Polymer blends of cold water soluble starches (amylose or amylopectin soluble starch) with gelatin were prepared using solvent casting method. The solid state miscibility and polymer-polymer interactions between the c...Polymer blends of cold water soluble starches (amylose or amylopectin soluble starch) with gelatin were prepared using solvent casting method. The solid state miscibility and polymer-polymer interactions between the constituent polymers were studied by fourier transforms infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorirmetry (DSC), light optical microscopy (OP) and scanning electron microscopy (SEM), whereas the thermal stability of the blends was studied by thermogravimetric analysis (TGA). Furthermore, tensile and water vapor barrier properties of the blends were assessed. The obtained results exhibited that gelatin was more miscible with amylose soluble starch than with amylopectin soluble starch. Moreover, enhancing mechanical and water barrier properties of amylose soluble starch/gelatin blends were more pronounced than those of amylopectin soluble starch/gelatin blends. Generally, tensile strength (TS) and Elongation percentage (E) of the blend films were found to be gradually increased with increasing the proportion of gelatin. Nevertheless, increasing starch proportion was in favor of decreasing water vapor permeability (WVP). At equal proportions of starch and gelatin (1:1), TS was raised up to 8.69 MPa for amylose soluble starch/gelatin blend films while it raised up to 4.96 MPa for amylopectin soluble starch/gelatin blend films, and so on E was increased to its maximum by ~179.6% for soluble amylose starch/gelatin blends while it was increased to ~114.5% for amylopectin soluble starch/gelatin blends. On the other hand, WVP was significantly decreased to be 6.46 and 12.09 g·mm/m2·day·kPa for blends of amylose and amylopectin soluble?starches, respectively.展开更多
The blend films with gelatin and poly(vinyl alcohol) (PVA) were prepared by a solution casting method. The compatibility between gelatin and PVA in the blend films was investigated. The transmittance, Fourier-tran...The blend films with gelatin and poly(vinyl alcohol) (PVA) were prepared by a solution casting method. The compatibility between gelatin and PVA in the blend films was investigated. The transmittance, Fourier-transform infrared spectroscopy (FTIR), x-ray diffraction (XRD), thermogravimetry analysis (TG), and differential scanning calorimetry (DSC) were employed to characterize the resultant blend films. According to optic result, the opacity of the blend film at the ratio of 20/80 (w/w, Gel to PVA) was the lowest, indicating the best compatibility between Gel and PVA at the ratio. The results oflR, XRD, DSC, and TG revealed an intensive interaction and good compatibility between them in the blend film at the ratio. The mechanical properties and solubility showed that PVA content in the blend films obviously affected the elongation at break and solubility. The mechanical properties and water resistance of gelatin film may be improved by the introduetion of PVA.展开更多
In order to improve the mechanical and water swelling properties of the chitosan (CS) film, a series of transparent films were prepared by blending 2%(weight) chitosan acetic acid solution with 1.5%(weight) carboxymet...In order to improve the mechanical and water swelling properties of the chitosan (CS) film, a series of transparent films were prepared by blending 2%(weight) chitosan acetic acid solution with 1.5%(weight) carboxymethylated konjac glucomannan (CMKGM) aqueous solution according to predetermined ratio and drying at 30°C. The morphological structure, miscibility, thermal stability, mechanical properies, and swelling capacity of the blend films were studied by infrared (IR), X-ray diffraction (XRD), differential thermal analysis (DTA), scanning electron micrograph (SEM), and measurements of the mechanical properties and swelling properties. The results demonstrated that there was strong interaction and good miscibility between CS and CMKGM resulted from intermolecular hydrogen bonding and electrostatic force. The mechanical properties in dry state and wet state, thermostability, and water swelling properties of the blend films were obviously improved. The best values of the tensile strength in the dry and wet state achieved 89 MPa and 49 MPa, respectively, when the CMKGM content was 30%(weight). The CS/ CMKGM blend films provided promising biomedical applications.展开更多
Organic semiconducting/ferroelectric blend films attracted much attention due to their electrical bistability and rectification properties and thereof the potential in resistive memory devices. Blend films were usuall...Organic semiconducting/ferroelectric blend films attracted much attention due to their electrical bistability and rectification properties and thereof the potential in resistive memory devices. Blend films were usually deposited from solution, during which phase separation oc- curred, resulting in discrete semiconducting phase whose electrical property was modulated by surrounding ferroelectric phase. However, phase separation resulted in rough surface and thus large leakage current. To further improve electrical properties of such blend films, poly(methyl metacrylate) (PMMA) was introduced as additive into P3HT/P(VDF-TrFE) semiconducting/ferroelectric blend films in this work. It indicated that small amount of PMMA addition could effectively enhance the electrical stability to both large electrical stress and electrical fatigue and further improve retention performance. Overmuch PMMA addition tended to result in the loss of resistive switching property. A model on the configuration of three components was also put forward to well understand our experimental observations.展开更多
Thin films of incompatible polymer blends can form a variety of structures during preparation and subsequent annealing process. For the polymer blend system consisting of polystyrene and poly(styrene-co-p-bromo-styr...Thin films of incompatible polymer blends can form a variety of structures during preparation and subsequent annealing process. For the polymer blend system consisting of polystyrene and poly(styrene-co-p-bromo-styrene), i.e., PS/PBrxS, its compatibility could be adjusted by varying the degree of bromination and the molecular weight of both components comprised. In this paper, surface chemical compositions of the cast and the annealing films were investigated by X-ray photoelectron spectroscopy (XPS) and contact angle measurement; meanwhile, surface topographical changes are followed by atomic force microscopy (AFM). In addition, substantial attention was paid to the effect of annealing on the morphologic variations induced by phase separation and/or dewetting of the thin film. Moreover, the influences of the molecular weight, Mw, as well as the brominated degree, x%, on the sample surface are explored systematically, and the corresponding observations are explained in virtue of the Flory-Huggins theory, along with the dewetting of the polymer thin film.展开更多
The effects of blend composition and micro-phase structure on the mechanical behavior of A/B polymer blend film are studied by coupling the Monte Carlo(MC) simulation of morphology with the lattice spring model(LSM) o...The effects of blend composition and micro-phase structure on the mechanical behavior of A/B polymer blend film are studied by coupling the Monte Carlo(MC) simulation of morphology with the lattice spring model(LSM) of micro mechanics of materials.The MC method with bond length fluctuation and cavity diffusion algorithm on cubic lattice is adopted to simulate the micro-phase structure of A/B polymer blend.The information of morphology and structure is then inputted to the LSM composed of a three-dimensional network of springs to obtain the mechanical properties of polymer blend film.Simulated results show that the mechanical response is mainly affected by the density and the composition of polymer blend film through the morphology transition.When a force is applied on the outer boundary of polymer blend film,the vicinity of the inner cavities experiences higher stresses and strains responsible for the onset of crack propagation and the premature failure of the entire system.展开更多
Silver particulate thin films on softened polymer blends of Polystyrene (PS)/Poly(2-vinyl pyridine) (P2VP), PS/Poly(4-vinylpyridine) (P4VP), and Poly(vinylpyrollidone) (PVP)/P4VP at a rate of 0.4 nm/s held at a temper...Silver particulate thin films on softened polymer blends of Polystyrene (PS)/Poly(2-vinyl pyridine) (P2VP), PS/Poly(4-vinylpyridine) (P4VP), and Poly(vinylpyrollidone) (PVP)/P4VP at a rate of 0.4 nm/s held at a temperature of 457 K in vacuum of 8 × 10-6 Torr by evaporation are deposited. These silver films were characterized by their electrical behavior, optical properties and Scanning electron microscopy (SEM). Silver films deposited on softened PS, and PVP give rise to a very high room temperature resistance approaching that of the substrate resistance due to the formation of a highly agglomerated structure. On the other hand, silver films on softened P2VP and P4VP give rise to a room temperature resistance in the range of tens to a few hundred MΩ/ which is desirable for device applications. Silver films on the composites of PS/P2VP, PS/P4VP and PVP/P4VP show resistances at room temperature. The optical and plasmonic response of Ag nanoparticles onto thin layers of blends shows encapsulation of nanoparticles. The electrical properties and SEM of silver nanoparticles on the thin layers of polymer blends indicate the formation of much smaller, narrower dispersion and wide size distribution.展开更多
The blend film of silk fibroin (SF) and poly(ethylene glycol)400 (PEG400) with a blend ratio of 2/1 (wt/wt) wasprepared simply by dropping a little PEG400 into the SF solution and then casting the mixed aqueous soluti...The blend film of silk fibroin (SF) and poly(ethylene glycol)400 (PEG400) with a blend ratio of 2/1 (wt/wt) wasprepared simply by dropping a little PEG400 into the SF solution and then casting the mixed aqueous solution at 50℃. Theresulting film exhibited much better mechanical properties in the dry and wet state than SF itself, owing to theconformational change of SF in the blends from the random coil to the β-sheet structure and intermolecular hydrogen bondformation between SF and PEG400. Thermogravimetric analysis showed that the initial thermal decomposition temperatureof the blend film was 170℃, which was 80℃ lower than that of SF (250℃) and 20℃ higher than that of PEG400 (150℃),and indicated a Strong interaction between two components of the blend. No crystalline peaks were observed in the X-raydiffraction curve of the blend film. Cell culture test showed that SF/PEG400 was a suitable substrate for the growth of humanumbilical vein endothelial cells (HUVEC).展开更多
To improve the performance of polyurethane films,small amounts of cellulose nanofibrils(CNF)were physically blended with a waterborne polyurethane(WPU)emulsion,and then CNF/WPU composite films were prepared by cast-co...To improve the performance of polyurethane films,small amounts of cellulose nanofibrils(CNF)were physically blended with a waterborne polyurethane(WPU)emulsion,and then CNF/WPU composite films were prepared by cast-coating and drying.The particle size of the emulsions and the chemical structure,micromorphology,thermal stability,mechanical properties,and water resistance of the composite films were characterized using a Malvern laser particle size analyzer,Fourier transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM),thermogravimetric analysis(TGA),an electronic strength machine,water contact angle analysis(WCA),and water absorption tests,respectively.The results showed that at a low CNF content of 0.3 wt%,the particle size of the WPU emulsion and chemical structure of the film did not change significantly.In addition,the tensile strength of the composite film increased by up to 108%compared to the neat WPU film,and the thermal stability and water resistance were slightly improved.The addition of CNF greatly enhanced the tensile strength while maintaining the other original properties of the WPU film,which may greatly improve the service life and tear resistance of commercial coatings in the future.展开更多
Carboxymethyl starch with lower degree of substitution was, blended with acrylate copolymer for revealing the relation between mechanical properties and chemical structure of blending film. Effects of carboxymethy...Carboxymethyl starch with lower degree of substitution was, blended with acrylate copolymer for revealing the relation between mechanical properties and chemical structure of blending film. Effects of carboxymethylation of starch, acrylate constituent units of acrylate copolymers, and copolymer content of the film on the properties were investigated. The mechanical properties were evaluated in terms of tensile strength, breaking elongation, abrasion resistance, and flex-fatigue resistance. Film morphology was examined with X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscope (AFM). It was found that the properties depended on the degree of substitution of carboxymethyl starch, chemical structure of acrylate units, and content of acrylate copolymer. Phase-separation of the two ingredients occurred within film matrix and the separation was decreased after starch carboxymethylation. Breaking elongation and flex-fatigue resistance of the film reached maximmns when acrylate copolymer content was 50%. Excessively increasing the content of acrylate copolymer reduced the film properties.展开更多
In order to evaluate the cytocompatibility and biocompatibility of a new kind of chitosan blend film as a carrier of corneal endothelial cell, rabbit corneal endothelial cells cultured in vitro were breeded onto the f...In order to evaluate the cytocompatibility and biocompatibility of a new kind of chitosan blend film as a carrier of corneal endothelial cell, rabbit corneal endothelial cells cultured in vitro were breeded onto the film. After a cell monolayer formed, the scanning electron micrography was performed. After inplanted into anterior chamber, slit lamp observation, thickness metering, specular microscopy and HE staining were performed at random time after operation to evaluate the biocompatibility. Inflmmnation in anterior, thickness of cornea, cell density, hexagonality and cell size of the surgical cornea were taken as the indexes of biocompatibility. The cultured cells exhibited a confluent monolayer 10 days after incubation, which proved the satisfactory cytocompatibility of this film. Biocompatibility assay results suggested the implantation feasibility of the film as a carder of corneal endothelial cells.展开更多
The morphologies of triblock copolymer/homopolymer blend films, ABA/A and ABAIB, confined between two neutral hard walls were studied via Monte Carlo (MC) simulation on a simple .cubic lattice. The effects of φh (...The morphologies of triblock copolymer/homopolymer blend films, ABA/A and ABAIB, confined between two neutral hard walls were studied via Monte Carlo (MC) simulation on a simple .cubic lattice. The effects of φh (the volume fraction of homopolymer) and Md/Mb (the molecular weight of homopolymer in relation to that of the corresponding blocks in the copolymer) on the morphologies were investigated in detail.展开更多
Structure and properties of PU/PVC blended film are fnvestlgated in the work. The experimental results show that the PU/PVC blended film has a multiplex poroslty strueture, and their structure and properties vary with...Structure and properties of PU/PVC blended film are fnvestlgated in the work. The experimental results show that the PU/PVC blended film has a multiplex poroslty strueture, and their structure and properties vary with PVC content in the blended film. The correlation and regresslon between the properties and PVC content are listed in the paper.展开更多
文摘Polymer blends of cold water soluble starches (amylose or amylopectin soluble starch) with gelatin were prepared using solvent casting method. The solid state miscibility and polymer-polymer interactions between the constituent polymers were studied by fourier transforms infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorirmetry (DSC), light optical microscopy (OP) and scanning electron microscopy (SEM), whereas the thermal stability of the blends was studied by thermogravimetric analysis (TGA). Furthermore, tensile and water vapor barrier properties of the blends were assessed. The obtained results exhibited that gelatin was more miscible with amylose soluble starch than with amylopectin soluble starch. Moreover, enhancing mechanical and water barrier properties of amylose soluble starch/gelatin blends were more pronounced than those of amylopectin soluble starch/gelatin blends. Generally, tensile strength (TS) and Elongation percentage (E) of the blend films were found to be gradually increased with increasing the proportion of gelatin. Nevertheless, increasing starch proportion was in favor of decreasing water vapor permeability (WVP). At equal proportions of starch and gelatin (1:1), TS was raised up to 8.69 MPa for amylose soluble starch/gelatin blend films while it raised up to 4.96 MPa for amylopectin soluble starch/gelatin blend films, and so on E was increased to its maximum by ~179.6% for soluble amylose starch/gelatin blends while it was increased to ~114.5% for amylopectin soluble starch/gelatin blends. On the other hand, WVP was significantly decreased to be 6.46 and 12.09 g·mm/m2·day·kPa for blends of amylose and amylopectin soluble?starches, respectively.
基金Funded by the National Natural Science Foundation of China(Nos.21076199,51373158)
文摘The blend films with gelatin and poly(vinyl alcohol) (PVA) were prepared by a solution casting method. The compatibility between gelatin and PVA in the blend films was investigated. The transmittance, Fourier-transform infrared spectroscopy (FTIR), x-ray diffraction (XRD), thermogravimetry analysis (TG), and differential scanning calorimetry (DSC) were employed to characterize the resultant blend films. According to optic result, the opacity of the blend film at the ratio of 20/80 (w/w, Gel to PVA) was the lowest, indicating the best compatibility between Gel and PVA at the ratio. The results oflR, XRD, DSC, and TG revealed an intensive interaction and good compatibility between them in the blend film at the ratio. The mechanical properties and solubility showed that PVA content in the blend films obviously affected the elongation at break and solubility. The mechanical properties and water resistance of gelatin film may be improved by the introduetion of PVA.
基金Supported by the National Science Foundation of China( No.2 99770 14 )
文摘In order to improve the mechanical and water swelling properties of the chitosan (CS) film, a series of transparent films were prepared by blending 2%(weight) chitosan acetic acid solution with 1.5%(weight) carboxymethylated konjac glucomannan (CMKGM) aqueous solution according to predetermined ratio and drying at 30°C. The morphological structure, miscibility, thermal stability, mechanical properies, and swelling capacity of the blend films were studied by infrared (IR), X-ray diffraction (XRD), differential thermal analysis (DTA), scanning electron micrograph (SEM), and measurements of the mechanical properties and swelling properties. The results demonstrated that there was strong interaction and good miscibility between CS and CMKGM resulted from intermolecular hydrogen bonding and electrostatic force. The mechanical properties in dry state and wet state, thermostability, and water swelling properties of the blend films were obviously improved. The best values of the tensile strength in the dry and wet state achieved 89 MPa and 49 MPa, respectively, when the CMKGM content was 30%(weight). The CS/ CMKGM blend films provided promising biomedical applications.
基金This work was supported by the STCSM (No.13NMI400600) and the National Natural Science Foundation of China (No.U1430106).
文摘Organic semiconducting/ferroelectric blend films attracted much attention due to their electrical bistability and rectification properties and thereof the potential in resistive memory devices. Blend films were usually deposited from solution, during which phase separation oc- curred, resulting in discrete semiconducting phase whose electrical property was modulated by surrounding ferroelectric phase. However, phase separation resulted in rough surface and thus large leakage current. To further improve electrical properties of such blend films, poly(methyl metacrylate) (PMMA) was introduced as additive into P3HT/P(VDF-TrFE) semiconducting/ferroelectric blend films in this work. It indicated that small amount of PMMA addition could effectively enhance the electrical stability to both large electrical stress and electrical fatigue and further improve retention performance. Overmuch PMMA addition tended to result in the loss of resistive switching property. A model on the configuration of three components was also put forward to well understand our experimental observations.
文摘Thin films of incompatible polymer blends can form a variety of structures during preparation and subsequent annealing process. For the polymer blend system consisting of polystyrene and poly(styrene-co-p-bromo-styrene), i.e., PS/PBrxS, its compatibility could be adjusted by varying the degree of bromination and the molecular weight of both components comprised. In this paper, surface chemical compositions of the cast and the annealing films were investigated by X-ray photoelectron spectroscopy (XPS) and contact angle measurement; meanwhile, surface topographical changes are followed by atomic force microscopy (AFM). In addition, substantial attention was paid to the effect of annealing on the morphologic variations induced by phase separation and/or dewetting of the thin film. Moreover, the influences of the molecular weight, Mw, as well as the brominated degree, x%, on the sample surface are explored systematically, and the corresponding observations are explained in virtue of the Flory-Huggins theory, along with the dewetting of the polymer thin film.
基金Supported by the National Natural Science Foundation of China (20976044 20736002)
文摘The effects of blend composition and micro-phase structure on the mechanical behavior of A/B polymer blend film are studied by coupling the Monte Carlo(MC) simulation of morphology with the lattice spring model(LSM) of micro mechanics of materials.The MC method with bond length fluctuation and cavity diffusion algorithm on cubic lattice is adopted to simulate the micro-phase structure of A/B polymer blend.The information of morphology and structure is then inputted to the LSM composed of a three-dimensional network of springs to obtain the mechanical properties of polymer blend film.Simulated results show that the mechanical response is mainly affected by the density and the composition of polymer blend film through the morphology transition.When a force is applied on the outer boundary of polymer blend film,the vicinity of the inner cavities experiences higher stresses and strains responsible for the onset of crack propagation and the premature failure of the entire system.
文摘Silver particulate thin films on softened polymer blends of Polystyrene (PS)/Poly(2-vinyl pyridine) (P2VP), PS/Poly(4-vinylpyridine) (P4VP), and Poly(vinylpyrollidone) (PVP)/P4VP at a rate of 0.4 nm/s held at a temperature of 457 K in vacuum of 8 × 10-6 Torr by evaporation are deposited. These silver films were characterized by their electrical behavior, optical properties and Scanning electron microscopy (SEM). Silver films deposited on softened PS, and PVP give rise to a very high room temperature resistance approaching that of the substrate resistance due to the formation of a highly agglomerated structure. On the other hand, silver films on softened P2VP and P4VP give rise to a room temperature resistance in the range of tens to a few hundred MΩ/ which is desirable for device applications. Silver films on the composites of PS/P2VP, PS/P4VP and PVP/P4VP show resistances at room temperature. The optical and plasmonic response of Ag nanoparticles onto thin layers of blends shows encapsulation of nanoparticles. The electrical properties and SEM of silver nanoparticles on the thin layers of polymer blends indicate the formation of much smaller, narrower dispersion and wide size distribution.
基金This work was supported by the National Basic Science Research and Development Grants (973) of China (No. G1999064705).
文摘The blend film of silk fibroin (SF) and poly(ethylene glycol)400 (PEG400) with a blend ratio of 2/1 (wt/wt) wasprepared simply by dropping a little PEG400 into the SF solution and then casting the mixed aqueous solution at 50℃. Theresulting film exhibited much better mechanical properties in the dry and wet state than SF itself, owing to theconformational change of SF in the blends from the random coil to the β-sheet structure and intermolecular hydrogen bondformation between SF and PEG400. Thermogravimetric analysis showed that the initial thermal decomposition temperatureof the blend film was 170℃, which was 80℃ lower than that of SF (250℃) and 20℃ higher than that of PEG400 (150℃),and indicated a Strong interaction between two components of the blend. No crystalline peaks were observed in the X-raydiffraction curve of the blend film. Cell culture test showed that SF/PEG400 was a suitable substrate for the growth of humanumbilical vein endothelial cells (HUVEC).
文摘To improve the performance of polyurethane films,small amounts of cellulose nanofibrils(CNF)were physically blended with a waterborne polyurethane(WPU)emulsion,and then CNF/WPU composite films were prepared by cast-coating and drying.The particle size of the emulsions and the chemical structure,micromorphology,thermal stability,mechanical properties,and water resistance of the composite films were characterized using a Malvern laser particle size analyzer,Fourier transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM),thermogravimetric analysis(TGA),an electronic strength machine,water contact angle analysis(WCA),and water absorption tests,respectively.The results showed that at a low CNF content of 0.3 wt%,the particle size of the WPU emulsion and chemical structure of the film did not change significantly.In addition,the tensile strength of the composite film increased by up to 108%compared to the neat WPU film,and the thermal stability and water resistance were slightly improved.The addition of CNF greatly enhanced the tensile strength while maintaining the other original properties of the WPU film,which may greatly improve the service life and tear resistance of commercial coatings in the future.
基金the Open Project Program of Key Laboratory of Eco-Textiles,Ministry of Education,China(No.KLET0617)
文摘Carboxymethyl starch with lower degree of substitution was, blended with acrylate copolymer for revealing the relation between mechanical properties and chemical structure of blending film. Effects of carboxymethylation of starch, acrylate constituent units of acrylate copolymers, and copolymer content of the film on the properties were investigated. The mechanical properties were evaluated in terms of tensile strength, breaking elongation, abrasion resistance, and flex-fatigue resistance. Film morphology was examined with X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscope (AFM). It was found that the properties depended on the degree of substitution of carboxymethyl starch, chemical structure of acrylate units, and content of acrylate copolymer. Phase-separation of the two ingredients occurred within film matrix and the separation was decreased after starch carboxymethylation. Breaking elongation and flex-fatigue resistance of the film reached maximmns when acrylate copolymer content was 50%. Excessively increasing the content of acrylate copolymer reduced the film properties.
基金the High Technology Research and Development Program of China(2003AA625050)the National Natural Science Foundation of China(30070220)
文摘In order to evaluate the cytocompatibility and biocompatibility of a new kind of chitosan blend film as a carrier of corneal endothelial cell, rabbit corneal endothelial cells cultured in vitro were breeded onto the film. After a cell monolayer formed, the scanning electron micrography was performed. After inplanted into anterior chamber, slit lamp observation, thickness metering, specular microscopy and HE staining were performed at random time after operation to evaluate the biocompatibility. Inflmmnation in anterior, thickness of cornea, cell density, hexagonality and cell size of the surgical cornea were taken as the indexes of biocompatibility. The cultured cells exhibited a confluent monolayer 10 days after incubation, which proved the satisfactory cytocompatibility of this film. Biocompatibility assay results suggested the implantation feasibility of the film as a carder of corneal endothelial cells.
基金Acknowledgements This work is supported by the National Natural Science Foundation of China (Projects No. 20236010. 20476025, 20490200). E-Institute of Shanghai High Institution Grid (No.200303) and Shanghai Municipal Education Commission of China.
文摘The morphologies of triblock copolymer/homopolymer blend films, ABA/A and ABAIB, confined between two neutral hard walls were studied via Monte Carlo (MC) simulation on a simple .cubic lattice. The effects of φh (the volume fraction of homopolymer) and Md/Mb (the molecular weight of homopolymer in relation to that of the corresponding blocks in the copolymer) on the morphologies were investigated in detail.
文摘Structure and properties of PU/PVC blended film are fnvestlgated in the work. The experimental results show that the PU/PVC blended film has a multiplex poroslty strueture, and their structure and properties vary with PVC content in the blended film. The correlation and regresslon between the properties and PVC content are listed in the paper.