Efficient Electromagnetic Wave Absorption and Thermal Infrared Stealth in PVTMS@MWCNT Nano‑Aerogel via Abundant Nano‑Sized Cavities and Attenuation Interfaces

Pre-polymerized vinyl trimethoxy silane(PVTMS)@MWCNT nano-aerogel system was constructed via radical polymerization,sol-gel transition and supercritical CO_(2)drying.The fabricated organic-inorganic hybrid PVTMS@MWCNT aerogel structure shows nano-pore size(30-40 nm),high specific surface area(559 m^(2)g^(−1)),high void fraction(91.7%)and enhanced mechanical property:(1)the nano-pore size is beneficial for efficiently blocking thermal conduction and thermal convection via Knudsen effect(beneficial for infrared(IR)stealth);(2)the heterogeneous interface was beneficial for IR reflection(beneficial for IR stealth)and MWCNT polarization loss(beneficial for electromagnetic wave(EMW)attenuation);(3)the high void fraction was beneficial for enhancing thermal insulation(beneficial for IR stealth)and EMW impedance match(beneficial for EMW attenuation).Guided by the above theoretical design strategy,PVTMS@MWCNT nano-aerogel shows superior EMW absorption property(cover all Ku-band)and thermal IR stealth property(ΔT reached 60.7℃).Followed by a facial combination of the above nano-aerogel with graphene film of high electrical conductivity,an extremely high electromagnetic interference shielding material(66.5 dB,2.06 mm thickness)with superior absorption performance of an average absorption-to-reflection(A/R)coefficient ratio of 25.4 and a low reflection bandwidth of 4.1 GHz(A/R ratio more than 10)was experimentally obtained in this work.

Thermal-mechanical response of microscale functional film for infrared window

Infrared window in hypersonic missile usually suffers complex aerodynamic force/heat during high-speed flight.A finite element method was adopted to simulate the thermal and stress response of microscale functional film for infrared window under different aerodynamic heats/forces conditions.Temperature and stress distribution were obtained with different heat fluxes.There is almost constant stress distribution along the film thickness except a sudden decrease near the substrate.The maximum stresses are located at the points which are 0.3 mm away from the edges.Different film materials result in different stress values.The temperature and stress in ZrN are larger than those in Y2O3.Besides the numerical simulation,an oxygen propane flame jet impingement test was performed to investigate thermal shock failure of the infrared window.Some place of the window surface has spots damage and some place has line crack damage after thermal shock.

Sea ice thickness analyses for the Bohai Sea using MODIS thermal infrared imagery

Level ice thickness distribution pattern in the Bohai Sea in the winter of 2009-2010 was investigated in this paper using MODIS night-time thermal infrared imagery. The cloud cover in the imagery was masked out manually. Level ice thickness was calculated using MODIS ice surface temperature and an ice surface heat balance equation. Weather forcing data was from the European Centre for Medium-Range Weather Forecasts （ECMWF） analyses. The retrieved ice thickness agreed reasonable well with in situ observations from two off-shore oil platforms. The overall bias and the root mean square error of the MODIS ice thickness are -1.4 cm and 3.9 cm, respectively. The MODIS results under cold conditions （air temperature 〈 -10~C） also agree with the estimated ice growth from Lebedev and Zubov models. The MODIS ice thickness is sensitive to the changes of the sea ice and air temperature, in particular when the sea ice is relatively thin. It is less sensitive to the wind speed. Our method is feasible for the Bohai Sea operational ice thickness analyses during cold freezing seasons.

Utilization of Thermal Infrared Image for Inversion of Winter Wheat Yield and Biomass

The present paper utilizes thermal infrared image for inversion of winter wheat yield and biomass with different technology of irrigation(drip irrigation,sprinkler irrigation,flood irrigation).It is the first time that thermal infrared image is used for predicting the winter wheat yield and biomass.The temperature of crop and background was measured by thermal infrared image.It is necessary to get the crop background separation index(CBSIL,CBSIH),which can be used for distinguishing the crop value from the image.CBSIL and CBSIH(the temperature when the leaves are wet adequately;the temperature when the stomata of leaf is closed completely) are the threshold values.The temperature of crop ranged from CBSIL to CBSIH.Then the ICWSI was calculated based on relevant theoretical method.The value of stomata leaf has strong negative correlation with ICWSI proving the reliable value of ICWSI.In order to construct the high accuracy simulation model,the samples were divided into two parts.One was used for constructing the simulation model,the other for checking the accuracy of the model.Such result of the model was concluded as:(1) As for the simulation model of soil moisture,the correlation coefficient(R2) is larger than 0.887 6,the average of relative error(Er) ranges from 13.33% to 16.88%;(2) As for the simulation model of winter wheat yield,drip irrigation(0.887 6,16.89%,-0.12),sprinkler irrigation(0.970 0,14.85%,-0.12),flood irrigation(0.969 0,18.87%,0.18),with the values of R2,Er and CRM listed in the parentheses followed by the individual term.(3) As for winter wheat biomass,drip irrigation(0.980 0,13.70%,0.13),sprinkler irrigation(0.95,13.15%,-0.14),flood irrigation(0.970 0,14.48%,-0.13),and the values in the parentheses are demonstrated the same as above.Both the CRM and Er are shown to be very low values,which points to the accuracy and reliability of the model investigated.The accuracy of model is high and reliable.The results indicated that thermal infrared image can be used potentially for inversion of winter wheat yield and biomass.

Resistivity and thermal infrared precursors associated with cemented backfill mass

The stability of cemented backfill mass is important to keep miners and equipment safe in underground backfill miming.The stress-strain behavior, resistivity and thermal infrared(TIR) characteristics of backfill mass under uniaxial compression were investigated. The monitoring system consisted of a TIR observation system, a stress-strain monitoring system and a resistivity measurement system. Precursory information for impending failure of cemented backfill mass was collected, including TIR, strain and resistivity precursors. The sensitivity and difference of different monitoring information to the same failure event were compared.The results show that the time-space evolution process of the resistivity and TIR is basically the same as the whole process from compression deformation to failure of backfill mass, and the time variation of resistivity and TIR is obviously characterized by stage.The resistivity precursor turns out earlier than the TIR and the strain. The resistivity relation with loading compression is anti-symmetry, decreasing as the compression stress increases before the peak strength of backfill mass. However, when the backfill mass enters into the phase of failure, the resistivity starts to increase as the stress increases. The change of the resistivity growth direction can be regarded as the resistivity-caution-point for the failure of backfill mass under uniaxial compression. It is also indicated that the TIR information mainly represents the surface temperature evolution in the process of compression before the backfill enters into the plastic-yield state. It can be a valuable tool to obtain the precursors for failure of cemented backfill mass for backfill mines.

Satellite Thermal Infrared Earthquake Precursor to the Wenchuan M_s 8.0 Earthquake in Sichuan,China,and its Analysis on Geo-dynamics

Based on an interpretation and study of the satellite remote-sensing images of FY-2C thermal infrared 1st wave band （10.3-11.3 μm） designed in China, the authors found that there existed obvious and isolated satellite thermal infrared anomalies before the 5.12 Wenchuan Ms 8.0 Earthquake. These anomalies had the following characteristics： （1） The precursor appeared rather early： on March 18, 2008, i.e., 55 days before the earthquake, thermal infrared anomalies began to occur; （2） The anomalies experienced quite many and complex evolutionary stages： the satellite thermal infrared anomalies might be divided into five stages, whose manifestations were somewhat different from each other. The existence of so many anomaly stages was probably observed for the first time in numerous cases of satellite thermal infrared research on earthquakes; （3） Each stage lasted quite a long time, with the longest one spanning 13 days; （4） An evident geothermal anomaly gradient was distributed along the Longmen seismic fracture zone, and such a phenomenon might also be discovered for the first time in satellite thermal infrared earthquake research. This discovery is therefore of great guiding and instructive significance in the study of the earthquake occurrence itself and the trend of the postearthquake phenomena.

Multifunctional MXene/Carbon Nanotube Janus Film for Electromagnetic Shielding and Infrared Shielding/Detection in Harsh Environments

Multifunctional,flexible,and robust thin films capable of operating in demanding harsh temperature environments are crucial for various cutting-edge applications.This study presents a multifunctional Janus film integrating highly-crystalline Ti_(3)C_(2)T_(x) MXene and mechanically-robust carbon nanotube(CNT)film through strong hydrogen bonding.The hybrid film not only exhibits high electrical conductivity(4250 S cm^(-1)),but also demonstrates robust mechanical strength and durability in both extremely low and high temperature environments,showing exceptional resistance to thermal shock.This hybrid Janus film of 15μm thickness reveals remarkable multifunctionality,including efficient electromagnetic shielding effectiveness of 72 dB in X band frequency range,excellent infrared(IR)shielding capability with an average emissivity of 0.09(a minimal value of 0.02),superior thermal camouflage performance over a wide temperature range(−1 to 300℃)achieving a notable reduction in the radiated temperature by 243℃ against a background temperature of 300℃,and outstanding IR detection capability characterized by a 44%increase in resistance when exposed to 250 W IR radiation.This multifunctional MXene/CNT Janus film offers a feasible solution for electromagnetic shielding and IR shielding/detection under challenging conditions.

STUDY ON TRANSMISSION MECHANISM OF THERMAL INFRARED REMOTE SENSING FOR ABRUPT GEOTHERMAL ANOMALY IN VOLCANIC REGION

Experiment researches have proven that there is an obvious phenomenon of abrupt geothermal anomaly in volcanic region in the forewarning period of volcano eruption, which is closely related to the geological structure, the cause, the scale and the type of volcano etc. On the other hand, this kind of geothermal anomaly is an important sign to monitor volcano activity by thermal infrared remote sensing techniques. This paper discusses the feature of abrupt geothermal anomaly, the transmission mechanism of geothermal anomaly and the radiation transmission mechanism of heat field of terrene in volcanic region. By analyzing mechanism of terrene temperature rising by way of conduction and convection of heat, we have presented the transmission equation of atmosphere for thermal infrared radiation based on the effective radiation of objects. The related problems of noise interference in the processes of transmission for thermal infrared radiation will be discussed in the later paper.

Heat transfer and temperature evolution in underground mininginduced overburden fracture and ground fissures: Optimal time window of UAV infrared monitoring

Heat transfer and temperature evolution in overburden fracture and ground fissures are one of the essential topics for the identification of ground fissures via unmanned aerial vehicle(UAV) infrared imager. In this study, discrete element software UDEC was employed to investigate the overburden fracture field under different mining conditions. Multiphysics software COMSOL were employed to investigate heat transfer and temperature evolution of overburden fracture and ground fissures under the influence of mining condition, fissure depth, fissure width, and month alternation. The UAV infrared field measurements also provided a calibration for numerical simulation. The results showed that for ground fissures connected to underground goaf(Fissure Ⅰ), the temperature difference increased with larger mining height and shallow buried depth. In addition, Fissure Ⅰ located in the boundary of the goaf have a greater temperature difference and is easier to be identified than fissures located above the mining goaf. For ground fissures having no connection to underground goaf(Fissure Ⅱ), the heat transfer is affected by the internal resistance of the overlying strata fracture when the depth of Fissure Ⅱ is greater than10 m, the temperature of Fissure Ⅱ gradually equals to the ground temperature as the fissures’ depth increases, and the fissures are difficult to be identified. The identification effect is most obvious for fissures larger than 16 cm under the same depth. In spring and summer, UAV infrared identification of mining fissures should be carried out during nighttime. This study provides the basis for the optimal time and season for the UAV infrared identification of different types of mining ground fissures.

Developing selective mining capability for longwall shearers using thermal infrared-based seam tracking

Longwall mining continues to remain the most efficient method for underground coal recovery. A key aspect in achieving safe and productive longwall mining is to ensure that the shearer is always correctly positioned within the coal seam. At present, this machine positioning task is the role of longwall personnel who must simultaneously monitor the longwall coal face and the shearer's cutting drum position to infer the geological trends of the coal seam. This is a labour intensive task which has negative impacts on the consistency and quality of coal production. As a solution to this problem, this paper presents a sensing method to automatically track geological coal seam features on the longwall face, known as marker bands, using thermal infrared imaging. These non-visible marker bands are geological features that link strongly to the horizontal trends present in layered coal seams. Tracking these line-like features allows the generation of a vertical datum that can be used to maintain the shearer in a position for optimal coal extraction. Details on the theory of thermal infrared imaging are given, as well as practical aspects associated with machine-based implementation underground. The feature detection and tracking tasks are given with real measurements to demonstrate the efficacy of the approach. The outcome is important as it represents a new selective mining capability to help address a long-standing limitation in longwall mining operations.

INFRARED THERMAL IMAGE STUDY ON THE FOREWARNING OF COAL AND SANDSTONE FAILURE UNDER LOAD

In the experimental study, AGE-782 thermal instrument was used to detect the infrared radiation variation of coal and sandstone (wave-length range 3.6～5.5 μm was used). It's discovered that coal and sandstone failure under load have three kinds of infrared thermal features as well as infrared forewarning messages. That are: (1) temperature rises gradually but drops before failure ; (2) temperature rises gradually but quickly rises before failure; (3) first rises,then drops and lower temperature emerges before failure. The further researches and the prospect of micro-wave remote sensing detection .on ground pressure is also discussed.

Research on the Estimation Model of Soil Moisture Content Based on the Characteristics of Thermal Infrared Data

With the portable Fourier Transform Infrared Spectroscopy (FTIR), the reflectance spectra of soil samples with different moisture content are measured in laboratory for expounding the characteristic of radiation in the thermal infrared part of the spectrum with different soil moisture content. A model of estimating the moisture content in soil is attempted to make based on Moisture Diagnostic Index (MDI). In general,the spectral characteristic of soil emissivity in laboratory includes the following aspects.Firstly,in the region of 8.0-9.5 μm,along with the increase of soil moisture content,the emissivity of soil increases to varying degrees. The spectral curves are parallel relatively and have a tendency to become horizontal and the absorbed characteristic of reststrahlen is also weakened relatively with the increase of soil moisture in this region.Secondly,in the region of 11.0-14.0 μm,the emissivity of soil has a tendency of increasing.There is an absorption value near about 12.7 μm. As the soil moisture content increases,the depth of absorption also increases. This phenomenon may be caused by soil moisture absorption. Methods as derivative, difference and standardized ratio transformation may weaken the background noise effectively to the spectrum data. Especially using the ratio of the emissivity to the average of 8-14 μm may obviously enhance the correlation between soil moisture and soil emissivity. According to the result of correlation analysis, the 8.237 μm is regarded as the best detecting band for soil moisture content. Moreover,based on the Moisture Diagnostic Index ( MDI) in the 8.194-8.279 μm, the logarithmic model of estimating soil moisture is made.

Probable satellite thermal infrared anomaly before the Zhangbei M_s=6.2 earthquake on January 10, 1998

This paper used the thermal infrared data of the satellite NOAA-AAVHRR of the north pat of North China (113°~119°E, 38°~42°N), and processed the remote sensing data through radiation adjustment, geometric adjust ment and so on by the software 'The Monitoring and Fast Process System of Earthquake Precursor Thermal Infra red Anomaly', inversed the each surface temperature. Some disturbances effect had been excluded, and thermal infrared temperature anomaly had been extracted by the picture difference method. The Zhangbei M_s=6.2 earth quake is used as the example in the paper, so that in the paper thermal infrared characteristics on time-space before earthquake and the relationship between the anomaly and the earthquake prediction have been summarized. Within more than ten days before the Zhangbei earthquake, the thermal infrared anomaly had emerged widely along Zhangjiakou-Bobal seismic belt, and the anomalous region seemed like a belt and it is also consistent with the tectonic background there; the anomaly expanded from the outside toward the earthquake focus, but the focus lay at the edge of the thermal infrared region. So it is possible to explore a new anomaly observation method for earthquake prediction by observing and studying the satellite thermal infrared anomaly before big earthquakes happen.

Modeling co-seismic thermal infrared brightness anomalies in petroliferous basins surrounding the North and East of the Qinghai–Tibet Plateau

Co-seismic gas leakage usually occurs on the edge of seismic faults in petroliferous basins,and it may have an impact on the local environment,such as the greenhouse effect,which can cause thermal infrared brightness anomalies.Using wavelet transform and power spectrum estimation methods,we processed brightness temperature data from the Chinese geostationary meteorological satellite FY-C/E.We report similarities between the co-seismic thermal infrared brightness(CTIB)anomalies before,during and after earthquakes that occurred at the edges of the Sichuan,Tarim,Qaidam,and Junggar basins surrounding the North and East of the Qinghai–Tibet Plateau in western China.Additionally,in each petroliferous basin,the area of a single CTIB anomaly accounted for 50%to 100%of the basin area,and the spatial distribution similarities in the CTIB anomalies existed before,during and after these earthquakes.To better interpret the similarities,we developed a basin warming effect model based on geological structures and topography.The model suggests that in a petroliferous basin with a subsurface gas reservoir,gas leakage could strengthen with the increasing stress before,during,and even after an earthquake.The accumulation of these gases,such as the greenhouse gases CH4 and CO2,results in the CTIB anomalies.In addition,we conclude that the CTIB anomalies are strengthened by the high mountains(altitude^5000 m)around the basins and the basins’independent climatic conditions.This work provides a new perspective from which to understand the CTIB anomalies in petroliferous basins surrounding the North and East of the Qinghai–Tibet Plateau.

Improving wavelet reconstruction algorithm to achieve comprehensive application of thermal infrared remote sensing data from TM and MODIS

According to the data characteristics of Landsat thematic mapper （TM） and MODIS, a new fu sion algorithm about thermal infrared data has been proposed in the article based on improving wave let reconstruction. Under the domain of neighborhood wavelet reconstruction, data of TM and MO DIS are divided into three layers using wavelet decomposition. The texture information of TM data is retained by fusing highfrequency information. The neighborhood correction coefficient method （NC CM） is set up based on the search neighborhood of a certain size to fuse lowfrequency information. Thermal infrared value of MODIS data is reduced to the space value of TM data by applying NCCM. The data with high spectrum, high spatial and high temporal resolution, are obtained through the al gorithm in the paper. Verification results show that the texture information of TM data and high spec tral information of MODIS data could be preserved well by the fusion algorithm. This article could provide technical support for high precision and fast extraction of the surface environment parame ters.

The study of using infrared thermal image to assist surgery of coronary artery bypass

Digital infrared thermography is suitable for monitoring the planar two-dimensional temperature distribution of curved surfaces of objects by sensing their infrared radiation. Cardiac infrared thermography also has a thermal coronary angiography alias. This study proposes a digital image processing methodology for locating blood clot blockage. This methodology contains four consequent processes. The two-dimensional gray scale infrared thermograph pixels are first binarized and classified as background or coronary arteries using multi-thresh adaptive segmentation.The coronary artery contours are extracted from segmented raw pixels using continuous pepper-like pixel removal,erosion,subtraction,recursive neighborhood visiting,contour point-list construction and short edge deletion.In the third process one coronary artery branch is selected by physicians for calculating the longest curved central axis using morphological thinning and neighborhood analysis. In the last process the nearest left and right distances from each pixel along the directional central axis to its corresponding boundary contour are added as the coronary artery variable diameter at the current pixel's position. A variable diameter versus straighten length diagram along this axial curved path is plotted to provide useful physiological information to the physician. An obstruction rate equation is then defined to calculate the possible vascular blockage positions with the local minimal rates. Finally,preoperative cases are tested to prove the predictive positions are correct in comparison to individual patient myocardial perfusion imaging.

New Progress in the Application of Satellite Thermal Infrared Imagery to Earthquake Prediction

The concept of stochastic resonance (SR) has been introduced into the analysis of satellite thermal infrared images. Six kinds of anomalous phenomena related to crustal movement were recognized in satellite thermal infrared images. Six diagnostic indicators for the prediction of global earthquakes with magnitude ≥6.0 and their quantitative evaluation standards have been established. The microscopic behavior of global crustal movement is successfully controlled by using satellite thermal infrared imagery, and the occurrence time and magnitude of over 80% of global strong earthquakes occurred since the foundation of the observation station have been successfully predicted. It is believed that the combination of satellite thermal infrared information with macroscopic anomalous phenomena will play an important role in earthquake hazard reduction.

Optimization Design of Thermal Conduction Enhanced PCM Plates for Simulating the Infrared Signature of Steel Plate

Phase change material(PCM) can be used to prepare the infrared false targets for realizing all-weather passive infrared decoy,but its low thermal conductivity is a great blockage to the simulation of the infrared signature of thick metal plates.For that reason,a method of simulating the infrared signature of thick steel plates by thermal conduction enhanced PCM,including the aluminum fins,is proposed.A physical and mathematic model is set up,and the infrared signature simulation of thick steel plate is investigated numerically.The effects of the distribution density and thickness of fins and the thickness of PCM plate on the simulation results are discussed,and the reasonable construction parameters of PCM plates used to simulate the steel plates of different thickness are obtained.

The Splittings of p_± States in Infrared Spectra of Thermal Donors in Silicon

p -type CZ silicon crystals annealed at 450℃ have been investigated by low temperature infrared spectroscopy with high resolusion. It has been shown that the 2p± and 3p± bands of neutral thermal donors TD~° are all split into two bands, which have not been reported before. In addition, the concentrations ofindi- vidual TD_i and total TD have been derived from the heights of 2po bands, and the boron concentrations de- rived from that of 320 cm^(-1) band. The room temperature resistivities of samples have been evaluated and the comparison with practically measured resistivities have been made.

Formation cause of thermal infrared high temperature belt along Honghe fault and its relation to earthquakes

Aiming at two Dayao earthquakes with magnitude more than 6 occurred in 2003 in Yunnan Province, we analyzed and interpreted the NOAA satellite thermal infrared images of 1999, 2003 and 2004 in Chuandian region, and also calculated the annual variation of brightness temperature of the hot belt along Honghe fault to explore the formation cause of the high temperature belt and its relation to the earthquakes. The results show that the high temperature belt along Honghe fault is caused by geographic environment factors, such as water system and terrain. But the annual average brightness temperature of the belt in earthquake year of 2003 is clearly higher than that in no earthquake years of 1999 and 2004, this maybe indicates that the thermal activities of Honghe fault increase in earthquake years, and can cause the annual variation anomaly of brightness temperature. We can detect and monitor this thermal activities of Honghe fault before earthquake by analyzing and comparing the relative changes of thermal infrared brightness temperature of the hot belt in different years.