Three-dimensional strata movement around coal face of steeply dipping seam group

Steeply dipping seam group, which has complex occurrence conditions, belongs to the steeply dipping seam. The research on the strata movement around the coal face not only improves safe production technology in practice, but also develops the mining theory. By using physical simulation experiments, numerical simulation and site test, the deformation, failure and movement of surrounding rock in Iongwall working face were analyzed. According to the analysis, characteristics of the seam group were formed which is different from the single seam. Asymmetry mechanics, sequential changes and imbalance of strata movement along the tendency working face were summarized. Furthermore the features of upper and lower seams were different. The mining of the lower seam induced more complex strata movement along the strike. Multi-section mining disturbed surrounding rocks in larger areas than the single section mining did, which had an impact on and dynamic loading function to the support when mining the lower seam, and produced a great influence on the stability of support-rock system.

Monitoring strata behavior due to multi-slicing top coal caving longwall mining in steeply dipping extra thick coal seam

For studying the strata behavior due to multi-slicing top coal caving longwall mining along-the-strike direction in steeply dipping extra thick coal seams,the shield support pressures of the upper and lower slices of panel 37220 in Dongxia Coal Mine were monitored using the KJ513 dynamic monitoring system.The set up rooms adopted the "horizontal line-arc segment-inclined line" form and used different types of shield supports.The results show that the strata pressure of upper slice panel 37220-1 changed slightly along the strike direction,while along the dip direction it exhibited strong to weak pressure from bottom to top.The first weighting interval of lower slice panel 37220-2 was about 60.8 m,and the average periodic weighting interval were about 22.6 m.The strata behavior of panel 37220-2 exhibited a spatiotemporal characteristic in that periodic weighting occurred first in the middle-upper part,followed by the middle and upper parts,arc segment,and finally the lower part.During the periodic weighting,the weighting interval and intensity also exhibited strong space characteristics.The average dynamic load coefficient was 1.48 and the maximum lateral load of the side shield was 20-25 MPa.

Breaking and mining-induced stress evolution of overlying strata in the working face of a steeply dipping coal seam

The breaking features and stress distribution of overlying strata in a steeply dipping coal seam(SDCS)differ significantly from those in a near-horizontal one.In this study,the laws governing the evolution of vertical stress release and shear stress concentration in the overlying strata of coal seams with different dip angles are derived via numerical simulation,rock mechanics tests,acoustic emissions,and field measurements.Thus,the stress-driven dynamic evolution of the overlying strata structure,in which a shear stress arch forms,is determined.Upon breaking the lower pari of the overlying strata,the shear stress transfers rapidly to the upper part of the working face.The damaged zone of the overlying strata migrates upward along the dip direction of the working face.The gangue in the lower part of the working face is compacted,leading to an increase in vertical stress.As the dip angle of the coal seam increases,the overlying strata fail suddenly under the action of shear stresses.Finally,the behavioral response of the overlying strata driven by shear stresses in the longwall working face of an SDCS is identified and analyzed in detail.The present research findings reveal the laws governing the behavior of mine pressure in the working face of an SDCS,which in turn can be used to establish the respective on-site guidance.