Preparation of new hybrid organic/inorganic polymeric chiral stationary phases for ligand-exchange chromatography

Three new hybrid organic/inorganic polymeric ligand-exchange chiral stationary phases were developed by radical chain transfer reaction and surface grafting on silica gel, and successfully used for the enantioseparations of DL-amino acids and DL-hydroxyl adds. The resolutions were achieved by using water containing 2.0 × 10^-4 mol/L of CuAc2 as a mobile phase, column temperature of 40 ℃, flow rate of 1.0 mL/min and detection at UV 254 nm. The elution order of D-isomer before L-isomer was observed for all DL-amino acids resolved except DL-Pro.

Preparation of novel chiral stationary phase based on click chemistry for ligand exchange chromatography

Click chemistry was applied to immobilize L-proline derivative onto azide-modified silica gel to give a novel chiral stationary phase （denoted as click-CSP） for ligand exchange chromatography. The developed protocol combines the benefits of operational simplicity, exceptionally mild conditions and high surface loadings. The enantioselectivity α of some DL-arnino acids on the click- CSP were found to be in the range from 1.13 to 3.46. The chromatographic resolutions of some DL-amino acids and the stability study firmly illustrate the potential of click chemistry for preparation chiral stationary phase for ligand exchange chromatography.

CATIONIC POLYMERIZATION OF 1,3—PENTADIENE INITIATED BY ORGANIC AZIDE/Et_2AlCl

The cationic polymerization of 1, 3-pentadiene was initiated by the organic azide/Et_2 AlClinitiating system in CH_2Cl_2 and n-hexane. The polymerizations were also carried out in parallelwith organic chloride/Et_2AlCl and Et_2 AlCl alone for comparison. The Et_2 AlCl- induced polymer-ization gives a low yield while the polymerization initiated by organic chloride/Et_2 AlCl producesmainly insoluble product. In contrast, the polymerization with azide/Et,AlCl has a high conver-sion and the resulting polymer having a high molecular weight is totally soluble. The SEC spectraof the polymers have clearly shown the differences between these initiating systems.

Characterization of A New Organic Photochromic Compound

A new organic photochromic compound, 1-phenyl-3-methyl-4-(4-fluoro)-benzal-5-pyrazolone ethanyl-thiosemicarbazone (PM4FBP-ETSC) was found to undergo photochromic reactions in the solid state. Upon irradiation with 365nm light the white powder sample turned light yellow. The photochromic properties were characterized by the time-dependent UV-vis reflective spectra. The structure of PM4FBP-ETSC was determined by single crystal X-ray diffraction.……

Asymmetric Michael Addition of Activated Alkenes to Nitro Alkenes Catalyzed by Organic Catalyst

Enantioselective Michael addition is one of the most powerfulbond-forming reaction in organic synthesis. [1] A mong the Michael acceptors, nitro alkenes are very attractive, because the nitro group is the most electron-withdrawing group known and it can serve as masked functionality to be further transformed after the addition has taken place. [2] Recently, asymmetric Michael reactions catalyzed by organic catalyst have draw much attention.[3]……

Preparation and Characterization of Novel Ti-doped M-site Deficient Olivine LiFePO_4

A novel Ti-doped M-site deficient olivine LiFePO4, i.e. Li0.95Fe0.95Ti0.05PO4, was synthesized by a solid-state reaction method. XRD and VTR were used to characterize the as-prepared samples. As a cathode material for lithium-ion batteries, Li0.95Fe0.95Ti0.05PO4 exhibited improved rate capability.

Molybdosphoric Acid Mixed with Titania Used as a Catalyst to Synthesize Diphenyl Carbonate via Transesterification of Dimethyl Carbonate and Phenol

The 12-molybdosphoric acid mixed with titania （MPA-TiO2） was found to be a novel and efficient catalyst for the synthesis of diphenyl carbonate （DPC） via transesterification of dimethyl carbonate （DMC） and phenol. The X-ray diffraction （XRD） and infrared （IR） techniques were employed to characterize the prepared catalysts. The effect of the weight ratio of the 12-molybdosphoric acid to titania on the transesterification was investigated. A 13.1% yield of DPC and an 11.6% yield of methyl phenyl carbonate （MPC） were obtained over MPA-TiO2 with the weight ratio of MPA to TiO2 as 5：1.

Silver modified Cu/SiO2 catalyst for the hydrogenation of methyl acetate to ethanol

A series of silver modified Cu/SiO2 catalysts were synthesized with ammonia-evaporation method and applied in vapor-phase hydrogenation of methyl acetate to ethanol.The influence of additive‘Ag’on the structural evolution of catalyst was systematically studied by several characterization techniques,such as N2 adsorption–desorption,N2O titration,PXRD,FTIR,in-situ FTIR,H2-TPR,H2-TPD,XPS and TEM.Results showed that incorporation of a small amount of Ag could enhance the structural stability,and the strong interaction between Cu and Ag species was conducive to increase the dispersion of copper species and create a suitable Cu+/(Cu0+Cu+)ratio,which was proposed to be responsible for the improved catalytic activity.The maximum conversion of MA(94.1%)and selectivity of ethanol(91.3%)over optimized Cu-0.5 Ag/SiO2 and 120 h on stream without deactivation under optimal conditions demonstrates its excellent stability.

Studies on the Simultaneous Synthesis of Dimethyl Carbonate and Poly(ethylene terephthalate): I. Catalytic Activity of Metal Acetate in Transesterification of Ethylene Carbonate with Dimethyl Terephthalate

A novel direct method for preparation of dimethyl carbonate and poly（ethylene terephthalate） from ethylene carbonate and dimethyl terephthalate has been demonstrated in the presence of metal acetate catalysts, lithium acetate dihydrate showed highest catalytic activity with 47.9% yield of dimethyl carbonate. This method was a green chemical process.

Synthesis and Crystal Structural Characterization of a Thiosemicarbazone Derived from 4-Acylpyrazolone

The reaction of 4-（p-fluobenzoyl）-2,5-dihydro-3-methyl-1-phenyl pyrazol-5-one with thiosemicarbazide in MeOH followed by recrystallization in EtOH gave rise to yellowish lamellar crystals of 4（p-fluo-a-aminothiocarbonyl hydrazonobenzal）-2,5-dihydro-3-methyl- 1-phenyl pyrazol-5-one 1. It crystallizes in orthorhombic, space group Pbca with a = 18.445（4）, b = 11.987（2）, c = 19.249（4） °A,, V= 4256.1（18）°A^3, Z = 8, Mr = 415.49, Dc= 1.297 g/cm^3, T = 296（2） K, F（000） = 1744,μ（MoKα） = 0.186 cm^-1, R = 0.0521 and wR = 0.1211 for 1661 observed reflections with I 〉 2σ（I）. The compound was structurally characterized by elemental analyses, IR and ^1H NMR. The intermolecular hydrogen bonds are present and a two-dimensional framework is formed by two intermolecular hydrogen bonds in the （001） plane.

A New Kind of Biomaterials—Bullfrog Skin Collagen

Pepsin-soluble collagen was prepared from bullfrog skin and partially characterized. This study revealed interesting differences, such as molecular weight, amino acid composition, denaturation temperature (Td), in the frog skin collagen when compared to the known vertebrate collagens. This study gives hints that bullfrog skin can be a potential, safe alternative source of collagen from cattle for use in various fields.

Simultaneous Synthesis of Dimethyl Carbonate and Poly（ethylene terephthalate） Using Alkali Metals as Catalysts

Dimethyl carbonate （DMC） and poly（ethylene terephthalate） was simultaneously synthesized by the transesterification of ethylene carbonate （EC） with dimethyl terephthalate （DMT） in this paper. This reaction is an excellent green chemical process without poisonous substance. Various alkali metals were used as the catalysts. The results showed alkali metals had catalytic activity in a certain extent. The effect of reaction condition was also studied. When the reaction was carded out under the following conditions： the reaction temperature 250℃, molar ratio of EC to DMT 3 ： 1, reaction time 3h, and catalyst amount 0.004 （molar ratio to DMT）, the yield of DMC was 68.9%.

Isolation and Crystal Structure of Trans-2,2',4,4'-tetramethyl-6,6'-dinitro Azobenzene

Trans-2,2?,4,4?-tetramethyl-6,6?-dinitro azobenzene (C16H16N4O4, Mr = 328.32) was isolated from benzene extract of the leaves of Aconitum sungpanense Hand. Mazz. as a new compound, and characterized by spectral methods and X-ray diffraction analysis. It crystallizes in monoclinic system, space group P21/c with a = 8.544(1), b = 13.997(2), c = 7.161(1) ? ?= 112.97(1), V = 788.4(2) ?, Z = 4, Dc = 1.383 g/cm3, F(000) = 344 and ?MoKa) = 0.102 mm-1. The final R = 0.0395 and wR = 0.1140 for 1913 independent reflections with Rint = 0.0109 and 1329 observed reflections with I > 2s(I). The molecule is composed of two phenyl rings through trans N=N.

Influence of graphene oxide on electrochemical performance of Si anode material for lithium-ion batteries

We have developed a Si/graphene oxide electrode synthesized via ultrasonication-stirring method under alkaline condition. Scanning electron microscopy(SEM), transmission electron microscope(TEM), EDS dot-mapping and high-resolution transmission electron microscopy(HRTEM) results show that Si particles are evenly dispersed on the graphene oxide sheets. The electrochemical performance was investigated by galvanostatic charge/discharge tests at room temperature. The results revealed that Si/graphene oxide electrode exhibited a high reversible capacity of 2825 mAh/g with a coulombic efficiency of 94.6%at 100 mA/g after 15 cycles and a capacity retention of 70.8% after 105 cycles at 4000 mA/g. These performance parameters show a great potential in the high-performance batteries application for portable electronics, electric vehicles and renewable energy storage.

Synthesis of Molecularly Imprinted Polymer Particles by Suspension Polymerization in Silicon Oil

Molecularly imprinted polymers using 2,4-dichlorophenoxyacetic acid （2,4-D） as templates were prepared by suspension polymerization in silicon oil. The polymer particles exhibited regular shape in the micro-scale range. The adsorbing experiments indicated that the imprinted polymer particles possessed higher affinity to 2,4-D than the non-imprinted polymer particles.

A chain-like compound of Si@CNT nanostructures and MOF-derived porous carbon as an anode for Li-ion batteries

Silicon anodes are considered to have great prospects for use in batteries;however,many of their defects still need to be improved.The preparation of hybrid materials based on porous carbon is one of the effective ways to alleviate the adverse impact resulting from the volume change and the inferior electronic conductivity of a silicon electrode.Herein,a chain-like carbon cluster structure is prepared,in which MOF-derived porous carbon acts as a shell structure to integrally encapsulate Si nanoparticles,and CNTs play a role in connecting carbon shells.Based on the exclusive structure,the carbon shell can accommodate the volume expansion more effectively,and CNTs can improve the overall stability and conductivity.The resulting composite reveals excellent rate capacity and enhanced cycling stability;in particular,a capacity of 732 mA·h·g^(-1) at 2 A·g^(-1) is achieved with a reservation rate of 72.3% after cycling 100 times at 1 A·g^(-1).

Different crystallinity of poly(d,l-lactide-co-p-dioxanone) copolymers acquired by control of chain microstructure

Poly（d,l-lactide-co-p-dioxanone） （P（LA-co-PDO）） copolymers with different chain microstructures were synthesized by onestep or two-step bulk ring-opening polymerizations of d,l-lactide （LA） and p-dioxanone （PDO） monomers using stannous octoate [Sn（Oct）2]/n-dodecanol as the initiating system. The average sequence lengths of the lactidyl （LLA） and dioxanyl （LpDo） units were calculated from the ^1H NMR spectra. It was found that both LLA and Lpoo values from the two-step syntheses were significantly longer than those from the corresponding one-step syntheses, indicating more blocky structure achieved for the twostep copolymers. Corresponding to this difference in microstructure, the two-step copolymers were semi-crystalline, while the one-step copolymers were completely amorphous. In conclusion, the crystallinity of P（LA-co-PDO） copolymers could be adjusted conveniently to meet specific applications by changing the microstructure of the copolymers via different polymerization routes.

ORGANOMETALLIC FERROELECTRIC LIQUID CRYSTALS Ⅰ. LIQUID CRYSTAL PROPERTIES OF ORTHO—PALLADATED BINUCLEAR COMPLEXES OF AZINE, IMINE AND AZO DERIVATIVES

The mesomorphie properties of title complexes are investigated by means of DSC and polarizing microscopy. The mesophase temperature ranges of complexes are wider than that of corresponding organic ligands. The bridging groups of the complexes have profoand effects on the mesomorphic behavior, When the bridging groups are opticallhy active. the compleve show chiral smectic

Condensation reaction of formaldehyde and methyl formate catalyzed by a composite catalyst system

The condensation reaction of formaldehyde and methyl formate to form methyl glycolate and methyl methoxy acetate catalyzed by p-toluenesulfonic acid and different Lewis acid compounds has been investigated. The composite catalytic system consisting of p-toluenesulfonic acid and NiX2 （X = Cl, Br, I）, especially NiI2, exhibited a high catalytic performance for the condensation reaction, the total yield of MG and MMAc was up to 72.37%.

Catalytic Systems Containing p-Toluenesulfonic Acid for the Coupling Reaction of Formaldehyde and Methyl Formate

The coupling reaction of formaldehyde （FA） and methyl formate （MF） to form methyl glycolate （MG） and methyl methoxy acetate （MMAc）, catalyzed by p-toluenesulfonic acid （p-TsOH） as well as assisted by different kinds of solvents or Ni-containing compounds, had been investigated. The results showed that when the reaction was carried out at 140 ℃, with a molar ratio of FA to MF of 0.65 ： 1, molar fraction of p-TsOH to total feedstock of 11.0%, and reaction time of 3 h, the yield of MG and MMAc was 31.1% and 17.1%, respectively, p-TsOH catalyzed the coupling reaction by means of the synergistic catalysis of protonic acidity and soft basicity. Adding extra solvents to the reaction system was unfavorable for the reaction. The composite catalytic system consisting of p-TsOH and NiX2 （X=Cl, Br, I） exhibited a high catalytic performance for the coupling reaction, and NiX2 acted as a promoter in the reaction, whose promotion for the catalysis increased in the following order： NiCl2〈NiBr2〈NiI2. The present system is less corrosive when compared with the previous system, in which strong inorganic liquid acids were used as catalysts.