Semitransparent Organic Solar Cells with Superior Thermal/Light Stability and Balanced Efficiency and Transmittance

Semitransparent organic solar cells show attractive potential in the application of building-integrated photovoltaics,agrivoltaics,floating photovoltaics,and wearable electronics,as their multiple functionalities of electric power generation,photopermeability,and color tunability.Design and exploration of semitransparent organic solar cells with optimal and balanced efficiency and average visible light transmittance and simultaneously high stability are in great demand.In this work,based on a layer-by-layer-processed active layer and an ultrathin metal electrode,inverted semitransparent organic solar cells(ITO/AZO/PM6/BTP-eC9/MoO_(3)/Au/Ag)were fabricated.Optimal and balanced efficiency and average visible light transmittance were demonstrated,and simultaneously promising thermal and light stability were achieved for the obtained devices.The power conversion efficiency of 13.78-12.29%and corresponding average visible light transmittance of 14.58-25.80%were recorded for the ST-OSC devices with 25-15 nm thick Ag electrodes,respectively.Superior thermal and light stability with~90%and~85%of initial efficiency retained in 400 h under 85°C thermal stress and AM1.5 solar illumination were demonstrated,respectively.

Miscibility of light oil and flue gas under thermal action

The miscibility of flue gas and different types of light oils is investigated through slender-tube miscible displacement experiment at high temperature and high pressure.Under the conditions of high temperature and high pressure,the miscible displacement of flue gas and light oil is possible.At the same temperature,there is a linear relationship between oil displacement efficiency and pressure.At the same pressure,the oil displacement efficiency increases gently and then rapidly to more than 90% to achieve miscible displacement with the increase of temperature.The rapid increase of oil displacement efficiency is closely related to the process that the light components of oil transit in phase state due to distillation with the rise of temperature.Moreover,at the same pressure,the lighter the oil,the lower the minimum miscibility temperature between flue gas and oil,which allows easier miscibility and ultimately better performance of thermal miscible flooding by air injection.The miscibility between flue gas and light oil at high temperature and high pressure is more typically characterized by phase transition at high temperature in supercritical state,and it is different from the contact extraction miscibility of CO_(2) under conventional high pressure conditions.

Operation optimization of prefabricated light modular radiant heating system:Thermal resistance analysis and numerical study

The utilization of prefabricated light modular radiant heating system has demonstrated significant increases in heat transfer efficiency and energy conservation capabilities.Within prefabricated building construction,this new heating method presents an opportunity for the development of comprehensive facilities.The parameters for evaluating the effectiveness of such a system are the upper surface layer’s heat flux and temperature.In this paper,thermal resistance analysis calculation based on a simplified model for this unique radiant heating system analysis is presented with the heat transfer mechanism’s evaluation.The results obtained from thermal resistance analysis calculation and numerical simulation indicate that the thermal resistance analysis method is highly accurate with temperature discrepancies ranging from 0.44℃ to−0.44℃ and a heat flux discrepancy of less than 7.54%,which can meet the requirements of practical engineering applications,suggesting a foundation for the prefabricated radiant heating system.

The Application of Intelligent Lighting in Thermal Power Plants

With the rapid development of electronic information technology,the Internet of Things(IoT),Internet technology,and modern communication technology,people are demanding higher standards for the building environment.Especially in modern large-scale buildings with high levels of industrialization,lighting systems should also be optimized accordingly.This article explores the application path of intelligent lighting in thermal power plants for reference.

Thermal nitridation of triazine motifs to heptazine-based carbon nitride frameworks for use in visible light photocatalysis

A thermal nitridation route for the assembly and polymerization of molecular triazine units to heptazine-based covalent frameworks has been successfully established. The obtained conjugated carbon nitride polymers feature nanostructures that show enhanced photocatalytic reactivity for hydrogen production under visible light irradiation.

人LIGHT和HSV-TK-EGFP基因共转染的MSCs抗肿瘤免疫的体内研究

目的研究与单纯疱疹病毒的糖蛋白D竞争结合单纯疱疹病毒进入介导物(herpes virus entry mediator,HVEM)的淋巴毒素类似物(homologous to lymphotoxins,exhibits inducible expression,and competes with HSV glycoprotein D for HVEM,a receptor expressed by T lymphocytes,LIGHT)基因和单纯疱疹病毒胸苷激酶(herpes simplex virus thymidine kinase,HSV-TK)基因共转染的骨髓间充质干细胞(mesenchymal stem cells,MSCs)在体内的抗肿瘤免疫功能。方法将pIRES2-LIGHT基因和HSV-TK-EGFP基因共转染小鼠骨髓间充质干细胞(MSCs/LT组),以转染空载体和转染HSV-TK-EGFP基因的骨髓间充质干细胞作对照。流式细胞仪检测LIGHT分子和HSV-TK-EGFP分子在稳定转染的骨髓间充质干细胞上的表达。体内迁移实验观察MSCs/LT在小鼠体内迁移情况。观察更昔洛韦注射前后MSCs/LT对荷瘤小鼠体内肿瘤的治疗作用。ELISA法检测小鼠肿瘤组织中IFN-γ,IL-2和IL-10的水平。结果流式细胞仪检测发现,MSCs/LT能稳定高表达LIGHT分子。MSCs/LT有特异地向肿瘤组织趋化的特性。MSCs/LT和MSCs/T有较好的抑制肿瘤生长的能力,但在更昔洛韦诱导后,MSCs/LT的抗肿瘤效应下降甚至消失。同时,MSCs/LT可促使T细胞进入肿瘤组织,并促进T细胞分泌IL-2、IFN-γ,抑制IL-10分泌(P<0.05)。结论共转染人LIGHT和HSV-TK-EGFP基因的骨髓间充质干细胞能稳定高表达LIGHT分子,能特异性地向荷瘤小鼠体内肿瘤组织趋化并抑制肿瘤的生长,这种体内抗肿瘤功能可能与促进T淋巴细胞IL-2、IFN-γ等细胞因子的分泌,改善局部免疫抑制环境有关。

Resolution and noise in ghost imaging with classical thermal light

The resolution and classical noise in ghost imaging with a classical thermal light are investigated theoretically. For ghost imaging with a Gaussian Schell model source, the dependences of the resolution and noise on the spatial coherence of the source and the aperture in the imaging system are discussed and demonstrated by using numerical simulations. The results show that an incoherent source and a large aperture will lead to a good image quality and small noise.

High-order ghost imaging with N-colour thermal light

High-order ghost imaging with thermal light consisting of N different frequencies is investigated. The high-order intensity correlation and intrinsic correlation functions are derived for such N-colour light. It is found that they are similar in form to those for the monochromatic case, thus most of the conclusions we obtained previously for monochromatic Nth-order ghost imaging are still applicable. However, we find that the visibility of the N-colour ghost image depends strongly on the wavelength used to illuminate the object, and increases as this wavelength increases when the test arm is fixed. On the contrary, changes of wavelength in the reference arms do not lead to any change of the visibility.

Preparation of Ultra-light Xonotlite Thermal Insulation Material Using Carbide Slag

Using carbide slag as the calcareous materials, xonotlite thermal insulation material was successfully prepared via dynamic hydrothermal synthesis. The experimental results show that the xonotlite thermal insulation material is made up of large numbers of ＂chestnut bur shape＂ particles. Optimum conditions of calcination temperature of carbide slag, synthesis reaction temperature and time, stirring rate, CaO/SiO2 mol ratio, water/solid weight ratio, amount of fiberglass, molding pressures, dryness temperatures and the presence of dispersant （glycol and polyvinyl alcohol） favor the preparation of xonotlite thermal insulation material. The evaluation of xonotlite thermal insulation material reveals that the product is ultra-light and excellent in physical performances. Such a little amount of impurities in carbide slag has no effect on the phase, morphology, stability at high temperature and physical performances of products.

N-doped NaTaO3 synthesized from a hydrothermal method for photocatalytic water splitting under visible light irradiation

NaTaONcatalysts were synthesized by a hydrothermal（H） and a solid-state（S） methods in this study.The H-and S-NaTaONsamples were characterized by X-ray diffraction（XRD）, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, UV–visible（UV–vis） diffuse reflectance spectroscopy, and photoluminescence（PL） spectroscopy. The XRD patterns of the H-and S-samples showed peaks indexed to the pure phase of perovskite NaTaOand minor peaks assignable to TaNat various synthesis temperatures. Substitution of oxygen by nitrogen ions causes the light absorption of the H-and S-NaTaONsamples to be extended to the 600–650 nm region, thus making the samples visible-light active. The NaTaONsamples exhibited photocatalytic activity for Hand Oevolution from aqueous methanol and silver nitrate solutions under visible-light irradiation. The UV–vis and PL spectra of the Hand S-catalysts revealed the presence of cationic vacancies and reduced metallic species, which acted as recombination centers. These results demonstrated that the preparation method plays a critical role in the formation of defect states, thereby governing the photocatalytic activity of the NaTaONcatalysts.

Oxidization characteristics and thermal miscible flooding of high pressure air injection in light oil reservoirs

Physical modeling,numerical simulation and field case analysis were carried out to find out the subsurface thermal oxidation state,thermal oxidation front characteristics and production dynamic characteristics of high pressure air injection thermal oxidation miscible flooding technology.The lighter the composition and the lower the viscosity of the crude oil,the lower the fuel consumption and the combustion temperature are.The thermal oxidation front of light oil and volatile oil can advance stably,and a medium-temperature thermal oxidation stable displacement state can be formed in the light oil reservoir under high pressure conditions.With strong thermal gasification and distillation,light oil and volatile oil are likely to form a single phase zone of gasification and distillation with thermal flue gas at the high-temperature and high-pressure heat front,finally,an air-injection thermal miscible front.In light oil reservoirs,the development process of high-pressure air-injection thermal miscible flooding can be divided into three stages:boosting pressure stage,low gas-oil ratio and high-efficiency stable production stage and high gas-oil ratio production stage.Approximately 70%of crude oil is produced during the boosting pressure stage and low gas-oil ratio high-efficiency and stable production stage.

Thermal Insulation and Strength of Autoclaved Light Concrete

The primary objective of this study was to develop an autoclaved light concrete （ALC） material with ultra-thermal insulation property and to investigate the relationship between its physical characteristics and mechanical properties. Through tests of dry bulk density and compressive strength, relationship of physical characteristics and mechanical properties of samples were studied, resulting in a material with ultra-thermal insulation property. Scanning electron microscope （SEM） and energy-dispersive X-ray spectroscopy （EDX） were applied to analyze the micro-morphology and elemental composition of samples. To identify the product phases, X-ray diffraction （XRD） was engaged. The test results showed that compressive strength and thermal coefficient were reduced with the increasing of aluminum powder within the mixtures. As a result the optimal thermal coefficient and compressive strength of samples were improved to 0.061 W/（m·k） and 1.2 MPa, respectively. SEM, EDX and XRD analyses showed that calcium silicate hydrate and tobermorite crystal were main resultant phases.

Thermal diffusivity of light-emitting diode packaging material determined by photoacoustic piezoelectric technique

Thermal property is one of the most important properties of light-emitting diode （LED）. Thermal property of LED packaging material determines the heat dissipations of the phosphor and the chip surface, accordingly having an influence on the light-emitting efficiency and the life-span of the device. In this paper, photoacoustic piezoelectric （PAPE） technique has been employed to investigate the thermal properties of polyvinyl alcohol （]？VA） and silicon dioxide, which are the new and the traditional packaging materials in white LED, respectively. Firstly, the theory of PAPE technique has been developed for two-layer model in order to investigate soft materials; secondly, the experimental system has been set up and adjusted by measuring the reference sample; thirdly, the thermal diffusivities of PVA and silicon dioxide are measured and analysed. The experimental results show that PVA has a higher thermal diffusivity than silicon dioxide and is a better packaging material in the sense of thermal diffusivity for white LED.

Harvesting,sensing and regulating light based on photo-thermal effect of Cu@CuO mesh

A system of light harvesting, sensing and regulating was designed based on the photo-thermal and Seebeck effect of flexible CuO nanostructures. Cu@CuO meshes were prepared via self-oxidation of Cu mesh and utilized as the photo-thermal material. Upon irradiation by visible light, the temperature of the Cu@CuO mesh dramatically increases. The temperature difference between the irradiated and non-irradiated parts of the Cu@CuO mesh produced a measurable voltage output due to the Seebeck effect. The generated voltage was then converted into a digital signal to control a rotary neutral-density disc to filter the received light. This enabled regulation of the intensity of the incident light at a selected region. This system is cost effective and has potential applications in greenhouses, factories and smart buildings to minimize energy consumption and improve wellbeing.

Impact of light-weight external thermal insulation materials on building surrounding thermal environment in summer

The method for calculating wall surface heat storage coefficient was introduced,and the coefficients of several common walls with light-weight external thermal insulation materials and the traditional solid clay brick wall were calculated.In order to study the impact of light-weight external thermal insulation materials,a contrasting experiment was carried out between an external insulated room and an uninsulated room in August,2010,in Chongqing,China.The result shows that outside surface heat storage coefficient of the insulated wall is much less than that of the traditional wall.However,during sunny time,the surface temperature of external walls of the insulated room is obviously higher than that of the uninsulated room.In different orientations,due to different amounts of solar radiation and being irradiated in different time,the contrasting temperature difference(CTD) appears different regularity.In a word,using light-weight external thermal insulation materials has a negative impact on building surrounding thermal environment and people's health.Finally,some suggestions on how to eliminate the impact,such as improving the surface condition of the building envelop,and plating vertical greening,are put forward.

Enhancement of Frster energy transfer from thermally activated delayed fluorophores layer to ultrathin phosphor layer for high color stability in non-doped hybrid white organic light-emitting devices

Fluorescence/phosphorescence hybrid white organic light-emitting devices（WOLEDs） based on double emitting layers（EMLs） with high color stability are fabricated.The simplified EMLs consist of a non-doped blue thermally activated delayed fluorescence（TADF） layer using 9,9-dimethyl-9,10-dihydroacridine-diphenylsulfone（DMAC-DPS） and an ultrathin non-doped yellow phosphorescence layer employing bis[2-（4-tertbutylphenyl）benzothiazolato-N,C2＇]iridium（acetylacetonate）（（tbt）_2Ir（acac））.Two kinds of materials of 4,7-diphenyl-1,10-phenanthroline（Bphen） and 1,3,5-tris（2-Nphenylbenzimidazolyl） benzene（TPBi） are selected as the electron transporting layer（ETL）,and the thickness of yellow EML is adjusted to optimize device performance.The device based on a 0.3-nm-thick yellow EML and Bphen exhibits high color stability with a slight Commission International de l＇Eclairage（CIE） coordinates variation of（0.017,0.009） at a luminance ranging from 52 cd/m^2 to 6998 cd/m^2.The TPBi-based device yields a high efficiency with a maximum external quantum efficiency（EQE）,current efficiency,and power efficiency of 10%,21.1 cd/A,and 21.3 lm/W,respectively.The ultrathin yellow EML suppresses hole trapping and short-radius Dexter energy transfer,so that Forster energy transfer（FRET）from DMAC-DPS to（tbt）_2Ir（acac） is dominant,which is beneficial to keep the color stable.The employment of TPBi with higher triplet excited state effectively alleviates the triplet exciton quenching by ETL to improve device efficiency.

Solvothermal Synthesis of ZnIn2S4 by Alcohol Solvents and Visible Light Photocatalytic Activity on Selective Oxidation and Dye Degradation

A series of hexagonal ZnIn2S4 samples with different morphologies have been successfully prepared via a facile solvothermal approach using different alcohol solvents with the optimum synthesis time and temperature. X-ray diffraction, field emission scanning electron microscopy, UV-vis diffuse reflection spectroscopy and photoelectrochemical measurements are employed to determine the properties of the samples. It is found that the solvent has a significant influence on the morphology, optical properties and electronic nature of the samples. The photocatalytic activities of the samples have been evaluated by selective oxidation of benzyl alcohol to benzaldehyde to benzaldehyde and the degradation of methyl orange（MO） under visible light irradiation. The results reveal that the photocatalytic activities of ZnIn2S4 are closely related to the reaction solvent. The ethanol-mediated ZnIn2S4 exhibits the best photocatalytic performance toward selective oxidation of benzyl alcohol to benzaldehyde and the degradation of dye MO compared to the samples prepared in other solvents, which can be attributed to the integrative effect of the enhanced light absorption intensity and the prolonged lifetime of photogenerated carriers. In addition, a possible mechanism is proposed and discussed. It is expected that our current research could promote further interest on the synthesizing efficient ternary chalcogenides semiconducting materials for environment remediation and organic transformation.

In-Situ Hydrothermal Synthesis of Bi–Bi2O2CO3 Heterojunction Photocatalyst with Enhanced Visible Light Photocatalytic Activity

Bismuth containing nanomaterials recently received increasing attention with respect to environmental applications because of their low cost, high stability and nontoxicity. In this work, Bi–Bi_2O_2CO_3 heterojunctions were fabricated by in-situ decoration of Bi nanoparticles on Bi_2O_2CO_3 nanosheets via a simple hydrothermal synthesis approach. X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM) and high-resolution TEM(HRTEM) were used to confirm the morphology of the nanosheet-like heterostructure of the Bi–Bi_2O_2CO_3 composite. Detailed ultrafast electronic spectroscopy reveals that the in-situ decoration of Bi nanoparticles on Bi_2O_2CO_3 nanosheets exhibit a dramatically enhanced electron-hole pair separation rate, which results in an extraordinarily high photocatalytic activity for the degradation of a model organic dye, methylene blue(MB) under visible light illumination. Cycling experiments revealed a good photochemical stability of the Bi–Bi_2O_2CO_3 heterojunction under repeated irradiation. Photocurrent measurements further indicated that the heterojunction incredibly enhanced the charge generation and suppressed the charge recombination of photogenerated electron-hole pairs.

雷公藤多苷片对IgA肾病大鼠LIGHT-HVEM/LTβR通路的影响

目的 基于炎症相关通路探讨雷公藤多苷片对IgA肾病大鼠肾脏的作用机制。方法 雄性SPF级SD大鼠,随机分为空白组、造模组。造模组采用联合“牛血清白蛋白+四氯化碳+脂多糖”建立IgA肾病大鼠模型。造模成功的大鼠随机分为模型组、泼尼松组、雷公藤多苷片组,于第13周开始治疗组灌胃给药,给药4周后留取大鼠24 h尿液、血液、肾组织并检测尿红细胞数、24 h-UTP、BUN、Scr;ELISA检测血清IL-1β、TNF-α水平;HE染色观察各组大鼠肾组织病理学变化;Western blot及RT-PCR检测大鼠肾组织LIGHT、HVEM、LTβR蛋白及其mRNA的表达。结果 雷公藤多苷片明显降低IgA肾病大鼠尿红细胞数、24 h-UTP、BUN、Scr水平,改善肾组织病理,降低血清炎症因子IL-1β、TNF-α水平,降低肾组织中LIGHT、HVEM、LTβR蛋白及其mRNA表达水平。结论 雷公藤多苷片可能通过下调LIGHT-HVEM/LTβR信号通路,抑制免疫反应,减少炎症因子释放,从而减轻炎症反应,降低尿红细胞及尿蛋白,改善肾脏病理损伤,保护肾功能。

One-pot hydrothermal synthesis of willow branch-shaped MoS_2/CdS heterojunctions for photocatalytic H_2 production under visible light irradiation

Willow branch-shaped MoS2/CdS heterojunctions are successfully synthesized for the first time by a facile one-pot hydrothermal method. The as-prepared samples were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, nitrogen adsorption-desorption measurements, diffuse reflectance spectroscopy, and photoelectrochemical and photoluminescence spectroscopy tests. The photocatalytic hydrogen evolution activities of the samples were evaluated under visible light irradiation. The resulting MoS2/CdS heterojunctions exhibit a much improved photocatalytic hydrogen evolution activity than that obtained with CdS and MoS2. In particular, the optimized MC-5 (5 at.% MoS2/CdS) photocatalyst achieved the highest hydrogen production rate of 250.8 μmol h–1, which is 28 times higher than that of pristine CdS. The apparent quantum efficiency (AQE) at 420 nm was 3.66%. Further detailed characterizations revealed that the enhanced photocatalytic activity of the MoS2/CdS heterojunctions could be attributed to the efficient transfer and separation of photogenerated charge carriers resulting from the core-shell structure and the close contact between MoS2 nanosheets and CdS single-crystal nanorods, as well as to increased visible light absorption. A tentative mechanism for photocatalytic H2 evolution by MoS2/CdS heterojunctions was proposed. This work will open up new opportunities for developing more efficient photocatalysts for water splitting.