Superior and safer lithium sulfur batteries realized by robust polysulfides-retarding dam with high flame retardance

The unparalleled energy density has granted lithium-sulfur batteries(LSBs)with attractive usages.Unfortunately,LSBs still face some unsurpassed challenges in industrialization,with polysulfides shuttling,dendrite growth and thermal hazard as the major problems triggering the cycling instability and low safety.With the merit of convenience,the method of designing functional separator has been adapted.Concretely,the carbon aerogel confined with CoS_(2)(CoS_(2)-NCA)is constructed and coated on Celgard separator surface,acquiring CoS_(2)-NCA modified separator(CoS_(2)-NCA@C),which holds the promoted electrolyte affinity and flame retardance.As revealed,CoS_(2)-NCA@C cell gives a high discharge capacity 1536.9 mAh/g at 1st cycle,much higher than that of Celgard cell(987.1 mAh/g).Moreover,the thermal runaway triggering time is dramatically prolonged by 777.4 min,corroborating the promoted thermal safety of cell.Noticeably,the higher coulombic efficiency stability and lower overpotential jointly confirm the efficacy of CoS_(2)-NCA@C in suppressing the lithium dendrite growth.Overall,this work can provide useful inspirations for designing functional separator,coping with the vexing issues of LSBs.

Deterioration Reason and Improvement Measure of the Retarding Effect of Protein Retarder on Phosphorus Building Gypsum

The retarding effect of protein retarder on phosphorus building gypsum(PBG)and desulfurization building gypsum(DBG)was investigated,and the results show that protein retarder for DBG can effectively prolong the setting time and displays a better retarding effect,but for PBG shows a poor retarding effect.Furthermore,the deterioration reason of the retarding effect of protein retarder on PBG was investigated by measuring the pH value and the retarder concentration of the liquid phase from vacuum filtration of PBG slurry at different hydration time,and the measure to improve the retarding effect of protein retarding on PBG was suggested.The pH value of PBG slurry(<5.0)is lower than that of DBG slurry(7.8-8.5).After hydration for 5 min,the concentration of retarder in liquid phase of DBG slurry gradually decreases,but in liquid phase of PBG slurry continually increases,which results in the worse retarding effect of protein retarder on PBG.The liquid phase pH value of PBG slurry can be adjusted higher by sodium silicate,which is beneficial to improvement in the retarding effect of the retarder.By adding 1.0%of sodium silicate,the initial setting time of PBG was efficiently prolonged from 17 to 210 min,but little effect on the absolute dry flexural strength was observed.

Experimental study on retarding mortar and its application in prestressed concrete

Based on a large number of orthogonal tests and theoretical analyses, the retarding mortar which meets the requirements of retard-bonded prestressed concrete was prepared. Initial setting time of the retarding mortar may vary from several hours to 15 d at 5 ℃-35 ℃ due to quantities and average curing temperature. And its 28 d compressive strength is above 35 MPa. Thus the influence of quantities on setting time and 28 d compressive strength, and the relationship between setting time and average curing temperature were investigated. The optimum quantities were obtained by studying the interaction of admixtures, and the retarding mechanism was discussed. Based on 52 retard-bonded prestressed strands by manual work from 24 retard-bonded prestressed concrete T-beams, static friction drag, change factor κ and friction factor μ were obtained from the test when retard-bonded prestressed strands were tensioned. Application of the retarding mortar will be vast in practical concrete projects.

Real-time flood forecasting of Huai River with flood diversion and retarding areas

A combination of the rainfall-runoff module of the Xin’anjiang model, the Muskingum routing method, the water stage simulating hydrologic method, the diffusion wave nonlinear water stage method, and the real-time error correction method is applied to the real-time flood forecasting and regulation of the Huai River with flood diversion and retarding areas. The Xin’anjiang model is used to forecast the flood discharge hydrograph of the upstream and tributary. The flood routing of the main channel and flood diversion areas is based on the Muskingum method. The water stage of the downstream boundary condition is calculated with the water stage simulating hydrologic method and the water stages of each cross section are calculated from downstream to upstream with the diffusion wave nonlinear water stage method. The input flood discharge hydrograph from the main channel to the flood diversion area is estimated with the fixed split ratio of the main channel discharge. The flood flow inside the flood retarding area is calculated as a reservoir with the water balance method. The faded-memory forgetting factor least square of error series is used as the real-time error correction method for forecasting discharge and water stage. As an example, the combined models were applied to flood forecasting and regulation of the upper reaches of the Huai River above Lutaizi during the 2007 flood season. The forecast achieves a high accuracy and the results show that the combined models provide a scientific way of flood forecasting and regulation for a complex watershed with flood diversion and retarding areas.

Combustion Properties of Textiles Applied in Tibet Ancient Buildings and Their Clean Flame Retarding Designs

In the Tibet ancient buildings, there are large amounts of combustible decorative textiles that pose great potential fire hazards. Some typical textile samples were collected from the Potala Palace. Their combustion properties were analyzed by UL 94 Vertical Burning test and Limiting Oxygen Index test. The effects of plateau climate on combustion properties, an important fact required to be considered in the flame retarding design for combustible textiles, were preliminarily compared via test data in the plain and those in the plateau. Based on the foregoing analyses, some thoughts were presented on the clean and feasible flame retarding means for the decorative textiles due to their special applications in Tibet, in ancient buildings and in plateau climate. The fire resistance, weather resistance, UV resistance, endurance, ornamentation and religious performances for these textiles must be taken into considerations comprehensively in the designs.

Synthesis of Antistatic Composite Based on Reaction Flame Retarding Unsaturated Polyester Resin

The synthesis of reaction flame retarding unsaturated polyester resin and the flame retarding mechanism are investigated.By taking the synthesis flame retarding unsaturated polyester resin as a base material,glass fibers as reinforced material,under the condition of adding graphite or carbon black respectively,the composites were manufactured.The flame retarding and antistatic properties are also studied.In the experiment,bromide-bearing flame retarding resin decomposed under a high temperature.Compound HBr was set out and retarded or stopped the flame.High concentration of HBr gas wall was formed between gas and solid phrases,which decreased flame.The results show that antistatic property of carbon black is higher than that of graphite.Adding a threshed value of 1% carbon black into composite,the antistatic property is at its highest value.

STUDY OF FLAME RETARDING FINISH OF POLYPROPYLENE / VISCOSE BLEND FABRICS

The combustion mechanisms of PP / Viscose blend fabrics are briefly discussed, and the factors affecting flame retarding(FR) effect are analyzed. Apart from this, the choice of processes of FR finish is also discussed in this paper. Other factors such as coating add-on, curing temperature and time are studied too. The results show that the factors above all have different extent of influence upon FR effect.

Multi-channel retarding field analyzer for EAST

A multi-channel retarding field analyzer（MC-RFA） including two RFA modules and two Langmuir probes to measure the ion and electron temperature profiles within the scrape-off layer was developed for investigations of the interplay between magnetic topology and plasma transport at the plasma boundary.The MC-RFA probe for the stellarator W7-X and first measurements at the tokamak EAST was designed.The probe head allows simultaneous multichannel ion temperature as well as for electron temperature measurements.The usability for radial correlation measurements of the measured ion currents is also given.

Investigation of the Ion Energy Transport in the Scrape-Off Layer on the J-TEXT Tokamak Using a Retarding Field Analyzer

Radial profiles of the ion temperature,Ti,have been measured by a double-sided retarding field analyzer（RFA） in the scrape-off layer（SOL） of the J-TEXT tokamak（R = 105 cm,r = 25-29 cm,Bt = 1.8-2.0 T,Ip = 120-180 kA,ne =（2-2.5） × 10^19 m^-3）.Strongly declining Ti profiles in the SOL have been found.The different e-folding lengths,At,of the Ti profiles in two experimental configurations with different magnetic connection lengths,Lc,reveal that a longer Lc results in weaker parallel energy transport and longer At.In similarity with the particle transport across the SOL,At is approximately proportional to the square root of Lc.Additionally,the poloidal asymmetry has been identified with enhanced ion energy transport across the SOL on the low-field side.

Preparation for Retarding and High Early Strength Concrete

The primary objective of this research was to determine optimum dosage of mixing concrete containing plasticizers and fly ash, consistent with desirable structural grade concrete properties. Factorial tests were also conducted to investigate the four main factors： water-cementing materials ratio, water content, content of superplasticizers （SP） and fly ash content. It was found that the requirement for setting time played the dominant role in shrinkage and anti-cracking, and fly ash played a critical role in workability and reducing heat of hydration but showed insignificant effects on slump, early strength and initial setting time of concrete.

THE SLUMP RETENTION OF N-2000 HIGH-RANGE WATER-REDUCING AND RETARDING ADMIXTURE

N-2000 is an admixture for concrete, with a low slump loss, high range water-reducing ratio and long-time retarding. The N-2000 is made up of naphthalene-sulfonic-maldehyde polycondensation (NSMP) and ATMP. Its characteristic results from the synergistic effects of NSMP and ATMP. The results show that when 0.7%-1.2% of N-2000 is added to concrete (by mass of cement), the water reducing ratio is up to 20%-30%, and the slump of fresh concrete can be retained for 2 hours without significant loss. N-2000 can not only improve the workability of fresh concrete but also increase the strength of the hardened concrete, especially early strength. It is also proved to have a good compatibility with various cements.

Analysis of the Anomalous Phenomenon in the Retarding Potential Analyzer Measurements

An anomalous phenomenon was observed in the retarding potential analyzer （RPA） measurements of the energy of the ion beam from an 8 cm argon ion source. The current-voltage （Ⅰ- Ⅴ） curve, which should theoretically descend, went up as the ion retarding potential was increased. Various explanations, such as the Townsend discharge theory and secondary electron emission etc. were proposed but denied by the theory application condition or the experiment results. An angle of about -10° was found between the axes of the ion beam and the RPA according to the contours of the ion beam density and direction. The particle simulation and experiment of the sum of the collector and wall current were conducted at different incident ion angles. The trends of the Ⅰ- Ⅴ curve in simulation results conformed with the experimental results in most cases. The ion trajectories were simulated at different retarding potentials with an incident angle of -10°. According ：to these results, the reason for the anomalous phenomenon is that when there is a specific angle between the axes of the ion beam and the RPA, more ions are repelled from the vicinity of the ion retarding grid to avoid striking on the grid as the ion retarding potential increases. These redundant ions reach the plate and thus lead to the formation of an ascending Ⅰ- Ⅴ curve.

Flame-retarding battery cathode materials based on reversible multi-electron redox chemistry of phenothiazine-based polymer

Polymeric organic battery materials are promising alternatives to the transition-metal-based ones owing to their enriched chemistries. However, the flammability of organic compounds brings in serious concern on battery safety. In addition to use flame-retarding electrolyte/electrolyte additives or battery separators,flame retardancy can readily be achieved through the integration of flame-retarding unit into the polymer backbone, imparting the flame retardancy permanently. The as-designed polymer based on phenothiazine shows significantly shortened self-extinguished time without deteriorating its intrinsic thermodynamic and electrochemical properties. Moreover, two electron per phenothiazine molecule is realized for the first time in a highly reversible manner with discharge voltages of 3.52 V and 4.16 V versus Li+/Li and an average capacity of ca. 120 mAh g-1 at a current rate of 2 C. The origin of the reversibility is investigated through density functional theory(DFT) calculations. These findings address the importance of molecular design for safer and more stable organic materials for batteries.

Mechanism Study on the Effect of Retarder on Polyurethane Setting Time Based on Molecular Simulation

This study identified castor oil and phosphate ester as effective retarders through setting time,tensile,and flexural tests,and determined their optimal dosages.The mechanism by which phosphate ester affects the setting time of polyurethane was further investigated using molecular dynamics simulations.Fourier transform infrared spectroscopy was also employed to systematically study the physical and chemical interactions between phosphate esters and polyurethane materials.The results demonstrate that a 1%concentration of phosphate ester provides the most effective retarding effect with minimal impact on the strength of polyurethane.When phosphate ester is added to the B component of the two-component polyurethane system,its interaction energy with component A decreases,as do the diffusion coefficient and aggregation degree of component B on the surface of component A.This reduction in interaction slows the setting time.Additionally,the addition of phosphate ester to polyurethane leads to the disappearance or weakening of functional groups,indicating competitive interactions within the phosphate ester components that inhibit the reaction rate.

Sulfolane‑Based Flame‑Retardant Electrolyte for High‑Voltage Sodium‑Ion Batteries

Sodium-ion batteries hold great promise as next-generation energy storage systems.However,the high instability of the electrode/electrolyte interphase during cycling has seriously hindered the development of SIBs.In particular,an unstable cathode–electrolyte interphase(CEI)leads to successive electrolyte side reactions,transition metal leaching and rapid capacity decay,which tends to be exacerbated under high-voltage conditions.Therefore,constructing dense and stable CEIs are crucial for high-performance SIBs.This work reports localized high-concentration electrolyte by incorporating a highly oxidation-resistant sulfolane solvent with non-solvent diluent 1H,1H,5H-octafluoropentyl-1,1,2,2-tetrafluoroethyl ether,which exhibited excellent oxidative stability and was able to form thin,dense and homogeneous CEI.The excellent CEI enabled the O3-type layered oxide cathode NaNi_(1/3)Mn_(1/3)Fe_(1/3)O_(2)(NaNMF)to achieve stable cycling,with a capacity retention of 79.48%after 300 cycles at 1 C and 81.15%after 400 cycles at 2 C with a high charging voltage of 4.2 V.In addition,its nonflammable nature enhances the safety of SIBs.This work provides a viable pathway for the application of sulfolane-based electrolytes on SIBs and the design of next-generation high-voltage electrolytes.

Flexible and flame-retarding phosphorylated MXene/polypropylene composites for efficient electromagnetic interference shielding

Flame-retardant composites with high electromagnetic interference(EMI)shielding performance are desirable for electronic device packaging.Despite great potential of MXene for high EMI,it still remains a great challenge to develop high-performance flame-retardant polymer/MXene composites with excellent EMI shielding effectiveness because of the poor oxidative stability of MXene.Herein,phosphorylated MXene/polypropylene(PP)composites are prepared by coating phosphorylated MXene on PP fabric followed by spraying polyethylenimine(PEI)and hot-pressing.The phosphorylated MXene proves to be more durable against oxidation than pure MXene due to the protection effect of polyphosphates.Upon hot-pressing,melted PP fibers are fused together at their contact points and thus as-prepared composites are bi-continuous with two interpenetrating phases.The composites show significantly improved thermal stability and flame retardancy relative to pure PP,with a low total heat release(THR)of 3.7 kJ/g and a heat release rate(HRR)of 50.0 W/g,which are reduced by 78%and 87%,respectively.In addition,the composites exhibit a high electrical conductivity of~36,700 S/m and an EMI shielding performance of~90 d B over the whole frequency range of 8–12 GHz with a thickness of~400μm.The as-developed PP/MXene composites hold great promise for reliable protection of next-generation electronic devices working in complex environments.

Flame-Retarding Epoxy Resin Films by Curing with Organophosphorus Containing Diamine

An organophosphorus-based diamine has been synthesized and used as a curing and flame retarding bifunctional agent for epoxy resins.This phosphorodiamidate functions not only as a crosslinking materials in the Epon 828 epoxy resin curing process but also as a fire retarding compound to produce thin films or composites upon curing.This phosphorus-containing reactive amine was synthesized via condensation of phenyphosphonic dichloride with ethylenediamine in the presence of sodium methoxide.The product was then purified and later characterized by NMR and FTIR spectroscopy as well as MALDI-TOF mass spectrometry.Kinetics studies of the curing reaction of the phosphorodiamidate were carried out in comparison with the non-phosphorus containing ethylenediamine reference crosslinking agent.Thermal stability of the cured epoxy ware investigated by thermogravimetric analysis(TGA)and differential scanning calorimetry(DSC).Moreover,flame retardant properties of the obtained materials was investigated by limiting oxygen index(LOI)measurements as well as the UL-40 method.The obtained results show that epoxy resin cured with phosphorodiamidate possesses higher thermostability compared to the epoxy cured with the regular ethylenediamine counterpart.This is evident by higher amount of char formed upon burning.More importantly,the LOI value of 27 was observed in the phosphorodiamidate-cured epoxy resin compared with LOI of 20 of the epoxy resin cured with ethylenediamine where no phosphorus was present.The UL-94 highest rating of V-0 materials was obtained with only about 2-3 wt%of the phosphorus element.The chemistry,curing kinetics,and thermal properties of these new epoxy formulations are discussed.

Atom-economic synthesis of an oligomeric P/N-containing fire retardant towards fire-retarding and mechanically robust polylactide biocomposites

Renewable and biodegradable polylactide (PLA) has excellent mechanical strength but is highly flammable which restricts its practical applications. Many phosphorus/nitrogen (P/N)-based flame retardants are ef- fective in PLA, but their high addition loading usually decreases the mechanical strength of the PLA bulk. For polyphosphoramides, despite high fire-retardant efficiency, their chemical synthesis often generates chemical wastes as byproducts. Herein, we report an atom-economic and highly efficient oligomeric P/N fire retardant (APN) prepared using a mild Michael addition polymerization with no byproducts. Using only 3 wt% APN, the resulting PLA exhibits desired fire retardancy including a UL-94 V-0 rating and a limiting oxygen index of 37.6%. Furthermore, the toughness of the fire-retardant PLA increases by 85% compared to pure PLA, with both tensile strength and thermal stability preserved. This work offers an atom-economic strategy for synthesizing highly efficient P/N fire retardants for use in the creation of fire-resistant PLA with robust mechanical properties.

Effect of the Retarder on Initial Hydration and Mechanical Properties of the"one-step"Alkaliactivated Composite Cementitious Materials

This paper studied the effects of different retarders on the performance of the"one-step"alkali-activated composite cementitious material(ACCM)which is composed of ground granulated blast slag(GGBS)and fly ash(FA),and analyzed its mechanical properties,hydration mechanism,and retardation mechanism.The effects of retarders on the hydration products,mechanical properties,and hydration kinetics of ACCM were investigated using XRD,SEM,FTIR,EDS,and thermoactive microcalorimetry.The results showed that Na_(2)B_(4)O_(7)·10H_(2)O(B)delayed the exotherm during the alkali activation process and could effectively delay the setting time of ACCM,but the mechanical properties were slightly decreased.The setting time of ACCM increased with the increase in SG content,but the mechanical properties of ACCM decreased with the increase in SG content.C1_(2)H_(22)O_(11)(CHO)could effectively delay the hydration reaction of ACCM and weakly enhanced the compressive strength.H_(3)PO_(4)(HP)at a concentration of 0.05 mol/L had a certain effect on ACCM retardation,but HP at a concentration of 0.07 and 0.09 mol/L had an effect of promoting the setting and hardening time of ACCM.