Deep tectonics and seismogenic mechanisms of the seismic source zone of the Jishishan M_(s)6.2 earthquake on December 18,2023,at the northeast margin of the Tibetan Plateau

On December 18,2023,an M_(s)6.2 earthquake occurred in Jishishan,Gansu Province,China.This earthquake happened in the eastern region of the Qilian Orogenic Belt,which is situated at the forefront of the NE margin of the Tibetan Plateau(i.e.,Qinghai-Tibet Plateau),encompassing a rhombic-shaped area that intersects the Qilian-Qaidam Basin,Alxa Block,Ordos Block,and South China Block.In this study,we analyzed the deep tectonic pattern of the Jishishan earthquake by incorporating data on the crustal thickness,velocity structure,global navigation satellite system(GNSS)strain field,and anisotropy.We discovered that the location of the earthquake was related to changes in the crustal structure.The results showed that the Jishishan M_(s)6.2 earthquake occurred in a unique position,with rapid changes in the crustal thickness,Vp/Vs,phase velocity,and S-wave velocity.The epicenter of the earthquake was situated at the transition zone between high and low velocities and was in proximity to a low-velocity region.Additionally,the source area is flanked by two high-velocity anomalies from the east and west.The principal compressive strain orientation near the Lajishan Fault is primarily in the NNE and NE directions,which align with the principal compressive stress direction in this region.In some areas of the Lajishan Fault,the principal compressive strain orientations show the NNW direction,consistent with the direction of the upper crustal fast-wave polarization from local earthquakes and the phase velocity azimuthal anisotropy.These features underscore the relationship between the occurrence of the Jishishan M_(s)6.2 earthquake and the deep inhomogeneous structure and deep tectonic characteristics.The NE margin of the Tibetan Plateau was thickened by crustal extension in the process of northeastward expansion,and the middle and lower crustal materials underwent structural deformation and may have been filled with salt-containing fluids during the extension process.The presence of this weak layer makes it easier for strong earthquakes to occur through the release of overlying rigid crustal stresses.However,it is unlikely that an earthquake of comparable or larger magnitude would occur in the short term(e.g.,in one year)at the Jishishan east margin fault.

Study on the Physical Process and Seismogenic Mechanism of the Yangbi MS 6.4 Earthquake in Dali,Yunnan Province

The Ms 6.4 earthquake occurred on May 21,2021 in Yangbi County,Dali Prefecture,Yunnan Province,which was the largest earthquake after the 2014 Jinggu Ms 6.6 earthquake,in western Yunnan.After the earthquake,the rapid field investigation and earthquake relocation reveal that there was no obvious surface rupture and the earthquake did not occur on pre-existing active fault,but on a buried fault on the west side of Weixi–Qiaohou–Weishan fault zone in the eastern boundary of Baoshan sub-block.Significant foreshocks appeared three days before the earthquake.These phenomena aroused scholars'intensive attention.What the physical process and seismogenic mechanism of the Yangbi Ms 6.4 earthquake are revealed by the foreshocks and aftershocks?These scientific questions need to be solved urgently.

Earthquake relocation using a 3D velocity model and implications on seismogenic faults in the Beijing-Tianjin-Hebei region

To enhance the understanding of the geometry and characteristics of seismogenic faults in the Beijing-Tianjin-Hebei region,we relocated 14805 out of 16063 earthquakes(113°E-120°E,36°N-43°N)that occurred between January 2008 and December 2020 using the double-difference tomography method.Based on the spatial variation in seismicity after relocation,the Beijing-Tianjin-Hebei region can be divided into three seismic zones:Xingtai-Wen'an,Zhangbei-Ninghexi,and Tangshan.(1)The Xingtai-Wen'an Seismic Zone has a northeastsouthwest strike.The depth profile of earthquakes perpendicular to the strike reveals three northeast-striking,southeast-dipping,high-angle deep faults(>10 km depth),including one below the shallow(<10 km depth)listric,northwest-dipping Xinghe fault in the Xingtai region.Two additional deep faults in the Wen'an region are suggested to be associated with the 2006 M 5.1 Wen'an Earthquake and the 1967 M 6.3 Dacheng earthquake;(2)The Zhangbei-Ninghexi Seismic Zone is oriented north-northwest.Multiple northeast-striking faults(10-20 km depth),inferred from the earthquake-intensive zones,exist beneath the shallow(<10 km depth)Xiandian Fault,Xiaotangshan Fault,Huailai-Zhuolu Basin North Fault,Yangyuan Basin Fault and Yanggao Basin North Fault;(3)In the Tangshan Seismic Zone,earthquakes are mainly concentrated near the northeast-striking Tangshan-Guye Fault,Lulong Fault,and northwest-striking Luanxian-Laoting Fault.An inferred north-south-oriented blind fault is present to the north of the Tangshan-Guye Fault.The 1976 M 7.8 Tangshan earthquake occurred at the junction of a shallow northwest-dipping fault and a deep southeast-dipping fault.This study emphasizes that earthquakes in the region are primarily associated with deep blind faults.Some deep blind faults have different geometries compared to shallow faults,suggesting a complex fault system in the region.Overall,this research provides valuable insights into the seismogenic faults in the Beijing–Tianjin–Hebei region.Further studies and monitoring of these faults are essential for earthquake mitigation efforts in this region.

Seismicity and seismogenic mechanism of the M_S 6.0 Luxian earthquake on September 16, 2021

Based on the seismic data recorded by the China Earthquake Networks Center(CENC) in the Luxian area from January 2009 to October 2021,the 3D V_P,V_S, V_P/V_S structures and seismic locations of the area are obtained by joint inversion using the V_P/V_S model consistency-constrained double-difference tomography method(tomoDDMC).The earthquakes in the study area are mainly concentrated at a depth of 2-6 km,and the focal depth is generally shallow.The Ms 6.0 Luxian earthquake occurred at the transition zone of high-and low-velocity anomalies and the aftershock sequence was distributed along the edge of the low-V_P zone.A small number of foreshocks occurred on the west side of the M_S 6.0 Luxian earthquake,while most of the aftershocks were distributed on the east side of the M_S 6.0 Luxian earthquake.The aftershock sequence consisted of three seismic bands with different trends,and the overall distribution was in a NWW direction,which was inconsistent with the spatial distribution of the main active faults nearby.In addition,the spatiotemporal distribution of earthquakes and the variation of b-values are closely related to the industrial water injection activities in the study area,reflecting the activation of pre-existing hidden faults under certain tectonic and stress environments leading to seismic activities in the area.

Seismogenic ULF/ELF Wave Phenomena: Recent Advances and Future Perspectives

There has been enormous progress in the field of electromagnetic phenomena associated with earthquakes (EQs) and EQ prediction during the last three decades, and it is recently agreed that electromagnetic effects do appear prior to an EQ. A few phenomena are well recognized as being statistically correlated with EQs as promising candidates for short-term EQ predictors: the first is ionospheric perturbation not only in the lower ionosphere as seen by subionospheric VLF (very low frequency, 3 kHz f 30 kHz)/LF (low frequency, 30 kHz f 300 kHz) propagation but also in the upper F region as detected by ionosondes, TEC (total electron content) observations, satellite observations, etc, and the second is DC earth current known as SES (Seismic electric signal). In addition to the above two physical phenomena, this review highlights the following four physical wave phenomena in ULF (ultra low frequency, frequency Hz)/ELF (extremely low frequency, 3 Hz frequency 3 kHz) ranges, including 1) ULF lithospheric radiation (i.e., direct radiation from the lithosphere), 2) ULF magnetic field depression effect (as an indicator of lower ionospheric perturbation), 3) ULF/ELF electromagnetic radiation (radiation in the atmosphere), and 4) Schumann resonance (SR) anomalies (as an indicator of the perturbations in the lower ionosphere and stratosphere). For each physical item, we will repeat the essential points and also discuss recent advances and future perspectives. For the purpose of future real EQ prediction practice, we pay attention to the statistical correlation of each phenomenon with EQs, and its predictability in terms of probability gain. Of course, all of those effects are recommended as plausible candidates for short-term EQ prediction, and they can be physically explained in terms of the unified concept of the lithosphere-atmosphere-ionosphere coupling (LAIC) process, so a brief description of this coupling has been carried out by using these four physical parameters though the mechanism of each phenomenon is still poorly understood. In conclusion, we have to emphasize the importance of more statistical studies for more abundant datasets sometimes with the use of AI (artificial intelligence) techniques, more case studies for huge (M greater than 7) EQ events, recommendation of critical analyses, and finally multi-parameters observation (even though it is tough work).

Application of Planar Seismogenic Structure to the Seismotectonic Method——A Case Study in the Dayao-Yao'an Area

In seismic hazard analysis of nuclear power plant of China there is a need to identify both seismogenic structures and seismotectonic zones. In past practice,the identification of the seismogenic structures was often based on the surface active faults and characterization of linear seismic source. In a situation which shows quite strong non-random seismic activity and lacks surface active faults,it is difficult to evaluate the seismic hazard reasonably. Taking seismogenic structures in the Dayao-Yao'an area as a case study in this paper,we discuss the need and the possibility to apply the planar seismogenic structure to the seismotectonic method. We suggest that the planar seismogenic structure should be considered when applying the seismotectonic method to the seismic risk assessment of nuclear engineering in future.

Geometry and tectonic deformation of the seismogenic structure for the 8 August 2017 M_S 7.0 Jiuzhaigou earthquake sequence,northern Sichuan, China

To reveal the geometry of the seismogenic structure of the Aug. 8, 2017 M_S 7.0 Jiuzhaigou earthquake in northern Sichuan,data from the regional seismic network from the time of the main event to Oct. 31, 2017 were used to relocate the earthquake sequence by the tomoDD program, and the focal mechanism solutions and centroid depths of the M_L ≥ 3.5 events in the sequence were determined using the CAP waveform inversion method. Further, the segmental tectonic deformation characteristics of the seismogenic faults were analyzed preliminarily by using strain rosettes and areal strains(As). The results indicate:(1) The relocated M_S 7.0 Jiuzhaigou earthquake sequence displays a narrow ～ 38 km long NNW-SSE-trending zone between the NW-striking Tazang Fault and the nearly NSstriking Minjiang Fault, two branches of the East Kunlun Fault Zone. The spatial distribution of the sequence is narrow and deep for the southern segment, and relatively wide and shallow for the northern segment. The initial rupture depth of the mainshock is 12.5 km, the dominant depth range of the aftershock sequence is between 0 and 10 km with an average depth of 6.7 km. The mainshock epicenter is located in the middle of the aftershock region, showing a bilateral rupture behavior. The centroid depths of 32 M_L ≥ 3.5 events range from 3 to 12 km with a mean of about 7.3 km, consistent with the predominant focal depth of the whole sequence.(2) The geometric structure of the seismogenic fault on the southern section of the aftershock area(south of the mainshock) is relatively simple, with overall strike of ～150° and dip angle ～75°, but the dip angle and dip-orientation exhibit some variation along the segment. The seismogenic structure on the northern segment is more complicated; several faults, including the Minjiang Fault, may be responsible for the aftershock activities. The overall strike of this section is ～159° and dip angle is ～59°, illustrating a certain clockwise rotation and a smaller dip angle than the southern segment. The differences between the two segments demonstrate variation of the geometric structure along the seismogenic faults.(3) The focal mechanism solutions of 32 M_L ≥ 3.5 events in the earthquake sequence have obvious segmental characteristics. Strike-slip earthquakes are dominant on the southern segment, while 50% of events on the northern segment are thrusting and oblique thrusting earthquakes, revealing significant differences in the kinematic features of the seismogenic faults between the two segments.(4) The strain rosettes for the mainshock and the entire sequence of 31 M_L ≥ 3.5 aftershocks correspond to strike-slip type with NWW-SEE compressional white lobes and NNE-SSW extensional black lobes of nearly similar size. The strain rosette and As value of the entire sequence of 22 M_L ≥ 3.5 events on the southern segment are the same as those of the M_S 7.0 mainshock,indicating that the tectonic deformation here is strike-slip. However, the strain rosette of the entire sequence of 10 M_L ≥ 3.5 events on the northern segment show prominent white compressional lobes and small black extensional lobes, and the related As value is up to 0.52,indicating that the tectonic deformation of this segment is oblique thrusting with a certain strike-slip component. Differences between the two segments all reveal distinctly obvious segmental characteristics of the tectonic deformation of the seismogenic faults for the Jiuzhaigou earthquake sequence.

Seismogenic fault and topography control on the spatial patterns of landslides triggered by the 2017 Jiuzhaigou earthquake

Jiuzhaigou National Park, located in northwest plateau of Sichuan Province, is a UNESCO World Heritage Site, and one of the most popular scenic areas in China. On August 8, 2017, a Mw 6.5 earthquake occurred 5 km to the west of a major scenic area, causing 25 deaths and injuring 525, and the Park was seriously affected. The objective of this study was to explore the controls of seismogenic fault and topographic factors on the spatial patterns of these landslides. Immediately after the main shock, field survey, remote-sensing investigations, and statistical and spatial analysis were undertaken. At least 2212 earthquake-triggered landslides were identified, covering a total area of 11.8 km^2. Thesewere mainly shallow landslides and rock falls. Results demonstrated that landslides exhibited a close spatial correlation with seismogenic faults. More than 85% of the landslides occurred at 2200 to 3700 m elevations. The largest quantity of landslides was recorded in places with local topographic reliefs ranging from 200 to 500 m. Slopes in the range of ~20°-50° are the most susceptible to failure. Landslides occurred mostly on slopes facing east-northeast(ENE), east(E), east-southeast(ESE), and southeast(SE), which were nearly vertical to the orientation of the seismogenic fault slip. The back-slope direction and thin ridge amplification effects were documented. These results provide insights on the control of the spatial pattern of earthquake-triggered landslides modified by the synergetic effect of seismogenic faults and topography.

Seismogenic Structure around the Epicenter of the May 12,2008 Wenchuan Earthquake from Micro-seismic Tomography

A three-dimensional local-scale P-velocity model down to 25 km depth around the main shock epicenter region was constructed using 83821 event-to-receiver seismic rays from 5856 aftershocks recorded by a newly deployed temporary seismic network. Checkerboard tests show that our tomographic model has lateral and vertical resolution of -2 km. The high-resolution P-velocity model revealed interesting structures in the seismogenic layer： （1） The Guanxian-Anxian fault, Yingxiu-Beichuan fault and Wenchuan-Maoxian fault of the Longmen Shan fault zone are well delineated by sharp upper crustal velocity changes; （2） The Pengguan massif has generally higher velocity than its surrounding areas, and may extend down to at least -10 km from the surface; （3） A sharp lateral velocity variation beneath the Wenchuan-Maoxian fault may indicate that the Pengguan massif＇s western boundary and/or the Wenchuan-Maoxian fault is vertical, and the hypocenter of the Wenchuan earthquake possibly located at the conjunction point of the NW dipping Yingxiu-Beichuan and Guanxian-Anxian faults, and vertical Wenchuan-Maoxian fault; （4） Vicinity along the Yingxiu- Beichuan fault is characterized by very low velocity and low seismicity at shallow depths, possibly due to high content of porosity and fractures; （5） Two blocks of low-velocity anomaly are respectively imaged in the hanging wall and foot wall of the Guanxian-Anxian fault with a -7 km offset with -5 km vertical component.

Upper crustal velocity and seismogenic environment of the M7.0 Jiuzhaigou earthquake region in Sichuan, China

On August 8,2017,a magnitude 7.0 earthquake occurred in Jiuzhaigou County,Sichuan Province,China.The deep seismogenic environment and potential seismic risk in the eastern margin of Tibetan Plateau have once again attracted the close attention of seismologists and scholars at home and abroad.The post-earthquake scientific investigation could not identify noticeable surface rupture zones in the affected area;the complex tectonic background and the reason(s)for the frequent seismicity in the Jiuzhaigou earthquake region are unclear.In order to reveal the characteristics of the deep medium and the seismogenic environment of the M7.0 Jiuzhaigou earthquake region,and to interpret the tectonic background and genesis of the seismicity comprehensively,in this paper,we have reviewed all available observation data recorded by the regional digital seismic networks and large-scale,dense mobile seismic array(China Array)for the northern section of the North-South Seismic Belt around Jiuzhaigou earthquake region.Using double-difference seismic tomography method to invert the three-dimensional P-wave velocity structure characteristics of the upper crust around the Jiuzhaigou earthquake region,we have analyzed and discussed such scientific questions as the relationship between the velocity structure characteristics and seismicity in the Jiuzhaigou earthquake region,its deep tectonic environment,and the ongoing seismic risk in this region.We report that:the P-wave velocity structure of the upper crust around the Jiuzhaigoug earthquake region exhibits obvious lateral inhomogeneity;the distribution characteristics of the shallow P-wave velocity structure are closely related to surface geological structure and formation lithology;the M7.0 Jiuzhaigou earthquake sequence is closely related to the velocity structure of the upper crust;the mainshock of the M7.0 earthquake occurred in the upper crust;the inhomogeneous variation of the velocity structure of the Jiuzhaigou earthquake area and its surrounding medium appears to be the deep structural factor controlling the spatial distribution of the mainshock and its sequence.The 3D P-wave velocity structure also suggests that the crustal low-velocity layer of northeastern SGB(Songpan-GarzêBlock)stretches into MSM(Minshan Mountain),and migrates to the northeast,but the tendency to emerge as a shallow layer is impeded by the high-velocity zone of Nanping Nappe tectonics and the Bikou Block.Our results reveal an uneven distribution of high-and low-velocity structures around the Tazang segment of the East Kunlun fault zone.Given that the rupture caused by the Jiuzhaigou earthquake has enhanced the stress fields at both ends of the seismogenic fault,it is very important to stay vigilant to possible seismic hazards in the large seismic gap at the Maqu-Maqên segment of the East Kunlun fault zone.

Seismogenic Structures of the 2006 ML4.0 Dangan Island Earthquake Offshore Hong Kong

The northern margin of the South China Sea, as a typical extensional continental margin, has relatively strong intraplate seismicity. Compared with the active zones of Nanao Island, Yangjiang, and Heyuan, seismicity in the Pearl River Estuary is relatively low. However, a ML4.0 earthquake in 2006 occurred near Dangan Island(DI) offshore Hong Kong, and this site was adjacent to the source of the historical M5.8 earthquake in 1874. To reveal the seismogenic mechanism of intraplate earthquakes in DI, we systematically analyzed the structural characteristics in the source area of the 2006 DI earthquake using integrated 24-channel seismic profiles, onshore–offshore wide-angle seismic tomography, and natural earthquake parameters. We ascertained the locations of NW-and NE-trending faults in the DI sea and found that the NE-trending DI fault mainly dipped southeast at a high angle and cut through the crust with an obvious low-velocity anomaly. The NW-trending fault dipped southwest with a similar high angle. The 2006 DI earthquake was adjacent to the intersection of the NE-and NW-trending faults, which suggested that the intersection of the two faults with different strikes could provide a favorable condition for the generation and triggering of intraplate earthquakes. Crustal velocity model showed that the high-velocity anomaly was imaged in the west of DI, but a distinct entity with low-velocity anomaly in the upper crust and high-velocity anomaly in the lower crust was found in the south of DI. Both the 1874 and 2006 DI earthquakes occurred along the edge of the distinct entity. Two vertical cross-sections nearly perpendicular to the strikes of the intersecting faults revealed good spatial correlations between the 2006 DI earthquake and the low to high speed transition in the distinct entity. This result indicated that the transitional zone might be a weakly structural body that can store strain energy and release it as a brittle failure, resulting in an earthquake-prone area.

Seismogenic tectonics of the Qian-Gorlos earthquake in Jilin Province,China

The Qian-Gorlos earthquake, which occurred in the Songliao basin in Jilin Province in 1119 AD, was the largest earthquake to occur in NE China before the 1975 Haicheng earthquake. Based on historical records and surface geological investigations, it has been suggested previously that the earthquake epicenter was in the Longkeng area. However, other workers have considered the epicenter to be in the Halamaodu area based on the landslides and faults found in this region. No seismogenic structure has yet been found in either of these two regions.We tried to detect active faults in the urban areas of Songyuan City, where the historical earthquake was probably located. One of the aims of this work was to clarify the seismogenic structure so that the seismic risk in the city could be more accurately evaluated. The area was investigated and analyzed using information from remote sensing and topographic surveys, seismic data from petroleum exploration, shallow seismic profiles, exploratory geological trenches on fault outcrops, and borehole data. The geophysical data did not reveal any evidence of faults cutting through Cretaceous or later strata under the Longkeng scarp, which has been suggested to be structural evidence of the Qian-Gorlos earthquake. The continuous fault surfaces on the back edge of terraces in theHalamaodu area stretch for [3.5 km and were probably formed by tectonic activity. However, results from shallow seismic profiles showed that the faults did not extend downward, with the corresponding deep structure being identified as a gentle kink band. A new reverse fault was found to the west of the two suggested epicenters, which presented as a curvilinear fault extending to the west, and was formed by two groups of NE- and NW-trending faults intersecting the Gudian fault. Three-dimensional seismic and shallow seismic data from petroleum exploration revealed its distinct spatial distribution and showed that the fault may cut through Late Quaternary strata. Exploration boreholes and later geomorphological studies provided further proof of this. Based on these results and analysis,the Gudian fault was confirmed as having been an active fault since the Late Quaternary, with the possibility of earthquakes of magnitude [7 in the future. The QianGorlos earthquake was most probably the result of breakage on one or two sections of this 66-km-long fault.

Relocation and seismogenic structure of the 1998 Zhangbei-Shangyi earthquake sequence

On January 10, 1998, an earthquake of ML=6.2 occurred in the border region between the Zhangbei County and Shangyi County of Hebei Province. This earthquake has been the most significant event occurred in the northern China in the recent years. Historical seismicity in the Zhangbei-Shangyi region was very low. In the epicentral area no active fault capable of generating a moderate earthquake like this event was found. The earthquake locations of the main shock and its aftershocks of the Zhangbei-Shangyi earthquake sequence given by several agencies and authors were diverse and the resulted hypocentral distribution revealed no any dominant horizontal lineation. To study the seismogenic structure of the Zhangbei-Shangyi earthquake, in this paper the main shock and its aftershocks with ML3.0 of the Zhangbei-Shangyi earthquake sequence were relocated using the master event relative relocation algorithm. The relocated results show that the epicentral location of the main shock was 41.145癗, 114.462癊, which was located 4 km to the NE of the macro-epicenter of the main shock. The relocated focal depth of the main shock was 15 km. The hypocenters of the aftershocks distributed in a nearly vertical N20E-striking plane and its vicinity. The relocated results of the Zhangbei-Shangyi earthquake sequence clearly indicated that the seismogenic structure of this event was a nearly N-S- to NNE-SSW-striking fault with right-lateral and reverse slip, and that the occurrence of this event was associated with the horizontal and ENE-oriented compressive tectonic stress, which was compatible with the tectonic stress field in the northern China.

Spatio-temporal characteristics of aftershocks and seismogenic structure of the 2011 Mw9.0 Tohoku earthquake,Japan

The Tohoku megathrust earthquake, which occurred on March 11, 2011 and had an epicenter that was 70 km east of Tohoku, Japan, resulted in an estimated ten′s of billions of dollars in damage and a death toll of more than 15 thousand lives, yet few studies have documented key spatio-temporal seismogenic characteristics. Specifically, the temporal decay of aftershock activity, the number of strong aftershocks (with magnitudes greater than or equal to 7.0), the magnitude of the greatest aftershock, and area of possible aftershocks. Forecasted results from this study are based on Gutenberg-Richter’s relation, Bath’s law, Omori’s law, and Well’s relation of rupture scale utilizing the magnitude and statistical parameters of earthquakes in USA and China (Landers, Northridge, Hector Mine, San Simeon and Wenchuan earthquakes). The number of strong aftershocks, the parameters of Gutenberg-Richter’s relation, and the modified form of Omori’s law are confirmed based on the aftershock sequence data from the Mw9.0 Tohoku earthquake. Moreover, for a large earthquake, the seismogenic structure could be a fault, a fault system, or an intersection of several faults. The seismogenic structure of the earthquake suggests that the event occurred on a thrust fault near the Japan trench within the overriding plate that subsequently triggered three or more active faults producing large aftershocks.

Study of the Seismogenic Structure of the October 12^(th),2019 MS5.2 Beiliu Earthquake,Guangxi,China

On October 12th,2019,a MS5.2 earthquake occurred in Beiliu City,Guangxi Zhuang Autonomous Region,China,with a focal depth of 10 km. The epicenter is located in the junction of Guangxi and Guangdong where the moderate-strong earthquakes are relatively active. The highest intensity of this earthquake is estimated up to Ⅵ besides the isoseismic line showed an ellipse shape with a long axis trend in the NW direction.The aftershocks are not evenly distributed. The parameters of the focal mechanism solutions are: strike 346°,dip 85°,rake 19° for the nodal planeⅠ,and strike 254°,dip 71°,rake 175° for the nodal planeⅡ. The type of the coseismic fault is strikeslip. After analyzing these results above and the active faults near the epicenter,we get that the nodal planeⅠ is interpreted as the coseismic rupture plane and the BamaBobai Fault is a seismogenic structure of MS5.2 Beiliu earthquake.

Seismogenic mechanism of the Lancang and Gengma earthquakes

The typical earthquake disaster and its seismogenic mechanism in the meizoseismal regions of M7. 6 Lancangand M7. 2 Gengma earthquakes are introduced and analysed in this paper. Combining with the tectonic features in the earthquake regions, the difference of the tectonic activity between the two earthquakes is alsoshown in the paper: the strong strike offset feature of Muga fault for M7. 6 Lancang earthquake, while thedip-slip feature of Hanmuba fault for M7. 2 Gengma earthquake. The obvious difference in the displacementbetween Muga fault and Hanmuba fault probably related to the part adjustment and diversion for the principalcompressive stress axis in the focal area of M7. 2 Gengma earthquake. The M7. 6 Lancang earthquake triggered M7. 2 Gengma earthquake.

Research on the Tectonic Environment and Seismogenic Mechanism of the 1927 Gulang Great Earthquake with M=8.0

In this paper, we discussed the seismotectonic environment of the deep-seated and shallowcrust and seismological and geological model caused the 1927 Gulang great earthquake, basedon the recent research concerning about the active fault, surface rupture, fault planesolution, seismic activity, as well as the deep geophysical exploration data analysis in theepicentral area.The result shows that the 1927 Gulang great earthquake was caused by NE-SW-strikingcompressional thrusting. It was a latest event occurred in the reverse fault-folding belt thatdeveloped along the intracrustal decollement.

Crustal Structure and Seismogenic Zone of Cameroon: Integrated Seismic, Geological and Geophysical Data

This study describes the seismo-tectonic evolution of Cameroon. It is noticed that seismic activity is largely related to the Cameroon volcanic line (CVL) and many of the tectonic phenomena follow the previous structural lines. Although the area is that of a relatively low seismicity, the effects of a given earthquake could be considerable. This study combines seismic records, from 1952 to 2002 and from 2005 to 2007, with the integration of existing structural information to better define the seismogenic zones. An important identified cluster of epicenters in S-W defines the first seismic source region where events’ characteristics show a weak seismicity related to volcanic activity. The second seismogenic zone, in the north of Mount Cameroon volcano, illustrates the activity of Central Cameroon Shear Zone (CCSZ) faults;its seismicity is considered weak to moderate with maximum magnitude recorded which is 5.1 Mb. The area of “Sanaga Shear Zone” (SSZ) constitutes the third seismic source region with moderate seismicity in which maximum magnitude recorded is 5.8 Mb;Depth of its faults segments is evaluated at 33 km. The fourth Source Region follows the North boundary of Congo Craton;a characteristic event with magnitude of 6 M allows evaluating fault depth at 33 km. Also three zones define crustal structure: the South Domain with thick crust, the Center Domain characterized by thin crust, active tectonic and volcanic structures and the north domain with shallow Moho.

Some results of modeling D-D seismogenic pattern by the fracture model experiment of large-scale rock samples(I)

sing the natural limestone samples taken from the field with dimension of 500 mm×500 mm×1 000 mm, the D-D (dilatancy-diffusion) seismogeny pattern was modeled under the condition of water injection, which observes the time-space evolutionary features about the relative physics fields of the loaded samples from deformation, formation of microcracks to the occurrence of main rupture. The results of observed apparent resistivity show: ① The process of the deformation from microcrack to main rupture on the loaded rock sample could be characterized by the precursory spatial-temporal changes in the observation of apparent resistivity; ② The precursory temporal changes of observation in apparent resistivity could be divided into several stages, and its spatial distribution shows the difference in different parts of the rock sample; ③ Before the main rupture of the rock sample the obvious ″tendency anomaly′ and ′short-term anomaly″ were observed, and some of them could be likely considered as the ″impending earthquake ″anomaly precursor of apparent resistivity. The changes and distribution features of apparent resistivity show that they are intrinsically related to the dilatancy phenomenon of the loaded rock sample. Finally, this paper discusses the mechanism of resistivity change of loaded rock sample theoretically.

Study on the pattern and mode of vertical crustal deformation during the seismogenic process of intraplate strong earthquakes

In this paper,the data of vertical crustal deformations associated with the Xingtai,Haicheng,Tangshan and Datong strong earthquakes in North China Block have been processed,analyzed and studied.The result shows that the seismogenic processes of strong earthquakes are accompanied by an evolution of crustal deformation as follows: ① The area of crustal deformation anomaly should be large in radius and extensive in range. ② There are both the 'field' and 'source' of crustal deformation anomaly,with the 'source' existing inside the'field' but differing from the 'field' distinctly. ③ The evolution process includes a number of steps.Firstly, movements in the 'field region transform from the normal state to an anomalous state to start the formation of field precursors.Secondly,movements in the 'source' region become outstandingly remarkable. Thirdly,anomalies in the 'field' region that surrounds the 'source' become increasingly intense.Fourthly,the 'source' region enters a state of immobilized-movement.Finally,an earthquake occurs. ④ There are usually one or more areas where the anomaly field forms a special pattern,mostly a four-quadrant distribution.The area which is'activated' first but becomes 'immobilized' afterwards often coincides with the source area.⑤ The appearance of an obviously immobilized area inside the obviously activated area is a precursory feature which suggests that an earthquake is impending.⑥ The longer the duration of immobilized-movement,the higher the magnitude of earthquake would be.The above might be the basic mode of vertical crustal deformation during the seismogenic process of strong intraplate earthquakes.