An Efficient MMI SOI Splitter with Multimode Input/Output Waveguides

A 1×8 multimode interference power splitter with multimode input/output waveguides in SOI material is designed by the beam propagation method and fabricated by the inductive coupled plasma etching technology for use in fiber optics communication systems.The fabricated device exhibits low loss and good coupling uniformity.The excess loss is lower than 0 8dB,and the uniformity is 0 45dB at the wavelength of 1550nm.Moreover,the polarization dependent loss is lower than 0 7dB at 1550nm.The device size is only 2mm×10mm.

Multimode Interference Optical Power Splitter in Proton-Exchange LiNbO_3 Waveguides

The self imaging effect in graded index waveguides using annealed proton exchange (APE) technique in lithium niobate (LiNbO 3) waveguides is analyzed and simulated using the three dimensional nonparaxial beam propagation method (BPM).On this basis,a 1×8 multimode interference (MMI) optical power splitter by APE technique in X cut LiNibO 3 with Y propagation substrate is fabricated.Measurements show that the device has realized eight powers splittings.

Novel Even Beam Splitters Based on Subwavelength Binary Simple Periodic Rectangular Structure

In this paper, a novel method of a subwavelength binary simple periodic rectangular structure is presented to realize even beam splitting by combining the rigorous couple-wave analysis with the genetic algorithm. Several even splitters in the terahertz region were designed and one of the silicon-based beam splitters designed to separate one incident beam into four emergent beams has total efficiency up to 92.23 %. Zero-order diffraction efficiency was reduced to less than 0.192 % and the error of uniformity decreased to 6.51 9 10-6. These results break the limitation of even beam splitting based on the traditional scalar theory. In addition, the effects of the incident angle, wavelength, as well as the polarizing angle on the diffraction efficiency and uniformity were also investigated.

Optimal design of sub-wavelength metal rectangular gratings for polarizing beam splitter based on effective medium theory

A novel optimal design of sub-wavelength metal rectangular gratings for the polarizing beam splitter （PBS） is proposed. The method is based on effective medium theory and the method of designing single layer antireflection coating. The polarization performance of PBS is discussed by rigorous couple-wave analysis （RCWA） method at a wavelength of 1550 nm. The result shows that sub-wavelength metal rectangular grating is characterized by a high reflectivity, like metal films for TE polarization, and high transmissivity, like dielectric films for TM polarization. The optimal design accords well with the results simulated by RCWA method.

EFFECTS OF SPLITTER BLADES ON THE LAW OF INNER FLOW WITHIN CENTRIFUGAL PUMP IMPELLER

Analysis on the inner flow field of a centrifugal pump impeller with splitter blades is carfled out by numerical simulation. Based on this analysis, the principle of increasing pump head and efficiency are discussed. New results are obtained from the analysis of turbulence kinetic energy and relative velocity distribution： Firstly, unreasonable length or deviation design of the splitter blades may cause great turbulent fluctuation in impeller channel, which has a great effect on the stability of impeller outlet flow; Secondly, it is found that the occurrence of flow separation can be decreased or delayed with splitter blades from the analysis of blade loading; Thirdly, the effect of splitter blades on reforming the structure of ＂jet-wake＂ is explained from the relative velocity distribution at different flow cross-sections, which shows the flow process in the impeller. The inner flow analysis verifies the results of performance tests results and the PIV test.

Numerical simulation of cavitation turbulence in Francis turbine runner with splitter blades

Cavitation will reduce the turbine performance and even damage the turbine components.To verify the effects of splitter blades on improving the cavitation performance,the cavitation flow inside a Francis turbine runner with splitter blades was numerically simulated by using the Singhal cavitation model and the standard k-ε turbulence model.The distributions of static pressure and gas volume fractions on the surface of the runner blades were predicated under different conditions,and the cavitation in the flow field of the runner was analyzed.The results show that the static pressure and gas volume fractions are more uniformly distributed on the short blades than those on the long blades in Francis turbines with splitter blades,and there is almost no cavitation on the short blades;their distributions are more uniform under small flow conditions than those under large flow conditions;and large gas volume fractions are concentrated at the outlet tip near the band on the suction side of the long blade.The installation of splitter blades can improve the cavitation performance of conventional Francis turbines.

Performance measurement of broadband, wide-angle polarizing beam splitter

Polarizing beam splitter (PBS) is a critical optical component in projection display system because PBS performance greatly influences the contrast and brightness of the system. PBS performance is usually measured by spectrophotometer after coating and cementing, but the measured result cannot represent the actual performance in practice because people usually change the incident angle in one plane (horizontal plane) and do not consider the other plane (vertical plane). Geometrical polarization rotation occurring at reduced F-number influences the measuring precision of s-polarization transmittance (Ts) and p-polarization reflectance (Rp). A more accurate and practical way to measure the performance of broadband, wide-angle PBS is presented in this paper.

Designing of a polarization beam splitter for the wavelength of 1310 nm on dual-core photonic crystal fiber with high birefringence and double-zero dispersion

We have proposed a novel kind of photonic crystal fiber which contains two asymmetric cores. The bireti＇ingence and the dispersion are numerically analyzed based on finite element method when the size of the air holes and the pitch of two adjacent air holes are changed. It is shown that the proposed photonic crystal fiber has high birefringence up to the order of 10-2 and double-zero dispersion points are at the wavelengths of 1310 nm and 800 rim, simultaneously. At the same time, the normalized power and the extinction ratios of the proposed photonic crystal fiber have been simulated. It is demonstrated that, at the wavelength of 1310 rim, the x-polarized mode and the y-polarized mode are separated when the propagation distance is 2.481 ram.

Demonstration of a cold atom beam splitter on atom chip

We report an experimental demonstration of a new scheme to split cold atoms on an atom chip. The atom chip consists of a U-wire and a Z-wire. The cold atom cloud is initially loaded and prepared in the Z-trap, which is split into two separate parts by switching on the current of the U-wire. The two separate atom clouds have a distance more than one millimeter apart from each other and show almost symmetrical profiles, corresponding to about a 50/50 splitting ratio.

Security of quantum key distribution using two-mode squeezed states against optimal beam splitter attack

For the beam splitter attack strategy against quantum key distribution using two-mode squeezed states, the analytical expression of the optimal beam splitter parameter is provided in this paper by applying the Shannon information theory. The theoretical secret information rate after error correction and privacy amplification is given in terms of the squeezed parameter and channel parameters. The results show that the two-mode squeezed state quantum key distribution is secure against an optimal beam splitter attack.

Design of a polarization splitter for an ultra-broadband dual-core photonic crystal fiber

A novel ultra-broadband polarization splitter based on a dual-core photonic crystal fiber(DC-PCF)is designed.The full-vector finite element method and coupled-mode theory are employed to investigate the characteristics of the polarization splitter.According to the numerical results,a graphene-filled layer not only broadens the working bandwidth but also reduces the size of the polarization splitter.Furthermore,the fluorine-doped region and the germanium-doped region can broaden the bandwidth.Also,the 4.78 mm long polarization splitter can achieve an extinction ratio of-98.6 d B at a wavelength of 1550 nm.When extinction ratio is less than-20 d B,the range of the wavelength is 1027 nm-1723 nm with a bandwidth of 696 nm.Overall,the polarization splitter can be applied to all-optical network communication systems in the infrared and near-infrared wavelength range.

A Research on the Flow Characteristics of a Splitter-Based Water Cooling System for Computer Boards

The splitter is an important component of water-based cooling systems used to extract heat from computer boards.In the present study,the flow characteristics of a 16-splitter structure were numerically simulated and compared with experimental results to verify the reliability of the numerical simulation method.Accordingly,the concept of splitter structural coefficients was proposed.Based on the results of this study,we recommend a selection range of 5≤k≤6 for the structure factor k of the splitter;after optimization,the maximum deviation of the splitter outlet flow was reduced from the original value of 100%to 8.3%.

Numerical Investigation on the Secondary Flow Control by Using Splitters at Different Positions with Respect to the Main Blade

In turbomachinery,strong secondary flow can produce significant losses of total pressure near the endwall and reduce the efficiency of the considered turbomachine.In this study,splitters located at different positions with respect to the main blade have been used to reduce such losses and improve the efficiency of the outlet guide vane(OGV).Three different relative positions have been considered assuming a NACA 65-010 profile for both the main blade and the splitter.The numerical results indicate that splitters can effectively reduce the total pressure loss by suppressing the secondary flow around the main blade,but the splitters themselves also produce flow losses,which are caused by flow separation effects.

Design, Simulation &Optimization of 2D Photonic Crystal Power Splitter

A very compact (80 - 100 μm2) integrated power splitting devices with two outputs (1 × 2), four outputs (1 × 4) and six outputs (1 × 6) channel has been designed, simulated and optimized for Telecommunication purpose with T-Junction, Y-Junction, PC line defect waveguides integrated with multimode interference block (PCLD-MMI) and multiple line defect PC waveguides (MLDPCW) configurations. The optical modeling of these proposed structures was investigated by finite difference time domain (FDTD) simulation. With the optimization of the parameters (Hole Radius, R = 0.128 μm, Input Diameter, D = 1.02 μm, Input wavelength, λ = 1.55 μm, Substrate Reflective Index, nsub = Si(1.52), Photonic Crystal Material, npcs = InAs(3.45), and Rectangular crystal structure), 1 × 2 for Y-Junction (100%), 1 × 4 for T-Junction (92.8%) and 1 × 6 configuration for MLDPCW (81%) show maximum power transmission.

Attacking a high-dimensional quantum key distribution system with wavelength-dependent beam splitter

The unconditional security of quantum key distribution(QKD) can be guaranteed by the nature of quantum physics.Compared with the traditional two-dimensional BB84 QKD protocol, high-dimensional quantum key distribution(HDQKD) can be applied to generate much more secret key.Nonetheless, practical imperfections in realistic systems can be exploited by the third party to eavesdrop the secret key.The practical beam splitter has a correlation with wavelength,where different wavelengths have different coupling ratios.Using this property, we propose a wavelength-dependent attack towards time-bin high-dimensional QKD system.What is more, we demonstrate that this attacking protocol can be applied to arbitrary d-dimensional QKD system, and higher-dimensional QKD system is more vulnerable to this attacking strategy.

Radio-frequency design of a new C-band variable power splitter

A novel variable C-band radio-frequency (RF) power splitter was designed at Shanghai Institute of Applied Physics, Chinese Academy of Sciences. Using three RF impedance combiners, an H-bend, and an RF polarizer, this new power splitter is much more compact than a traditionally designed splitter, which comprises three 3-dB hybrids. The parameters were optimized to achieve good matching and minimize reflection. Here, the RF design of the new C-band variable power splitter is presented.

Design of terahertz beam splitter based on surface plasmon resonance transition

According to the resonance transition between propagating surface plasmon and localized surface plasmon, we demonstrate a design of beam splitter that can split terahertz wave beams in a relatively broad frequency range. The transmission properties of the beam splitter are analyzed utilizing the finite element method. The resonance transition between two kinds of plasmons can be explained by a model of coherent electron cloud displacement.

Maximal entanglement from photon-added nonlinear coherent states via unitary beam splitters

In this paper, we construct photon-added f-deformed coherent states （PAf-DCSs） for nonlinear bosonic fields by discussing Klauder＇s minimal set of conditions required to obtain coherent states. Using this set of nonlinear states, we propose a very useful scheme for generating the maximal amount of entanglement via unitary beam splitters for different strength regimes of the input field α, deformation q and excitation number m. Therefore, the possibility to create highly entangled states and to control the entanglement is proposed. Moreover, the condition for a maximal and separable output beam state is obtained. Finally, we examine the statistical properties of the PAf-DCSs through the Mandel parameter and exploit a connection between this quantity and the behavior variation of the output state entanglement. Our result may open new perspectives in different tasks of quantum information processing.

Broadband non-polarizing beam splitter based on guided mode resonance effect

A broadband non-polarizing beam splitter （NPBS） operating in the telecommunication C＋L band is designed by using the guided mode resonance effect of periodic silicon-on-insulator （SOI） elements. It is shown that this double layer SOI structure can provide ~50/50 beam ratio with the maximum divergences between reflection and transmission being less than 8% over the spectrum of 1.4μm-l.7 μm and i% in the telecommunication band for both TE and TM polarizations. The physical basis of this broadband non-polarizing property is on the simultaneous excitation of the TE and TM strong modulation waveguide modes near the designed spectrum band. Meanwhile, the electric field distributions for both TE and TM polarizations verify the resonant origin of spectrum in the periodic SOI structure. Furthermore, it is demonstrated with our calculations that the beam splitter proposed here is tolerant to the deviations of incident angle and structure parameters, which make it very easy to be fabricated with current IC technology.

Spin-dependent quantum transport through an Aharonov-Bohm structure spin splitter

Using the tight-binding model approximation, this paper investigates theoretically spin-dependent quantum transport through an Aharonov-Bohm （AB） interferometer. An external magnetic field is applied to produce the spinpolarization and spin current. The AB interferometer, acting as a spin splitter, separates the opposite spin polarization current. By adjusting the energy and the direction of the magnetic field, large spin-polarized current can be obtained.