Binding tendency with oligonucleotides and cell toxicity of cetyltrimethyl ammonium bromide-coated single-walled carbon nanotubes

Functionalized carbon nanotubes （CNTs） were made for the delivery of genes and drugs and CNT-based biosensors. The basis of CNTs is for binding with biomolecules in biomedical applications. The binding tendency with small interfering RNA oligonucleotides and cytotoxicity of cetyltrimethyl ammonium bromide （CTAB）-coated single-walled carbon nanotubes （SWNTs） were studied. The field emission scanning electron microscopy and transmission electron microscopy results show that a SWNT suspension in CTAB solution was well-dispersed and stable. CTAB is the cross-linker between SWNTs and oligonucleotides. The CTAB-coated SWNTs have less cytotoxicity to human umbilical vein endothelial cells than single SWNTs and the cytotoxicity of CTAB-coated SWNTs depended on the concentration of CTAB-coated SWNTs.

Production of single-walled carbon nanotubes from methane over Co-Mo/MgO nanocatalyst:A comparative study of fixed and fluidized bed reactors

In this study,the performances of fixed and fluidized bed reactors in the production of single-walled carbon nanotubes（SWNTs）have been investigated.In both reactors,single-walled carbon nanotubes were grown by catalytic chemical vapor decomposition（CCVD）of methane over Co-Mo/MgO nanocatalyst under two different operating conditions.The synthesized samples were characterized by TEM,TGA and Raman spectroscopy.It is found that the performance of a fluidized bed in the synthesis of carbon nanotubes is much better than that of a fixed bed.The quality of carbon nanotubes obtained from the fluidized bed was significantly higher than that from the fixed bed and the former one with the ID/IG ratio of 0.11 while the latter one with the ID/IG ratio of 0.71.Also,the yield of SWNTs in the fluidized bed was 92 wt%,while it was 78 wt%in the fixed bed.These advantages of fluidized bed reactors for the synthesis of carbon nanotubes can be attributed to more available space for the growth of carbon nanotubes and more uniform temperature and concentration profiles.

Molecular Simulation of Hydrogen Adsorption Density in Single-Walled Carbon Nanotubes and Multilayer Adsorption Mechanism

The adsorption of hydrogen onto single-walled carbon nanotubes (SWCNTs) was studied by molecular dynamics (MD) sim'lation. It was found that the hydrogen molecules distribute regularly inside and outside of the tube. Density distribution was computed for H2 molecule. Theoretical analysis of the result showed the multilayer adsorption mechanism of SWCNTs. The storage of H2 in SWCNTs is computed, which provides essential theoretical reference for further study of hydrogen adsorption in SWCNTs.

Synthesis of nitrogen-doped single-walled carbon nanotubes and monitoring of doping by Raman spectroscopy

Nitrogen-doped single-walled carbon nanotubes （CNx-SWNTs） with tunable dopant concentrations were synthesized by chemical vapor deposition （CVD）, and their structure and elemental composition were characterized by using transmission electron microscopy （TEM） in combination with electron energy loss spectroscopy （EELS）. By comparing the Raman spectra of pristine and doped nanotubes, we observed the doping-induced Raman G band phonon stiffening and 2D band phonon softening, both of which reflect doping-induced renormalization of the electron and phonon energies in the nan- otubes and behave as expected in accord with the n-type doping effect. On the basis of first principles calculations of the distribution of delocalized carrier density in both the pristine and doped nanotubes, we show how the n-type doping occurs when nitrogen heteroatoms are substitutionally incorporated into the honeycomb tube-shell carbon lattice.

High-speed countercurrent chromatography for purification of single-walled carbon nanotubes

A new chromatographic purification of single-walled carbon nanotubes using high-speed countercurrent chromatography is reported. The purification was accomplished on the basis of experiment that dispersed the single-walled carbon nanotubes with sodium dodecyl sulfate, and the result mixture was separated using the two phase system composed of n-butanol/water = 1/1 （v/v）. The sizes of SWNTs separated were observed by scanning electron microscopy. The results demonstrated that the high-speed countercurrent chromatography possessed a good efficency for purification of single-walled carbon nanotubes.

Effects of single-walled carbon nanotubes on growth and physiological characteristics of Microcystis aeruginosa

In order to explore a novel and potential method using carbon nanotubes （CNTs） for controlling blue-green algal blooms efficiently in future, effects of single-walled carbon nanotubes （SWCNTs） on Microcystis aeruginosa growth control were investigated under lab cultured conditions. Related physiological changes were tested involving several important enzyme of antioxidant defense system （superoxide dismutase （SOD）, peroxidase （POD）, catalase （CAT）, malondiadehyde （MDA）, photosynthetic pigments, protein, soluble sugar and extracellular microcystin toxins （MC-LR））. Algal cell density was significantly inhibited by SWCNTs at high concentration （〉5.00 mg/L）, and the inhibition rate was dose-dependent. For treatment with 100 mg/L SWCNTs, the inhibitory rates even reached above 90%. 96 h IC50 was determined as 22 mg/L. Antioxidant enzyme activities were dramatically dropped with increasing lipid peroxidation at higher SWCNTs concentration, indicating intracellular generation of reactive oxygen species （ROS） and oxidative stress damage in algae. Reduction of photosynthetic pigments, soluble sugar and protein contents suggested that SWCNTs may severely ruin algal photosynthesis system, destroy the metabolism-related structure of cell, and thus lead to negative physiological status in M. aeruginosa. Besides, SWCNTs can effectively decrease the amount of extracellular microcystins in culture medium.

Density Functional Theory Study of MoO_3 Molecule Encapsulated inside Single-walled Carbon Nanotubes

The binding energies, geometric structures and electronic properties of molybde- num trioxide （MOO3） molecule encapsulated inside （8, 0）, （9, 0）, （10, 0） and （14, 0） single-walled carbon nanotubes （SWNTs） have been investigated using density functional theory （DFT） method. Due to curvature effect, the calculated binding energy values are different, the variation of which indicated that the stability of MoO3/SWNT systems increases with increasing the radius of SWNTs. At the same time, owing to the presence of MoO3 molecule, the band gap of MoO3/SWNTs systems decreases. The analysis of density of states （DOS） reveals hybridization between C-2p and Mo-4d and between C-2p and O-2p orbitals near the Fermi level, which results in electron transfer from SWNTs to MoO3 molecule. The present computations suggest that electronic properties of SWNTs can be modified by doping MoO3 molecule.

Size-dependent sinusoidal beam model for dynamic instability of single-walled carbon nanotubes

In this study, a model for dynamic instability of embedded single-walled car- bon nanotubes （SWCNTs） is presented. SWCNTs are modeled by the sinusoidal shear deformation beam theory （SSDBT）. The modified couple stress theory （MCST） is con- sidered in order to capture the size effects. The surrounding elastic medium is described by a visco-Pasternak foundation model, which accounts for normal, transverse shear, and damping loads. The motion equations are derived based on Hamilton＇s principle. The differential quadrature method （DQM） in conjunction with the Bolotin method is used in order to calculate the dynamic instability region （DIR） of SWCNTs. The effects of differ- ent parameters, such as nonlocal parameter, visco-Pasternak foundation, mode numbers, and geometrical parameters, are shown on the dynamic instability of SWCNTs. The re- sults depict that increasing the nonlocal parameter shifts the DIR to right. The results presented in this paper would be helpful in design and manufacturing of nano-electromechanical system （NEMS） and micro-electro-mechanical system （MEMS）.

Research on the Relationship between Density of States and Conducting Properties of Single-walled Carbon Nanotubes

The analytical expression of the electronic density of states (DOS) for single-walled carbon nanotubes (SWNTs) has been derived on the basis of graphene approximation of the energy E(k) near the Fermi level EF. The distinctive properties of the DOS, the normalized differential conductivity and the current us bias for SWNTs are deduced and analyzed theoretically. The singularities in the DOS (or in the normalized differential conductivity) predict that the jump structure of current (or conductance)-bias of SWNTs exists. All conclusions from the theoretical analysis are in well agreement with the experimental results of SWNT's electronic structure and electronic transport. In other words, the simple theoretical model in this paper can be applied to understand a range of spectroscopic and other measurement data related to the DOS of SWNTs.

High-energy pulse generation using Yb-doped Q-switched fiber laser based on single-walled carbon nanotubes

An all-fiber laser using a single-walled carbon nanotube（SWCNT） as the saturable absorber（SA） for Q-switched operation in the 1031 nm region is demonstrated in this work. A lasing threshold as low as 17 mW was realized for continuous wave operation. By further increasing the pump power, stable Q-switched pulse trains are obtained when the pump power ranges from 38 mW to 125 mW, corresponding to repetition rate varying from 40.84 kHz to 66.24 kHz, the pulse width from 2.0 μs to 1.0 μs,and the highest single pulse energy of 40.6 nJ respectively.

A study of single-walled carbon nanotubes modified by organics of the phthalocyanine category

Organics of the phthalocyanine category have very good nonlinear optical properties. The single-walled carbon nanotubes were modified by using the phenoxy phthalocyanine. Characterization analysis was made by means of the transmission electron microscope (TEM), ultraviolet visible absorptive spectra, fluorescent spectra and Raman spectra. Under the TEM, it was observed that the composite looked like sugarcoated haws. By comparing the ultraviolet visible absorptive spectra before and after absorption, it was disclosed that the spectral intensity and the intensity of the peaks in the fluorescent spectra dropped remarkably. This shows that the single-walled carbon nanotubes have absorbed a large number of phenoxy phthalocyanines. Raman analysis revealed that in the Raman spectra, the position of the main peaks of the single-walled carbon nanotubes after absorption moved in the direction of long waves. The analysis suggests that the movement of the Raman spectra results from the change in the state of the single-walled carbon nanotubes before and after absorption.

Single-Walled Carbon Nanotubes for Flexible Electronics and Sensors

This article reviews the use of electronic quality single-walled carbon nanotubes grown via chemical vapor deposition （CVD） approaches at high temperatures as building blocks for fabricating flexible field-effect devices, such as thin-film transistors （TFTs） and chemical sensors. Dry transfer printing technique is developed for forming films of CVD nanotubes on low-temperature plastic substrates. Examples of TFTs with the use of nanotubes and thin dielectrics and hydrogen sensors with the use of nanotubes decorated with palladium nanoparticles are discussed in detail to demonstrate the promising potentiality of single-walled carbon nanotubes for building high performance flexible devices, which can find applications where traditional devices on rigid substrates are not suitable.

Aligned single-walled carbon nanotubes array electrode:Fabrication,characterization and application

In the presence of 1-（3-dimethylaminopropyl）-3-ethylcarbodiimide hydrochloride （EDC） and N-hydroxysuccinimide （NHS）, carboxylic group-functionalized single-walled carbon nanotubes （SWNTs） were assembled vertically on the glassy carbon electrode using ethylenediamine as linking agent to fabricate an aligned electrode （SWNTE）. The morphological characteristic was studied with atomic force microscope （AFM） and its electrochemical property was investigated using K3[Fe（CN）6] as probe. ssDNA had a sensitive voltammetric response at the SWNTE and the oxidative peak potentials of guanine base and adenine base were 0.608 Vand 0.896 V, respectively. Under the optimal conditions, the DPV peak current of guanine base vs. the concentration of ssDNA was linear in the range of 5.4 μg/L-10.8 mg/L with a detection limit of 1 μg/L （S/N = 3）.

Parametric instabilities in single-walled carbon nanotubes

Parametric instabilities induced by the coupling excitation between the high frequency quantum Langmuir waves and the low frequency quantum ion-acoustic waves in single-walled carbon nanotubes are studied with a quantum Zakharov model. By linearizing the quantum hydrodynamic equations, we get the dispersion relations for the high frequency quantum Langmuir wave and the low frequency quantum ion-acoustic wave. Using two-time scale method, we obtain the quantum Zaharov model in the cylindrical coordinates. Decay instability and four-wave instability are discussed in detail. It is shown that the carbon nanotube＇s radius, the equilibrium discrete azimuthal quantum number, the perturbed discrete azimuthal quantum number, and the quantum parameter all play a crucial role in the instabilities.

Energy Absorption Characteristics of Single-walled Carbon Nanotubes

The excellent mechanical properties of carbon nanotubes make them potential candidates for engineering application. In this paper, the impact and failure behaviors of single-walled carbon nanotubes （SWCNTs） are investigated. The effects of diameter, length, and chirality on their energy absorption characteristics under lateral impact and axial crush are studied. By integrating the principle of molecular structural mechanics （MSM） into finite element method （FEM）, the locations and directions of fracture process can be predicted. It is shown that the specific energy absorption （SEA） of SWCNTs is 1-2 order of magnitude higher than that of the ordinary metallic materials and composites in axial impact, indicating that carbon nanotubes are promising energy absorption materials for engineering applications.

Instability of single-walled carbon nanotubes conveying Jeffrey fluid

We report instability of the single-walled carbon nanotubes(SWCNT) filled with non-Newtonian Jeffrey fluid.Our objective is to get the influences of relaxation time and retardation time of the Jeffrey fluid on the vibration frequency and the decaying rate of the amplitude of carbon nanotubes.An elastic Euler-Bernoulli beam model is used to describe vibrations and structural instability of the carbon nanotubes.A new vibration equation of an SWCNT conveying Jeffrey fluid is first derived by employing Euler-Bernoulli beam equation and Cauchy momentum equation taking constitutive relation of Jeffrey fluid into account.The complex vibrating frequencies of the SWCNT are computed by solving a cubic eigenvalue problem based upon differential quadrature method(DQM).It is interesting to find from computational results that retardation time has significant influences on the vibration frequency and the decaying rate of the amplitude.Especially,the vibration frequency decreases and critical velocity increases with the retardation time.That is to say,longer retardation time makes the SWCNT more stable.

Effect of a Nerve Graft Substitute Single-walled Carbon Nanotubes on Rat Pheochromocytoma Cells

Carbon nanotubes （CNTs） were extensively explored for their beneficial use in nervous system tissue engineering. However, an important concern regarding the use of CNTs is their toxicity during the interaction between cells and the nano particles. The rat pheochromocytoma cell line （PC12） was co-cultured with three types of single-walled carbon nanotubes （SWNTs）, purified raw SWNTs （C）, hydroxyl purified SWNTs （C-OH） and carboxyl purified SWNTs （C-COOH） at 25 μg/mL and 100 μg/ml. The experimental results revealed that SWNTs at the concentration below 100 μg/mL did not affect the cell viability. Notably, powerful antioxidant system in nerous system tissue is able to counteract with the toxicity of CNTs, which is characterized by the prominently enhanced expression of main antioxidant enzymes （catalase （CAT）, superoxide dismutase （SOD）, glutathione peroxidase （GPx） and glutathione-S-transferase （GST））. Therefore, we believe that CNTs can be good candidates for the fabrication of biomedical scaffolds for the nerve tissue repair.

Theoretical Study on the Reaction Mechanism between Dichlorocarbene and Armchair Single-walled Carbon Nanotubes

The reaction mechanism between CC12 and armchair single-walled carbon nanotubes （ASWCNTs） （3,3） and （4,4） has been studied by semiempirical AM1 and ab initio methods. The activation barriers of CC12 adding to ASWCNT （3,3） and （4,4） are computed and compared. The lower barrier of CC12 forms cycloaddition isomer on （3,3） maybe because the strain energy of （3,3） is larger than that of （4,4）. Our theoretical results are consistent with the experimental results.

Alignment of Nanoscale Single-Walled Carbon Nanotubes Strands

Depositing single-walled carbon nanotubes(SWNTs) with controllable density, pattern and orientation on electrodes presents a challenge in today's research. Here, we report a novel solvent evaporation method to align SWNTs in patterns having nanoscale width and micronscale length. SWNTs suspension has been introduced dropwise onto photoresist resin microchannels; and the capillary force can stretch and align SWNTs into strands with nanoscale width in the microchannels. Then these narrow and long aligned SWNTs patterns were successfully transferred to a pair of gold electrodes with different gaps to fabricate carbon nanotube field-effect transistor(CNTFET). Moreover, the electrical performance of the CNTFET show that the SWNTs strands can bridge different gaps and fabricate good electrical performance CNTFET with ON/OFF ratio around 106. This result suggests a promising and simple strategy for assembling well-aligned SWNTs into CNTFET device with good electrical performance.

Synthesis and Hydrogen Storage in Single-walled Carbon Nanotubes

Single-walled carbon nanotubes (SWNTs) were synthesized by a hydrogen arc discharge method. A high yield of gram quantity of SWNTs per hour was achieved. Tow kinds of SWNT products: web-like substance and thin films in large slices were obtained. Results of resonant Raman scattering measurements indicate that the SWNTs prepared have a wider diameter distribution and a larger mean diameter. Hydrogen uptake measurements of the two kinds of SWNT samples (both as prepared and pretreated) were carried out using a high pressure volumetric method, respectively. And a hydrogen storage capacity of 4 wt pct could be repeatedly achieved for the suitably pretreated SWNTs, which indicates that SWNTs may be a promising hydrogen storage material.