Novel Methodologies for Preventing Crack Propagation in Steel Gas Pipelines Considering the Temperature Effect

Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃ to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃ and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.

Kinetic Implication from Temperature Effect on Hydrogen Evolution Reaction at Ag Electrode

Hydrogen evolution reaction （HER） at polycrystalline silver electrode in 0.1 mol/L HClO4 solution is investigated by cyclic voltammetry in the temperature range of 278-333 K. We found that at electrode potential φa,app decreases with φ, while pre-exponential factor A remains nearly unchanged,which conforms well the prediction from Butler-Volmer equation. In contrast, with φ nega-tive shifts from the onset potential for HER to the potential of zero charge （PZC≈-0.4 V）, both Ea,app and A for HER increase （e.g., Ea,app increases from 24 kJ/mol to 32 kJ/mol）. The increase in Ea,app and A with negative shift in φ from -0.25 V to PZC is explained by the increases of both internal energy change and entropy change from reactants to the transition states, which is correlated with the change in the hydrogen bond network during HER. The positive entropy effects overcompensate the adverse effect from the increase in the activation energy, which leads to a net increase in HER current with the activation energy negative shift from the onset potential of HER to PZC. It is pointed out that entropy change may contribute greatly to the kinetics for electrode reaction which involves the transfer of electron and proton, such as HER.

Temperature Effect on Hydrogen Evolution Reaction at Au Electrode

The temperature dependence of hydrogen evolution reaction （HER） at a quasi-single crystalline gold electrode in both 0.1 mol/L HCl04 and 0.1 mol/L KOH solutions was investigated by cyclic voltammetry. HER current displays a clear increase with reaction overpotential （η） and temperature from 278-333 K. In 0.1 mol/L HClO4 the Tafel slopes are found to increases slightly with temperature from 118 mV/dec to 146 mV/dec, while in 0.1 mol/L KOH it is ca. 153±15 mV/dec without clear temperature-dependent trend. The apparent activation energy （Ea） for HER at equilibrium potential is ca. 48 and 34 kJ/mol in 0.1 mol/L HC104 and 0.1 mol/L KOH, respectively. In acid solution, Ea decreases with increase in η, from Ea-37 kJ/mol （η=0.2 V） to 30 kJ/mol （η=0.35 V）. In contrast, in 0.1 mol/L KOH, Ea does not show obvious change with U. The pre-exponential factor （A） in 0.1 mol/L HC104 is ca. 1 order higher than that in 0.1 mol/L KOH. Toward more negative potential, in 0.1 mol/L HC104 A changes little with potential, while in 0.1 mol/L KOH it displays a monotonic increase with U. The change trends of the potential-dependent kinetic parameters for HER at Au electrode in 0.1 mol/L HClO4 and that in 0.1 mol/L KOH are discussed.

Temperature effect on aerobic denitrification and nitrification

Nitrogen loss without organic removal in biofilter was observed and its possible reason was explained. A lower hydraulic loading could improve aerobic denitrification rate. Aerobic denitrification was seriously affected by low temperature(below 10℃). However, nitrification rate remained high when the temperature dropped from 15℃ to 5℃. It seemed the autotrophic biofilm in BAF could alleviate the adverse effect of low temperature.

Temperature effect on the structural strains of an ancient Tibetan building based on long-term monitoring data

Many studies have indicated that structural strain will be significantly influenced by temperature variations,and a good understanding of the effect of temperature on structural strain is essential.A structural health monitoring system has been installed in a typical Tibetan timber building to measure the structural strains and ambient temperature since 2012.This paper presents the correlation between temperature and strain data from the monitored structure.A method combining singular spectrum analysis and polynomial regression is proposed for modeling the temperature induced strains in the structure.Singular spectrum analysis is applied to smooth the temperature data,and the correlation between the resulting temperature time series and the measured strains is obtained by polynomial regression.Parameters of the singular spectrum analysis and the regression model are selected to have the least regression error.Results show that the proposed method has both good reproduction and prediction capabilities for temperature induced strains,and that the method is accurate and effective for eliminating the effect of temperature from the measured strain.A standardized Novelty Index based on the residual strain is also used for the condition assessment of the structure.

Amount and temperature effects responsible for precipitation isotope variation in the southern slope of Himalayas

Seasonal variation of stable isotopes in precipitation of Kathmandu Valley on the southem slope of Himalaya was carried out to understand the controlling mechanism of amount and temperature effect on the basis of one year stable isotope data from 2010 to 2011. Highly depleted isotope values in major rainy period are obtained just after the onset of precipitation in summer, which ac- counts for ＂amount effect＂ due to saturation isotopic compositions in high moisture condition, whereas, the higher values in winter are indicative to regional vapors （temperature effect） recycling of various sources. An abrupt depletion of isotope values in mid- June, indicates the onset date of monsoon precipitation, by the replacement of winter air mass with southem monsoon. Thus, pre- cipitation isotopes are a tool revealing the onset date of summer monsoon and temporal features of variability, in local and regional monsoons precipitations. A comparison of long term monthly values of 5180, temperature, and precipitation with GNIP 6180 data shows the temporal variations of stable isotopes are mostly controlled by amount and temperature effects. During summer mon- soon, the amount effects are stronger for high values of precipitation （R=0.7） and altitude effect appears for low moisture in late rainy season, thus from December to June （winter to pre-monsoon） the controlling features of isotopes remains under the temper- ature effect. A temporal rate of temperature effect is derived as 0.04%0 per year which indicates a dry signal of atmospheric condition and a temperature relation 5180=（0.371±0.08）T＋（0.156±0.05） is obtained from this analysis. The meteoric water lines of Kathmandu before and after monsoon onset of 2011, are found as 5D=（4.36±0.3）5180＋（15.66±1.2） and 5D=（6.91±0.2）S180-（7.92±2.26） from lab samples result, and 5D=9.25180＋11.725 and 5D=8.535180＋16.65 from GNIP data, which lacks the consistency both for slopes and intercepts values for the study period. The mean lapse rate values of δ18O and δD from GNIP data are obtained as -0.002‰/m and -0.015 ‰/m, which indicate the altitudinal effects in regional precipitation of the southern slope of Himalayas. This study estimates new stable isotopes data in recent precipitation using simple methodology which can be important for regional precipitation monitoring systems, environmental change and paleo-climatic studies.

Temperature Effects of Parabolic Linear Bound Potential and Coulomb Bound Potential Quantum Dot Qubit

On the condition of electric-LO phonon strong coupling in a parabolic quantum dot,we obtain theeigenenergy and the eigenfunctions of the ground state and the first-excited state using the variational method ofPekar type.This system in a quantum dot may be employed as a two-level quantum system-qubit.When the electronis in the superposition state of the ground state and the first-excited state,we obtain the time evolution of the electrondensity.The relations of the probability density of electron on the temperature and the electron-LO-phonon couplingconstant and the relations of the period of oscillation on the temperature,the electron-LO-phonon coupling constant,the Coulomb binding parameter and the confinement length are derived.The results show that the probability densityof electron oscillates with a period when the electron is in the superposition state of the ground and the first-excitedstate,and show that there are different laws that the probability density of electron and the period of oscillation changewith the temperature and the electron-LO-phonon coupling constant when the temperature is lower or higher.Andit is obtained that the period of oscillation decreases with increasing the Coulomb bound potential and increases withincreasing the confinement length not only at lower temperatures but also at higher temperatures.

Temperature Effects on the Self-trapping Energy of a Polaron in a GaAs Parabolic Quantum Dot

The temperature and the size dependences of the self-trapping energy of a polaron in a GaAs parabolic quantum dot are investigated by the second order Rayleigh-Schrodinger perturbation method using the framework of the effective mass approximation. The numerical results show that the self-trapping energies of polaron in GaAs parabolic quantum dots shrink with the enhancement of temperature and the size of the quantum dot. The results also indicate that the temperature effect becomes obvious in small quantum dots

Temperature effect on the corrosion and passivation characterization of Ni_(82.3)Cr_7Fe_3Si_(4.5)B_(3.2) alloy in acidic media

The effects of temperature on corrosion and the electrochemical behavior of Ni82.3Cr7Fe3Si4.5B3.2 glassy alloy in HC1,H2SO4,and H3PO4 acids were studied using AC and DC techniques.Impedance data reveal that the susceptibility to localized corrosion increases with increasing temperature.Potentiodynamic polarization curves reveal that the bulk glassy alloy is spontaneously passivated at all the investigated temperature in H2SO4 and H3PO4 solutions.A localized corrosion effect in HCl solution is clearly observed.The apparent activation energies in the regions of Tafel,active,and passive,as well as the enthalpies and entropies of the dissolution process were determined and discussed.The high apparent activation energy（Ea） value for H3PO4 solution in Tafel region is explained by the low aggressivity of PO4^3- ions.

High temperature effects in moving shock reflection with protruding Mach stem

The influence of high temperature effects on the protrusion of Mach stem in strong shock reflection over a wedge was numerically investigated. A two-dimensional inviscid solver applies finite volume method and unstructured quadrilateral grids were employed to simulate the flow. Theoretical analysis was also conducted to understand the phenomenon. Both numerical and theoretical results indicate a wall-jet penetrating forward is responsible for the occurrence of Mach stem protrusion. The protrusion degree seems to depend on the thermal energy buffer capacity of the testing gas. Approaches to increase the energy buffer capacity, such as vibrational relaxation, molecular dissociation, and increase of frozen heat caoacitv, all tend to escalate the orotrusion effect.

Temperature Effect on the Conformation Transition of Ultra-high Molecular Weight Polyethylene/Polypropylene Blends Undergoing Continuous Volume Extensional Flow:A Mesoscopic Simulation

Due to the multiformity and complexity of chain conformation under external flow and the challenge of systematically investigating the transient conformation and dynamic evolution process of polymer chains at the molecular level by means of present experimental techniques,a universal description of both chain conformation and dynamics with respect to continuous volume extensional flow(CVEF)is still absent.Taking into account the temperature effect,we performed dissipative particle dynamics(DPD)simulations with the particles corresponding to the repeat units of polymers over a wide temperature range and analyzed the correlation with the conformational properties of ultra-high molecular weight polyethylene/polypropylene(UHMWPE/PP)blend in response to the CVEF.With time evolution,the polymer chains become highly oriented parallel to the flow direction instead of the initial random coiling and self-aggregation.It is found that a high temperature is necessary for more substantial compactness to take place than low temperature.The low-k plateau and low-k peak in structure factor S(k)curves suggest a low degree of conformational diversity and a high degree of chain stretching.It is also concluded that the intra-molecular C-C bond interaction is the main driving force for the dynamics process of the chain conformations undergoing CVEF,where the motion of the alkyl chains is seriously restricted owing to the increase in bond interaction potential,resulting in a reduction of the difference in diffusion rates among alkyl chains.

Hybrid temperature effect on a quartz crystal microbalance resonator in aqueous solutions

The quartz crystal microbalance（QCM） is an important tool that can sense nanogram changes in mass. The hybrid temperature effect on a QCM resonator in aqueous solutions leads to unconvincing detection results. Control of the temperature effect is one of the keys when using the QCM for high precision measurements. Based on the Sauerbrey＇s and Kanazawa＇s theories, we proposed a method for enhancing the accuracy of the QCM measurement, which takes into account not only the thermal variations of viscosity and density but also the thermal behavior of the QCM resonator. We presented an improved Sauerbrey equation that can be used to effectively compensate the drift of the QCM resonator. These results will play a significant role when applying the QCM at the room temperature.

Temperature effect on dissipative holographic screening-photovoltaic solitons in a biased dissipative system

In a biased dissipative photovoltaic-photorefractive system, this paper investigates the temperature effect on the evolution and the self-deflection of the dissipative holographic screening-photovoltaic （DHSP） solitons. The results reveal that, the evolution and the self-deflection of the bright and dark DHSP solitons are influenced by the system temperature. At a given temperature, for a stable DHSP soliton originally formed in the dissipative system, it attempts to evolve into another DHSP soliton when the temperature change is appropriately small, whereas it will become unstable or break down if the temperature departure is large enough. Moreover, the self-deflection degree of the solitary beam centre increases as temperature rises in some range, while it is decided by the system parameters and is slight under small-signal condition. The system temperature can be adjusted to change the formation and the self-deflection of the solitary beam in order to gain certain optical ends. In a word, the system temperature plays a role for the DHSP solitons in the dissipative system.

Temperature effects on the mechanical properties of slates in triaxial compression test

High geothermal temperatures appear to be unfavorable for the construction of tunnels in slate rocks with high overburden. To investigate the mechanical characteristics of slates at various levels of geothermal temperature, conventional triaxial compression tests at different levels of confining stress were carried out at 4 different temperatures from 20℃ to 120℃. The obtained results show high confining pressures weaken the thermal effects on rock mechanical characteristics while higher temperatures enhance the effect of confining pressure.At higher levels of confining stress the thermal effects on the rock strength characteristics decrease. The higher the temperature, the larger is the effect of confining pressure on the mechanical characteristics of the slate. Increase of temperature leads to a decrease of the peak strength but increases the deformability and ductility of the slate, the thermo effect on the peak strength and Poisson's ratio is larger than on the elastic modulus. Higher temperatures reduce the shear strength of slate, the decrease is mainly caused by a decrease of the cohesion. In general, the slate samples fail in shear failure.

A PROBABILISTIC ASSESSMENT OF TEMPERATURE EFFECTSON THE LOW CYCLE FATIGUE BEHAVIOUR OF 1Cr_(18)Ni_9Ti STEEL WELD METAL

Based on the test results obtained from the single-step test and the incremental-step test at room temperature and 240℃, a probabilistic assessment of temperature effects on the cyclic stress-strum response and the fatigue life of 1Cr18Ni9Ti steel weld metal is performed. In orber to assess the temperature effect on cyclic stress amplitude where there is a scatter of the material cyclic constitution, a probabilistic assessment approach on the basis of probabilistic modified Ramberg-Osgood relations is introduced.The investigation shows that the cyclic stress amplitude and the scatter of cyclic stress amplitude data are decreased at 240℃. Similarly, from the consideration of the fatigue life scatter a probabilistic assessment of temperature effect on the fatigue life is suggested on the basis of probabilistic Langer S-N relations. The investigation shows that the crack initiation life is increased and the scatter of crack initiation life data is decreased at 240℃.

Temperature Effects on Photoluminescence Properties of Porous Silicon

The temperature effects on the photoluminescence(PL) properties of porous silicon(PS) have been observed in the early stage. However, the obtained results are different. Through repeated experiments, some different and useful information are got, which benefits us in that PL properties of porous silicon can be fully made use of. Firstly, samples with porosity of 76% and 49% were chosen to study the exciting temperature effects on the PL spectrum. For the samples with low porosity, the decreasing temperature causes the peak wavelength to be red-shifting and that of the samples with high porosity to present the blue-shifting trend. The light intensity of both reaches the maximum at -10℃. These experimental results can be well explained with the synthesized center PL model based on the quantum confinement model, other than the PL efficiency function σ(λ). Thereafter, PL properties of PS samples fabricated separately under the temperature of -10℃, 0℃, 10℃, 20℃ and 30℃ were studied. The results indicate that with the decrease of the etching temperature, the PL intensity increases from 406.7 to 716.6 and the peak wavelength blue-shifts from 698.9nm to 671.8nm. The WHFM of the PL spectrum dramatically narrows. At the same time, the images observed by AFM show that with the decreasing temperature, the holes are becoming deeper and the porosity is higher, which suggests that the decreasing temperature accelerates the etching rate.

Temperature Effects on Information Capacity and Energy Efficiency of Hodgkin-Huxley Neuron

Recent experimental and theoretical studies show that energy efficiency, which measures the amount of infor- mation processed by a neuron with per unit of energy consumption, plays an important role in the evolution of neural systems. Here we calculate the information rates and energy efficieneies of the Hodgkin-Huxley （HH） neuron model at different temperatures in a noisy environment. It is found that both the information rate and energy efficiency are maximized by certain temperatures. Though the information rate and energy efficiency cannot be maximized simultaneously, the neuron holds a high information processing capacity at the tempera- ture corresponding to the maximal energy efficiency. Our results support the idea that the energy efficiency is a selective pressure that influences the evolution of nervous systems.

A study of temperature effect on Ta+N ion-implanted hardalloy

Hard alloy were implanted with a dudl-ion of nitrogen and tatalum at temperature of 100℃ and 400℃ at a dose of 8×1017 ions cm-2 .Auger electron spectroscopy (AES) was used to determine the nitrogen and tantalum concentration profiles. Microhardness measurements were performed to evaluate the improvements in surface property. The thickness of implanted layers increased by about an order of magnitude when the temperature was elevated from 100℃ to 400 ℃. A higher surface hardness was also obtained in the higher temperature implantation. Scanning electron microscopy (SEM) image showed distinct microstructural changes, and X-ray diffiaction (XRD) analysis showed the presence of nitrides of tantalum and tungsten on the surface implanted.

Measurement and temperature effect on soil thermal conductivity in Changchun area

The study on soil thermal conductivity (STC) was an important side of research on ground source heat pump technique,geological disposal of high-level radioactive wastes,heat distribution of buried cable. Especially owing to technical requirement for shallow terrestrial heat recently, it directly influenced the design and solution in engineering problems. The authors measured the STC in the studied area with QTM-D2 and discussed the effect of samples in size, the measurement error between the samples in lab and in site. The results indicate measuring STC by heat pole method with less influence upon the samples in size, and measuring results on the different geometry size approach very much. The STC is fit for the empirical relation between the temperature and TC under the condition of normal temperature. It is significance for understanding STC in northern China and simulation of temperature field.

Modeling interaction between CO_(2),brine and chalk reservoir rock including temperature effect on petrophysical properties

Carbon dioxide(CO_(2))capture and sequestration through CO_(2)enhanced oil recovery(EOR)in oil reservoirs is one of the approaches considered to reduce CO_(2)emission into the atmosphere.The injection of CO_(2)into a subsurface geological formation may lead to chemical reactions that may affect the formation pore structure and characteristics.In this study,the effect of CO_(2)ebrineerock interaction on the rock petrophysical properties and mineral volume fraction was numerically investigated during CO_(2)injection into a chalk reservoir rock.A 3D numerical modeling and simulation were conducted using COMSOL®Multiphysics commercial software of computational fluid dynamics(CFD)to simulate CO_(2)ebrine core flooding process in a chalk core.The model was validated against a coreescale experimental data from literature.Simulation differential pressure data matched the literature experimental data closely and consistently indicating good agreement between them.Temperature effect on the performance of CO_(2)ebrineechalk sequestration was also evaluated in the present study.Results indicated that porosity was only slightly affected by temperature increase during CO_(2)injection in contrast to permeability that was substantially affected by temperature.Moreover,chemical reactions enhanced as temperature increased leading to significant increase in permeability.Thus,carbonated brine sequestration excelled at elevated temperature due to increased acidity which governs the sequestration process.The developed model maybe considered as a reliable tool to optimize various operating parameters of CO_(2)ebrine sequestration.