Influence of blasting load directions on tunnel stability in fractured rock mass

Tunnels in fractured rock masses are typically damaged by dynamic disturbances from various directions.To investigate the influence of blasting load directions on the stability of a tunnel with a precrack nearby,blasting tests were conducted on the physical models of an external crack around a tunnel(ECT)in this study.Failure modes of the tunnels were analysed based on stress wave theory.The Riedel-Hiermaier-Thoma(RHT)material model was employed to perform the numerical simulations on ECT models.Stress distribution around the tunnels and final failure patterns of the tunnels were characterised.The results show that,under blasting loads,the pre-crack propagates and then new cracks initiates on the incident side of the tunnel.These cracks extend towards each other and eventually coalesce.Blasting load directions significantly influence the ultimate failure mode of the tunnel in the fractured rock masses.The new cracks on the shadow side of the tunnel appear at different positions when the blasting stress waves come from various directions.The results are meaningful to the analysis of tunnel stability and optimisation of the tunnel support scheme.

Sensitivity analyses of random cave groups on karst tunnel stability based on water–rock interaction using a novel contact dynamic method

This paper concentrates on the sensitivity and dynamic simulation of randomly distributed karst cave groups on tunnel stability and connectivity extended ratio based on water–rock interaction using a novel contact dynamic method(CDM).The concept of karst cave group connectivity extended ratio during tunneling and water inrush is proposed.The effects of cave shape and spatial distribution on Qiyueshan tunnel are investigated.Tunnel deformation and damage index,and connectivity extended ratio with uniform random karst cave groups are evaluated.The results demonstrate that the connectivity extended ratio is verified as a crucial judgment in predicting the safe distance and assessing the stability of the tunnel with the karst cave group.CDM model captures the fracture propagation and contact behavior of rock mass,surface flow,as well as the bidirectional water–rock interaction during the water inrush of Qiyueshan tunnel with multiple caves.A larger cave radius and smaller minimum distance between the cave and tunnel increase the deformation and damage index of the surrounding rock.When the cave radius and cave area ratio increase,the failure pattern shifts from overall to local failure.These findings potentially have broad applications in various surface and subsurface scenarios involving water–rock interactions.

Probabilistic analysis of tunnel face seismic stability in layered rock masses using Polynomial Chaos Kriging metamodel

Face stability is an essential issue in tunnel design and construction.Layered rock masses are typical and ubiquitous;uncertainties in rock properties always exist.In view of this,a comprehensive method,which combines the Upper bound Limit analysis of Tunnel face stability,the Polynomial Chaos Kriging,the Monte-Carlo Simulation and Analysis of Covariance method(ULT-PCK-MA),is proposed to investigate the seismic stability of tunnel faces.A two-dimensional analytical model of ULT is developed to evaluate the virtual support force based on the upper bound limit analysis.An efficient probabilistic analysis method PCK-MA based on the adaptive Polynomial Chaos Kriging metamodel is then implemented to investigate the parameter uncertainty effects.Ten input parameters,including geological strength indices,uniaxial compressive strengths and constants for three rock formations,and the horizontal seismic coefficients,are treated as random variables.The effects of these parameter uncertainties on the failure probability and sensitivity indices are discussed.In addition,the effects of weak layer position,the middle layer thickness and quality,the tunnel diameter,the parameters correlation,and the seismic loadings are investigated,respectively.The results show that the layer distributions significantly influence the tunnel face probabilistic stability,particularly when the weak rock is present in the bottom layer.The efficiency of the proposed ULT-PCK-MA is validated,which is expected to facilitate the engineering design and construction.

Inverse reliability analysis and design for tunnel face stability considering soil spatial variability

The traditional deterministic analysis for tunnel face stability neglects the uncertainties of geotechnical parameters,while the simplified reliability analysis which models the potential uncertainties by means of random variables usually fails to account for soil spatial variability.To overcome these limitations,this study proposes an efficient framework for conducting reliability analysis and reliability-based design(RBD)of tunnel face stability in spatially variable soil strata.The three-dimensional(3D)rotational failure mechanism of the tunnel face is extended to account for the soil spatial variability,and a probabilistic framework is established by coupling the extended mechanism with the improved Hasofer-Lind-Rackwits-Fiessler recursive algorithm(iHLRF)as well as its inverse analysis formulation.The proposed framework allows for rapid and precise reliability analysis and RBD of tunnel face stability.To demonstrate the feasibility and efficacy of the proposed framework,an illustrative case of tunnelling in frictional soils is presented,where the soil's cohesion and friction angle are modelled as two anisotropic cross-correlated lognormal random fields.The results show that the proposed method can accurately estimate the failure probability(or reliability index)regarding the tunnel face stability and can efficiently determine the required supporting pressure for a target reliability index with soil spatial variability being taken into account.Furthermore,this study reveals the impact of various factors on the support pressure,including coefficient of variation,cross-correlation between cohesion and friction angle,as well as autocorrelation distance of spatially variable soil strata.The results also demonstrate the feasibility of using the forward and/or inverse first-order reliability method(FORM)in high-dimensional stochastic problems.It is hoped that this study may provide a practical and reliable framework for determining the stability of tunnels in complex soil strata.

Investigation of stability of a tunnel in a deep coal mine in China

Stability level of tunnels that exist in an underground mine has a great influence on the safety,production and economic performance of mines.Ensuring of stability for soft-rock tunnels is an important task for deep coal mines located in high in situ stress conditions.Using the available information on stratigraphy,geological structures,in situ stress measurements and geo-mechanical properties of intact rock and discontinuity interfaces,a three-dimensional numerical model was built by using 3DEC software to simulate the stress conditions around a tunnel located under high in situ stress conditions in a coal rock mass in China.Analyses were conducted for several tunnel shapes and rock support patterns.Results obtained for the distribution of failure zones,and stress and displacement felds around the tunnel were compared to select the best tunnel shape and support pattern to achieve the optimum stability conditions.

Stability evaluation method of large cross-section tunnel considering modification of thickness-span ratio in mechanized operation

Purpose-This study aims to research the large cross-section tunnel stability evaluation method corrected after considering the thickness-span ratio.Design/methodology/approach-First,taking the Liuyuan Tunnel of Huanggang-Huangmei High-Speed Railway as an example and taking deflection of the third principal stress of the surrounding rock at a vault after tunnel excavation as the criterion,the critical buried depth of the large section tunnel was determined.Then,the strength reduction method was employed to calculate the tunnel safety factor under different rock classes and thickness-span ratios,and mathematical statistics was conducted to identify the relationships of the tunnel safety factor with the thickness-span ratio and the basic quality(BQ)index of the rock for different rock classes.Finally,the influences of thickness-span ratio,groundwater,initial stress of rock and structural attitude factors were considered to obtain the corrected BQ,based on which the stability of a large cross-section tunnel with a depth of more than 100 m during mechanized operation was analyzed.This evaluation method was then applied to Liuyuan Tunnel and Cimushan No.2 Tunnel of Chongqing Urban Expressway for verification.Findings-This study shows that under different rock classes,the tunnel safety factor is a strict power function of the thickness-span ratio,while a linear function of the BQ to some extent.It is more suitable to use the corrected BQ as a quantitative index to evaluate tunnel stability according to the actual conditions of the site.Originality/value-The existing industry standards do not consider the influence of buried depth and span in the evaluation of tunnel stability.The stability evaluation method of large section tunnel considering the correction of overburden span ratio proposed in this paper achieves higher accuracy for the stability evaluation of surrounding rock in a full or large-section mechanized excavation of double line high-speed railway tunnels.

Analysis of tunnel face stability with advanced pipes support

To keep the tunnel face stable is very important for tunnel construction.In this paper,the tunnel face stability under the advanced pipe was analyzed using the Winkler foundation model and rigid limit equilibrium.The tunnel face deformation characteristics were also analyzed using the numerical simulation.The influence of parameters on the deflection of the pipe roof and the stability of the tunnel face were discussed.The results show that the tunnel face stability can be improved through increasing the pipe diameter,decreasing the initial displacement at the beginning of the pipe seat,and adopting the short round length and small excavation height.With the increase of tunnel burial depth,the safety factor of tunnel face stability first decreases,then increases,and then remains unchanged.The deformation at the center of the tunnel face is larger than the deformation at the surround sides and at the corner.The horizontal displacement varies little with the increasing of the pipe length.The horizontal displacement at the center of the tunnel face increases with the increase of the pipe ring spacing and the pipe longitudinal spacing.There is an optimum external angle.

An efficient probabilistic design approach for tunnel face stability by inverse reliability analysis

In order to maintain the safety of underground constructions that significantly involve geo-material uncertainties,this paper delivers a new computation framework for conducting reliability-based design(RBD)of shallow tunnel face stability,utilizing a simplified inverse first-order reliability method(FORM).The limit state functions defining tunnel face stability are established for both collapse and blow-out modes of the tunnel face failure,respectively,and the deterministic results of the tunnel face support pressure are obtained through three-dimensional finite element limit analysis(FELA).Because the inverse reliability method can directly capture the design support pressure according to prescribed target reliability index,the computational cost for probabilistic design of tunnel face stability is greatly reduced.By comparison with Monte Carlo simulation results,the accuracy and feasibility of the proposed method are verified.Further,this study presents a series of reliability-based design charts for vividly understanding the limit support pressure on tunnel face in both cohesionless(sandy)soil and cohesive soil stratums,and their optimal support pressure ranges are highlighted.The results show that in the case of sandy soil stratum,the blowout failure of tunnel face is extremely unlikely,whereas the collapse is the only possible failure mode.The parametric study of various geotechnical uncertainties also reveals that ignoring the potential correlation between soil shear strength parameters will lead to over-designed support pressure,and the coefficient of variation of internal friction angle has a greater influence on the tunnel face failure probability than that of the cohesion.

Face stability of shield tunnels considering a kinematically admissible velocity field of soil arching

Existing mechanism of simulating soil movement at tunnel face is generally based on the translational or rotational velocity field,which is,to some extent,different from the real soil movement in the arching zone.Numerical simulations are carried out first to investigate the characteristics of the velocity distribution at tunnel face and above tunnel vault.Then a new kinematically admissible velocity field is proposed to improve the description of the soil movement according to the results of the numerical simulation.Based on the proposed velocity field,an improved failure mechanism is constructed adopting the spatial discretization technique,which takes into account soil arching effect and plastic deformation within soil mass.Finally,the critical face pressure and the proposed mechanism are compared with the results of the numerical simulation,existing analytical studies and experimental tests to verify the accuracy and improvement of the presented method.The proposed mechanism can serve as an alternative approach for the face stability analysis.

Analysis of mechanical behavior of soft rocks and stability control in deep tunnels

Due to the weakness in mechanical properties of chlorite schist and the high in situ stress in Jinping II hydropower station, the rock mass surrounding the diversion tunnels located in chlorite schist was observed with extremely large deformations. This may significantly increase the risk of tunnel instability during excavation. In order to assess the stability of the diversion tunnels laboratory tests were carried out in association with the petrophysical properties, mechanical behaviors and waterlweakening properties of chlorite schist. The continuous deformation of surrounding rock mass, the destruction of the support structure and a large-scale collapse induced by the weak chlorite schist and high in situ stress were analyzed. The distributions of compressive deformation in the excavation zone with large deformations were also studied. In this regard, two reinforcement schemes for the excavation of diversion tunnel bottom section were proposed accordingly. This study could offer theoretical basis for deed tunnel construction in similar geological condition~

Research on the stability analysis and design of soil tunnel surrounding rock

The paper first analyzes the failure mechanism and mode of tunnel according to model experiments and mechanical calculation and then discusses the deficiency of taking the limit value of displacement around the tunnel and the size of the plastic zone of surrounding rock as the criterion of stability. So the writers put forward the idea that the safety factor of surrounding rock calculated through strength reduction FEM(finit element method) should be regarded as the criterion of stability,which has strict mechanical basis and unified standard and would not be influenced by other factors. The paper also studies the safety factors of tunnel surrounding rock (safety factors of shear and tension failure) and lining and some methods of designing and calculating tunnels. At last,the writers take the loess tunnel for instance and show the design and calculation results of two-lane railway tunnel.

Energy analysis of stability of twin shallow tunnels based on nonlinear failure criterion

Based on nonlinear Mohr-Coulomb failure criterion, the analytical solutions of stability number and supporting force on twin shallow tunnels were derived using upper bound theorem of limit analysis. The optimized solutions were obtained by the technique of sequential quadratic programming. When nonlinear coefficient equals 1 and internal friction angle equals 0, the nonlinear Mohr-Coulomb failure criterion degenerates into linear failure criterion. The calculated results of stability number in this work were compared with previous results, and the agreement verifies the effectiveness of the present method. Under the condition of nonlinear Mohr-Coulomb failure criterion, the results show that the supporting force on twin shallow tunnels obviously increases when the nonlinear coefficient, burial depth, ground load or pore water pressure coefficients increase. When the clear distance is 0.5to 1.0 times the diameter of tunnel, the supporting force of twin shallow tunnels reaches its maximum value, which means that the tunnels are the easiest to collapse. While the clear distance increases to 3.5 times the diameter of tunnel, the calculation for twin shallow tunnels can be carried out by the method for independent single shallow tunnel. Therefore, 3.5 times the diameter of tunnel serves as a critical value to determine whether twin shallow tunnels influence each other. In designing twin shallow tunnels,appropriate clear distance value must be selected according to its change rules and actual topographic conditions, meanwhile, the influences of nonlinear failure criterion of soil materials and pore water must be completely considered. During the excavation process, supporting system should be intensified at the positions of larger burial depth or ground load to avoid collapses.

Simplified Full Dynamic Analysis of a Railway Tunnel in Ethiopia

This paper presents an effective means of analyzing the safety of a tunnel under dynamic loading in areas with seismic records. A particular case of the railway tunnel in the earthquake-prone regions of the escarpment seismic zone of Ethiopia was the specific focus area of the research. Probabilistic seismic hazard analysis (PSHA) and deaggregation have been conducted to determine the design earthquake required as an input for the dynamic analysis. The PSHA performed by considering the operating design earthquake with conservative assumptions of the local geological features resulted in a peak ground acceleration of 0.36. Two pairs of design earthquake have been obtained from the deaggregation process, which were used to filter acceleration time histories for the selected design earthquake from the ground motion database of Pacific Earthquake Engineering Research Center. Finally, full dynamic analyses of the tunnel have been performed by applying the scaled acceleration time histories corresponding to the structure in the specific site. It was demonstrated how to prove the stability of the tunnel located in difficult ground conditions by performing plane strain analyses with the possible minimum computational efforts.

Geotechnical investigations and remediation design for failure of tunnel portal section： a case study in northern Turkey

Mass movements are very common problems in the eastern Black Sea region of Turkey due to its climate conditions, geological, and geomorphological characteristics. High slope angle, weathering, dense rainfalls, and anthropogenic impacts are generally reported as the most important triggering factors in the region. Following the portal slope excavations in the entrance section of Cankurtaran tunnel, located in the region, where the highly weathered andesitic tuff crops out, a circular toe failure occurred. The main target of the present study is to investigate the causes and occurrence mechanism of this failure and to determine the feasible remedial measures against it using finite element method(FEM) in four stages. These stages are slope stability analyses for pre-and postexcavation cases, and remediation design assessments for slope and tunnel. The results of the FEM-SSR analyses indicated that the insufficient initial support design and weathering of the andesitic tuffs are the main factors that caused the portal failure. After installing a rock retaining wall with jet grout columns and reinforced slope benching applications, the factor of safety increased from 0.83 to 2.80. In addition toslope stability evaluation, the Rock Mass Rating(RMR), Rock Mass Quality(Q) and New Austrian Tunneling Method(NATM) systems were also utilized as empirical methods to characterize the tunnel ground and to determine the tunnel support design. The performance of the suggested empirical support design, induced stress distributions and deformations were analyzed by means of numerical modelling. Finally, it was concluded that the recommended stabilization technique was essential for the dynamic long-term stability and prevents the effects of failure. Additionally, the FEM method gives useful and reasonably reliable results in evaluating the stability of cut slopes and tunnels excavated both in continuous and discontinuous rock masses.

Three-dimensional seismic face stability of shield tunnels inundrained clay

Tunnel face stability has received increasing research interest over the past few decades. However, computing time-efficient and safethree-dimensional solutions under seismic loading is still an unsolved problem, while case studies indicate that seismic loading can be onecritical destabilizing factor affecting tunnel stability. The primary objective of this work is to fill this gap in knowledge by providing compromisingand computationally efficient solutions, along with their respective lower and upper bounds, to compute face stability underseismic conditions. The analyses employ the finite element limit analysis method to evaluate the limit support pressure in undrained clay,considering horizontal pseudo-static seismic forces pointing outwards from the face. Moreover, the analyses employ both constant andlinearly increasing shear strengths with depth. The results are summarized as dimensionless stability charts and tables to facilitate theirinterpretation and future use for tunnel design. A new design equation has been developed to evaluate the stability of the tunnel faceconsidering the effect of seismic forces. Additionally, the effects of different parameters on the shape of the failure mechanism have beeninvestigated by analysing the distribution of shear dissipation.

Effect of cutterhead configuration on tunnel face stability during shield machine maintenance outages

Owing to long-distance advancement or obstacles,shield tunneling machines are typically shut down for maintenance.Engineering safety during maintenance outages is determined by the stability of the tunnel face.Pressure maintenance openings are typically used under complicated hydrogeological conditions.The tunnel face is supported by a medium at the bottom of the excavation chamber and compressed air at the top.Owing to the high risk of face failure,the necessity of support pressure when cutterhead support is implemented and a method for determining the value of compressed air pressure using different support ratios must to be determined.In this study,a non-fully chamber supported rotational failure model considering cutterhead support is developed based on the upper-bound theorem of limit analysis.Numerical simulation is conducted to verify the accuracy of the proposed model.The results indicate that appropriately increasing the specific gravity of the supporting medium can reduce the risk of collapse.The required compressed air pressure increases significantly as the support ratio decreases.Disregarding the supporting effect of the cutterhead will result in a tunnel face with underestimated stability.To satisfy the requirement of chamber openings at atmospheric pressure,the stratum reinforcement strength and range at the shield end are provided based on different cutterhead aperture ratios.

Seismic stability of loess tunnels under the effects of rain seepage and a train load

Loess tunnels are widely used in transportation engineering and are irreplaceable parts of transportation infrastructure. In this paper, a dynamic finite element method is used to analyze the coupled effects of a train vibration load and rainfall seepage. By calculating the variation in the safety factor of a loess tunnel because of the effects of various factors, such as different rainfall intensities and soil thicknesses, the dynamic stability of the loess tunnel is studied under the condition of a near-field pulse-like earthquake. The results show that the security and stability of the tunnel decrease gradually with decreasing burial depth. In addition, the plastic strain of the tunnel is mainly distributed on both sides of the vault and the feet, and the maximum value of the critical strain occurs on both sides of the arch feet. Because of the effects of the train vibration load and rainfall seepage, the safety factor of the loess tunnel structure decreases to a certain degree. Moreover, the range and maximum value of the plastic strain increase to various degrees.

Face stability analysis of a shield tunnel excavated along inclined strata

The horizontally layered or even inclined strata are often encountered in practical shield tunneling.The influence of inclined strata on face stability of shield tunnels is not fully investigated by the existing studies.This paper adopts both theoretical analysis and numerical simulation to carry out research on face stability in inclined strata.The spatial discretization technique is adopted to construct a threedimensional(3D)kinematic failure mechanism considering intersection between inclined soil interface and tunnel face.An analytical solution for critical support pressure is obtained.Besides,the critical support pressure and 3D kinematic mechanism are compared with numerical results to verify accuracy and effectiveness of analytical model.The influences of dip and position of inclined strata on face stability are thoroughly studied.The proposed failure mechanism can serve as a reference for face stability analysis in inclined strata.

Investigation of the failure mechanism and theoretical model of bolt-reinforced shallow tunnel faces with different bolt lengths

Using fiberglass bolts to reinforce a tunnel face is a practical auxiliary technology for ensuring tunnel face stability in soft ground.The reinforcing effect and the economics of this technology are significantly affected by bolt length.However,to date,the failure mechanism of bolt-reinforced tunnel faces with different bolt lengths has rarely been investigated.To reveal the failure mechanism of bolt-reinforced shallow tunnel faces,in this study,the stability of bolt-reinforced tunnel faces with different bolt lengths was investigated by using laboratory tests and numerical simulations,and a simplified theoretical model for practical engineering was proposed.The face support pressure and failure pattern for different bolt lengths during the face collapse process were obtained,and the influence of bolt length on face stability was clearly revealed.More specifically,the results show that face stability increases with increasing bolt length,and the reinforcing effect of face bolts is governed by the shear failure at the soil-grout interface first in the stable zone of the tunnel face and then in the failure zone.Once the bolt length in the stable zone is larger than that in the failure zone,face stability will not be improved with increasing bolt length;thus,this bolt length is referred to as the optimal bolt length L_(opt).The L_(opt)value is slightly larger than the initial failure range(in the unreinforced condition)and can be approximately calculated by L_(opt)=(1-0.0133u)D(u is the friction angle of the soil,and D is the tunnel diameter)in practical engineering.Finally,a simplified theoretical model was established to analyse the stability of reinforced tunnel faces,and the results are in good agreement with both laboratory tests and numerical simulations.The proposed model can be used as an efficient tool for the design of face bolts.

Experimental study of face passive failure features of a shallow shield tunnel in coastal backfill sand

Face passive failure can severely damage existing structures and underground utilities during shallow shield tunneling,especially in coastal backfill sand.In this work,a series of laboratory model tests were developed and conducted to investigate such failure,for tunnels located at burial depth ratios for which C/D=0.5,0.8,1,and 1.3.Support pressures,the evolution of failure processes,the failure modes,and the distribution of velocity fields were examined through model tests and numerical analyses.The support pressure in the tests first rose rapidly to the elastic limit and then gradually increased to the maximum value in all cases.The maximum support pressure decreased slightly in cases where C/D=0.8,1,and 1.3,but the rebound was insignificant where C/D=0.5.In addition,the configuration of the failure mode with C/D=0.5 showed a wedge-shaped arch,which was determined by the outcropping shear failure.The configuration of failure modes was composed of an arch and the inverted trapezoid when C/D=0.8,1,and 1.3,in which the mode was divided into lower and upper failure zones.