变激光照射参数及时间,寻求最好的治疗参数。对比3种脱敏方法的即刻效果、1周效果、1个月效果及3个月效果。结果治疗前3组对冷空气及机械刺激反应的VAS评分无明显差异(P>0.05);治疗后各个时间段Nd:YAG激光组和Er:YAG激光组对冷空气刺激反应均明显轻于对照组(P<0.05)。治疗后各个时间段Nd:YAG激光组和Er:YAG激光组对机械刺激反应均明显轻于对照组(P<0.05)。3组经治疗后均获得一定疗效,Nd:YAG激光组和Er:YAG激光组的效果好于常规组,但差异无统计学意义(P>0.05)。结论Nd:YAG激光、Er:YAG激光治疗DH与常规脱敏方法相比,明显降低患者的冷空气和机械刺激反应,在一定程度上提升了治疗效果。 展开更多
关键词 牙本质敏感 ND:YAG激光 er:YAG激光 Bifluorid 12 脱敏剂量疗效
下载PDF
不同雌激素水平大鼠舌下神经核中ERα的表达
7
作者 李环 梁军 侯玉霞 《山西医科大学学报》 CAS 2024年第6期735-739,共5页
目的 研究雌性大鼠去卵巢对雌激素受体ERα在舌下神经核表达的影响。方法 选取90只8周龄雌性SD大鼠,体质量(250±25)g,随机等量分为假手术组(sham组)、去卵巢组(OVX组)、去卵巢+雌二醇组(OVX+E2组),建立不同雌激素水平大鼠模型。sha... 目的 研究雌性大鼠去卵巢对雌激素受体ERα在舌下神经核表达的影响。方法 选取90只8周龄雌性SD大鼠,体质量(250±25)g,随机等量分为假手术组(sham组)、去卵巢组(OVX组)、去卵巢+雌二醇组(OVX+E2组),建立不同雌激素水平大鼠模型。sham组去除大鼠卵巢周围少量脂肪,OVX组去除卵巢,OVX+E2组去除卵巢后皮下注射雌二醇;使用免疫组织化学检测ERα在舌下神经核表达;real-time PCR、Western blot检测ERα mRNA、蛋白表达。结果 三组大鼠舌下神经核均存在ERα阳性表达。与sham组比较,OVX组ERα mRNA及蛋白含量明显降低(P<0.01);与OVX组比较,OVX+E2组ERα mRNA及蛋白含量明显升高(P<0.01);sham组和OVX+E2组间差异无统计学意义(P>0.05)。结论 雌激素受体ERα在不同雌激素水平雌性大鼠舌下神经核均存在表达,ERα mRNA及蛋白的表达均受雌激素水平调节。 展开更多
关键词 去卵巢 雌激素 舌下神经核 erΑ 大鼠
下载PDF
ER50-6焊丝激光焊接Q345B/304异种钢接头组织与性能
8
作者 刘海 陈辉 《精密成形工程》 北大核心 2024年第6期129-137,共9页
目的研究异种钢激光填丝焊接工艺对焊接组织与性能的影响规律,以降低Q345B/304异种钢激光焊接的成本,扩大异种钢激光焊接的应用范围,使其能够满足使用要求,实现Q345B/304异种钢激光焊接低成本的产业化应用。方法采用便宜的ER50-6碳钢焊... 目的研究异种钢激光填丝焊接工艺对焊接组织与性能的影响规律,以降低Q345B/304异种钢激光焊接的成本,扩大异种钢激光焊接的应用范围,使其能够满足使用要求,实现Q345B/304异种钢激光焊接低成本的产业化应用。方法采用便宜的ER50-6碳钢焊丝代替价格高昂的ER308L不锈钢焊丝以及不锈钢药芯焊丝对Q345B/304异种钢进行激光焊接,主要采用填丝ER50-6焊丝对5 mm厚的Q345B/304异种钢板进行激光焊接,再结合焊缝区、熔合区及热影响区的纳观-微观-宏观多尺度表征和测试结果,研究不同工艺参数下焊接接头的组织与结构,同时结合焊接工艺参数和多尺度的表征结果,研究焊接接头硬度、焊缝中元素分布、物相特征、力学性能的变化规律。结果当激光功率为4.5 kW、焊接速度为6 mm/s、焊丝直径为1.2 mm、装配间隙为1 mm、送丝速度为2.5 m/min时,焊缝成形最好,且在焊缝中没有出现大量的M_(23)C_(6)和σ等有害相,焊接接头的力学性能等也完全满足使用要求。结论采用ER50-6焊丝对Q345B/304异种钢进行激光焊接,能够得到完全符合质量要求的焊接接头,且降低了焊接成本。 展开更多
关键词 异种钢 激光焊接 er50-6 焊接质量 成本控制
下载PDF
Er:YAG激光和传统车针去龋后牙本质粘接强度的比较
9
作者 黄莉莉 张佳钰 《医疗卫生装备》 CAS 2024年第4期56-60,共5页
目的:比较使用不同模式Er:YAG激光以及传统车针去龋后牙本质与复合树脂的粘接强度。方法:选用人类离体磨牙模拟龋坏,分别采用Er:YAG激光中短脉冲(medium short pulse,MSP)模式、Er:YAG激光超短脉冲(super short pulse,SSP)模式和传统车... 目的:比较使用不同模式Er:YAG激光以及传统车针去龋后牙本质与复合树脂的粘接强度。方法:选用人类离体磨牙模拟龋坏,分别采用Er:YAG激光中短脉冲(medium short pulse,MSP)模式、Er:YAG激光超短脉冲(super short pulse,SSP)模式和传统车针去除模拟的龋坏后,采用自酸蚀粘接剂将牙体标本与复合树脂粘接制成试件。使用万能试验机对试件进行拉伸试验,测得断裂负荷和粘接强度,并采用单因素方差分析和Tukey多重比较进行统计学分析。采用扫描电子显微镜观察3种不同去龋方式处理后的牙本质表面形态,以及涂布自酸蚀粘接剂并固化后试件的横截面形态。结果:使用Er:YAG激光MSP模式处理后牙本质与复合树脂的粘接强度最高,SSP模式处理后次之,传统车针处理后最低,但差异无统计学意义(P>0.05)。扫描电子显微镜图像显示,Er:YAG激光MSP模式处理后的牙本质表面较平坦,牙本质小管内几乎没有残屑;Er:YAG激光SSP模式处理后的牙本质表面呈现鳞片状,牙本质小管内可见少量碎屑;而传统车针处理后牙本质小管大部分处于被表面牙本质部分甚至完全遮盖的状态,牙本质小管内充满残屑。结论:使用Er:YAG激光去龋相比传统车针去龋可以获得较好的牙本质粘接强度,且对牙本质小管的处理深度和洁净度明显优于传统车针去龋,其中MSP模式更佳。 展开更多
关键词 er:YAG激光 传统车针 去龋 牙本质 粘接强度
下载PDF
刺葡萄VdERD6L15基因克隆及功能分析
10
作者 刘洁 杨盛迪 +3 位作者 曾雅婷 白描 杨国顺 李双江 《果树学报》 CAS CSCD 北大核心 2024年第9期1770-1780,共11页
【目的】探究VdERD6L15在刺葡萄果实生长发育中的功能,从湘刺1号中克隆VdERD6L15基因及其启动子,进行基因功能研究和启动子活性分析。【方法】克隆VdERD6L15基因CDS序列,并对CDS进行生物信息学分析;构建VdERD6L15表达载体,并通过瞬时转... 【目的】探究VdERD6L15在刺葡萄果实生长发育中的功能,从湘刺1号中克隆VdERD6L15基因及其启动子,进行基因功能研究和启动子活性分析。【方法】克隆VdERD6L15基因CDS序列,并对CDS进行生物信息学分析;构建VdERD6L15表达载体,并通过瞬时转化烟草确定VdERD6L15基因编码蛋白的亚细胞定位;同时,通过在己糖缺陷型酵母菌株EBY.VW4000中异源表达VdERD6L15探究其功能;此外,通过启动子截短试验确定VdERD6L15启动子的核心区域。【结果】成功克隆刺葡萄VdERD6L15基因编码序列,该编码序列长1461 bp,可编码486个氨基酸,具有膜蛋白特征,属于单糖转运蛋白家族。亚细胞定位试验确认VdERD6L15蛋白主要定位于液泡膜上。通过在酵母菌株EBY.VW4000中进行异源表达,验证了VdERD6L15具有转运葡萄糖的能力。利用PlantCARE数据库对VdERD6L15启动子顺式作用元件进行分析,发现其主要包含光响应元件、干旱胁迫和激素响应元件。通过GUS染色分析,进一步确定候选基因VdERD6L15启动子的关键调控区域位于-500 bp到-1000 bp之间。【结论】VdERD6L15是一个定位在液泡膜上的糖转运蛋白,具有转运葡萄糖的功能;VdERD6L15启动子的核心元件位于ATG上游500~1000 bp之间。 展开更多
关键词 刺葡萄 VderD6L15 单糖转运蛋白 亚细胞定位 启动子活性
下载PDF
基于ER Rule的多分类器汽车评论情感分类研究
11
作者 周谧 周雅婧 +1 位作者 贺洋 方必和 《运筹与管理》 CSSCI CSCD 北大核心 2024年第5期161-168,共8页
该文针对汽车评论语料的情感二分类问题,提出一种基于证据推理规则的多分类器融合的情感分类方法。在情感特征构建方面,通过实验对比不同特征模型对分类结果的影响,并改进传统的TFIDF权重计算方法。同时,在此基础上使用ER Rule融合不同... 该文针对汽车评论语料的情感二分类问题,提出一种基于证据推理规则的多分类器融合的情感分类方法。在情感特征构建方面,通过实验对比不同特征模型对分类结果的影响,并改进传统的TFIDF权重计算方法。同时,在此基础上使用ER Rule融合不同分类器进行文本情感极性分析,并考虑各分类器的权重和可靠度。最后,爬取汽车网站上的评论数据对上述方法进行测试,并用公开的中文酒店评论语料数据进行了验证,结果表明该方法能够有效集成不同分类器的优点,与传统机器学习分类算法相比,其结果在Recall,F1值和Accuracy三个指标上得到了提高,与目前流行的深度学习算法和集成学习算法相比,其结果总体占优。 展开更多
关键词 证据推理规则 多分类器融合 TFIDF权重 深度学习算法 集成学习算法
下载PDF
高速拉拔ER70S-6焊丝钢生产工艺优化
12
作者 赵晓敏 罗海炯 +2 位作者 王刚 李学东 白彬亨 《包钢科技》 2024年第1期65-69,共5页
通过总结分析ER70S-6焊丝钢存在的质量问题,提出了有针对性的优化改进措施,重点对ER70S-6焊丝钢的化学成分范围、气体氮含量、尺寸精度、显微组织等关键指标严格控制,攻关后C、Si、Mn、N含量内控达标率提高,尺寸偏差C级精度得到改善,而... 通过总结分析ER70S-6焊丝钢存在的质量问题,提出了有针对性的优化改进措施,重点对ER70S-6焊丝钢的化学成分范围、气体氮含量、尺寸精度、显微组织等关键指标严格控制,攻关后C、Si、Mn、N含量内控达标率提高,尺寸偏差C级精度得到改善,而且消除了混晶异常组织。用户拉拔使用结果表明,优化后的焊丝钢质量得到进一步的提高,可满足用户拉拔速度28 m/s以上高速拉拔的要求。 展开更多
关键词 er70S-6焊丝钢 氮含量 尺寸精度 高速拉拔
下载PDF
Er∶YAG激光SWEEPS双脉冲模式激活荡洗在自由水域中的气泡动力学观测 被引量:1
13
作者 何新宇 李依洲 +4 位作者 聂铭远 于悦 陈浩天 潘翀 赵继志 《实用口腔医学杂志》 CAS CSCD 北大核心 2024年第1期64-70,共7页
目的:探究Er∶YAG激光光子增强的光声流(SWEEPS)技术在不同脉冲间隔参数条件下的蒸汽气泡动力学效应。方法:Er∶YAG激光手具连接工作尖放置于自由水域模型中,设置SWEEPS模式,150~600μs脉冲间隔激活。高速摄像机(200 000 Hz)摄录Er∶YA... 目的:探究Er∶YAG激光光子增强的光声流(SWEEPS)技术在不同脉冲间隔参数条件下的蒸汽气泡动力学效应。方法:Er∶YAG激光手具连接工作尖放置于自由水域模型中,设置SWEEPS模式,150~600μs脉冲间隔激活。高速摄像机(200 000 Hz)摄录Er∶YAG激光激活荡洗引起空穴效应的过程,matlab逐帧分析蒸汽气泡间的相互作用关系,及蒸汽气泡消失时刻气泡残余与激光工作尖之间的距离。实验数据经SPSS 19.0统计软件进行统计分析。结果:在自由水域中,Er∶YAG激光SWEEPS模式下,脉冲间隔设置的改变会引起两次脉冲激发的蒸汽气泡形成不同的相互作用关系,包括双气泡融合、双气泡撞击及双气泡脱离。其中,脉冲间隔设置为360~440μs时,双气泡撞击现象会使蒸汽气泡消失时气泡残余与激光工作尖之间达到最远距离。结论:在自由水域中,Er∶YAG激光双脉冲SWEEPS模式在不同的脉冲间隔设置下引起双气泡间形成不同的作用关系,该现象可能可以增强Er∶YAG激光空穴效应,强化激光激活荡洗的临床应用效果。 展开更多
关键词 er∶YAG激光 激光激活荡洗 气泡动力学 SWEEPS
下载PDF
棒状结构NaGdF_(4):Yb^(3+),Er^(3+)上转换发光性能的研究
14
作者 李鑫 李玉峰 +1 位作者 张栋梁 王觅堂 《功能材料》 CAS CSCD 北大核心 2024年第1期1130-1140,共11页
以乙二胺四乙酸二钠(EDTD-2Na)为螯合剂,采用水热法合成了棒状结构的NaGdF_(4):Yb^(3+),Er^(3+)纳米粉末。分别借助X射线衍射(XRD)、荧光光谱仪(PL)和扫描显微镜(SEM)对其晶体结构、发光强度和表面形貌进行分析和表征。探究了稀土前驱... 以乙二胺四乙酸二钠(EDTD-2Na)为螯合剂,采用水热法合成了棒状结构的NaGdF_(4):Yb^(3+),Er^(3+)纳米粉末。分别借助X射线衍射(XRD)、荧光光谱仪(PL)和扫描显微镜(SEM)对其晶体结构、发光强度和表面形貌进行分析和表征。探究了稀土前驱体、水热温度和水热时间的实验条件对NaGdF_(4):Yb^(3+),Er^(3+)纳米粉末上转换发光强度的影响;研究了氟源和钠源对NaGdF_(4):Yb^(3+),Er^(3+)晶体形貌和上转换发光强度的改善;同时,采用煅烧处理的方法,进一步探究样品的形貌和发光强度收到的影响。实验结果表明NH4F与NaOH作为氟源和钠源及200℃煅烧1 h得到的棒状结构NaGdF_(4):Yb^(3+),Er^(3+)的发光强度最好,色坐标(CIE)绿色发光强度从84%提升到94.88%。 展开更多
关键词 NaGdF_(4):Yb^(3+) er^(3+) 上转换发光 稀土氯化物 棒状结构 发光纯度
下载PDF
2.94μm LiNbO_(3)声光调Q Er:YAG激光输出脉冲特性 被引量:1
15
作者 王滔宁 姜玲玲 +2 位作者 程庭清 王礼 江海河 《物理学报》 SCIE EI CAS CSCD 北大核心 2024年第4期186-191,共6页
2.94μm纳秒铒激光是宽调谐中红外激光和临床医疗研究中重要的固体激光源.本文研制了新型LiNbO_(3)声光调Q Er:YAG激光器,研究了20 Hz重复频率下不同调Q延迟时间和耦合腔镜反射率对激光输出脉冲特性的影响规律.根据测量激光器的热透镜... 2.94μm纳秒铒激光是宽调谐中红外激光和临床医疗研究中重要的固体激光源.本文研制了新型LiNbO_(3)声光调Q Er:YAG激光器,研究了20 Hz重复频率下不同调Q延迟时间和耦合腔镜反射率对激光输出脉冲特性的影响规律.根据测量激光器的热透镜焦距设计了凹凸谐振腔补偿热透镜效应,获得了激光单脉冲能量为34.68 mJ、脉冲宽度为119.9 ns的调Q输出,相应的峰值功率为289.24 kW,与平平腔相比输出能量提高了2.09倍.据我们所知,这是目前声光调Q Er:YAG激光器中获得的最高能量,可为进一步研究宽调谐中红外激光技术提供新的手段. 展开更多
关键词 固体激光器 er:YAG LiNbO_(3)声光调Q开关
下载PDF
2.79μm高速转镜调Q Er,Cr:YSGG纳秒窄脉冲激光器
16
作者 朱永斌 马圣洁 +3 位作者 程庭清 王礼 陈月明 江海河 《光学精密工程》 EI CAS CSCD 北大核心 2024年第8期1122-1129,共8页
转镜调Q无插入损耗,是获得窄脉冲、高峰值功率输出激光的直接方式。纳秒脉冲需要使用高速转镜调Q,并精准控制电机转速与氙灯放电延时,以使激光介质上能级粒子数反转最大,获得最大激光能量输出。本文设计了以Arduino mega 2560单片机为... 转镜调Q无插入损耗,是获得窄脉冲、高峰值功率输出激光的直接方式。纳秒脉冲需要使用高速转镜调Q,并精准控制电机转速与氙灯放电延时,以使激光介质上能级粒子数反转最大,获得最大激光能量输出。本文设计了以Arduino mega 2560单片机为核心的高速转镜调Q控制系统,通过精确单片机解析串口屏指令控制激光电源的充放电和高速电机启停,同时通过对转镜脉冲信号整合降频控制氙灯放电时刻,实现对延迟时间的精准控制,实现了灯泵Er,Cr:YSGG激光纳秒窄脉冲调Q输出。在5 Hz重复频率下,转镜转速为650 r/s时,获得的最高单脉冲激光能量为45.7 mJ、脉冲宽度为86.2 ns,相应的峰值功率为530.2 kW。 展开更多
关键词 转镜调Q 固体激光器 er Cr:YSGG激光 ARDUINO 氙灯泵浦
下载PDF
基于石墨烯可饱和吸收体的Er∶YAG被动调Q激光器
17
作者 陈言 张沛雄 +3 位作者 权聪 孙敦陆 李真 陈振强 《人工晶体学报》 CAS 北大核心 2024年第7期1127-1135,共9页
本文研究了一种采用氙灯侧泵方式,并基于石墨烯可饱和吸收体的Er∶YAG被动调Q激光器。首先成功将石墨烯转移至Al_(2)O_(3)衬底制备得到石墨烯可饱和吸收体,并对其进行了形貌、结构及化学状态等性能表征。此外,对基于石墨烯可饱和吸收体... 本文研究了一种采用氙灯侧泵方式,并基于石墨烯可饱和吸收体的Er∶YAG被动调Q激光器。首先成功将石墨烯转移至Al_(2)O_(3)衬底制备得到石墨烯可饱和吸收体,并对其进行了形貌、结构及化学状态等性能表征。此外,对基于石墨烯可饱和吸收体的Er∶YAG被动调Q激光特性进行了研究,结果表明单脉冲能量从0.4 mJ增加至7 mJ,输出激光单脉冲宽度从761.2 ns下降至510 ns,最大峰值功率为13.7 kW。激光中心波长位于2935和2945 nm,且主波长在2935 nm处对应的半峰全宽(FWHM)为1.535 nm。沿x和y方向的光束质量因子分别为4.45和5.76。实验结果表明,该研究为推进更低成本、谐振腔设计简单且紧凑的2.94μm波段Er∶YAG激光器的发展提供了有效的参考依据。 展开更多
关键词 石墨烯可饱和吸收体 氙灯侧泵 被动调Q er∶YAG ~3μm激光
下载PDF
Critical Relation Path Aggregation-Based Industrial Control Component Exploitable Vulnerability Reasoning 被引量:1
18
作者 Zibo Wang Chaobin Huo +5 位作者 Yaofang Zhang Shengtao Cheng Yilu Chen Xiaojie Wei Chao Li Bailing Wang 《Computers, Materials & Continua》 SCIE EI 2023年第5期2957-2979,共23页
With the growing discovery of exposed vulnerabilities in the Industrial Control Components(ICCs),identification of the exploitable ones is urgent for Industrial Control System(ICS)administrators to proactively forecas... With the growing discovery of exposed vulnerabilities in the Industrial Control Components(ICCs),identification of the exploitable ones is urgent for Industrial Control System(ICS)administrators to proactively forecast potential threats.However,it is not a trivial task due to the complexity of the multi-source heterogeneous data and the lack of automatic analysis methods.To address these challenges,we propose an exploitability reasoning method based on the ICC-Vulnerability Knowledge Graph(KG)in which relation paths contain abundant potential evidence to support the reasoning.The reasoning task in this work refers to determining whether a specific relation is valid between an attacker entity and a possible exploitable vulnerability entity with the help of a collective of the critical paths.The proposed method consists of three primary building blocks:KG construction,relation path representation,and query relation reasoning.A security-oriented ontology combines exploit modeling,which provides a guideline for the integration of the scattered knowledge while constructing the KG.We emphasize the role of the aggregation of the attention mechanism in representation learning and ultimate reasoning.In order to acquire a high-quality representation,the entity and relation embeddings take advantage of their local structure and related semantics.Some critical paths are assigned corresponding attentive weights and then they are aggregated for the determination of the query relation validity.In particular,similarity calculation is introduced into a critical path selection algorithm,which improves search and reasoning performance.Meanwhile,the proposed algorithm avoids redundant paths between the given pairs of entities.Experimental results show that the proposed method outperforms the state-of-the-art ones in the aspects of embedding quality and query relation reasoning accuracy. 展开更多
关键词 Path-based reasoning representation learning attention mechanism vulnerability knowledge graph industrial control component
下载PDF
基于ERS信号蛋白异常表达探讨清肝降浊方治疗NAFLD的机制研究
19
作者 丁云录 薄天儒 +4 位作者 王铁成 李驰坤 李晓兵 欧喜燕 刘彦晶 《吉林中医药》 2024年第2期206-210,共5页
目的通过试验研究探讨清肝降浊方基于ERS信号蛋白异常表达治疗非酒精性脂肪肝病的作用机制。方法采用高脂饮食饲喂的方法,诱导建立非酒精性脂肪肝病大鼠动物模型。给药8周后,进行肝功能指标AST、ALT、AKP检测、血清中TC、TG、NEFA及肝... 目的通过试验研究探讨清肝降浊方基于ERS信号蛋白异常表达治疗非酒精性脂肪肝病的作用机制。方法采用高脂饮食饲喂的方法,诱导建立非酒精性脂肪肝病大鼠动物模型。给药8周后,进行肝功能指标AST、ALT、AKP检测、血清中TC、TG、NEFA及肝组织匀浆中TC、TG检测、肝组织匀浆中SOD、MDA检测,检测信号通路相关蛋白ATF4、eIF2a、CHOP的表达水平。结果清肝降浊方865.1 mg/kg、432.6 mg/kg和216.3 mg/kg给药组动物血清AST、ALT、AKP活性及肝组织中ATF4、CHOP表达量、TG含量均明显的低于模型组,而肝组织中SOD活性显著高于模型组(P<0.01或P<0.05);865.1 mg/kg和432.6 mg/kg 2个给药组动物血清TC、TG、NEFA含量及肝组织中TC、TG、MDA含量、eIF2a表达量均低于模型组(P<0.01或P<0.05)。结论清肝降浊方治疗NAFLD作用机制可能是通过调节ERS信号蛋白异常表达,从而达到防治非酒精性脂肪肝病。 展开更多
关键词 清肝降浊方 SD大鼠 NAFLD erS信号蛋白
下载PDF
Er∶YAG激光根尖切除断面形貌对牙周膜细胞生长的影响
20
作者 黄晓想 韩子萌 +2 位作者 于梦琪 罗小雨 侯本祥 《实用口腔医学杂志》 CAS CSCD 北大核心 2024年第6期787-792,共6页
目的:观察Er∶YAG激光根尖切除断面的形态对牙周膜细胞生长的影响。方法:将66颗离体单根前磨牙随机分为3组(n=22),在距离根尖3 mm处垂直于牙长轴切除根尖形成断面样本,A组使用高速涡轮金刚砂车针,B组使用超声骨刀,C组使用Er∶YAG激光。... 目的:观察Er∶YAG激光根尖切除断面的形态对牙周膜细胞生长的影响。方法:将66颗离体单根前磨牙随机分为3组(n=22),在距离根尖3 mm处垂直于牙长轴切除根尖形成断面样本,A组使用高速涡轮金刚砂车针,B组使用超声骨刀,C组使用Er∶YAG激光。SEM观察牙根断面残屑、玷污层、牙本质小管、裂隙等情况并测算粗糙度后,将牙周膜细胞接种于各组根片表面进行培养,分别于24、48、72 h时用CCK-8法检测样本表面细胞增殖情况。结果:A组操作时间显著短于B组和C组(P<0.01)。SEM观察显示,C组牙根断面几乎没有残屑、玷污层,可见牙本质小管,A组、B组可见碎屑及玷污层,A组未观察到牙本质小管。3组牙根断面均可见到裂隙,C组的裂隙数目较少。C组牙根断面粗糙度均值为(1487.13±295.90)nm,显著高于A组和B组(P<0.001)。CCK-8法显示,细胞接种于根面24、48、72 h后,各组的细胞数量(A值)均随培养时间的增加而增加,其中C组细胞增殖最明显,48 h和72 h时C组显著高于其他两组(P<0.05)。结论:Er∶YAG激光根尖切除断面形态比超声骨刀和高速涡轮金刚砂车针根尖切除更利于牙周膜细胞在其表面生长。 展开更多
关键词 er∶YAG激光 根尖切除术 扫描电镜 根尖外科手术
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部