Short-pulse high-power microwave breakdown at high pressures

The fluid model is proposed to investigate the gas breakdown driven by a short-pulse（such as a Gaussian pulse） highpower microwave at high pressures.However,the fluid model requires specification of the electron energy distribution function（EEDF）;the common assumption of a Maxwellian EEDF can result in the inaccurate breakdown prediction when the electrons are not in equilibrium.We confirm that the influence of the incident pulse shape on the EEDF is tiny at high pressures by using the particle-in-cell Monte Carlo collision（PIC-MCC） model.As a result,the EEDF for a rectangular microwave pulse directly derived from the Boltzmann equation solver Bolsig＋ is introduced into the fluid model for predicting the breakdown threshold of the non-rectangular pulse over a wide range of pressures,and the obtained results are very well matched with those of the PIC-MCC simulations.The time evolution of a non-rectangular pulse breakdown in gas,obtained by the fluid model with the EEDF from Bolsig＋,is presented and analyzed at different pressures.In addition,the effect of the incident pulse shape on the gas breakdown is discussed.

Optimization of Short-Pulse GPR Transmit Antenna

By analyzing the current distribution of Bow-Tie antenna used in short-pulse ground penetrating radar, the methods of antenna load and driving are presented in this paper to reduce strength of reflective wave both at antenna end and excitation point. The numerical simulation results show the strength of reflective wave is smaller than ?55 dB comparing with the driving wave when the methods are adopted. Key words short-pulse GPR - resistive loading - finite difference time domain method CLC number TN 820 Foundation item: Supported by the National Natural Science Foundation of China (49984001)Biography: LI Tai-quan (1961-), male, Ph. D candidate, research direction: antenna model and design

Central Opioid Peptide-containing Neurons Mediates Therapeutic Effect of Short-pulse Gastric Electrical Stimulation on Dyspepsia-like Symptoms in Dogs

This study investigated whether the curative effect of short-pulse gastric electrical stimulation （GES） on the vasopressin-induced dyspeptic symptoms was mediated by central opioid peptide-producing neurons. Five female beagle dogs implanted with 1 pair of electrodes in gastric serosa were used in a two-experiment study. In experiment one, the brain was scanned by positron emission tomography in 3 dogs with and without short-pulse GES, and the radioactivity in nuclei of solitary tract （NST） and hypothalamus was detected. Experiment two was composed of 4 sessions. In session one, the dogs were injected with vasopressin in the absence of short-pulse GES. With session two, the short-pulse GES was simultaneously given via the electrodes with the injection of vasopressin. In sessions three and four, naloxone and naloxone methiodide was administered respectively in the presence of short-pulse GES. Motion sickness-like symptoms were scored and compared among the different sessions. The results showed that the short-pulse GES significantly increased the radioactivity in NST and hypothalamic nuclei （P〈0.05, vs control）. The short-pulse GES could ameliorate the vasopressin-induced motion sickness-like symptoms in dogs. Naloxone, but not naloxone methiodide could attenuate the curative effects of short-pulse GES. It is concluded that NST and hypothalamic nuclei may participate in the mediation of the curative effects of short-pulse GES on dyspepsia-like symptoms. Central opioid peptide-containing neurons presumably mediate the therapeutic effect on dyspeptic symptoms of short-pulse GES.

An experimental study of temperature and moisture content of wet porous materials under short-pulsed laser heating

The measurements of temperature and moisture content of a wet porous material were accomplished on the micro-seconds scale. The temperature wave was observed when the wet porous material was heated by short-pulsed laser with high power. It firstly revealed that the moisture content of wet porous material rapidly rises twice in one laser irradiation. The influences of laser parameters, the thickness and initial moisture content of the wet porous material on its temperature and moisture content were investigated.

Few-layer MoS2 saturable absorbers for short-pulse laser technology: current status and future perspectives [Invited]

Few-layer molybdenum disulfide（MoS2） is emerging as a promising quasi-two-dimensional material for photonics and optoelectronics, further extending the library of suitable layered nanomaterials with exceptional optical properties for use in saturable absorber devices that enable short-pulse generation in laser systems. In this work, we catalog and review the nonlinear optical properties of few-layer MoS2, summarize recent progress in processing and integration into saturable absorber devices, and comment on the current status and future perspectives of MoS2-based pulsed lasers.

Short-pulse laser-driven x-ray radiography

We have developed a new radiography setup with a short-pulse laser-driven x-ray source. Using a radiography axis perpendicular to both long- and short-pulse lasers allowed optimizing the incident angle of the short-pulse laser on the x-ray source target. The setup has been tested with various x-ray source target materials and different laser wavelengths.Signal to noise ratios are presented as well as achieved spatial resolutions. The high quality of our technique is illustrated on a plasma flow radiograph obtained during a laboratory astrophysics experiment on POLARs.

Implementation of a phase plate for the generation of homogeneous focal-spot intensity distributions at the high-energy short-pulse laser facility PHELIX

We propose and demonstrate the use of random phase plates(RPPs)for high-energy sub-picosecond lasers.Contrarily to previous work related to nanosecond lasers,an RPP poses technical challenges with ultrashort-pulse lasers.Here,we implement the RPP near the beginning of the amplifier and image-relay it throughout the laser amplifier.With this,we obtain a uniform intensity distribution in the focus over an area 1600 times the diffraction limit.This method shows no significant drawbacks for the laser and it has been implemented at the PHELIX laser facility where it is now available for users.

Hybrid Method for the Formation of Biocomposites on the Surface of Stainless Steel Implants

This study reports a hybrid method which allows the formation of biocomposites on stainless steel implants. The main idea of the method is to create multilayer coatings consisting of titanium primer layer and a microarc calcium-phosphate coating. The titanium layer is deposited from plasma of continuous vacuum-arc discharge, and calcium-phosphate coating is formed by the microarc oxidation technique. The purpose of the hybrid method is to combine the properties of good strength stainless steel with high bioactivity of calcium-phosphate coating. This paper describes the chemical composition, morphology characteristics, adhesion and the ability of the formed biocomposites to stimulate the processes of osteoinduction. It is expedient to use such biocomposites for implants which carry heavy loads and are intended for long-term use, e.g. total knee endoprosthesis.

Controllability of intense-laser ion acceleration

An ion beam has the unique feature of being able to deposit its main energy inside a human body to kill cancer cells or inside material. However, conventional ion accelerators tend to be huge in size and cost. In this paper, a future intenselaser ion accelerator is discussed to make the laser-based ion accelerator compact and controllable. The issues in the laser ion accelerator include the energy efficiency from the laser to the ions, the ion beam collimation, the ion energy spectrum control, the ion beam bunching, and the ion particle energy control. In the study, each component is designed to control the ion beam quality by particle simulations. The energy efficiency from the laser to ions is improved by using a solid target with a fine sub-wavelength structure or a near-critical-density gas plasma. The ion beam collimation is performed by holes behind the solid target or a multi-layered solid target. The control of the ion energy spectrum and the ion particle energy, and the ion beam bunching are successfully realized by a multi-stage laser–target interaction.

Design of the pulse duty cycle of the pseudolite signal in local area augmentation systems

The short-pulse TDMA signal is an excellent solution to the near-far problem in the pseudolite augmentation systems,and the pulse duty cycle is an important element in the solution.This paper aims at designing the duty cycle of the pseudolite pulse signals with a theoretical method.At first,the scope of the duty cycle is derived theoretically with the object of ensuring the reception of both the pseudolite signals and the satellite signals,and the expression for the theoretical upper limit is given.Then based on the proposed expression,the duty cycles of Galileo pseudolite pulse signals are designed.The theoretical upper limit can guide the design of the short-pulse TDMA pseudolite signals.