Probabilistic Lifetime Assessment of Marine Reinforced Concrete with Steel Corrosion and Cover Cracking

In order to study the durability behavior of marine reinforced concrete structure suffering from chloride attack, the structural service life is assumed to be divided into three critical stages, which can be characterized by steel corrosion and cover cracking. For each stage, a calculated model used to predict the lifetime is developed. Based on the definition of durability limit state, a probabilistic lifetime model and its time-dependent reliability analytical method are proposed considering the random natures of influencing factors. Then, the probabilistic lifetime prediction models are applied to a bridge pier located in the Hangzhou Bay with Monte Carlo simulation. It is found that the time to corrosion initiation to follows a lognormal distribution, while that the time from corrosion initiation to cover cracking t~ and the time for crack to develop from hairline crack to a limit crack width t2 can be described by Weibull distributions. With the permitted failure probability of 5.0%, it is also observed that the structural durability lifetime mainly depends on the durability life to and that the percentage of participation of the life to to the total service life grows from 61.5% to 83.6% when the cover thickness increases from 40 mm to 80 mm. Therefore, for any part of the marine RC bridge, the lifetime predictions and maintenance efforts should also be directed toward controlling the stage of corrosion initiation induced by chloride ion.

Influence of steel corrosion to flexural behavior of coral aggregate concrete beam

To study the flexural behavior and calculation model,8 coral aggregate concrete(CAC)beams with different types of steel were designed.The flexural behavior of CAC beam was tested.The failure mode,bearing capacity,the maximum crack width(ws)and average crack spacing(lm)were studied.A calculation model for the bearing capacity of CAC beam was proposed.The results indicated that with the steel strength increased,the cracking moment(Mcr)and ultimate moment(Mu)of CAC beam increased,and the development of the ws gradually slowed,which effectively inhibited the formation of cracks and improved the flexural behavior of CAC beam.For CAC structures in the ocean engineering,it is recommended to use organic new coated steel to extend its effective service life.In addition,considering the influence of steel corrosion,a calculation model for the Mcr,Mu,lm and ws of CAC beam was established.

Effectiveness of inhibitors in increasing chloride threshold value for steel corrosion

This investigation was aimed at evaluating the effectiveness of corrosion inhibitors in increasing the chloride threshold value for steel corrosion. Three types of corrosion inhibitors, calcium nitrite （Ca（NO2）2）, zinc oxide （ZnO）, and N,N＇-dimethylaminoethanol （DMEA）, which respectively represented the anodic inhibitor, cathodic inhibitor, and mixed inhibitor, were chosen. The experiment was carried out in a saturated calcium hydroxide （Ca（OH）2） solution to simulate the electrolytic environment of concrete. The inhibitors were initially mixed at different levels, and then chloride ions were gradually added into the solution in several steps. The open-circuit potential （Ecorr） and corrosion current density （lcorr） determined by electrochemical impedance spectra （EIS） were used to identify the initiation of active corrosion, thereby determining the chloride threshold value. It was found that although all the inhibitors were effective in decreasing the corrosion rate of steel reinforcement, they had a marginal effect on increasing the chloride threshold value.

Parametric study of thermo-hydro-mechanical response of claystone with consideration of steel corrosion

In this paper,the thermo-hydro-mechanical(THM)response of claystone is studied via a series of parametric studies,considering the evolution of mechanical properties and deformation behavior of corroded steel.The numerical simulations are performed by using a coupled THM finite element code and two different constitutive models:a visco-elastoplastic model for geological formation and a von Mises type model for steel liner.The mechanical properties and deformation behavior of corroded steel are described in a conceptual model.Finally,a disposal tunnel supported by a steel liner is studied and a series of parametric studies is defined to demonstrate the corrosion effects of steel liner on the THM response of the claystone.The comparison of different numerical calculations exhibits that the volumetric expansion related to corrosion products has an important impact on the stress and displacement fields in the claystone surrounding the disposal tunnel.However,the evolutions of temperature and liquid pressure in the claystone are essentially controlled by its THM properties and independent of the steel corrosion.

Synergic Mechanism of an Organic Corrosion Inhibitor for Preventing Carbon Steel Corrosion in Chloride Solution

The inhibition effect of dimethylethanolamine（DMEA） and its composite with carboxylic acid was studied with the electrochemical tests. The experimental results indicate that DMEA is not a good inhibitor but the composite of DMEA with caprylic acid exhibits excellent inhibiting efficiency. The synergic mechanism of the organic corrosion inhibitors（OCIs） was studied with quantum chemical calculations. It is found that the DMEA forms a quaternary ammonium salt with the proton in carboxylic acid, and a cyclic complex formed between the salt and Fe may be responsible for the enhancement of inhibiting efficiency. The possible hydrogen bond formed between DMEA and carboxylic acid is not enough for the inhibiting effect. This work is helpful to proposing theoretical interpretation as well as developing a functional organic inhibitor to improve the durability of reinforced concrete contaminated with chloride.

Corrosion Test of the Steel Plate in a WJ-8 Fastener for High Speed Rail

It was found that the steel plate in the composite plate in the WJ-8 fastener used in high speed rail is rusty. The objective of this study is to test the zinc coating of the steel plate. A literature review was conducted to identify the zinc coating techniques, and the companies that can provide different coating service was identified. A salt fog chamber was built that was in compliance with the ANSI B117 code, and the steel plates that were coated by the identified companies were tested using the salt fog chamber. The results indicated that the coating technique that had the best performance in preventing corrosion was the Greenkote plates with passivation. The galvanized option had the roughest coating layer, and it was the most reactive in the salt water solution. This makes it non-ideal for the dynamic rail environment because the increased friction of the plate could damage the supports, especially during extreme temperatures that would cause the rail to expand or contract. Greenkote with Phosphate and ArmorGalv also provided increased corrosion prevention with a smooth, strong finish, but it had more rust on the surface area than the Greenkote with ELU passivation. The ArmorGalv sample had more rust on the surface area than the Greenkote samples. This may not be a weakness in the ArmorGalv process;rather, it likely was the result of this particular sample not having the added protection of a colored coating.

Experimental Study on Corrosion of Stainless Steel in Low Temperature Multi effect Seawater Desalination

Starting from the corrosion mechanism,this paper analyzes the characteristics of various types of stainless steel and selects the best performance composite plate composite plate stainless steel.Analyze and select the most suitable corrosion detection method based on specific practical multi working conditions,discuss the interference factors that affect metal corrosion during experimental simulation,and the advantages of newly developed sheet metal.The new development of composite board panels,with the substrate and composite materials applying their respective capabilities for MED,will bring breakthrough progress to the scientific research and engineering applica-tion of composite boards.

Electrochemical impedance spectroscopy study on the corrosion of the weld zone of 3Cr steel welded joints in CO_2 environments

The welded joints of 3Cr pipeline steel were fabricated with commercial welding wire using the gas tungsten arc welding （GTAW） technique. Potentiodynamic polarization curves, linear polarization resistance （LPR）, electrochemical impedance spectroscopy （EIS）, scan- ning electron microscopy （SEM）, and energy-dispersive spectrometry （EDS） were used to investigate the corrosion resistance and the growth of a corrosion film on the weld zone （WZ）. The changes in electrochemical characteristics of the film were obtained through fitting of the EIS data. The results showed that the average corrosion rate of the WZ in CO2 environments first increased, then fluctuated, and finally de- creased gradually. The formation of the film on the WZ was divided into three stages： dynamic adsorption, incomplete-coverage layer forma- tion, and integral layer formation.

Influence of mill scale and rust layer on the corrosion resistance of low-alloy steel in simulated concrete pore solution

Electrochemical impedance spectroscopy, cyclic potentiodynamic polarization measurements, and scanning electron microscopy in conjunction with energy-dispersive X-ray spectroscopy were used to investigate the influence of mill scale and rust layer on the passivation capability and chloride-induced corrosion behaviors of conventional low-carbon（LC） steel and low-alloy（LA） steel in simulated concrete pore solution. The results show that mill scale exerts different influences on the corrosion resistance of both steels at various electrochemical stages. We propose that the high long-term corrosion resistance of LA steel is mainly achieved through the synergistic effect of a gradually formed compact, adherent and well-distributed Cr-enriched inner rust layer and the physical barrier protection effect of mill scale.

Combined electronic/atomic level computational, surface(SEM/EDS),chemical and electrochemical studies of the mild steel surface by quinoxalines derivatives anti-corrosion properties in 1 mol·L^(-1) HCl solution

This work is devoted to the study of the inhibition of corrosion of mild steel(MS)in molar hydrochloric acid(1 mol·L-1 HCl)by two named quinoxaline derivatives namely,2-(2,4-dichlorophenyl)-1,4-dihydroquinoxaline(HQ)and 2-(2,4-dichlorophenyl)-6-methyl-1,4-dihydroquinoxaline(CQ).The inhibitory efficacy of HQ and CQ compounds is first evaluated using the gravimetric method and using electrochemical techniques(stationary and transient techniques).The results showed that our compounds are efficient corrosion inhibitors and the inhibition rates(ηEIS%)reached up to 91%and 94.2%at 10-3 mol·L-1 for HQ and CQ,respectively.The mentioned molecules are classified as mixed-type inhibitors.The adsorption of these inhibitors on the surface of steel in hydrochloric HCl 1 mol·L-1 medium obeys the Langmuir adsorption isotherm.The results of the scanning electron microscope(SEM)showed the formation of a protective film on the surface of the steel in the presence of the inhibitors studied.Elementary analysis is obtained by energy dispersive X-ray spectroscopy(EDS).The inhibition property was further elucidated by theoretical approaches such as:Density Functional Theory(DFT),quantum chemical descriptors(QCD),local reactive indices,solvent effect,theoretical complexation,Molecular Dynamic(MD)simulation,effect of temperature on adsorption energy(Eads),Radial Distribution Function(RDF),and Mean Square Displacement(MSD).The results of these approaches support the experimental results.

Corrosion behavior and characteristics of the product film of API X100 steel in acidic simulated soil solution

The short-term corrosion behavior of API X100 steel in an acidic simulated soil was investigated by electrochemical measurements and soaking experiments,followed by corrosion morphology observations and X-ray photoelectron spectroscopy analyses.The results show that X100 steel exhibits an obvious pitting susceptibility in an acidic soil environment.Pits nucleate after approximately 10 h of immersion.Along with the nucleation and growth of the pits,the charge-transfer resistance and open-circuit potential first increase sharply,then decrease slowly,and eventually reach a steady state.The maxima of the charge-transfer resistance and open-circuit potential are attained at approximately 10 h.The evolution of the electrochemical process is confirmed by the analysis of the product film.The product film exhibits a porous and loose structure and could not protect the substrate well.The product film is primarily composed of ferrous carbonate and ferrous hydroxide（Fe（OH）2）.The concentration of Fe（OH）2 in the product film increases from the inside to the outside layer.

Relationship between the specific surface area of rust and the electrochemical behavior of rusted steel in a wet–dry acid corrosion environment

The relationship between the specific surface area（SSA） of rust and the electrochemical behavior of rusted steel under wet-dry acid corrosion conditions was investigated. The results showed that the corrosion current density first increased and then decreased with increasing SSA of the rust during the corrosion process. The structure of the rust changed from single-layer to double-layer, and the γ-FeOOH content decreased in the inner layer of the rust with increasing corrosion time; by contrast, the γ-FeOOH content in the outer layer was constant. When the SSA of the rust was lower than the critical SSA corresponding to the relative humidity during the drying period, condensed water in the micropores of the rust could evaporate, which prompted the diffusion of O_2 into the rust and the following formation process of γ-FeOOH, leading to an increase of corrosion current density with increasing corrosion time. However, when the SSA of the rust reached or exceeded the critical SSA, condensate water in the micro-pores of the inner layer of the rust could not evaporate which inhibited the diffusion of O_2 and decreased the γ-FeOOH content in the inner rust, leading to a decrease of corrosion current density with increasing corrosion time.

Influence of steel corrosion on axial and eccentric compression behavior of coral aggregate concrete column

To study the behavior of coral aggregate concrete(CAC)column under axial and eccentric compression,the compression behavior of CAC column with different types of steel and initial eccentricity(ei)were tested,and the deformation behavior and ultimate bearing capacity(Nu)were studied.The results showed that as the ei increases,the Nu of CAC column decreases nonlinearly.Besides,the steel corrosion in CAC column is severe,which reduces the steel section and steel strength,and decreases the Nu of CAC column.The durability of CAC structures can be improved by using new organic coated steel.Considering the influence of steel corrosion and interfacial bond deterioration,the calculation models of Nu under axial and eccentric compression were presented.

Benevolent behavior of Kleinia grandiflora leaf extract as a green corrosion inhibitor for mild steel in sulfuric acid solution

The ethanolic extract of Kleinia grandiflora leaves was characterized and tested for its potential anticorrosion properties on mild steel in 1 M H2SO4 medium using mass-loss analysis, potentiodynamic polarization measurements, electrochemical impedance spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, UV–visible spectroscopy, and X-ray diffraction analysis. The effect of temperature on the corrosion behavior of mild steel was studied in the range of 308 to 328 K. The inhibition efficiency was observed to increase with increasing concentration of the extract. Polarization curves revealed that the Kleinia grandiflora leaf extract is a mixed inhibitor. Impedance diagrams revealed that an increase of Kleinia grandiflora leaf extract concentration increased the charge transfer resistance and decreased the double-layer capacitance. The adsorption process obeys Langmuir＇s model, with a standard free energy of adsorption（ΔGads） of-18.62 k J/mol. The obtained results indicate that the Kleinia grandiflora leaf extract can serve as an effective inhibitor for the corrosion of mild steel in a sulfuric acid medium.

Corrosion Behavior of Ultra-high Strength Steel 300M in Different Simulated Marine Environments

Corrosion behavior of 300M in neutralcorrosion environments containing Na Clsimulated by totalimmersion（TI）,salt spraying（SS）and periodic immersion（PI）,was investigated by surface analysis techniques,corrosion weight-loss method,and electrochemicalmeasurements.In totalimmersion environment,rust on the steelconsisted of a porous outer rust layer with main constituent of γ-Fe OOH,and an inner rust layer of dense Fe_3O_4 film with network broad cracks.In salt spraying environment,outer rust with main composition of γ-Fe OOH/α-Fe OOH/Fe_3O_4 was compact,and inner rust showed dense Fe_3O_4 film.Rust formed by periodic immersion exhibited a compact outer rust layer with constituent of α-Fe OOH/γ-Fe OOH/Fe_3O_4 and an inner rust layer with composition of α-Fe OOH/α-Fe_2O_3;inner rust showed a ultra-dense film adherent to the steel.The corrosion rate showed a rule of vss（salt spraying）〉vti（totalimmersion）〉〉vpi（periodic immersion）in 0-240 h,and vss≈vti？vpiin 240-720 h.The rust formed by periodic immersion was dense and compact,with stable electrochemicalproperties,and had excellent protection on the steel.Humidity and oxygen concentration in allthe environments played major roles in rust formation.

Effects of chloride ion concentration and pH values on the corrosion behavio of Cr12Ni3Co12Mo4W ultra-high-strength martensitic stainless steel

The effects of Cl ion concentration and pH values on the corrosion behavior of Cr12Ni3Co12Mo4W ultra-high-strength martensitic stainless steel（UHSMSS） were investigated by a series of electrochemical tests combined with observations by stereology microscopy and scanning electron microscopy. A critical Cl- ion concentration was found to exist（approximately 0.1wt%）, above which pitting occurred. The pitting potential decreased with increasing Cl- ion concentration. A UHSMSS specimen tempered at 600°C exhibited a better pitting corrosion resistance than the one tempered at 400°C. The corrosion current density and passive current density of the UHSMSS tempered at 600°C decreased with increasing pH values of the corrosion solution. The pits developed a shallower dish geometry with increasing polarization potential. A lacy cover on the pits of the UHSMSS tempered at 400°C accelerated pitting, whereas corrosion products deposited in the pits of the UHSMSS tempered at 600°C hindered pitting.

Inhibitive effect of Xylopia ferruginea extract on the corrosion of mild steel in 1M HCl medium

The alkaloid content of the leaves and stem bark of Xylopia ferruginea plant was isolated and tested for its anticorrosion potential on mild steel corrosion in a hydrochloric acid medium by using electrochemical impedance spectroscopy,potentiodynamic polarization measurement,scanning electron microscopy（SEM）,and Fourier transform infra red（FTIR） analysis.The experimental results reveal the effective anticorrosion potential of the plant extract.The mixed mode of action exhibited by the plant extract is evidenced from the polarization study.SEM images proof the formation of a protective layer over the mild steel surface,and this is supported by the FTIR study.The possible mode of the corrosion inhibition mechanism has also been discussed.

Environmental boundary and formation mechanism of different types of H2S corrosion products on pipeline steel

To establish an adequate thermodynamic model for the mechanism of formation of hydrogen sulfide (H2S) corrosion products, theoretical and experimental studies were combined in this work. The corrosion products of API X60 pipeline steel formed under different H2S corrosion conditions were analyzed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction. A thermodynamic model was developed to clarify the environmental boundaries for the formation and transformation of different products. Presumably, a dividing line with a negative slope existed between mackinawite and pyrrhotite. Using experimental data presented in this study combined with previously published results, we validated the model to predict the formation of mackinawite and pyrrhotite on the basis of the laws of thermodynamics. The established relationship is expected to support the investigation of the H2S corrosion mechanism in the oil and gas industry. © 2017, University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg.

Influence of Mineral Admixtures on Corrosion of Steel Rebar in Concrete

The effects of several mineral admixtures such as silica fume,granulated ground blast furnace slag and fly ash at different replacement ratio instead of Portland cement on the corrosion of steel reinforced concrete were investigated.By measuring the rebar anode polarization curve,permeability of concrete,mass loss of steel rebar and the amount of chloride ions and hydroxide in mortar,the corrosion resistance of steel embedded in fresh mortar incorporated of salt and different mineral admixtures were evaluated respectively.The results show that most mineral admixture can not improve corrosion resistance of concrete at early ages.However,in the long term the addition of mineral admixtures can decrease obviously the permeability of concrete and free chloride content in the pore solution of concrete as well as effectively improve the protection ability of passive film of steel rebar.

Corrosion behavior of low alloy steels in a wet–dry acid humid environment

The corrosion behavior of corrosion resistant steel（CRS） in a simulated wet–dry acid humid environment was investigated and compared with carbon steel（CS） using corrosion loss, polarization curves, X-ray diffraction（XRD）, scanning electron microscopy（SEM）, electron probe micro-analysis（EPMA）, N2 adsorption, and X-ray photoelectron spectroscopy（XPS）. The results show that the corrosion kinetics of both steels were closely related to the composition and compactness of the rust, and the electrochemical properties of rusted steel. Small amounts of Cu, Cr, and Ni in CRS increased the amount of amorphous phases and decreased the content of γ-Fe OOH in the rust, resulting in higher compactness and electrochemical stability of the CRS rust. The elements Cu, Cr, and Ni were uniformly distributed in the CRS rust and formed CuFeO2, Cu2O, CrOOH, NiFe2O4, and Ni2O3, which enhanced the corrosion resistance of CRS in the wet–dry acid humid environment.