Physicochemical Properties of the Seed Oil of Khaya senegalensis

The physicochemical characteristics of Khaya senegalensis seed oil were investigated. Iodine value, saponification value, percentage free fatty acid (FFA), acid value, and peroxide value were the chemical parameters examined in the oil analysis, while specific gravity and refractive index were examined as physical parameters. The results showed that the acid value was 1.18 ± 0.01, the saponification value was 191.76 ± 0.01 mgKOH/gm, and the iodine value was 102.79 ± 0.01. It contained 0.59 ± 0.01 percent free fatty acid. The value of peroxide was 6.83 ± 0.01 meq/kg. The results showed that the refractive index was 1.462 ± 0.02 and the specific gravity was 0.9194 ± 0.04. The established parameters fell within the worldwide and Nigerian vegetable oil industry standards.

Evaluation of Physicochemical Parameters of Biosorbents Produced from Groundnut Hull Using Microwave Assisted Irradiation Method

Samples of ground nut hull were converted to biosorbents using microwave assisted method [groundnut hull treated with hydrogen peroxide (HP-GH), groundnut hull treated with distilled water (W-GH) and raw groundnut hull (R-GH)]. The biosorbents were further characterized using physicochemical procedures (pH dependence, bulk density, surface area, ash content, and volatile matter, moisture content). The results show that HP-GH has pH = 8.9, W-GH pH = 8.4 and R-GH pH = 8.5 which is an indication that all the biosorbents have the appropriate pH values for the uptake of cationic species within aqueous systems. Surface area analysis revealed that HP-GH has the largest surface area (74.20 m2·g-1) while W-GH and R-GH have surface area values of 29.40 m2·g-1 and 21.40 m2·g-1 respectively. This suggests that modification of raw groundnut hull biomass with hydrogen peroxide possibly instigated delignification of the biomass which resulted in increased surface area for HP-GH. Results from Bulk density analysis also confirm the data obtained from surface area analysis. Accordingly, R-GH displayed the highest bulk density followed by W-GH with HP-GH showing the least bulk density. The variation in pH values among the biomass used in this study may be explained by the variation in their ash content as well because pH and ash content are positively correlated. Hence, HP-GH with a pH = 8.9 has high ash content (117.31%), W-GH with pH = 8.4 has 97.93% ash content and R-GH with pH = 8.5 has 94.26% ash content. Results from moisture content analysis show that HP-GH (99.95%), W-GH (99.97%) and R-GH (99.89%) may necessitate exposure of the biosorbents to moderate heat before use. The results obtained from this study suggest that modification of ground nut hull with either distilled water or Hydrogen peroxide by means of microwave irradiation improves physicochemical properties which may perhaps increase the adsorption capacity of the biomass.

Distribution, health and ecological risk assessments of trace elements in Nigerian oil sands

The Nigerian oil sands represent the largest oil sand deposit in Africa, yet there is little published information on the distribution and potential health and ecological risks of trace elements in the oil resource. In the present study, we investigated the distribution pattern of 18trace elements(including biophile and chalcophile elements) as well as the estimated risks associated with exposure to these elements. The results of the study indicated that Fe was the most abundant element, with a mean concentration of 22,131 mg/kg while Br had the lowest mean concentration of 48 mg/kg. The high occurrence of Fe and Ti suggested a possible occurrence of ilmenite(Fe TiO_(3)) in the oil sands. Source apportionment using positive matrix factorization showed that the possible sources of detected elements in the oil sands were geogenic, metal production, and crustal. The contamination factor, geo-accumulation index, modified degree of contamination, pollution load index, and Nemerow pollution index indicated that the oil sands are heavily polluted by the elements. Health risk assessment showed that children were relatively more susceptible to the potentially toxic elements in the oil sands principally via ingestion exposure route(HQ > 1E-04). Cancer risks from inhalation are unlikely due to CR < 1E-06 but ingestion and dermal contact pose severe risks(CR > 1E-04). The high concentrations of the elements pose serious threats due to the potential for atmospheric transport, bioaccessibility, and bioavailability.

Removal of Dye Using Lignin-Based Biochar/Poly(ester amide urethane)Nanocomposites from Contaminated Wastewater

The pursuit of incorporating eco-friendly reinforcing agents in polymer composites has accentuated the exploration of various natural biomass-derived materials.The burgeoning environmental crisis spurred by the discharge of synthetic dyes into wastewater has catalyzed the search for effective and sustainable treatment technologies.Among the various sorbent materials explored,biochar,being renewable,has gained prominence due to its excellent adsorption properties and environmental sustainability.It has also emerged as a focal point for its potential to replace other conventional reinforcing agents,viz.,fumed silica,aluminum oxide,treated clays,etc.This study introduces a novel class of polymer nanocomposites comprising of lignin-based biochar particles and poly(ester amide urethane)matrix via a feasible method.The structural evaluation of these nanocomposites was accomplished using Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,and powder X-ray diffraction.The polymer nanocomposites exhibited superior mechanical properties with an increment in tensile strength factor by 45%in comparison to its pristine matrix,along with an excellent toughness value of 90.22 MJm^(−3)at a low loading amount of only 1 wt%.The composites showed excellent improvement in thermal properties with a sharp rise in the glass transition temperature(Tg)value from−28.15℃to 84℃,while also championing sustainability through inherent biodegradability attributes.Beyond their structural prowess,these polymer nanocomposites demonstrated excellent potential as adsorbents,displaying efficient removal of malachite green and tartrazine dyes from aqueous systems with a removal efficiency of 87.25%and 73.98%,respectively.The kinetics study revealed the pseudo second order model to be the precision tool to assess the dye removal study.Complementing this,the Langmuir adsorption isotherm provided a framework to assess the sorption features of the polymer nanocomposites.Overall,these renewable biochar integrated polymer matrices boast remarkable recovery capabilities up to seven cycles of usage with an excellent dye recovery percentage of 95.21%for the last cycle,thereby defining sustainability as well as economic feasibility.

Efficient Sequestration of Congo Red Dye from Aqueous Solutions Using Pamam Dendrimer-Silica Composite

This study investigates the removal of Congo Red dye from aqueous solution using functionalized generation 3.0 and 5.0 polyamidoamine dendrimer-silica gel composite (G-3PS, G-5PS). Fourier Transform-Infra Red spectroscopy, Brunauer Emmett and Teller, Thermo Gravimetric Analysis, pH at point of zero charge, and scanning electron microscopy measurements have been applied to characterize the synthetic nanohybrid composite, these techniques revealed the successful functionalization of both dendrimer molecules and subsequent immobilization onto silica gel. The implications of varying adsorption parameters such as contact time, initial concentration of adsorbate, temperature and pH on both composites were studied. Experimental data obtained from batch adsorption processes were fitted into two equilibrium isotherms (Langmuir and Freundlich) and 3 kinetic models (Pseudo-First-Order, Pseudo-Second-Order, Intra Particle Diffusion). Adsorption mechanism was mainly governed by film diffusion due to electrostatic interactions between the functionalized dendrimer surface and Congo Red molecules. Thermodynamic parameters illustrate that the adsorption is endothermic and spontaneous. Findings suggest the Nanocomposites (G-3PS and G-5PS) are good adsorbents for the removal of Congo Red dye from aqueous solutions.

Performance of Continuous Wavelet Transform over Fourier Transform in Features Resolutions

This study presents a comparative analysis of two image enhancement techniques, Continuous Wavelet Transform (CWT) and Fast Fourier Transform (FFT), in the context of improving the clarity of high-quality 3D seismic data obtained from the Tano Basin in West Africa, Ghana. The research focuses on a comparative analysis of image clarity in seismic attribute analysis to facilitate the identification of reservoir features within the subsurface structures. The findings of the study indicate that CWT has a significant advantage over FFT in terms of image quality and identifying subsurface structures. The results demonstrate the superior performance of CWT in providing a better representation, making it more effective for seismic attribute analysis. The study highlights the importance of choosing the appropriate image enhancement technique based on the specific application needs and the broader context of the study. While CWT provides high-quality images and superior performance in identifying subsurface structures, the selection between these methods should be made judiciously, taking into account the objectives of the study and the characteristics of the signals being analyzed. The research provides valuable insights into the decision-making process for selecting image enhancement techniques in seismic data analysis, helping researchers and practitioners make informed choices that cater to the unique requirements of their studies. Ultimately, this study contributes to the advancement of the field of subsurface imaging and geological feature identification.

Himalayas as a global hot spot of springtime stratospheric intrusions:Insight from isotopic signatures in sulfate aerosols

Downward transport of stratospheric air into the troposphere(identified as stratospheric intrusions)could potentially modify the radiation budget and chemical of the Earth's surface atmosphere.As the highest and largest plateau on earth,the Tibetan Plateau including the Himalayas couples to global climate,and has attracted widespread attention due to rapid warming and cryospheric shrinking.Previous studies recognized strong stratospheric intrusions in the Himalayas but are poorly understood due to limited direct evidences and the complexity of the meteorological dynamics of the third pole.Cosmogenic^(35)S is a radioactive isotope predominately produced in the lower stratosphere and has been demonstrated as a sensitive chemical tracer to detect stratospherically sourced air mass in the planetary boundary layer.Here,we report 6-month(April–September 2018)observation of^(35)S in atmospheric sulfate aerosols(^(35)SO_(4)^(2-))collected from a remote site in the Himalayas to reveal the stratospheric intrusion phenomenon as well as its potential impacts in this region.Throughout the sampling campaign,the^(35)SO_(4)^(2-)concentrations show an average of 1,070±980 atoms/m^(3).In springtime,the average is 1,620±730 atoms/m^(3),significantly higher than the global existing data measured so far.The significant enrichments of^(35)SO_(4)^(2-)measured in this study verified the hypothesis that the Himalayas is a global hot spot of stratospheric intrusions,especially during the springtime as a consequence of its unique geology and atmospheric couplings.In combined with the ancillary evidences,e.g.,oxygen-17 anomaly in sulfate and modeling results,we found that the stratospheric intrusions have a profound impact on the surface ozone concentrations over the study region,and potentially have the ability to constrain how the mechanisms of sulfate oxidation are affected by a change in plateau atmospheric properties and conditions.This study provides new observational constraints on stratospheric intrusions in the Himalayas,which would further provide additional information for a deeper understanding on the environment and climatic changes over the Tibetan Plateau.

Direct Correlation among Telomere Length, Cellular Aging, and Rejuvenation Effects of Honey Child Powder

Purpose: Telomere length (TL) is an indicator of age;however, hormonal influences complicate individual aging. It remains unclear whether TL shortening is a direct factor in both individual and cellular aging. Therefore, we examined the direct relationship between TL and cellular senescence at the cellular level. Methods: Telomerase activity, TL, and gene expression were measured in cultured human lung-, fetal-, and skin-derived fibroblasts, human skin keratinocytes, and telomerase reverse transcriptase (TERT) gene-immortalized cells using detection kits, Cawthon’s method, and reverse transcription-quantitative polymerase chain reaction, respectively. Novel substances that elongate telomeres were screened to confirm cell rejuvenation effects. Results: Long-term cell culture of TIG-1-20 normal human fibroblasts resulted in TL shortening, decreased division rate, and senescence progression, whereas in OUMS-36T-2 cells, TL elongation via TERT gene transfer increased the division rate, reduced endoplasmic reticulum stress, and upregulated genes associated with young individuals, indicating that cellular rejuvenation occurs via TL elongation. In addition, a honey child powder (HCP) extract was found through screening, and the HCP extract strongly suppressed the menin gene, resulting in increased telomerase activity and extended cell lifespan. Upon addition of the HCP extract to skin fibroblasts, gene expression of moisturizing components, including collagen, hyaluronic acid, and elastin, increased, and exhibited a rejuvenating effect with an increase in elastin amount. Conclusions: TL elongation or shortening is involved in cell proliferation rate and cellular aging, and TL elongation rejuvenates cells. In addition, HCP extract has a rejuvenating effect on cells and is expected to be a rejuvenating compound.

Chemical composition,antioxidant and antibacterial activities of essential oil and methanol extract of Artemisia vulgaris and Gaultheria fragrantissima collected from Nepal

Objective: To identify the chemical constituents and biological activities of essential oil and crude methanol extract of Artemisia vulgaris(A.vulgaris) and Gaultheria fragrantissima(G.fragrantissima).Methods: Phytochemical screening, total phenolic and flavonoid content, antibacterial activities, anti-oxidant assay of the crude extract were carried out to identify the biological activities and phytonutrients present in the extract.Furthermore, the chemical constituents present in the essential oil and crude methanol extract were analyzed using gas chromatography mass spectroscopy and high performance liquid chromatography(HPLC) analysis.Results: Gas chromatography mass spectroscopy analysis of essential oil from the aerial part of A.vulgaris revealed 24 different compounds in it.Sabinene(11.29%), b-thujone(19.19%), chrysanthenone(4.48%), camphor(11.89%), borneol(4.44%) and germacrene D(8.42%) were the major compounds.Similarly, leaves of G.fragrantissima contained methyl salicylate(95%) and asarone(4.64%).Furthermore, methanol extract of leaves of A.vulgaris and G.fragrantissima were found rich in the total flavonoids and phenolic content.HPLC analysis of the methanol extract of leaves A.vulgaris revealed the presence of morin and luteolin, whereas rutin was found as a major flavonoids compound in the leaves of G.fragrantissima.Further, methanol extract of the A.vulgaris and G.fragrantissima showed the highest antioxidant and antibacterial properties compared to the essential oil.Conclusions: The HPLC analysis of the methanol extract of A.vulgaris shows the presence of luteolin and morin, whereas G.fragrantissima reveals the presence of rutin and a glycosylated flavonoids.Results reveal that A.vulgaris oil is the rich source of monoterpene and sesquiterpene compounds.Furthermore, A.vulgaris and G.fragrantissima are the rich source of the phenolic and flavonoids compounds and show good antioxidant and antibacterial activity.

Larvicidal efficacies and chemical composition of essential oils of Pinus sylvestris and Syzygium aromaticum against mosquitoes

Objective:To assess the chemical composition and mosquito larvicidal potentials of essential oils of locally sourced Pinus sylvestris(P.sylvestris)and Syzygium aromatkum(S.aromaticum)against Aedes aegypti(A.aegypti)and Culex quinquefasciatus(C.quinquefasciatus).Method:The chemical composition of the essential oils of both plants was determined using GCMS while the larvicidal bioassay was carried out using different concentrations of the oils against the larvae of A.aegypti and C.quinquefasciatus in accordance with the standard protocol.Results:The results as determined by GC-MS showed that oil of S.aromaticum has eugenol(80.5%)as its principal constituent while P.sylvestris has 3-Cyclohexene-1-methanol,.alpha.,.alpha.4-trimethyl(27.1%)as its dominant constituent.Both oils achieved over 85%larval mortality within24 h.The larvae of A.aegypti were more susceptible to the oils[LC_(50)(S.aromaticum)=92.56 mg/L,LC_(50)(P.sylvestris)=100.39 mg/L]than C.quinquefasciatus[LC_(50)(S.aromaticum)=124.42 mg/L;LC_(50)(P.sylvestris)=128.00 mg/L].S.aromaticum oil was more toxic to the mosquito larvae than oil of P.sylvatris but the difference in lethal concentrations was insignificant(P>0.05).Condusioii:The results justify the larvicidal potentials of both essential oils and the need to incorporate them in vector management and control.

Geochemical significance of tricyclic and tetracyclic terpanes in source rock extracts from the Offshore Niger Delta Basin,Nigeria

Tricyclic and tetracyclic terpanes are important constituents of crude oil and source rock extracts.However,they have not been reported in the Offshore Niger Delta Basin,Nigeria.Thus,the present study investigated the geochemical significance of tricyclic and tetracyclic terpanes in source rock extracts from the Offshore Niger Delta Bain,Nigeria with gas chromatography-mass spectrometry(GC-MS).The total relative abundances of tricyclic terpanes,C_(19)TT-C_(21)TT,and C_(23) TT in the rock samples ranged from 82.50 to 96.37%,50.08 to 74.17%,and 25.83 to 49.92%,respectively.These values showed the source rocks were formed from a mixed origin(terrestrial and marine).Among the tricyclic and tetracyclic terpanes identified in the rock extracts,the conventional(C_(20)TT,C_(23)TT,C_(24)TT,C_(24)TeT)and recent(Y1,X1,Z1)were more prominent than all others,indicating mixed input of terrigenous and marine organic matter.The C_(24)TT/C_(23)TT,C_(24)TeT/(C_(24)TeT+C_(26)TT),C_(19)TT/C_(23)TT,C_(20)TT/C_(23)TT,C_(25)TT/C_(24)TeT,C_(25)TT/C_(26)TT,C_(19)TT/C_(20)TT,C_(24)TeT/C_(26)TT,Z1/(Z1+C_(24)TT),and Y1/(Y1+C_(24)TT)in the rock samples range from 0.33 to 1.30,0.76 to 0.90,0.18 to 0.73,0.34 to 1.05,0.33 to 1.74,0.30 to 1.39,0.31 to0.89,1.66 to 4.33,0.36 to 0.83,and 0.34 to 0.79,respectively.These values further showed that the rock samples were formed from mixed input of terrigenous and marine organic matter and deposited under oxic to suboxic conditions in lacustrine-fluvial/deltaic environments.Also,the C_(24)TeT/C_(20)-26TT,C_(24)TeT/C_(30)HOP,and C_(23)TT/C_(30)HOP ranged from 0.16 to 0.45,0.02 to 0.42,and 0.01 to 0.48,respectively.This range of values suggests that source rocks were within immature to early mature stage.Thus,this study showed that tricyclic and tetracyclic terpanes were effective in determining the origin,depositional environments,and thermal maturity of source rocks in the Niger Delta Basin,Nigeria.

Physico-Chemical Characterization of Akoko Mined Kaolin Clay

Over the past several decades, kaolin has been intensively used in ceramics formulation by the indigene of Erusu Akoko, in south western Nigeria. Kaolin is a clay mineral with wide technological applications in the industry. It finds applications in fiberglass, paper, rubber, tires, ceramics, cements, latex, paint, printing inks, catalysts for petroleum refining, medicines, water treatment, cosmetics and others. In the present work, we studied the mineralogy of Erusu clay that had been in use for several generations without understanding the physico-chemical properties. Samples of the material were pre-treated and subjected to analysis. From our results, Akoko clay exhibited decompositional water loss of 13.23% and 13.14% in air and argon respectively at 1000°C. The Brunanuer-Emmett-Teller (BET) analysis showed that the kaolin clay was majorly a mesoporous material and the isotherm was of the type iv. The micropore surface area obtained from t-plot is 9.06 m2/g indicating that the materials also contain micropore with size and volume of 15.611 ? and 0.265 cc/g respectively. The XRD, IR and TEM analysis confirmed the presence of Kaolin and Quarts as the major constituents of Akoko clay.

Extraction of Chemical Constituents of Bitumen Using a Mixed Solvent System

Several solvents had been used to extract the SARA (Saturate, Aromatic, Resin and Asphaltene) constituents of bitumen. The quantification of such extracts also abounds in open literature but in this work an attempt was made to determine the quality of extraction as a feed stock for processing bitumen using a mixed solvent system. A mixture of heptane and toluene was used to compare with the standard method using heptane. The components were analysed for functional groups of compound types presented in them using Fourier Transform Infrared Spectrophotometry technique (FTIR). The quality of bitumen component extract was not significantly affected by the method of extraction as recommended by the ASTM. The components are mixture of different class of hydrocarbons such as saturated and unsaturated hydrocarbons which conformed to what had earlier been reported by other researchers.

Herbs and management of hypertension:Claims,criticism,and challenges

Hypertension(HTN)is one of the most common chronic diseases affecting over 30%of the adult population globally,with a growing incidence rate.This article aims to identify the commonly used herbs for HTN treatment and examine their claims,criticisms,and challenges.It further aims to provide useful recommendations regarding the use of herbs for HTN treatment.HTN complications,such as coronary heart disease,stroke,peripheral vascular disease,vision impairment,and renal failure can result in morbidity and mortality.The high cost of conventional medications,which sometimes may not even be available or easily accessible with their unfavorable side effects as well as taking more than one pill per day,has led hypertensive patients,particularly those in rural areas,to explore alternative treatments such as herbal therapies.It is crucial to determine the different modes of action,doses,safety,and efficacy of herbal remedies used in combination with conventional medications to improve treatment adherence and enhance patient outcomes.

Determination of Physiochemical Properties of Biosorbents Synthesized from Water Melon Rind Using Microwave Assisted Irradiation Procedure

Three biosorbents were prepared from Watermelon Rind (WMR) using microwave assisted procedure and then characterized using physiochemical techniques (pH, bulk density, volatile matter, surface area, ash content and moisture content). Physiochemical characterization of the synthesized biosorbents was done in order to evaluate their adsorption potentials. Accordingly, results obtained from the experiments conducted revealed the following trend: pH: Water Melon Rind treated with Sodium hydroxide (NaWMR) 8.5 > Water Melon Rind treated with Hydrogen peroxide (HP-WMR) 8.1 > Water Melon Rind treated with Distilled water (DWMR) 6.4 > Untreated Water Melon Rind (UWMR) 5.4, which suggest that NaWMR and HP-WMR possess suitable pH values for the uptake of cationic species within aqueous systems. Surface Area: analysis: UWMR (21.4 m2/g), DWMR (35.8 m2/g), NaWMR (40.6 m2/g) and HP-WMR (61.4 m2/g). This means that HP-WMR has a larger surface area and could be a preferred candidate for adsorption processes. The results obtained from this study suggest that chemical modification of Water Melon Rind (WMR) with either distilled water Sodium Hydroxide or Hydrogen peroxide by means of microwave irradiation enhances physiochemical properties which could boost the adsorption capacity of Water Melon Rind. Thus, the outcome shows that all the three synthesized biosorbents;DWMR, NaWMR and HP-WMR possess the characteristics of a good adsorbent. Accordingly, they can be applied to wastewater treatment process.

Experimental and Quantum Chemical Studies of the Inhibition of Copper with Sodium Dodecyl Sulphate (SDS) in Acidic Medium

This work investigates the inhibitive properties of sodium dodecyl sulphate (SDS) on the corrosion of copper (Cu) in nitric acid using gasometric methods. The inhibition efficiency increases with time and concentration of SDS. The corrosion rate of copper decreases as concentration of SDS increases. Adsorption of the SDS on the surface obeyed the Langmuir adsorption isotherm. The high negative values of the kinetic parameter B suggest that the inhibitor’s effectiveness increases with temperature. The equilibrium constant and the free energy of adsorption of SDS to copper are negative and large. This observation implies that the adsorption mechanism maybe chemisorption. The quantum chemical calculation of copper dodecyl sulphate shows that the energy change in the HOMO-LUMO energy of the moiety is positive and small. This observation implies that the SDS is an efficient inhibitor. The high dipole moment obtained implies that corrosion inhibition of Cu is enhanced by adsorption of SDS and this observation correlates with the observed experimental inhibition efficiency.

Analysis of Chemical Compositions of Portland Cement and Limestone from Four Geopolitical Zones of Nigeria

Cement, a major binding material in concrete making, influences the quality of concrete so produced with it;as such its chemistry dictates the chemistry of the concrete. Poor quality cement has recently been implicated as the main causes of incessant building collapses in Nigeria. The physicochemical analysis of limestone used in the production of various brands of Portland cement in four geopolitical zones of Nigeria (north east NE, north west NW, north central NC, and south west SW) was investigated using standard methods. Each of the limestone and cement samples was randomly collected from their respective sample points at the four different geopolitical zones of Nigeria. Each of the collected samples was ground and sieved to 2 mm mesh size. The limestone was rich in lime content that ranged from 45.91% ± 0.30% to 49.0% ± 0.19%. Among the cement samples, percent SiO2 ranged from 19.95 ± 0.25 (NW) to 20.18 ± 1.02 (NC), Al2O3 4.98 ± 0.18 (NW) to 5.82 ± 0.38 (NE), Fe2O3 2.76 ± 1.00 (NE) to 3.82 ± 0.21 (SW), CaO 60.18 ± 0.27 (NE) to 65.10 ± 0.98 (NC), MgO 1.93 ± 0.04 (NC) to 2.50 ± 0.10 (NE), SO3 0.93 ± 0.50 (NE) to 2.02 ± 0.13 (NW). The results showed that virtually all the cement samples analyzed conformed well to the BSEN 196-2 standard. However, the loss on ignition (LOI) deviated considerably (7.82% to 8.72%) from 4% maximum by the standard. Also, the lime saturation factor (99.70%) obtained for north central cement was slightly higher than the specified range of 92.0 to 98.0%. It could be deduced from this study that the various cements available in Nigerian market from the four geopolitical zones are of good quality. Nevertheless, other processes that lead to the production of a good concrete such as the mix ratio of cement, gravel, sand and water, use and quality of iron rods, and other building materials need to be professionally checked for quality assurance. The findings from this study can be a useful guide to the chemist, environmentalist, construction industry, and the general public on the quality of cements available in Nigerian market.

Harnessing dimethyl ether and methyl formate fuels for direct electrochemical energy conversion

In this work,the oxidation of a mixture of dimethyl ether(DME) and methyl formate(MF) was studied in both an aqueous electrochemical cell and a vapor-fed polymer electrolyte membrane fuel cell(PEMFC)utilizing a multi-metallic alloy catalyst,Pt_(3)Pd_(3)Sn_(2)/C,discovered earlier by us.The current obtained during the bulk oxidation of a DME-saturated 1 M MF was higher than the summation of the currents provided by the two fuels separately,suggesting the cooperative effect of mixing these fuels.A significant increase in the anodic charge was realized during oxidative stripping of a pre-adsorbed DME+MF mixture as compared to DME or MF individually.This is ascribed to greater utilization of specific catalytic sites on account of the relatively lower adsorption energy of the dual-molecules than of the sum of the individual molecules as confirmed by the density fu nctional theory(DFT) calculations.Fuel cell polarization was also conducted using a Pt_(3)Pd_(3)Sn_(2)/C(anode) and Pt/C(cathode) catalysts-coated membrane(CCM).The enhanced surface coverage and active site utilization resulted in providing a higher peak power density by the DME+MF mixture-fed fuel cell(123 mW cm^(-2)at 0.45 V) than with DME(84mW cm^(-2)at 0.35 V) or MF(28 mW cm^(-2)at 0.2 V) at the same total anode hydrocarbon flow rate,temperature,and ambient pressure.

π-Extension and chlorination of non-fullerene acceptors enable more readily processable and sustainable high-performance organic solar cells

Organic solar cells(OSCs)processed without halogenated solvents and complex treatments are essential for future commercialization.Herein,we report three novel small molecule acceptors(NFAs)consisting of a Y6-like core but withπ-extended naphthalene with progressively more chlorinated end-capping groups and a longer branched chain on the Nitrogen atom.These NFAs exhibit good solubilities in nonchlorinated organic solvents,broad optical absorptions,closeπ-πstacking distances(3.63–3.84A),and high electron mobilities(~10^(-3)cm^(2)V^(-1)s^(-1)).The o-xylene processed and as-cast binary devices using PM6 as the donor polymer exhibit a PCE increasing upon progressive chlorination of the naphthalene end-capping group from 8.93%for YN to 14.38%for YN-Cl to 15.00%for YN-2Cl.Furthermore similarly processed ternary OSCs were fabricated by employing YN-Cl and YN-2Cl as the third component of PM6:CH1007 blends(PCE=15.75%).Compared to all binary devices,the ternary PM6:CH1007:YN-Cl(1:1:0.2)and PM6:CH1007:YN-2Cl(1:1:0.2)cells exhibit significantly improved PCEs of 16.49%and15.88%,respectively,which are among the highest values reported to date for non-halogenated solvent processed OSCs without using any additives and blend post-deposition treatments.

Molecular dynamics-driven exploration of peptides targeting SARS-CoV-2,with special attention on ACE2,S protein,M^(pro),and PL^(pro):A review

Molecular dynamics(MD)simulation is a computational technique that analyzes the movement of a system of particles over a given period.MD can provide detailed information about the fluctuations and conformational changes of biomolecules at the atomic level over time.In recent years,MD has been widely applied to the discovery of peptides and peptide-like molecules that may serve as severe acute respiratory syndrome coronavirus 2(SARS-CoV-2)inhibitors.This review summarizes recent advances in such explorations,focusing on four protein targets:angiotensin-converting enzyme 2(ACE2),spike protein(S protein),main protease(M^(pro)),and papain-like protease(PL^(pro)).These four proteins are important druggable targets of SARS-CoV-2 because of their roles in viral entry,maturation,and infectivity of the virus.A review of the literature revealed that ACE2,S protein,and M^(pro) have received more attention in MD research than PL^(pro).Inhibitors of the four targets identified by MD simulations included peptides derived from food and other bioresources,peptides designed using the targets as templates,and peptide-like molecules retrieved from databases.Many of the inhibitors have yet to be validated in experimental assays for potency.Nevertheless,the role of MD simulation as an efficient tool in the early stages of anti-SARS-CoV-2 drug discovery agents has been demonstrated.