Weathering and accumulation of trace elements in the soils of the Porali Plain, Balochistan: repercussions in agriculture

This study is thefirst attempt to assess the nature of the soil,especially on the western side of the Porali Plain in Balochistan;a new emerging agriculture hub,using weathering and pollution indices supplemented by multi-variate analysis based on geochemical data.The outcomes of this study are expected to help farmers in soil manage-ment and selecting suitable crops for the region.Twenty-five soil samples were collected,mainly from the arable land of the Porali Plain.After drying and coning-quarter-ing,soil samples were analyzed for major and trace ele-ments using the XRF technique;sieving and hydrometric methods were employed for granulometric analysis.Esti-mated data were analyzed using Excel,SPSS,and Surfer software to calculate various indices,correlation matrix,and spatial distribution.The granulometric analysis showed that 76%of the samples belonged to loam types of soil,12%to sand type,and 8%to silt type.Weathering indices:CIA,CIW,PIA,PWI,WIP,CIX,and ICV were calculated to infer the level of alteration.These indices reflect mod-erate to intense weathering;supported by K_(2)O/AI_(2)O_(3),Rb/K_(2)O,Rb/Ti,and Rb/Sr ratios.Assessment of the geo-ac-cumulation and Nemerow Pollution indices pinpoint rela-tively high concentrations of Pb,Ni,and Cr concentration in the soils.The correlation matrix and Principal Compo-nent Analysis show that the soil in this study area is mainly derived from the weathering of igneous rocks of Bela Ophiolite(Cretaceous age)and Jurassic sedimentary rocks of Mor Range having SEDEX/MVT type mineralization.Weathering may result in the undesirable accumulation of certain trace elements which adversely affects crops.

Textile Environmental Conditioning: Effect of Relative Humidity Variation on the Tensile Properties of Different Fabrics

With the aim that to confirm the need for humidity control in the environment in which textile sample are visually and instrumentally analyzed, three different pre-conditioned fabrics sample of cotton, polyester and silk were treated at a fix temperature of 21?C. The relative humidity adjusted to four levels: 55%, 65%, 75% and 85% RH for a conditioning time of 24 hours as specified in ASTM D-1776-98. It has been observed that as the relative humidity increase from 55% to 85% cotton increase its tensile strength, silk losses its strength and there was no significant change observed in the tensile strength of polyester fabric.

Cure Characteristics, Mechanical and Swelling Properties of Marble Sludge Filled EPDM Modified Chloroprene Rubber Blends

In the present study, attempts have been made to modify Marble Sludge (MS) filled Ethylene-propylene-diene monomer (EPDM) with Chloroprene rubber (CR). Compounding was carried out on a two-roll mill and vulcanized at 155℃. The modified blend of MS filed EPDM/CR was characterized on the basis of the effect of blend ratio on cure characteristics, mechanical and swelling properties of blends were investigated. The effect of thermal aging on mechanical and swelling behavior in aromatic, aliphatic and chlorinated solvents of cured MS filled EPDM/CR blend was also examined. The minimum torque and maximum torque of the blend first increased and then slightly decreased after the increasing of CR content in MS filled EPDM/CR blends. Scorch time, cure time, cure rate index, tensile strength, tear strength, hardness increased with increasing CR content in the MS filled EPDM compound, but elongation at break, resilience, abrasion loss, mole % uptake, swelling index and percentage of soluble fraction decreased, resilience, abrasion loss, mole % uptake, swelling index and percentage of soluble fraction decreases. Accelerated aging performance of cured composites also influenced by increasing CR content in MS filled EPDM compound.

Comparison between Pigment Printing Systems with Acrylate and Butadiene Based Binders

Pigment printing was carried out on lab scale by simple screen-printing techniques. By the application of acrylate and butadiene based binder, the crocking fastness, formaldehyde release and PVC migration of fabric printed with Imparon red KB pigment was evaluated. The effect of curing time on K/S values was also investigated. It has been found that butadiene based binder shows good performance in terms of crocking fastness, formaldehyde release and PVC migra-tion. It has also been observed that by increasing the binder concentration, the release of formaldehyde decreased and by increasing the curing time, the K/S values of printed fabric were decreased.