High adsorption selectivity of activated carbon and carbon molecular sieve boosting CO_(2)/N_(2) and CH_(4)/N_(2) separation

Flue gas and coal bed methane are two important sources of greenhouse gases.Pressure swing adsorption process has a wide range of application in the field of gas separation,and the selection of adsorbent is crucial.In this regard,in order to assess the better adsorbent for separating CO_(2) from flue gas and CH_(4) from coal bed methane,adsorption isotherms of CO_(2),CH_(4) and N_(2) on activated carbon and carbon molecular sieve are measured at 303.15,318.15 and 333.15 K,and up to 250 kPa.The experimental data fit better with Langmuir 2 compared to Langmuir 3 and Langmuir-Freundlich models,and Clausius-Clapeyron equation was used to calculate the isosteric heat.Both the order of the adsorbed amount and the adsorption heat on the two adsorbents are CO_(2)>CH_(4)>N_(2).The adsorption kinetics are calculated by the pseudo-first kinetic model,and the order of adsorption rates on activated carbon is N_(2)-CH_(4)>CO_(2),while on carbon molecular sieve,it is CO_(2)-N_(2)>CH_(4).It is shown that relative molecular mass and adsorption heat are the primary effect on kinetics for activated carbon,while kinetic diameter is the main resistance factor for carbon molecular sieve.Moreover,the adsorption selectivity of CH_(4)/N_(2) and CO_(2)/N_(2) were estimated with the ideal adsorption solution theory,and carbon molecular sieve performed best at 318.15 K for both CO_(2) and CH_(4) separation.The study suggested that activated carbon is a better choice for separating flue gas and carbon molecular sieve can be a strong candidate for separating coal bed methane.

Facile synthesis of Cu-doped manganese oxide octahedral molecular sieve for the efficient degradation of sulfamethoxazole via peroxymonosulfate activation

Advanced processes for peroxymonosulfate(PMS)-based oxidation are efficient in eliminating toxic and refractory organic pol-lutants from sewage.The activation of electron-withdrawing HSO_(5)^(-)releases reactive species,including sulfate radical(·SO_(4)^(-)),hydroxyl radical(·OH),superoxide radical(·O_(2)^(-)),and singlet oxygen(1O_(2)),which can induce the degradation of organic contaminants.In this work,we synthesized a variety of M-OMS-2 nanorods(M=Co,Ni,Cu,Fe)by doping Co^(2+),Ni^(2+),Cu^(2+),or Fe^(3+)into manganese oxide oc-tahedral molecular sieve(OMS-2)to efficiently remove sulfamethoxazole(SMX)via PMS activation.The catalytic performance of M-OMS-2 in SMX elimination via PMS activation was assessed.The nanorods obtained in decreasing order of SMX removal rate were Cu-OMS-2(96.40%),Co-OMS-2(88.00%),Ni-OMS-2(87.20%),Fe-OMS-2(35.00%),and OMS-2(33.50%).Then,the kinetics and struc-ture-activity relationship of the M-OMS-2 nanorods during the elimination of SMX were investigated.The feasible mechanism underly-ing SMX degradation by the Cu-OMS-2/PMS system was further investigated with a quenching experiment,high-resolution mass spec-troscopy,and electron paramagnetic resonance.Results showed that SMX degradation efficiency was enhanced in seawater and tap water,demonstrating the potential application of Cu-OMS-2/PMS system in sewage treatment.

Microwave irradiation-induced alterations in physicochemical properties and methane adsorption capability of coals:An experimental study using carbon molecular sieve

In order to comprehend the applicability of microwave irradiation for recovering coalbed methane,it is necessary to evaluate the microwave irradiation-induced alterations in coals with varying levels of metamorphism.In this work,the carbon molecular sieve combined with KMnO_(4)oxidation was selected to fabricate carbon molecular sieve with diverse oxidation degrees,which can serve as model substances toward coals.Afterwards,the microwave irradiation dependences of pores,functional groups,and highpressure methane adsorption characteristics of model substances were studied.The results indicated that microwave irradiation causes rearrangement of oxygen-containing functional groups,which could block the micropores with a size of 0.40-0.60 nm in carbon molecular sieve;meanwhile,naphthalene and phenanthrene generated by macro-molecular structure pyrolysis due to microwave irradiation could block the micropores with a size of 0.70-0.90 nm.These alterations in micropore structure weaken the saturated methane adsorption capacity of oxidized carbon molecular sieve by 2.91%-23.28%,suggesting that microwave irradiation could promote methane desorption.Moreover,the increased mesopores found for oxidized carbon molecular sieve after microwave irradiation could benefit CH4 diffusion.In summary,the oxidized carbon molecular sieve can act as model substances toward coals with different ranks.Additionally,microwave irradiation is a promising technology to enhance coalbed methane recovery.

In Situ Growth of 2D Metal–Organic Framework Ion Sieve Interphase for Reversible Zinc Anodes

Zinc metal anodes are gaining popularity in aqueous electrochemical energy storage systems for their high safety,cost-effectiveness,and high capacity.However,the service life of zinc metal anodes is severely constrained by critical challenges,including dendrites,water-induced hydrogen evolution,and passivation.In this study,a protective two-dimensional metal–organic framework interphase is in situ constructed on the zinc anode surface with a novel gel vapor deposition method.The ultrathin interphase layer(~1μm)is made of layer-stacking 2D nanosheets with angstrom-level pores of around 2.1Å,which serves as an ion sieve to reject large solvent–ion pairs while homogenizes the transport of partially desolvated zinc ions,contributing to a uniform and highly reversible zinc deposition.With the shielding of the interphase layer,an ultra-stable zinc plating/stripping is achieved in symmetric cells with cycling over 1000 h at 0.5 mA cm−2 and~700 h at 1 mA cm^(−2),far exceeding that of the bare zinc anodes(250 and 70 h).Furthermore,as a proof-of-concept demonstration,the full cell paired with MnO_(2) cathode demonstrates improved rate performances and stable cycling(1200 cycles at 1 A g−1).This work provides fresh insights into interphase design to promote the performance of zinc metal anodes.

Ultrastructural Studies on the Sieve Elements in Root Protophleom of Arabidopsis thaliana

The ultrastructures of the root protophleom sieve element at different developmental stages of Arabidopsis thaliana L. were investigated using the technique of high pressure freezing and freeze substitution fixing specimen. The results show that in the development of the sieve elements, the nuclei undergo typical characteristics of the programmed cell death (PCD): the nuclear envelopes form emboli, the chromatin condenses and aggregates towards the nuclear envelope, which degrades and fully disappears later. Before the nucleus degradation, neither the nuclear envelope undulation, nucleus lobe nor marked dilation (or bleb) of perinuclear space could be observed. In the cytoplasm of the mature sieve element, there are starch-like granules separately sheathed with a layer of membrane and usually with mitochondria around. These gnanules seem to provide substrates to mitochondria in their function. Small vacuoles originate from endoplasmic reticulum (ER), and no bigger vacuole was found.

Cytological Studies on the Development of Sieve Element and Floral Nectary Tissue in Arabidopsis thaliana

Ultrastructural changes in the sieve element and dense cells of nectariferous tissue during the development of floral nectary in Arabidopsis thaliana L. were investigated with transmission electron microscopy. Samples were prepared with high pressure freezing and freeze substitution techniques. The ultrastructure of dense cell was similar to that of sieve element at its early developmental stage. With the concurrent agglutination of chromatin in the nucleus, the abnormal location of organelles and the high density of cytoplasm, the ultrastructural characteristics in die dense cells of the nectariferous tissue and in the sieve element are matched with those of the programmed cell death in animal and plant reported in recent years. The disorganization of nucleus and most organelles in the differentiation of sieve elements and dense cells is closely associated with the transportation and modification of pre-nectar and the transference of nectar. This suggests that the cytological changes in sieve element and nectariferous tissue are closely associated with the nectary functional activities.

MODELING AND NUMERICAL SIMULATION OF ONBOARD MOLECULAR SIEVE OXYGEN GENERATION SYSTEM

A mathematical model for simulating concentric-bed and other components of molecular sieve oxygen concentrator is established. In the model, the binary Langmuir equilibrium adsorption equation is adopted to describe the adsorption performance of the adsorbent, the linear driving force (LDF) model is used to describe the mass transfer rate, and the thermal effect during adsorption is considered. The finite difference method is used in simulation and comparison. Numerical results have a reasonable agreement with the experimental research.

一种Sieve极大似然估计的渐近性质

该文针对部分线性模型，在响应变量的观测值为Ⅰ型区间删失数据的情形下，讨论Ｓｉｅｖｅ极大似然估计的渐近性质．用三角级数来构造Ｓｉｅｖｅ空间，在一定条件下证明了该估计具有强相合性；得到了该估计的弱收敛速度，并且非参数部分的估计达到了最优收敛速度；还算出了参数部分的信息界．

STUDY ON THE THREE PHASE EQUILIBRIA OF ETHANOL WATER 4A MOLECULAR SIEVE

Vapor liquid solid three phase equilibria of ethanol water 4A molecular sieve system are studied experimentally and theoritically. It is proved that the addition of adsorbent does not change the equilibrium relation between vapor and bulk liquid phase. A calculation procedure is proposed to predict vapor liquid solid (adsorbent) three phase euquilibria.

The synthesis of Co-doped SAPO-5 molecular sieve and its performance in the oxidation of cyclohexane with molecular oxygen

Silicoaluminophosphate（SAPO） molecular sieves doped with cobalt（Co-SAPO-5） were synthesized hydrothermally with different concentrations of Co.Each sample was characterized by X-ray diffraction,N2 adsorption-desorption,scanning electron microscopy,ultraviolet-visible spectroscopy,temperature-programmed desorption of NH3（NH3-TPD）,and infrared spectrascopy of adsorbed pyridine（Py-IR）.The results showed that Co was highly dispersed in the Co-SAPO-5 samples.In addition,a part of the Co content had been incorporated into the SAPO-5 framework,while the remainder existed on the surface as extra-framework Co.The surface areas of the Co-SAOP-5 samples were similar to the SAPO-5 sample.However,the pore volumes of the Co-SAOP-5 samples were lower than that of the SAOP-5 sample.As the concentration of Co increased,the pore volume gradually decreased because extra-framework cobalt oxide was present on the catalyst surface.NH3-TPD and Py-IR results revealed that the amount of Br（？）nsted acid and the total amount of acid for the Co-SAPO-5 samples were higher than that for the SAPO-5 sample.These values were also higher for samples with higher Co content.The catalytic activity of the Co-SAPO-5 samples was evaluated for the oxidation of cyclohexane with molecular oxygen.When Co was added to the SAPO-5 catalyst,the catalytic activity of the Co-SAPO-5 catalysts improved.In addition,the conversion of cyclohexane increased as the Co content in the Co-SAPO-5 catalysts increased.However,with a high conversion of cyclohexane（6.30%）,the total selectivity of cyclohexanone（K） and cyclohexanol（A） decreased sharply.The K/A ratio ranged from 1.15 to 2.47.The effects of reaction conditions（i.e.,reaction temperature,reaction time,initial oxygen pressure,and the catalyst amount） on the performance of the Co-SAPO-5 catalysts have also been measured.Furthermore,the stability of the Co-SAPO-5 catalyst was explored and found to be good for the selective oxidation of cyclohexane by molecular oxygen.

Mineralogical Characterization of Sieved and Un-Sieved Samples

Mineralogical characterization applied to mineral processing is now widespread. The first step for a mineralogi- cal characterization study is usually size fractionation. Preparation of polished sections is done on size fractions to reduce complications in making representative cross sections of particles with large size differences. A sample is commonly fractionated into five or six size intervals. The drawback of this procedure is that it makes liberation studies more expensive, because one sample actually produces five or six sub-samples that need to be studied, i.e. one from each size interval. Thus to reduce cost of liberation studies, it would be desirable to study the un-sized sample. This paper provides a comparative liberation study of a set of samples both using size fractions and using the un-sized samples. The samples studied are the feed, the concentrate and the tails of a lead rougher flotation circuit. The results consistently show significant differences between the sized and the un-sized samples. Nevertheless, the results indicate that un-corrected liberation data from un-sized samples can be used for comparative studies that involve several related samples. Thus, it is possible to improve (or further understand) a concentrator circuit by using mineralogical data from un-sized samples around such circuit.

A n-fold Calculating Sieve Formula for Some Symmetric Sets

This paper introduces a method of sieve which can be to calculate the number of residues of the integers 1,2,...,2a sifted by n paiwise coprime numbers.

基于Sieve Bootstrap方法的长记忆过程均值变点的检验

本文提出一个新的统计量来检测长记忆时间序列中可能存在的均值变点,在原假设下推导出了检验统计量的极限分布在备择假设下证明了检验方法的一致性.为便于实际应用还提出了一种Sieve Bootstrap方法来近似统计量的临界值.模拟结果表明本文方法不仅可以很好的控制经验水平,而且相比已有均值变点检验的方法经验势也有了一定幅度的提高.

基于sieve方法的响应变量为当前状态数据的部分函数型线性模型的估计

利用sieve方法研究响应变量为当前状态数据的部分函数型线性模型的估计.在一定的条件下,证明了该估计的强相合性和渐近正态性,得到了该估计的收敛速度,并且非参数部分达到最优收敛速度.最后通过一个数值模拟来研究该估计的有限样本性质.

Catalytic Transformation of Bio-oil to Olefins with Molecular Sieve Catalysts

Catalytic conversion of bio-oil into light olefins was performed by a series of molecular sieve catalysts, including HZSM-5, MCM-41, SAPO-34 and Y-zeolite. Based on the light olefins yield and its carbon selectivity, the production of light olefins decreased in the following order： HZSM-5〉SAPO-34〉MCM-41〉Y-zeolite. The highest olefins yield from bio-oil using HZSM- 5 catalyst reached 0.22 kg/kgbio-oil with carbon selectivity of 50.7% and a nearly complete bio-oil conversion. The reaction conditions and catalyst characterization were investigated in detail to reveal the relationship between the catalyst structure and the production of olefins. The comparison between the pyrolysis and catalytic pyrolysis of bio-oil was also performed.

Oxidative Desulfurization of Simulated Gasoline over Metal Oxide-loaded Molecular Sieve

A simulated gasoline consisting of model sulfur compounds of thiophene （C4H4S） and 3-methythiophene （3-MC4H4S） dissolved in n-heptane was tested for the oxidative desulfurization in the hydrogen peroxide （H202） and formic acid oxidative system over metal oxide-loaded molecular sieve. The effects of the oxidative system, loaded metal oxides, phase transfer catalyst, the addition of olefin and aromatics on sulfur removal were investigated in details. The results showed that the sulfur removal rate of simulated gasoline in the H202/formic acid system was higher than in other oxidative systems. The cerium oxide-loaded molecular sieve was found very active catalyst for oxidation of simulated gasoline in this system. The sulfur removal rates of C4H4S and 3-MC4H4S were enhanced when phase transfer catalyst （PTC） was added. However, the sulfur removal rate of simulated gasoline was reduced with the addition of olefin and aromatics.

Malus sieversii: the origin, flavonoid synthesis mechanism, and breeding of red-skinned and red-fleshed apples

Flavonoids play essential roles in human health.Apple(Malus domestica Borkh.),one of the most widely produced and economically important fruit crops in temperate regions,is a significant source of flavonoids in the human diet and is among the top nutritionally rated and most widely consumed fruits worldwide.Epidemiological studies have shown that the consumption of apples,which are rich in a variety of free and easily absorbable flavonoids,is associated with a decreased risk of various diseases.However,apple production is challenged by serious inbreeding problems.The narrowing of the hereditary base has resulted in apples with poor nutritional quality and low flavonoid contents.Recently,there have been advances in our understanding of the roles that Malus sieversii(Ledeb.)M.Roem has played in the process of apple domestication and breeding.In this study,we review the origin of cultivated apples and red-fleshed apples,and discuss the genetic diversity and construction of the core collections of M.sieversii.We also discuss current research progress and breeding programs on red-skinned and red-fleshed apples and summarize the exploitation and utilization of M.sieversii in the breeding of high-flavonoid,and red-fleshed apples.This study highlights a valuable pattern of horticultural crop breeding using wild germplasm resources.The future challenges and directions of research on the molecular mechanisms of flavonoid accumulation and high-flavonoid apple breeding are discussed.

用Sieve实现邮件过滤

Sieve是一种用来产生电子邮件过滤器的语言。为便于广大用户的使用 ,它设计得相当简单 ,但同时又内涵丰富 ,应用广泛。介绍了一种应用Sieve语言的电子邮件过滤系统。

Direct Synthesis of Dimethyl Carbonate from CO_2 and CH_3OH Using 0.4nm Molecular Sieve Supported Cu-Ni Bimetal Catalyst

The 0.4 nm molecular sieve supported Cu-Ni bimetal catalysts for direct synthesis of dimethyl carbonate (DMC) from CO 2 and CH 3 OH were prepared and investigated. The synthesized catalysts were fully characterized by BET, XRD (X-ray diffraction), TPR (temperature programmed reduction), IR (infra-red adsorption), NH 3-TPD (temperature programmed desorption) and CO 2-TPD (temperature programmed desorption) techniques. The results showed that the surface area of catalysts decreased with increasing metal content, and the metals as well as Cu-Ni alloy co-existed on the reduced catalyst surface. There existed interaction between metal and carrier, and moreover, metal particles affected obviously the acidity and basicity of carrier. The large amount of basic sites facilitated the activation of methanol to methoxyl species and their subsequent reaction with activated carbon dioxide. The catalysts were evaluated in a continuous tubular fixed-bed micro-gaseous reactor and the catalyst with bimetal loading of 20% (by mass) had best catalytic activities. Under the conditions of 393 K, 1.1 MPa, 5 h and gas space velocity of 510 h 1 , the selectivity and yield of DMC were higher than 86.0 % and 5.0 %, respectively.

Ultraselective carbon molecular sieve membrane for hydrogen purification

Hydrogen is a green clean fuel and chemical feedstock. Its separation and purification from hydrogencontaining mixtures is the key step in the production of hydrogen with high purity(>99.99%). In this work, carbon molecular sieve(CMS) membranes with ultrahigh permselectivity for hydrogen purification were fabricated by high-temperature(700–900 ℃) pyrolysis of polymeric precursor of phenolphthaleinbased cardo poly(arylene ether ketone)(PEK-C). The evolution of the microstructural texture and ultramicroporous structure and gas separation performance of the CMS membrane were characterized via TG-MS, FT-IR, XRD, TEM, CO2 sorption analysis and gas permeation measurements. CMS membranes prepared at 700 ℃ exhibited amorphous turbostratic carbon structures and high H2 permeability of 5260 Barrer with H2/CH4, H2/N2 and H2/CO selectivities of 311, 142, 75, respectively. When carbonized at900 ℃, the CMS membrane with ultrahigh H2/CH4 selectivity of 1859 was derived owing to the formation of the dense and ordered carbon structure. CMS membranes with ultrahigh permselectivity exhibit an attractive application prospect in hydrogen purification.