Clay materials from Thicky in Thiès district (Senegal) are very abundant and could be used for the production of clay brick for the construction industry in Senegal and the surrounding countries. The geophysical,...Clay materials from Thicky in Thiès district (Senegal) are very abundant and could be used for the production of clay brick for the construction industry in Senegal and the surrounding countries. The geophysical, geotechnical, and thermal studies carried out did lead to a better comprehension of the potential of the area for clay production. It also allowed determining the physical and chemical characteristics of the clays for their use in order to make fired clay bricks. Different types of fired clay brick were produced with Thicky’s clays. The study of the physical, mechanical and thermal parameters of these raw materials and bricks has given very satisfactory results compared to the standards in use. It is noted a good ceramic behavior, and there is no deterioration observed after firing at 900°C until low residual moisture of about 3% (on a dry basis), a smooth texture with a beautiful appearance, a low loss on ignition, a low shrinkage value of less than 1% (dry), moderate water absorption and also good compressive strength. The study of thermal properties on a brick wall by the asymmetric lime plane method gives satisfactory effusivity and thermal conductivity values which are respectively equal to 746.48 J<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>K<sup>-1</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>m<sup>-2</sup><span style="white-space:nowrap;">·</span>s<sup>-1/2</sup> and 0.42 W<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>m<sup>-1</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>k<sup>-1</sup> with a thermal resistance of 0.0028 m<sup>2</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>K<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>W<sup>-1</sup>.展开更多
The use of low thermal conductivity materials plays an important role in the construction of energy-efficient buildings. Indeed, the improvement of the thermal properties of building walls reduces energy consumption. ...The use of low thermal conductivity materials plays an important role in the construction of energy-efficient buildings. Indeed, the improvement of the thermal properties of building walls reduces energy consumption. This study aims to determine the thermal and energy balances of a building enveloped with Typha australis on the one hand, and a building without Typha on the other hand (a building constructed with conventional materials) using the commercial software Visual TTH. The results of the heat loss calculations show that the Typha building is 62% more efficient than the conventional building. Also, the studies on air-conditioning needs resulted in energy savings of 1577.136 kWh per year for the Typha building, i.e. 1219 kg per year of CO<sub>2</sub> avoided in the air according to the SENELEC emission factor 0.773/MWh in Senegal.展开更多
The present work evaluated the properties of modified concrete using polyethylene terephthalate (PET) bottle waste as a partial replacement for coarse aggregate. Modified concrete samples were designed using a water/c...The present work evaluated the properties of modified concrete using polyethylene terephthalate (PET) bottle waste as a partial replacement for coarse aggregate. Modified concrete samples were designed using a water/cement (W/C) ratio of 0.50 and varying percentages of PET replacement (3%, 7%, 10%, and 15% by volume). Dreux Gorisse’s formulation approach was used to make the final products, and the mechanical properties of the samples were determined using Controlab presses. This modified concrete with PET chips has shown that with a 10% replacement of PET chips, the fresh density decreases by 3.56%, and the hardened state density decreases by 2.01%. The water absorption and thermal conductivity of the formulated concretes decreased. However, the results showed that the slump of these fresh concretes increased as the percentage of plastic aggregate replacement increased. Based on the results, incorporating PET aggregates into concrete contributes to good workability, and lightweight concrete structures, and provides some thermal comfort in concrete structures.展开更多
The present work investigated the effect of polyethylene terephthalate (PET) plastic waste on the physico-mechanical and thermal properties of cement-stabilized laterite bricks to see the durability of the modified br...The present work investigated the effect of polyethylene terephthalate (PET) plastic waste on the physico-mechanical and thermal properties of cement-stabilized laterite bricks to see the durability of the modified bricks (CSLB). Samples were formulated by mixing laterite, cement, and different percentages of PET (0%, 3%, 5%, and 7%) by volume. The bricks were produced using the M7MI Hydraform standard interlocking block and kept in the shade for a curing period of 28 days. The addition of 3% to 5% PET to the laterite stabilized with 10% cement results in a decrease in both dry and wet compressive strength, which is determined using the Controlab compression machine. However, the obtained results are in concordance with the standards. The thermal conductivity of CSLB, determined using the box method with the EI700 measurement cell, decreases as the PET content of the mixture increases. A decrease in bulk density from 1.67 to 1.58 g/cm<sup>3</sup> was observed.展开更多
Wine & Gourmet Asia 2007(亚洲美食佳酿展暨酒店及餐饮设备展)日前假澳门威尼斯人度假村酒店的会议及展览中心隆重举行。这是一个崭新的贸易、业界交流与厨艺示范平台,举世绝伦地展示了亚太区高级美酒、精致佳肴及酒店服务业的精粹...Wine & Gourmet Asia 2007(亚洲美食佳酿展暨酒店及餐饮设备展)日前假澳门威尼斯人度假村酒店的会议及展览中心隆重举行。这是一个崭新的贸易、业界交流与厨艺示范平台,举世绝伦地展示了亚太区高级美酒、精致佳肴及酒店服务业的精粹,是澳门有史以来最大型的餐饮贸易展。展开更多
文摘Clay materials from Thicky in Thiès district (Senegal) are very abundant and could be used for the production of clay brick for the construction industry in Senegal and the surrounding countries. The geophysical, geotechnical, and thermal studies carried out did lead to a better comprehension of the potential of the area for clay production. It also allowed determining the physical and chemical characteristics of the clays for their use in order to make fired clay bricks. Different types of fired clay brick were produced with Thicky’s clays. The study of the physical, mechanical and thermal parameters of these raw materials and bricks has given very satisfactory results compared to the standards in use. It is noted a good ceramic behavior, and there is no deterioration observed after firing at 900°C until low residual moisture of about 3% (on a dry basis), a smooth texture with a beautiful appearance, a low loss on ignition, a low shrinkage value of less than 1% (dry), moderate water absorption and also good compressive strength. The study of thermal properties on a brick wall by the asymmetric lime plane method gives satisfactory effusivity and thermal conductivity values which are respectively equal to 746.48 J<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>K<sup>-1</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>m<sup>-2</sup><span style="white-space:nowrap;">·</span>s<sup>-1/2</sup> and 0.42 W<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>m<sup>-1</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>k<sup>-1</sup> with a thermal resistance of 0.0028 m<sup>2</sup><span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>K<span style="white-space:nowrap;"><span style="white-space:nowrap;">·</span></span>W<sup>-1</sup>.
文摘The use of low thermal conductivity materials plays an important role in the construction of energy-efficient buildings. Indeed, the improvement of the thermal properties of building walls reduces energy consumption. This study aims to determine the thermal and energy balances of a building enveloped with Typha australis on the one hand, and a building without Typha on the other hand (a building constructed with conventional materials) using the commercial software Visual TTH. The results of the heat loss calculations show that the Typha building is 62% more efficient than the conventional building. Also, the studies on air-conditioning needs resulted in energy savings of 1577.136 kWh per year for the Typha building, i.e. 1219 kg per year of CO<sub>2</sub> avoided in the air according to the SENELEC emission factor 0.773/MWh in Senegal.
文摘The present work evaluated the properties of modified concrete using polyethylene terephthalate (PET) bottle waste as a partial replacement for coarse aggregate. Modified concrete samples were designed using a water/cement (W/C) ratio of 0.50 and varying percentages of PET replacement (3%, 7%, 10%, and 15% by volume). Dreux Gorisse’s formulation approach was used to make the final products, and the mechanical properties of the samples were determined using Controlab presses. This modified concrete with PET chips has shown that with a 10% replacement of PET chips, the fresh density decreases by 3.56%, and the hardened state density decreases by 2.01%. The water absorption and thermal conductivity of the formulated concretes decreased. However, the results showed that the slump of these fresh concretes increased as the percentage of plastic aggregate replacement increased. Based on the results, incorporating PET aggregates into concrete contributes to good workability, and lightweight concrete structures, and provides some thermal comfort in concrete structures.
文摘The present work investigated the effect of polyethylene terephthalate (PET) plastic waste on the physico-mechanical and thermal properties of cement-stabilized laterite bricks to see the durability of the modified bricks (CSLB). Samples were formulated by mixing laterite, cement, and different percentages of PET (0%, 3%, 5%, and 7%) by volume. The bricks were produced using the M7MI Hydraform standard interlocking block and kept in the shade for a curing period of 28 days. The addition of 3% to 5% PET to the laterite stabilized with 10% cement results in a decrease in both dry and wet compressive strength, which is determined using the Controlab compression machine. However, the obtained results are in concordance with the standards. The thermal conductivity of CSLB, determined using the box method with the EI700 measurement cell, decreases as the PET content of the mixture increases. A decrease in bulk density from 1.67 to 1.58 g/cm<sup>3</sup> was observed.