Design,test,and verification of in-situ condition preserved coring and analysis system in lunar-based simulation environment

The lunar surface and its deep layers contain abundant resources and valuable information resources,the exploration and exploitation of which are important for the sustainable development of the human economy and society.Technological exploration and research in the field of deep space science,especially lunar-based exploration,is a scientific strategy that has been pursued in China and worldwide.Drilling and sampling are key to accurate exploration of the desirable characteristics of deep lunar resources.In this study,an in-situ condition preserved coring(ICP-Coring)and analysis system,which can be used to test drilling tools and develop effective sampling strategies,was designed.The key features of the system include:(1)capability to replicate the extreme temperature fluctuations of the lunar environment(-185 to 200℃)with intelligent temperature control;(2)ability to maintain a vacuum environment at a scale of 10^(-3) Pa,both under unloaded conditions within Ф580 mm×1000 mm test chamber,and under loaded conditions using Ф400 mm×800 mm lunar rock simulant;(3)application of axial pressures up to 4 MPa and confining pressures up to 3.5 MPa;(4)sample rotation at any angle with a maximum sampling length of 800 mm;and(5)multiple modes of rotary-percussive drilling,controlled by penetration speed and weight on bit(WOB).Experimental studies on the drilling characteristics in the lunar rock simulant-loaded state under different drill bit-percussive-vacuum environment configurations were conducted.The results show that the outgassing rate of the lunar soil simulant is greater than that of the lunar rock simulant and that a low-temperature environment contributes to a reduced vacuum of the lunar-based simulated environment.The rotary-percussive drilling method effectively shortens the sampling time.With increasing sampling depth,the temperature rise of the drilling tools tends to rapidly increase,followed by slow growth or steady fluctuations.The temperature rise energy accumulation of the drill bits under vacuum is more significant than that under atmospheric pressure,approximately 1.47 times higher.The real-time monitored drilling pressure,penetration speed and rotary torque during drilling serve as parameters for discriminating the drilling status.The results of this research can provide a scientific basis for returning samples from lunar rock in extreme lunar-based environments.

System design and validation of Queqiao-2 lunar relay communication satellite

In order to provide relay communication supports for future Chinese lunar exploration program,Queqiao-2 relay communication satellite was developed.Queqiao-2 can perform scientific observations with three kinds of scientific instruments on board.The system design of Queqiao-2,including mission orbit and transfer orbit design,configuration and layout design,housekeeping and information flow design,power supply and distribution design,GNC and propulsion system design,communication links design,etc.,was accomplished through comprehensive tradeoff and evaluation on technical maturity,availability,schedule,cost,and so on.With a view to reducing development risk,both the platform and relay communication payloads were developed based on significant heritage from previous Queqiao relay satellite and other relevant spacecraft.Queqiao-2 features flexible system architecture to support multiple frequencies,modulations,data rates and software reconfigurations to meet new user requirements.Subsequent to a successful launch on March 20,2024,by means of 5 orbit maneuvers,Queqiao-2 was inserted into a highly elliptical frozen mission orbit around the moon with a 24h period on schedule.Following on-orbit tests and calibrations,Queqiao-2 has possessed the capacity to provide reliable relay communication services to multiple lunar exploration missions,as well as the capacity to perform scientific observations.Under the support of Queqiao-2,Chang′e-6 achieved its ambitious mission goal to collect and return samples from the moon′s mysterious far side.In the meanwhile,Queqiao-2 has also paved the way for the following Chinese lunar exploration missions including Chang′e-7 and Chang′e-8.The design life time of Queqiao-2 is more than 8 years.Benefit from flexibility and extensibility of relay communication system design,it is convenient to provide relay communication services for future lunar exploration missions of both China and other countries.In addition,innovative scientific observations would be performed during the period that no relay communication task is arranged.The system design of Queqiao-2 reflects the development philosophy of technical innovations and inheritance integration.Based on highly flexible and extensible system architecture,multiple and concurrent relay communication mission requirements can be met.It can provide strong supports for future lunar exploration missions.Successful launching,orbit entering and on-orbit tests of Queqiao-2 verified the correct design principle and versatility.By means of Queqiao-2,more innovative scientific outcomes are anticipated and lunar exploration activities can be facilitated.

Design and Implementation of Library Seating Management System

The library seating management system is an important part of the library’s modern services. The system is based on the Spring and Spring Boot framework, and the system realizes a series of functions such as real-time query, reservation, and cancellation of seat resources, providing users with great convenience. With a simple operation, users can know the availability of seats in the library in real time and reserve them according to their needs. At the same time, the system also provides rich management functions, enabling administrators to easily configure and manage seat resources. The addition, deletion, modification and review of users, the generation of seats, the viewing of user usage records, and the addition or deletion of points for users’ usage can also be carried out. This not only improves the management efficiency, but also provides more scientific and accurate data support for the management of the library. The system not only optimizes the user experience, but also promotes the scientific management and efficient utilization of library resources, and provides strong support for the modern services of the library.

Design and Research of an Intelligent Learning System for University Physics

In order to break through the limitations of traditional teaching,realize the integration of online and offline teaching,and optimize the intelligent learning experience of university physics,this paper proposes the design of an intelligent learning system for university physics based on cloud computing platforms,and applies this system to teaching environment of university physics.It successfully integrates emerging technologies such as cloud computing,machine learning,and situational awareness,integrates learning context awareness,intelligent recording and broadcasting,resource sharing,learning performance prediction,and content planning and recommendation,and comprehensively improves the quality of university physics teaching.It can optimize the teaching process and deepen intelligent teaching reform,aiming at providing references for the teaching practice of university physics.

Teaching Reform and Practice of Embedded System Design Based on Outcome-Based Education

Embedded system design is the core course of the telecommunication major in engineering universities,which combines software and hardware through embedded development boards.Aiming at the problems existing in traditional teaching,this paper proposes curriculum teaching reform based on the outcome-based education(OBE)concept,including determining course objectives,reforming teaching modes and methods,and improving the curriculum assessment and evaluation system.After two semesters of practice,this method not only enhances students’learning initiative but also improves teaching quality.

Exploration of Energy-Saving Technologies in Building Electrical System Design

Green energy conservation is the mainstream trend in the current development of the construction industry.The application of energy-saving technology in building electrical system design can effectively reduce energy consumption,avoid unnecessary energy consumption,and truly achieve energy conservation and environmental protection.Based on this,the article elaborates on the principles of energy-saving design in building electrical systems,and actively explores the application of energy-saving technologies from different perspectives such as optimizing power supply and distribution system design,adopting high-efficiency energy-saving lighting equipment,applying renewable energy,promoting smart home technology,and improving the efficiency of building electrical equipment.

Design and analysis of a high loss density motor cooling system with water cold plates

Aiming at reducing the difficulty of cooling the interior of high-density motors,this study proposed the placement of a water cold plate cooling structure between the axial laminations of the motor stator.The effect of the cooling water flow,thickness of the plate,and motor loss density on the cooling effect of the water cold plate were studied.To compare the cooling performance of water cold plate and outer spiral water jacket cooling structures,a high-speed permanent magnet motor with a high loss density was used to establish two motor models with the two cooling structures.Consequently,the cooling effects of the two models were analyzed using the finite element method under the same loss density,coolant flow,and main dimensions.The results were as follows.(1)The maximum and average temperatures of the water cold plate structure were reduced by 25.5%and 30.5%,respectively,compared to that of the outer spiral water jacket motor;(2)Compared with the outer spiral water jacket structure,the water cold plate structure can reduce the overall mass and volume of the motor.Considering a 100 kW high-speed permanent magnet motor as an example,a water cold plate cooling system was designed,and the temperature distribution is analyzed,with the result indicating that the cooling structure satisfied the cooling requirements of the high loss density motor.

Applying UML and Machine Learning to Enhance System Analysis and Design

System analysis and design (SAD) is a crucial process in the development of software systems. The impact of modeling techniques and software engineering practices on SAD has been the focus of research for many years. Two such techniques that have had a significant impact on SAD are Unified Modeling Language (UML) and machine learning. UML has been used to model the structure and behavior of software systems, while machine learning has been used to automatically learn patterns in data and make predictions. The purpose of this paper is to review the literature on the impact of UML and machine learning on SAD. We summarize the findings from several studies and highlight the key insights related to the benefits and limitations of these techniques for SAD. Our review shows that both UML and machine learning have had a positive impact on SAD, with UML improving communication and documentation, and machine learning improving the accuracy of predictions. However, there are also challenges associated with their use, such as the need for expertise and the difficulty of interpreting machine learning models. Our findings suggest that a combination of UML and machine learning can enhance SAD by leveraging the strengths of each technique.

满足DNV船级符号Clean(Design)要求的轮机设备订货及系统设计

为有效避免在船舶产品设计过程中出现疏漏,研究挪威船级社船级符号Clean(Design)对轮机设备订货、系统设计和舱柜布置的最新要求,并对各设备和系统的特殊要求及设计原则进行梳理和归纳。用于处理污染物的设备主要包括油水分离器、污水处理装置和焚烧炉,涉及的船舶系统主要包括舱底水系统、生活污水处理系统、泡沫灭火系统和艉管滑油系统等。该研究可供满足该规范要求的环保型船舶产品的设计参考。

基于Ant Design Pro的物流系统前端开发与用户体验优化研究

本文探讨了Ant Design Pro在物流系统开发中的应用,特别是其对用户体验和数据可视化的影响。通过采用案例研究方法,分析Ant Design Pro在构建企业级物流系统中的应用。研究发现,Ant Design Pro的一致性设计和丰富的组件库显著提升了开发效率和用户交互体验。此外,其数据可视化组件有效支持了复杂物流数据的呈现和分析。然而,其在性能优化和定制化需求方面面临着挑战。最终,本文提出了一系列基于Ant Design Pro的物流系统开发最佳实践,并对其潜在的改进方向进行了讨论。研究结果为物流行业的信息系统开发提供了实用的指导,并为Ant Design Pro社区贡献了宝贵的实践经验。

Design and Analysis of the Gemini Chain System in Dual Clutch Transmission of Automobile

Chain drive system is widely used in the conditions of high-speed, overload, variable speed and load, Many studies are focused on the meshing theory and wear characteristics of chain drive system, but system design, analysis, and noise characteristics of the chain drive system are weak. System design and noise characteristic are studied for a new type Gemini chain of dual-clutch automatic transmission. Based on the meshing theory of silent chain, the design parameters of the Gemini chain system are calculated and the mathematical models and dynamic analysis models of the Gemini chain system are established. Dynamic characteristics of the Gemini chain system is simulated and the contact force of plate and pin, plate and sprockets, the chain tension forces, the transmission error and the stress of plates and pins are analyzed. According to the simulation results of the Gemini chain system, the noise experiment about system is carried out. The noise values are tested at different speed and load and spectral characteristics are analyzed. The results of simulation and experimental show that the contact forces of plate and pin, plate and sprockets are smaller than the allowable stress values, the chain tension force is less than ultimate tension and transmission error is limited in 1.2%. The noise values can meet the requirements of industrial design, and it is proved that the design and analysis method of the Gemini chain system is scientific and feasible. The design and test system is built from analysis to test of Gemini chain system. This research presented will provide a corresponding theoretical guidance for the design and dynamic characteristics and noise characteristics of chain drive system.

Motion/Posture Modeling and Simulation Verification of Physically Handicapped in Manufacturing System Design

Non-obstacle design is critical to tailor physically handicapped workers in manufacturing system. Simultaneous consideration of variability in physically disabled users, machines and environment of the manufacturing system is extremely complex and generally requires modeling of physically handicapped interaction with the system. Most current modeling either concentrates on the task results or functional disability. The integration of physical constraints with task constraints is far more complex because of functional disability and its extended influence on adjacent body parts. A framework is proposed to integrate the two constraints and thus model the specific behavior of the physical handicapped in virtual environment generated by product specifications. Within the framework a simplified model of physical disabled body is constructed, and body motion is generated based on 3 levels of constraints（effecter constraints, kinematics constraints and physical constraints）. The kinematics and dynamic calculations are made and optimized based on the weighting manipulated by the kinematics constraints and dynamic constraints. With object transferring task as example, the model is validated in Jack 6.0. Modelled task motion elements except for squatting and overreaching well matched with captured motion elements. The proposed modeling method can model the complex behavior of the physically handicapped by integrating both task and physical disability constraints.

Design and Implementation of Stud-farm Daily Management System Based on C/S Structure

In order to achieve the computerization and digitization of the daily system of stud-farm, the immunization system technology, racecourse health monitoring technologies and the stud-farm prevention technologies were combined to built the studfarm daily management system. By using Visual Studio 2008 and Microsoft Office Access 2003, an immunization information system was developed based on Client/Server structure and combined with the key immunization link of horses. The system included studfarm immune management and racecourse health monitoring system. The immune management contained immunization information input, the inquiry of immunization information, immunization statistics, immunization-reminding and system management. The racecourse health monitoring system included stud-farm monitoring, horses monitoring and inquiry and statistics of health monitoring. The software realized the analysis and tips of the daily information in stud-farm. The software could record the appropriate data and carry on the statistics. The stud-farm daily management system greatly improved the efficiency of the expanded program about immunization and horses＇ healthy rearing technique.

Compound diffractive telescope system:design,stray light analysis,and optical test

The compound diffractive telescope is a novel space optical system which combines the structure of compound eyes with diffractive optics and so it has a lighter weight, a wider field of view （FOV）, a lower cost as well as looser fabrication tolerance. In this paper, the design of a compound diffractive telescope composed of one primary lens and twenty-one eyepieces is introduced. Then the influence of diffraction orders on the performance of the system is analysed. A modified phase function model of diffractive optics is proposed to analyse the modulation transfer function （MTF） curves for 0° FOV, which provides a more accurate prediction of the performance of the system. In addition, an optimized mechanism is also proposed to suppress stray light. The star image and resolution tests show that the system can achieve diffraction limit imaging within ±2° of FOV and 4-4 mm of eccentricity. Finally, a series of pictures of an object are taken from different channels, and the splicing of pictures from adjacent FOVs is demonstrated. In summary, the designed system has been proved to have great potential applications.

The Analysis and Research on Design Features of the Modern Campus Sign System

With China's rapid development of the construction of modern campus,the school's increasing popularity and status as well as the growing number of foreign exchange.Current campus information,human development has gradually become a new issue on the development and construction of schools.The article through the analyzing on design features of the modern Campus Sign System to meet the needs of different groups,and the information can be effective used through the modern Campus Sign System between peoples and campus.So that in their daily life,work and other needs are fully met.

Ivar asteroid rendezvous mission system scenario and trajectory design

The asteroid exploration opportunities are searched and calculated with launch dates in 2006 to2010, and with asteroid Ivar 1627 as the target, the spacecraft and its subsystems are designed and analyzed,and the transfer trajectory is designed using △VEGA technology for the asteroid rendezvous. The design resultssatisfied the energy requirements for small explorers.

CAutoCSD-Evolutionary Search and Optimisation Enabled Computer Automated Control System Design

This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of “computer-aided control system design” (CACSD) to novel “computer-automated control system design” (CAutoCSD). The first step towards this goal is to accommodate, under practical constraints, various design objectives that are desirable in both time and frequency domains. Such performance-prioritised unification is aimed at relieving practising engineers from having to select a particular control scheme and from sacrificing certain performance goals resulting from pre-commitment to such schemes. With recent progress in evolutionary computing based extra-numeric, multi-criterion search and optimisation techniques, such unification of LTI control schemes becomes feasible, analytical and practical, and the resultant designs can be creative. The techniques developed are applied to, and illustrated by, three design problems. The unified approach automatically provides an integrator for zero-steady state error in velocity control of a DC motor, and meets multiple objectives in the design of an LTI controller for a non-minimum phase plant and offers a high-performance LTI controller network for a non-linear chemical process.

Data Driven Uncertainty Evaluation for Complex Engineered System Design

Complex engineered systems are often difficult to analyze and design due to the tangled interdependencies among their subsystems and components. Conventional design methods often need exact modeling or accurate structure decomposition, which limits their practical application. The rapid expansion of data makes utilizing data to guide and improve system design indispensable in practical engineering. In this paper, a data driven uncertainty evaluation approach is proposed to support the design of complex engineered systems. The core of the approach is a data-mining based uncertainty evaluation method that predicts the uncertainty level of a specific system design by means of analyzing association relations along different system attributes and synthesizing the information entropy of the covered attribute areas, and a quantitative measure of system uncertainty can be obtained accordingly. Monte Carlo simulation is introduced to get the uncertainty extrema, and the possible data distributions under different situations is discussed in detail The uncertainty values can be normalized using the simulation results and the values can be used to evaluate different system designs. A prototype system is established, and two case studies have been carded out. The case of an inverted pendulum system validates the effectiveness of the proposed method, and the case of an oil sump design shows the practicability when two or more design plans need to be compared. This research can be used to evaluate the uncertainty of complex engineered systems completely relying on data, and is ideally suited for plan selection and performance analysis in system design.

Design and operation problems related to water curtain system forunderground water-sealed oil storage caverns

The underground water-sealed storage technique is critically important and generally accepted for the national energy strategy in China. Although several small underground water-sealed oil storage caverns have been built in China since the 1970s, there is still a lack of experience for large-volume underground storage in complicated geological conditions. The current design concept of water curtain system and the technical instruction for system operation have limitations in maintaining the stability of surrounding rock mass during the construction of the main storage caverns, as well as the long-term stability. Although several large-scale underground oil storage projects are under construction at present in China, the design concepts and construction methods, especially for the water curtain system, are mainly based on the ideal porosity medium flow theory and the experiences gained from the similar projects overseas. The storage projects currently constructed in China have the specific features such as huge scale, large depth, multiple-level arrangement, high seepage pressure, complicated geological conditions, and high in situ stresses, which are the challenging issues for the stability of the storage caverns. Based on years’ experiences obtained from the first large-scale （millions of cubic meters） underground water-sealed oil storage project in China, some design and operation problems related to water curtain system during project construction are discussed. The drawbacks and merits of the water curtain system are also presented. As an example, the conventional concept of “filling joints with water” is widely used in many cases, as a basic concept for the design of the water curtain system, but it is immature. In this paper, the advantages and disadvantages of the conventional concept are pointed out, with respect to the long-term stability as well as the safety of construction of storage caverns. Finally, new concepts and principles for design and construction of the underground water-sealed oil storage caverns are proposed.

Application of Systematic Theory in Design of Mountainous Village Landscape

According to systematic concept,system of mountainous village landscape was divided into landscape systems of natural environment,of humanistic entity,and of humanistic spirit.In the paper,analysis was conducted on characteristics of mountainous village landscape,and more attention was paid to the integrity,correlation,adaptability and dynamic.Present features of mountainous village landscape system were analyzed based on present construction of mountainous village landscape and the result indicated that overall design was absent in the system.Besides,research was carried out on present conditions of the three subsystems and the result indicated that the subsystems were inconsistent.Based on the analysis,suggestions were proposed on design of mountainous village landscape.It is emphasized in many aspects in the paper,such as overall design,rational planning,protection of natural environmental landscape system,improvement of humanistic entity system and inheritance of humanistic spirit system,so that coordinated development of subsystems would be promoted.