Topology optimization of chiral metamaterials with application to underwater sound insulation

Chiral metamaterials have been proven to possess many appealing mechanical phenomena,such as negative Poisson's ratio,high-impact resistance,and energy absorption.This work extends the applications of chiral metamaterials to underwater sound insulation.Various chiral metamaterials with low acoustic impedance and proper stiffness are inversely designed using the topology optimization scheme.Low acoustic impedance enables the metamaterials to have a high and broadband sound transmission loss(STL),while proper stiffness guarantees its robust acoustic performance under a hydrostatic pressure.As proof-of-concept demonstrations,two specimens are fabricated and tested in a water-filled impedance tube.Experimental results show that,on average,over 95%incident sound energy can be isolated by the specimens in a broad frequency range from 1 k Hz to 5 k Hz,while the sound insulation performance keeps stable under a certain hydrostatic pressure.This work may provide new insights for chiral metamaterials into the underwater applications with sound insulation.

Optimization for sound insulation of a sandwich plate with a corrugation and auxetic honeycomb hybrid core

A sandwich plate with a corrugation and auxetic honeycomb hybrid core is constructed,and its sound insulation and optimization are investigated.First,the motion governing equation of the sandwich plate is established by the third-order shear deformation theory(TSDT),and then combined with the fluid-structure coupling conditions,and the sound insulation is solved.The theoretical results are validated by COMSOL simulation results,and the effects of the structural parameter on the sound insulation are analyzed.Finally,the standard genetic algorithm is adopted to optimize the sound insulation of the sandwich plate.

The Evaluation of the Sound Insulation of Partition in Expanded Frequency Range

This paper reports on an evaluation of airborne sound insulation in a wider frequency range then is used in classical measurements. For analyzing sound insulation was used frequency range from 50 Hz to 10 kHz via standard range I00 Hz to 3,15 kHz. For four constructions with different structure was measured sound reduction index depend on frequency and calculated Weighted sound reduction index according to EN ISO 717-1. Then the results were compared. The measurements were made for samples of construction with different sizes. The results of measurements show how the size of sample influence on measured sound insulation. This article could be useful for specialist of architect acoustic and all who interest in sound insulation.

Towards experimental studying the airborne sound insulation of light frame walls with staggered studs

Light frame walls(LFWs) serve as common partition walls in prefabricated buildings due to their lightweight nature, costeffectiveness, energy efficiency, and adaptability for rapid on-site assembly. However, their acoustic insulation capability is hindered by issues such as sound bridges, resonance, and coincidence dips, resulting in inadequate sound insulation. This study aims to propose LFW designs with superior acoustic insulation suitable for practical engineering while meeting prevailing national standards. Nine full-scale LFW configurations were subjected to laboratory testing to evaluate the impact of staggered stud arrangements, stud types, and incorporation of compounded materials. The tests were performed between 100 and 5000 Hz,and the sound pressure level and reverberation time at 1/3 octave band were measured and used to calculate the weighted sound insulation index(Rw). Results demonstrated that the outlined design modifications significantly enhanced the sound insulation of the LFW. These modifications effectively mitigate the influence of sound bridges while addressing resonance and coincidence dips inherent in the wall system. Particularly noteworthy was the superior sound insulation achieved by staggered-stud LFWs with compounded materials, surpassing that of autoclaved lightweight concrete walls commonly used in prefabricated constructions despite having lesser thickness and surface density. Rwvalues increased from 43 to 54 dB compared to conventional LFWs, translating to a notable elevation in airborne sound insulation level from 4 to 7 as an internal separation component,meeting the requisite standards for most applications.

Optimization of Sound Absorption and Insulation Performances of a Dual-Cavity Resonant Micro-Perforated Plate

This study investigates a dual-cavity resonant composite sound-absorbing structure based on a micro-perforated plate.Using the COMSOL impedance tube model,the effects of various structural parameters on sound absorption and sound insulation performances are analyzed.Results show that the aperture of the micro-perforated plate has the greatest influence on the sound absorption coefficient;the smaller the aperture,the greater is this coefficient.The thickness of the resonance plate has the most significant influence on the sound insulation and resonance frequency;the greater the thickness,the wider the frequency domain in which sound insulation is obtained.In addition,the effect of filling the structural cavity with porous foam ceramics has been studied,and it has been found that the porosity and thickness of the porous material have a significant effect on the sound absorption coefficient and sound insulation,while the pore size exhibits a limited influence.

Sound Insulation Performance of Structural Wood Wall Integrated with Wood Plastic Composite

The sound insulation performance is an important technical index for evaluating the physical property of the building wall.Three kinds of structural wood walls integrated with wood plastic composite(WPC)were designed.And the sound insulation performance of the walls was studied.The results showed that for the wall that constructed by the WPC as the wall studs,compared with the one that constructed by the pine wood as the wall studs,the deviation of their sound insulation was lower than±3 dB.The wall’s external panel material had significant effect on the wall’s sound insulation property,and the contribution of the wood-plastic panel to the sound insulation was much higher than that of the polyvinyl chloride(PVC)plastic hanging board.The surrounding sealing quality of the wall’s external panel material had an important influence on the sound insulation effect of the building wall,and the panel of the wood plastic interior wall had less influence on the sound insulation performance of the wall.Taking the sound-absorbing cotton or non-woven fabric as elastic strips was an effective technical measure to improve the sound insulation performance of the walls.The sound insulation was improved by 2.4 dB and 3.1dB respectively after the correction of pink noise spectrum,and increased by 2.8 dB and 3.6 dB respectively after the correction of traffic noise spectrum.

Analysis of Soundproof Technology of Assembled Steel Structure Houses

The problem of noise has always been highlighted in assembled steel structure houses.Therefore,it is necessary to use effective soundproof measures where steel beams intersect with the reserved line pipe openings,doors,windows,elevator shafts,and other locations.In this paper,we will investigate the areas with subpar soundproof performance in an assembled steel structure residential project and propose suitable noise control measures to address this issue.

EXPERIMENTAL STUDY OF ACOUSTICAL INSULATION OF CEMENT-BASED BOARD PREPARED WITH WASTE COCONUT COIR AND OIL PALM FIBERS

Among the major challenges facing the modern era of technological and industrial advancements are pollution and exponentially growing energy consumption.Pollution continues to be a menace affecting different aspects of life such as health,productivity,and comfort.This paper focuses on the elimination or reduction of sound pollution in buildings using cement-based boards made from pretreated coconut coir and oil palm fibers obtained from agricultural residues.The study includes an account of the preparation of fiber cement boards made from Portland cement Type 1,limestone powder,water,sand,and pretreated coconut coir and oil palm fibers at 5,10,15,and 20%by weight of powder materials,respectively,and a high-range water reducer in order to make sure that the natural materials would be spread in an even way throughout the specimens.Sound insulation tests were performed as key indicators of the performance of the fiber cement boards.It was found that an increase in the proportion of natural materials resulted in fiber cement boards with decreased density,compressive strength,and flexural strength.Furthermore,in relation to both physical and mechanical performance,the boards incorporating coconut fibers were superior to those incorporating oil palm fibers.With an increased proportion of natural fibers,sound insulation performance tended to improve.The boards prepared with coconut coir and oil palm fibers in this study yielded acceptable physical and mechanical properties and showed promise in relation to providing insulative protection against sound.

Symplectic analysis for elastic wave propagation in two-dimensional cellular structures

On the basis of the finite element analysis, the elastic wave propagation in cellular structures is investigated using the symplectic algorithm. The variation principle is first applied to obtain the dual variables and the wave propagation problem is then transformed into two-dimensional （2D） symplectic eigenvalue problems, where the extended Wittrick-Williams algorithm is used to ensure that no phase propagation eigenvalues are missed during computation. Three typical cellular structures, square, triangle and hexagon, are introduced to illustrate the unique feature of the symplectic algorithm in higher-frequency calculation, which is due to the conserved properties of the structure-preserving symplectic algorithm. On the basis of the dispersion relations and phase constant surface analysis, the band structure is shown to be insensitive to the material type at lower frequencies, however, much more related at higher frequencies. This paper also demonstrates how the boundary conditions adopted in the finite element modeling process and the structures＇ configurations affect the band structures. The hexagonal cells are demonstrated to be more efficient for sound insulation at higher frequencies, while the triangular cells are preferred at lower frequencies. No complete band gaps are observed for the square cells with fixed-end boundary conditions. The analysis of phase constant surfaces guides the design of 2D cellular structures where waves at certain frequencies do not propagate in specified directions. The findings from the present study will provide invaluable guidelines for the future application of cellular structures in sound insulation.

Low frequency acoustic properties of bilayer membrane acoustic metamaterial with magnetic oscillator

A bilayer membrane acoustic metamaterial was proposed to overcome the influence of the mass law on traditional acoustic materials and obtain a lightweight thin-layer structure that can effectively isolate low frequency noise. The finite element analysis（FEA） results agree well with the experimental results.It is proved that the sound transmission losses（STLs） of the proposed structures are higher than those of same surface density acoustic materials. The introduction of the magnetic mass block is different from the traditional design method, in which only a passive mass block is fixed on the membrane. The magnetic force will cause tension in the membrane, increase membrane prestress, and improve overall structural stiffness. The effects of the geometry size on the STLs are discussed in detail. The kind of method presented in this paper can provide a new means for engineering noise control.

Numerical Simulation and Experimental Study of Underwater Compound Structures Containing Honeycomb Interlayer

Honeycomb interlayer structure sound wave transferring theory of infinite is introduced into the underwater noise control. Based on the layered elastic or viscoelastic medium, the sound insulation property of a normal incidence plane wave on underwater honeycomb interlayer structure is studied by using the method of the transfer matrix and percentage distribution of sound energy in As a particular kind of complex multilayered rubber compound structures, honeycomb different areas. compound structure has better sound insulation property than rubber interlayer with cylindrical cavities compound structure. Simulation results show that the property of rubber material has great effect on structural sound insulation. Soft and small Poisson＇ s ratio rubber can obviously improve sound insulation performance of the whole structure. Furthermore, the material property of the face layer of the honeycomb interlayer structure has greater effects on the insulation performance. To validate the theoretical analysis, large samples of freedom-field measurement of honeycomb sandwich compound structure is carried out in the anechoic water tank of our university. The measurement result is in good agreement with the theoretical prediction.

Acoustic properties of closed-cell aluminum foams with different macrostructures

As structural materials, closed-cell aluminum foams possess obvious advantages in product dimension, strength and process economics compared with open cell aluminum foams. However, as a kind of structure-function integration materials, the application of closed-cell aluminum foams has been restricted greatly in acoustic fields due to the difficulty of sound wave penetration. It was reported that closed-cell foams with macrostructures have important effect on the propagation of sound waves. To date, the relationship between macrostructures and acoustic properties of commercially pure closedcell aluminum foams is ambiguous. In this work, different perforation and air gap types were designed for changing the macrostructures of the foam. Meanwhile, the effect of macrostructures on the sound absorption coefficient and sound reduction index were investigated. The results showed that the foams with half-hole exhibited excellent sound absorption and sound insulation behaviors in high frequency range（〉2500 Hz）. In addition, specimens with air gaps showed good sound absorption properties in low frequency compared with the foams without air gaps. Based on the experiment results, propagation structural models of sound waves in commercially pure closed-cell aluminum foams with different macrostructures were built and the influence of macrostructures on acoustic properties was discussed.

Improving operation lifetime of OLED by using thermally activated delayed fluorescence as host

We fabricated organic light-emitting diodes （OLEDs） with the thermally activated delayed fluorescence （TADF） mate- rial of 4CzlPN, Which show better stability compared with the 4,4＇-Bis（carbazol-9-yl）biphenyl （CBP） based devices. The half lifetime of the device using 4CzlPN as host material has doubled, and a slower voltage rise compared with that of CBP-based devices has been achieved, which indicates the improvement of stability. We attribute the better sta- bility to the good film morphology and difficult crystallization property of 4CzlPN. Our results suggest that employing the 4CzlPN as host material can be a promising way of fabricating OLEDs with longer operation lifetime.