Grain yield and nitrogen use efficiency of an ultrashort-duration variety grown under different nitrogen and seeding rates in direct-seeded and double-season rice in Central China

Nitrogen(N) and seeding rates are important factors affecting grain yield and N use efficiency(NUE) in directseeded rice. However, these factors have not been adequately investigated on direct-seeded and double-season rice(DDR) in Central China. The objective of this study was to evaluate the effects of various N and seeding rates on the grain yield and NUE of an ultrashort-duration variety grown under DDR. Field experiments were conducted in 2018 in Wuxue County and 2019 in Qichun County, Hubei Province, China with four N rates and three seeding rates.The results showed that the grain yield of the ultrashort-duration variety ranged from 6.32 to 8.23 t ha–1with a total growth duration of 85 to 97 days across all treatments with N application. Grain yield was increased significantly by N application in most cases, but seeding rate had an inconsistent effect on grain yield. Furthermore, the response of grain yield to the N rates was much higher than the response to seeding rates. The moderate N rates of 100–150 and 70–120 kg N ha–1in the early and late seasons, respectively, could fully express the yield potential of the ultrashort-duration variety grown under DDR. Remarkably higher N responses and agronomic NUE levels were achieved in the early-season rice compared with the late-season rice due to the difference in indigenous soil N supply capacity(INS) between the two seasons. Seasonal differences in INS and N response should be considered when crop management practices are optimized for achieving high grain yield and NUE in ultrashort-duration variety grown under DDR.

Continuous changes in electrical conductivity of sodium aluminate solution in seeded precipitation

The mechanism of seeded precipitation of sodium aluminate solution was studied by measuring the seeded-precipitation rate and electrical conductivity online, as well as calculating the activity and fraction of ion pair. The results show that the electrical conductivity of sodium aluminate slurry linearly decreases with increasing aluminum hydroxide addition. Moreover, both the electrical conductivity of slurry and the difference in electrical conductivity between sodium aluminate solution and slurry remarkably decline in the first 60 min before gradually increasing in the preliminary 10 h and finally reaching almost the same level after 10 h. In low Na2 O concentration solution the activities of Na OH and Na Al（OH）4 in seeded precipitation are high, which can enlarge the difference in conductivity between slurry and solution. Additionally, more ion pairs exist in solution in preliminary seeded precipitation, and the adsorption of Na＋Al（OH）4- on seed surface is likely to break the equilibrium of ion pair formation and to decrease the difference in conductivity in preliminary seeded precipitation.

Variation of soda content in fine alumina trihydrate by seeded precipitation

High soda content in fine alumina trihydrate（ATH） limits its application and increases the soda consumption. The variation of soda content in the fine ATH by seeded precipitation was determined by detection of electric conductivity of solution, soda content in ATH, measurement of particle size distribution and microscopic analysis. The results show that high concentration of sodium aluminate solution, ground circulative seed, low temperature or fast initial precipitation rate increases the soda content in ATH. Soda mainly exists in lattice soda and less soda in desilication product （DSP） exists in the fine ATH precipitated from sodium aluminate solution with concentration of Al2O3 （ρAl2O3） more than 160 g/L and mass ratio of alumina to silica （μSiO2） of 400, and lattice soda decreases with increasing initial precipitation temperature, aging seed, and low precipitation rate and precipitation time. Results also imply that -＋ 4）Na Al（OH ion-pair influences lattice soda content in ATH on the basis of electric conductivity variation.

Control Efficiency and Crop Safety of 20% Cyhalofop-butyl WP on Grass Weeds in Direct Seeded Rice Fields

The purpose was to define the control efficiency and safety of 20% cy- halofop-butyl WP on grass weeds in direct seeded rice fields, in order to provide the basis for chemical weeding. This study measured Leptochloa chinensis（L.） Nees, Echinoch/oa crusgalli （L.） Beauv and other gramineous weed control efficiency with four concentrations of 20% cyhalofop-dutyl WP and 100 g/L cyhalofop-dutyl EC in direct seeded rice fields, and analyzed the yield-increasing effect and safety of rice. The results showed that 20% cyhalofop-butyl WP had a good control efficiency on grass weeds such as Leptochloa chinensis（L.） Nees, Echinoch/oa crusgalli（L.） Beauv and other grasses. The effective dosage of 90-150 g/hm2 was over 90.7% on Lep- foch/oa chinensis（L.） Nees and the comprehensive control effect of the grass weeds was above 86.7%, which was basically consistent with 100 g/L cyhalofop-dutyl EC. Furthermore, 20% cyhalofop-dutyl WP was high security for direct seeded rice fields. The yield of rice was increased by 10.18%-11.22% after spraying herbicide. There- fore, 20% of cyhalofop-dutyl WP can be used as a special herbicide for controlling Leptochloa chinensis（L.） Beauv in direct seeded rice fields, and has a good applica- tion prospect.

Prevention Effects of Pyrazosulfuron-ethyl·Quinclorac 50% WP on Stem and Leaf of Dry Direct Seeded Rice

[Objective] The aim was to explore the prevention effects of pyrazosul-furon-ethyl·quinclorac 50% WP on stem and leaf of dry direct seeded rice. [Method] Totaling 7 drug doses were set in the test and the effects were observed 5, 10, 15 and 30 d after drug application, with the remained weeds surveyed 15 and 30 d after drug application. [Result] The test showed pyrazosulfuron-ethyl·quinclorac 50%WP was safe to rice as treatment agent of stem and leaf, and rice yield increased dramatical y, with the growth rate in 2.1%-49.3%. After the drug application, the prevention effects on Echinochloa crusgal i, Ludwimlia prostrata, Monochoria vamli-nalis, and Zong grass were 92.2%, 96.6%, 93.5%, and 94.8%, and the effects on fresh weight were 94.8%, 97.1%, 93.3% and 94.9%, respectively. [Conclusion] Pyra-zosulfuron-ethyl·quinclorac 50% WP can be taken as treatment agents of stem and leaf of dry direct seeded rice.

Correlation of Leaf and Root Senescence During Ripening in Dry Seeded and Transplanted Rice

Dry seeding is a resource-saving rice establishment method. With an equivalent yield, dry seeded flooded rice （DSR） has been considered as a replacement for traditional transplanted flooded rice （TFR）. However, the differences in leaf and root senescence during grain filling between DSR and TFR were seldom identified. In this study, the root length, root tip number and leaf senescence of rice varieties Huanghuazhan and Yangliangyou 6 during ripening were compared between DSR and TFR. Results showed that top three leaves in DSR had the characteristics of relatively lower SPAD value, lower N content and premature leaf senescence. In addition, both the total root length and total root tip number of DSR were significantly lower than those of TFR. In conclusion, premature and quick leaf senescence was related with inadequate root length and root tip number during ripening, which might result from the deficiency of nitrogen supply in DSR. Techniques on improving leaf nitrogen status and delaying the leaf senescence during grain-filling in DSR should be developed in future researches.

Performance of Different Cultivars in Direct Seeded Rice (<i>Oryza sativa</i>L.) with Various Seeding Densities

Optimum seeding density is necessary to achieve the production potential of a cultivar in all crops. To investigate the performance of different cultivars in direct seeded rice in response to various seeding densities, a field experiment was conducted at Agronomic Research Area, University of Agriculture, Faisalabad during the kharif 2012. Super basmati (fine rice) and KSK-133 (coarse rice) were sown using seeding densities of 30, 45, 60 and 75 kg&middotha-1. Results indicated that leaf area index and crop growth rate varied among rice cultivars as well as various seeding densities. The growth of rice at seeding density of 75 kg&middotha-1 was higher than rest of treatments. The response of rice yield and its components like number of productive tillers, number of kernels per panicle and 1000-kernal weight differed significantly under the influence of cultivars and various seeding densities. Seeding density of 75 kg&middotha-1 remained superior for both rice cultivars regarding final yield. This treatment furnished kernel yields of 3.83 and 5.49 t&middotha-1 in fine and coarse rice, respectively which were significantly higher than other treatments. However, Kernel quality was improved in terms of lower number of sterile and chalky kernels at lower seeding densities (30 kg&middotha-1). Based on these findings, it is concluded that using seeding density of 75 kg&middotha-1 for direct seeded fine and coarse rice cultivars is beneficial in terms of better growth and higher yield but kernel quality is reduced by increasing the seeding density.

Influence of Seed Priming on Performance and Water Productivity of Direct Seeded Rice in Alternating Wetting and Drying

Direct seeded rice is promising alternative to traditional transplanting, but requires appropriate crop and water management to maintain yield performance and achieve high water productivity. Present study evaluated the effect of seed priming and irrigation on crop establishment, tillering, agronomic traits, paddy yield, grain quality and water productivity of direct seeded rice in alternate wetting and drying （DSR-AWD） in comparison with direct seeded rice at field capacity （DSR- FC）. Seed priming treatments were osmo-priming with KCI （2.2%）, CaCI2 （2.2%） and moringa leaf extracts （MLE, 3.3%） including hydro-priming as control. Among the treatments, seed osmo-primed with MLE emerged earlier and had higher final emergence, followed by osmo-priming with CaCI2. Tillering emergence rate and number of tillers per plant were the highest for seed priming with CaCI2 in DSR- AWD. Total productive and non-productive tillers, panicle length, biological and grain yields, harvest index were highest for seed priming with MLE or CaCI2 in DSR-AWD. Similarly, grain quality, estimated in terms of normal grains, abortive and chalky grains, was also the highest in DSR-AWD with MLE osmo-priming. Benefit cost ratio and water productivity was also the highest in DSR-AWD for seed priming with MLE. In conclusion, seed priming with MLE or CaCI2 can be successfully employed to improve the direct seeded rice performance when practiced with alternate wetting and drying irrigation.

Model of apparent crystal growth rate and kinetics of seeded precipitation from sodium aluminate solution

Based on the population balance equation in a batch crystallizer characteristic of seeded precipitation, a model to calculate the rate of apparent crystal growth of aluminum hydroxide from the size distribution was deve- loped. The simulation results indicate that the rate of apparent crystal growth during seeded precipitation exhibits a manifest dependence on the crystal size. In general, there is an obvious increase in the apparent crystal growth rate with the augment in crystal size. The apparent activation energy increases with the increase of characteristic crystal size, which indicates that the growth of small crystals is controlled by surface chemical reaction; it is gradually controlled by both the surface reaction and diffusion with the augment in crystal size.

Steganography Using Reversible Texture Synthesis Based on Seeded Region Growing and LSB

Steganography technology has been widely used in data transmission with secret information.However,the existing steganography has the disadvantages of low hidden information capacity,poor visual effect of cover images,and is hard to guarantee security.To solve these problems,steganography using reversible texture synthesis based on seeded region growing and LSB is proposed.Secret information is embedded in the process of synthesizing texture image from the existing natural texture.Firstly,we refine the visual effect.Abnormality of synthetic texture cannot be fully prevented if no approach of controlling visual effect is applied in the process of generating synthetic texture.We use seeded region growing algorithm to ensure texture’s similar local appearance.Secondly,the size and capacity of image can be decreased by introducing the information segmentation,because the capacity of the secret information is proportional to the size of the synthetic texture.Thirdly,enhanced security is also a contribution in this research,because our method does not need to transmit parameters for secret information extraction.LSB is used to embed these parameters in the synthetic texture.

Effects of Na_4EDTA and EDTA on seeded precipitation of sodium aluminate solution

Na4EDTA and EDTA were adopted as new additives to intensify the seeded precipitation process of sodium aluminate solution. The effects of the two additives at certain concentrations on the seeded precipitation rate of sodium aluminate solution, particle size distribution (PSD) and morphology of precipitated gibbsite were investigated using titration method, particle size analyzer and scanning electron microscope (SEM), respectively. The results show that the two additives can accelerate the seeded precipitation rate of sodium aluminate solution. At relatively high concentration, the facilitative effect of EDTA on sodium aluminate solution is more obvious than that of Na4EDTA. EDTA makes gibbsite particles thinner than Na4EDTA. The Na+ and H+ result in the different effects on the seeded precipitation rate of sodium aluminate solution in spite of the same EDTA anion in the two additives.

Preparation of sulphonate-containing core/shell latex particles via seeded emulsion copolymerization

In this study, P（St-MAA） seed latex particles were first prepared via soap-free emulsion polymerization of styrene （St） and methacrylic acid （MAA）, then the seed particles were allowed to swell with St at room temperature, and the P（St-MAA）/P（St- NaSS） core/shell latex particles were then synthesized via seeded emulsion copolymerization of St and sodium styrene sulphonate （NaSS） using AIBN as initiator in the presence of N,N^-methylenebisacrylamide （BAA, water-soluble crosslinker）. Results showed that the polymerization could be carried out smoothly when the ratio of BAA to total monomers was less than 3 mol%, the narrow dispersed P（St-MAA） seed particles with the diameter of 150 nm and the P（St-MAA）/P（St-NaSS） core/shell latexes with the particle size of about 200 nm were synthesized. When the 25/75 mole ratio of NaSS/（St ＋ MAA） and 2 tool% of BAA were used in the seeded emulsion polymerization, the resulted P（St-MAA）/P（St-NaSS） latex product showed a low weight loss after water extraction, and the NaSS unit content in the whole particle and in the shell reached 11.7 mol% and 34.6 mol%, resoectivelv.

Texture feature based automated seeded region growing in abdominal MRI segmentation

A new texture feature-based seeded region growing algorithm is proposed for automated segmentation of organs in abdominal MR images. 2D Co-occurrence texture feature, Gabor texture feature, and both 2D and 3D Semi- variogram texture features are extracted from the image and a seeded region growing algorithm is run on these feature spaces. With a given Region of Interest (ROI), a seed point is automatically se-lected based on three homogeneity criteria. A threshold is then obtained by taking a lower value just before the one causing ‘explosion’. This algorithm is tested on 12 series of 3D ab-dominal MR images.

Fabrication of seeded substrates for layer transferrable silicon films

The layer transfer process is one of the most promising methods for low-cost and highly-efficient solar cells, in which transferrable mono-crystalline silicon thin wafers or films can be produced directly from gaseous feed-stocks. In this work, we show an approach to preparing seeded substrates for layer-transferrable silicon films. The commercial silicon wafers are used as mother substrates, on which periodically patterned silicon rod arrays are fabricated, and all of the surfaces of the wafers and rods are sheathed by thermal silicon oxide. Thermal evaporated aluminum film is used to fill the gaps between the rods and as the stiff mask, while polymethyl methacrylate （PMMA） and photoresist are used as the soft mask to seal the gap between the filled aluminum and the rods. Under the joint resist of the stiff and soft masks, the oxide on the rod head is selectively removed by wet etching and the seed site is formed on the rod head. The seeded substrate is obtained after the removal of the masks. This joint mask technique will promote the endeavor of the exploration of mechanically stable, unlimitedly reusable substrates for the kerfless technology.

Synthesis of crosslinked polystyrene particles by seeded batch polymerization with monomer absorption

A highly crosslinked, monodispersed polystyrene（PS） particle was prepared by a seeded batch dispersion polymerization with a monomer absorption method. Prior to polymerization, 1,9 lam monodispersed PS seed particles were treated under an optimum condition of monomer absorption. The effects of divinylbenzebe（DVB） concentration and polymerization temperature were examined for styrene（in PS seed）/styrene（in the second stage） mass ratio of 1：1 in the medium range of EtOH/water mass ratio of 100/0-80/20 and 2.3 μm uniform crosslinked PS particles containing 15%-20% （mass fraction） DVB were prepared at 60-70 ℃. The results show that monomer absorption before the second stage of polymerization is more effective to prepare highly crosslinked monodispersed PS particles.

Vertical Bridgman Seeded Growth of Cd_(1-x)Zn_xTe Crystals

The method of vertical Bridgman seeded growth of Cdi.Zn.Te crystals was studied. This method ispromising in obtaining large size single crystals and improving the crystal structure. However, some prob-lems such as seeded growth failurc exist at present.(111)-oriented Cd_(0.96)Zn_(0.04)Te single crystal substrateswith size greater than 15×15 mm￣2 arc obtained. The FWHM ranges from 18 to 66 arc.sec and theresistivity is greater than 10￣6 obmem.

Picosecond supercontinuum generation seeded by a weak continuous wave

We experimentally investigate the spectral details of a picosecond supercontinuum pumped at 1064 nm and seeded by a weak continuous wave （～20000 times weaker than the pulse peak power） at several power levels in photonic crystal fibers. Seeding at different wavelengths leads to different spectral details and the effects to the bandwidth of supercontinuum are also distinct. Spectra can be widened when seeded by a continuous wave at 1070 nm and narrowed by ～100 nm when seeded at 1080 nm. The influence is enhanced by increasing the average seeded power.

The 5.2 kW Nd：YAG Slab Amplifier Chain Seeded by Nd：YVO4 Innoslab Laser

A high power Nd：YAG end-pumped slab amplifier chain with a Nd：YVO4 innoslab laser as the master oscillator is demonstrated. A chain output power of 5210 W with beam quality of 4 times the diffraction limit is achieved by double-passing the first amplifier stage and single-passing the second stage with an optical efficiency of 29% while working at a frequency of 1kHz and pulse width of 200 μs.

Economics of Residues Incorporation and Phosphorus Application for Direct Seeded Rice and Wheat under Saline Soil

Two-year long field study was conducted using a permanent layout to investigate the economics of crop residues incorporation (2 t&middotha-1) and P application (0, 40, 80 and 120 kg P2O5 ha-1) to directly sowing of rice and wheat crops gown under naturally salt-affected calcareous soil (ECe = 4.59 dS m-1;pHs = 8.38;SAR = 6.57 (mmolc L-1)1/2;CaCO3 = 3.21%;Extractable P = 4.07 mg&middotkg-1;sandy clay loam) at farmers field in district Hafizabad during the year 2012-13. Split plot design (crop residues in main plots and P application in sub plots) was followed with three replications. Agronomic data on growth and yield were collected at the time of each crop maturity. Maximum growth and yield of both the crops were harvested from the plots where P2O5 was applied @ 80 kg&middotha-1 along with crop residues incorporation. On an average of two years, maximum paddy (3.26 t&middotha-1) and wheat grain (3.56 t&middotha-1) yield were produced with P application @ 80 kg P2O5 ha-1 along with crop residues incorporation. Although, the yield harvested with this treatment (80 kg P2O5 ha-1 + crop residues) performed statistically equal to 120 kg P2O5 ha-1 without crop residues incorporation during both the years, however, on an average of two years, grain yield of directly sowing rice and subsequent wheat was significantly superior (22% and 24% respectively) than that of higher P rate (120 kg&middotha-1) without crop residues. Overall, continuous two-year crop residues incorporation further increased (17%) paddy yields during the follow up year of crop harvest. Economic analyses of both the crops were carried out to choose the best treatment with adequate economic benefits as compared to those without crop residue incorporation. Maximum net benefit of Rs = 108,680/- for direct seeded rice and Rs = 99,362/- for wheat grown with 80 kg P2O5 ha-1 application under crop residues incorporation was determined. Among P application treatments without crop residues incorporation, the maximum net benefit (Rs = 75,874/- and Rs = 65,725/-) and highest residual values (49,809 and 39,160) for direct seeded rice and wheat respectively, were obtained with extended P application rate (120 kg P2O5 ha-1) which was not again as much as that of 80 kg P2O5 ha-1 application with crop residues incorporation.

IVC RECONSTRUCTION OF THE DOGS WITH DACRON SEEDED WITH AUTOLOGOUS VENOUS FRAGMENTS

ＩＶＣＲＥＣＯＮＳＴＲＵＣＴＩＯＮＯＦＴＨＥＤＯＧＳＷＩＴＨＤＡＣＲＯＮＳＥＥＤＥＤＷＩＴＨＡＵＴＯＬＯＧＯＵＳＶＥＮＯＵＳＦＲＡＧＭＥＮＴＳＩＶＣＲＥＣＯＮＳＴＲＵＣＴＩＯＮＯＦＴＨＥＤＯＧＳＷＩＴＨＤＡＣＲＯＮＳＥＥＤＥＤＷＩＴＨＡＵＴＯＬＯＧＯ...