OBSERVATION OF THE EFFECT OF S－（－）USNIC ACID SODIUM ON TRICHOMONAS VAGINALIS BY TRANSMISSION ELECTRON MICROSCOPE

This paper reports the ultrastructural changes of trichomonas vaginaiis (T. vag. ) under the action of s-(-)usnic acid sodium in vitro. These changes can be shown by the following results:At first, the degranulation of the rough endoplasmic reticulum (RER) took place, the polyribosomes disaggregated. And then, the Golgi complex and the endoplasmic reticulum dilated. The cytoplasmic matrix presented and inhomogeneous apperance. Finally, the biomembrane loosed and fractured.The cell nuclei presented the karyorrhexis.

Characterization of Li-rich layered oxides by using transmission electron microscope

Lithium-rich layered oxides(LrLOs) deliver extremely high specific capacities and are considered to be promising candidates for electric vehicle and smart grid applications. However, the application of LrLOs needs further understanding of the structural complexity and dynamic evolution of monoclinic and rhombohedral phases, in order to overcome the issues including voltage decay, poor rate capability, initial irreversible capacity loss and etc. The development of aberration correction for the transmission electron microscope and concurrent progress in electron spectroscopy, have fueled rapid progress in the understanding of the mechanism of such issues. New techniques based on the transmission electron microscope are first surveyed, and the applications of these techniques for the study of the structure, migration of transition metal, and the activation of oxygen of LrLOs are then explored in detail, with a particular focus on the mechanism of voltage decay.

Ultrastructural view of colon anastomosis under propolis effect by transmission electron microscopy

AIM： To evaluate the effect of propolis administration on the healing of colon anastomosis with light and transmission electron microscopes. METHODS： Forty-eight Wistar-AIbino female rats were divided into two groups and had colon resection and anastomosis. In group Ⅰ, rats were fed with standard rat chow pre- and postoperatively. The rats in group Ⅱ were fed with standard rat chow and began receiving oral supplementation of propolis 100 mg/kg per day beginning 7 d before the operation and continued until they were sacrificed. Rats were sacrificed 1, 3, 7 and 14 d after operation, and anastomotic bursting pressures measured. After the resection of anastomotic segments, histopathological examination was performed with light and transmission electron microscopes by two blinded histologists and photographed. RESULTS： The colonic bursting pressures of the propolis group were statistically significantly better than the control group. UItrastructural histopathological analysis of the colon anastomosis revealed that propotis accelerated the phases of the healing process and stimulated mature granulation tissue formation and collagen synthesis of fibroblasts. CONCLUSION： Bursting pressure measurements and ultra structural histopathological evaluation showed that administration of propolis accelerated the healing of colon anastomosis following surgical excision.

Specimen preparation of aluminum alloy powders for transmission electron microscopy

By nickel electroplating at room temperature, the specimen preparation of ultra sonic gas atomized aluminum alloy powders for observation in transmission electron microscope was carried out. The advantages of this technique are simple technologically and convenient practically. The nickel and the powders combine well in the plated sheet which can be thinned by ion milling. The powders in the thinned sheet possess large thinned area and can be examined in common TEM for the studies of their microstructure.

Characterization of swift heavy ion tracks in MoS2 by transmission electron microscopy

The various morphologies of tracks in MoS2 irradiated by swift heavy ions at normal and 30° incidence with 9.5–25.0 MeV/u 86Kr, 129Xe, 181Ta, and 209Bi ions were investigated by transmission electron microscopy. The diameter of ion tracks increases from 1.9 nm to 4.5 nm with increasing electronic energy loss. The energy loss threshold of the track formation in MoS2 is predicted as about 9.7 keV/nm based on the thermal spike model and it seems consistent with the experimental results. It is shown that the morphology of ion tracks is related to the penetration length of ions in MoS2. The formation process of ion tracks is discussed based on the cooperative process of outflow and recrystallization of the molten phase during rapid quenching.

Bacteriophage Morphological Characterization by Using Transmission Electron Microscopy

Bacteriophages or more commonly ＂phages＂ are bacterial viruses. They are ubiquitous and good indicators of bacterial contaminations since their prevalence is high in those environments where their hosts are abundant. Phage classification is based on morphology and for this reason, even though it is considered an old technique, TEM （Transmission Electron Microscopy） still plays a key role in their characterization. In the present work, the authors focused on TEM analysis of phage ФApr-1 isolated against Lactococcuslactis （L. lactis）, implicated in industrial fermentations and of phage ФIZSAM-1, active against Listeria monocytogenes （L. monocytogenes）, isolated from the environment. For observation with TEM （EM 900T-Zeiss）, phages were harvested in liquid media and were negative stained with fosfotungstic acid 2‰. An accurate viral ultrastructure analysis by using TEM is fundamental not only in the first approach of characterization of newly isolated phages but also for providing useful information to go further to the selection process as potential bio-decontaminants.

Bacteriological and electron microscopic examination of primary intrahepatic stones

BACKGROUND: Primary intrahepatic cholelithiasis is usually combined with biliary tract infection. This research was undertaken to investigate the relationship between intrahepatic stones and biliary tract infection. METHODS: Thirty-five bile samples and 30 stones specimens were cultured for bacteria and 12 stones specimens were examined with a scan electron microscope (SEM) or a transmission electron microscope (TEM). RESULT: 94.2% bile samples and 96.7% stones specimens were positive in bacteria culture. Bacteria were found in stones under SEM and TEM. CONCLUSION: Bacteria in stones are associated with the infection of the biliary tract.

Nanoelectronic devices resonant tunnelling diodes grown on InP substrates by molecular beam epitaxy with peak to valley current ratio of 17 at room temperature

This paper reports that InAs/In0.53Ga0.47As/AlAs resonant tunnelling diodes have been grown on InP substrates by molecular beam epitaxy. Peak to valley current ratio of these devices is 17 at 300K. A peak current density of 3kA/cm^2 has been obtained for diodes with AlAs barriers of ten monolayers, and an Ino.53Ga0.47As well of eight monolayers with four monolayers of InAs insert layer. The effects of growth interruption for smoothing potential barrier interfaces have been investigated by high resolution transmission electron microscope.

Mssbauer and electron microscopy study of martensitic transformations in an Fe-Mn-Mo alloy

The kinetic,morphological,crystallographic,and magnetic characteristics of thermally induced martensites in Fe-13.4wt% Mn-5.2wt%Mo alloy were investigated by scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,and M（o｜¨）ssbauer spectroscopy.The experimental results reveal that two types of thermal-induced martensites,e（hcp） andα＇（bcc） martensites,are formed in the as-quenched condition,and these transformations have athermal characters.Mo addition to the Fe-Mn alloy does not change the coexistence ofεandα＇ martensites with the Mn content between 10wt%and 15wt%.Besides,M（o｜¨）ssbauer spectra reveal a paramagnetic character with a singlet for theγ（fcc） austenite andεmartensite phases and a ferromagnetic character with a broad sextet for theα＇ martensite phase. The volume fraction ofα＇ martensite forming in the quenched alloy is much more than that of theεmartensite.

Ultrafast electron microscopy in material science

Recent advances in the ultrafast transmission electron microscope （UTEM）, with combined spatial and temporal resolutions, have made it possible to directly visualize the atomic, electronic, and magnetic structural dynamics of materials. In this review, we highlight the recent progress of UTEM techniques and their applications to a variety of material systems. It is emphasized that numerous significant ultrafast dynamic issues in material science can be solved by the integration of the pump-probe approach with the well-developed conventional transmission electron microscopy （TEM） techniques. For instance, UTEM diffraction experiments can be performed to investigate photoinduced atomic-scale dynamics, including the chemical reactions, non-equilibrium phase transition/melting, and lattice phonon coupling. UTEM imaging methods are invaluable for studying, in real space, the elementary processes of structural and morphological changes, as well as magnetic-domain evolution in the Lorentz TEM mode, at a high magnification. UTEM electron energy-loss spectroscopic techniques allow the examination of the ultrafast valence states and electronic structure dynamics, while photoinduced near-field electron microscopy extends the capability of the UTEM to the regime of electromagnetic-field imaging with a high real space resolution.

Nanoparticles Production and Inclusion in <i>S. aureus</i>Incubated with Polyurethane: An Electron Microscopy Analysis

This study shows that submicron/nanoparticles found in bacterial cells (S. aureus) incubated with polyurethane (a material commonly used for prostheses in odontostomatology) are a consequence of biodestruction. The presence of polyurethane nanoparticles into bacterial vesicles suggests that the internalization process occurs through endocytosis. TEM and FIB/SEM are a suitable set of correlated instruments and techniques for this multi facet investigation: polyurethane particles influence the properties of S. aureus from the morpho-functional standpoint that may have undesirable effects on the human body. S. aureus and C. albicans are symbiotic microorganisms;it was observed that C. albicans has a similar interaction with polyurethane and an increment of the biodestruction capacity is expected by its mutual work with S. aureus.

Tracking lithiation with transmission electron microscopy

Li-ion batteries(LIBs)have dominated energy-storage techniques for portable electronic devices and electric cars,and are expanding their territory into the large-scale energy storage.The energy storage of LIBs is realized by the reversible shuttle of lithium ions between electrodes.It is essential to track the lithium diffusion and obtain a profound insight into the lithiation mechanism during the work cycle of LIBs.Transmission electron microscopy(TEM)is a powerful tool for the structural characterization,which can provide the information about the lithiation at the atomic scale.In this review,we summarize the research frontiers of TEM applications on LIBs.We introduce the techniques for the direct observation of Li species in LIB-related materials.Especially,the application of cryo-TEM is highlighted.Moreover,in-situ TEM technique is further discussed since it shows great advantages in studying the dynamical structure changes of LIBs.The perspectives and strategies in this review offer feasible guidance for researchers to further improve the performance of LIBs.

Making the link between ADF and 4D STEM:Resolution,transfer and coherence

Steve Pennycook is a pioneer in the application of high-resolution scanning transmission electron microscopy(STEM)and in particular the use of annular dark-field(ADF)imaging.Here we show how a general framework for 4D STEM allows clear links to be made between ADF imaging and the emerging methods for reconstructing images from 4D STEM data sets.We show that both ADF imaging and ptychographical reconstruction can be thought of in terms of integrating over the overlap regions of diffracted discs in the detector plane.This approach allows the similarities in parts of their transfer functions to be understood,though we note that the transfer functions for ptychographic imaging cannot be used as a measure of information transfer.We also show that conditions of partial spatial and temporal coherence affect ADF imaging and ptychography similarly,showing that achromatic interference can always contribute to the image in both cases,leading to a robustness to partial temporal coherence that has enabled high-resolution imaging.

Manufacturing of SEM and TEM Samples for Oocyte

[ Objective] The research aimed to explore the manufacturing methods of scanning electron microscope （SEM） and transmission electron microscopy （TEM） for oocyte and provide technical support for related research. [ Method] Based on GV-and MII-stage oocytes, samples of SEM and TEM were prepared respectively, then ultrastructure changes were observed. [ Result] The results showed that the method needed few samples, keep intact cell morphology and can see clear ultrastructure. [Conclusion] The method is suitable for ultrastructural observation of oocyte.

Investigation of structural change of purple membrane in storage by transmission electron microscope and atomic force microscope

The structural change of purple membrane during storage has been investigated by means of transmission electron microscope and atomic force microscope. It is found that many liposomes have spontaneously evolved from the purple membrane sheets isolated three years ago. The membrane proteins on the liposomes, bacteriorhodopsin, are still presented as trimers in 2-D hexagonal structure, which is the same as that in natural cell membrane. However, the cytoplasmic surface of purple membrane faced outside on the liposomes.

煤中黄铁矿表面细菌氧化的XRD及SEM/TEM研究

借助于XRD和SEM/TEM等表面分析测试技术,对煤中黄铁矿表面经氧化亚铁硫杆菌作用前后的表面微观结构的变化进行了研究.作为对比,同时采用了氧化剂(H2O2)对黄铁矿表面进行氧化试验.结果表明,氧化亚铁硫杆菌在黄铁矿表面的氧化形式与氧化剂(H2O2)在黄铁矿表面的氧化形式不同.从黄铁矿表面微观结构的变化来看,氧化剂氧化的结果多出现钮扣状的片起,表现为较为剧烈的直接强氧化作用,而氧化亚铁硫杆菌氧化则呈现坑蚀,表现为相对缓和的吸附氧化作用.这为研究细菌对煤中黄铁矿表面的作用机理提供了一定的参考.

Dynamically observing the formation of MOFs-driven Co/N-doped carbon nanocomposites by in-situ transmission electron microscope and their application as high-efficient microwave absorbent

Metal-organic frameworks(MOFs)derived magnetic carbon-based nanocomposites have drawn widespread attentions due to the well distributed nanocrystals in carbon matrix.Dynamically observing the formation process is urgently needed.Herein,taking zeolitic imidazolate framework(ZIF)-67 as an example,the pyrolysis process is investigated by in-situ transmission electron microscopy(TEM)assisted with ex-situ characterizations.Co nanocrystals are evenly distributed in carbon at the initial stage of carbonization.By increasing pyrolysis temperature,the nanocrystals grow bigger and migrate to carbon surface.The carbon texture transfers from amorphous to crystalline at 600°C,and thoroughly converts at 800°C.In-situ heating TEM shows that more tiny Co nanocrystals move out from the carbon texture by increasing temperature from 700 to 800°C.At 1,000°C,some escaped tiny Co nanocrystals are volatilized and disappeared.The residual escaped Co nanocrystals catalyze the formation of carbon nanotubes(CNTs).Due to the synergistic effect between Co and carbon as well as porous structure,the nanocomposites show high-efficient microwave absorption performance,which can be tuned by pyrolysis temperature,heating rate,and mass fraction.When the mass fraction is 30 wt.%,the nanocomposites obtained at 600 or 700°C display remarkable microwave absorption with optimal reflection loss(RL)smaller than−70 dB and effective absorption band larger than 4.9 GHz.Combining the in-situ and ex-situ techniques,some key findings were observed:(1)graphitization of carbon;(2)volatilization of Co nanocrystals;(3)formation process of CNTs by Co catalyst.These findings are helpful to understand the formation of MOFs derived carbon-based composites and expand their practical applications,especially for microwave absorption.

以硫化态前驱物制备的NiMoS/γ-Al_2O_3催化剂表面活性相HRTEM研究

采用硫化态前驱物四硫代钼酸铵溶液浸渍载体γ-Al2O3制备了硫化态NiMoS/γ-Al2O3加氢精制催化剂,对催化剂进行了XRD和HRTEM表征,并以FCC柴油为原料,考察了催化剂的加氢精制性能。结果表明,该加氢催化剂的活性组分与载体γ-Al2O3的相互作用较弱,不存在难以还原硫化的Mo—O—Al桥键,催化剂表面MoS2分散度较好,MoS2的晶粒较大,堆积层数较高,大部分MoS2以Ⅱ型的NiMoS相存在;硫化态NiMoS/γ-Al2O3加氢精制催化剂具有优于工业催化剂CK-2的脱硫、脱氮和脱芳烃性能。

酸蚀剂浓度对牙本质粘接界面影响的SEM和TEM研究

目的 :研究不同浓度的酸蚀剂对牙本质湿粘接界面的影响。方法 :选用 10 %、32 %和 37% 3种浓度的磷酸酸蚀剂处理牙本质粘结面 ,然后用四种牙本质湿粘接剂将复合树脂粘结在处理后的牙本质粘结面 ,在扫描电镜(SEM)和透射电镜 (TEM )下观察粘接界面的微观形态。结果 :用不同浓度的酸蚀剂处理牙本质粘结表面时 ,4种粘接系统OptiBondSolo、SingleBond、GlumaOne-Bond和One-Step均可以观察到较为理想的渗透图像 ,同一粘接剂、不同浓度酸蚀剂处理后的界面超微结构之间没有明显区别。结论 :10 %、32 %和 37% 3种浓度的磷酸酸蚀剂处理牙本质后 。

大气降尘TEM观察及其环境矿物学意义

在X射线衍射等分析研究基础上 ,进一步用透射电镜对半封闭室内长期沉积的大气降尘进行观察 ,提供了合肥地区大气降尘物相组成和各种物相形貌特征信息 ,揭示合肥地区大气污染物来源占第 1位的是地表扬尘 ,以粘土矿物为标志 ;占第 2位的是来源于大气化学次生气溶胶 ,主要和SO2 、CO2 、NOX 等气态污染物排放有关 ,以石膏、碳酸盐和易溶盐类为标志 ;占第 3位的是来源于汽车尾气排放的烟尘 ,以炭球为标志 ;占第 4位的是来源于燃煤烟尘排放 ,以球形玻璃珠为特征。TEM调查不仅为合肥地区大气气溶胶颗粒成因、城市大气污染物来源和污染控制对策提供准确资料和依据 。