Electrokinetic-mechanism of water and furfural oxidation on pulsed laser-interlaced Cu_(2)O and CoO on nickel foam

The electrocatalytic oxidation of biomass-derived furfural(FF)feedstocks into 2-furoic acid(FA)holds immense industrial potential in optics,cosmetics,polymers,and food.Herein,we fabricated Co O/Ni O/nickel foam(NF)and Cu_(2)O/Ni O/NF electrodes via in situ pulsed laser irradiation in liquids(PLIL)for the bifunctional electrocatalysis of oxygen evolution reaction(OER)and furfural oxidation reaction(FOR),respectively.Simultaneous oxidation of NF surface to NiO and deposition of CoO and/or Cu_(2)O on NF during PLIL offer distinct advantages for enhancing both the OER and FOR.CoO/NiO/NF electrocatalyst provides a consistently low overpotential of~359 m V(OER)at 10 m A/cm^(2),achieving the maximum FA yield(~16.37 m M)with 61.5%selectivity,79.5%carbon balance,and a remarkable Faradaic efficiency of~90.1%during 2 h of FOR at 1.43 V(vs.reversible hydrogen electrode).Mechanistic pathway via in situ electrochemical-Raman spectroscopy on CoO/NiO/NF reveals the involvement of phase transition intermediates(NiOOH and CoOOH)as surface-active centers during electrochemical oxidation.The carbonyl carbon in FF is attacked by hydroxyl groups to form unstable hydrates that subsequently undergo further oxidation to yield FA products.This method holds promise for large-scale applications,enabling simultaneous production of renewable building materials and fuel.

Pulsed laser interference patterning of transition-metal carbides for stable alkaline water electrolysis kinetics

We investigated the role of metal atomization and solvent decomposition into reductive species and carbon clusters in the phase formation of transition-metal carbides(TMCs;namely,Co_(3)C,Fe_(3)C,TiC,and MoC)by pulsed laser ablation of Co,Fe,Ti,and Mo metals in acetone.The interaction between carbon s-p-orbitals and metal d-orbitals causes a redistribution of valence structure through charge transfer,leading to the formation of surface defects as observed by X-ray photoelectron spectroscopy.These defects influence the evolved TMCs,making them effective for hydrogen and oxygen evolution reactions(HER and OER)in an alkaline medium.Co_(3)C with more oxygen affinity promoted CoO(OH)intermediates,and the electrochemical surface oxidation to Co_(3)O_(4)was captured via in situ/operando electrochemical Raman probes,increasing the number of active sites for OER activity.MoC with more d-vacancies exhibits strong hydrogen binding,promoting HER kinetics,whereas Fe_(3)C and TiC with more defect states to trap charge carriers may hinder both OER and HER activities.The results show that the assembled membrane-less electrolyzer with Co_(3)C∥Co_(3)C and MoC∥MoC electrodes requires~2.01 and 1.99 V,respectively,to deliver a 10 mA cm−2 with excellent electrochemical and structural stability.In addition,the ascertained pulsed laser synthesis mechanism and unit-cell packing relations will open up sustainable pathways for obtaining highly stable electrocatalysts for electrolyzers.

Manifolding active sites and in situ/operando electrochemical-Raman spectroscopic studies of single-metal nanoparticle-decorated CuO nanorods in furfural biomass valorization to H_(2) and 2-furoic acid

Here,CuO nanorods fabricated via pulsed laser ablation in liquids were decorated with Ir,Pd,and Ru NPs(loading~7 wt%) through pulsed laser irradiation in the liquids process.The resulting NPs-decorated CuO nanorods were characterized spectroscopically and employed as multifunctional electrocatalysts in OER,HER,and the furfural oxidation reactions(FOR).Ir-CuO nanorods afford the lowest overpotential of~345 mV(HER) and 414 mV(OER) at 10 mA cm^(-2),provide the highest 2-furoic acid yield(~10.85 mM) with 64.9% selectivity,and the best Faradaic efficiency~72.7% in 2 h of FOR at 1.58 V(vs.RHE).In situ electrochemical-Raman analysis of the Ir-CuO detects the formation of the crucial intermediates,such as Cu(Ⅲ)-oxide,Cu(OH)_(2),and Ir_x(OH)_y,on the electrode-electrolyte surface,which act as a promoter for HER and OER.The Ir-CuO ‖ Ir-CuO in a coupled HER and FOR-electrolyzer operates at~200 mV lower voltage,compared with the conventional electrolyzer and embodies the dual advantage of energy-saving H_(2) and 2-furoic acid production.

Sustainable Furfural Biomass Feedstocks Electrooxidation toward Value-Added Furoic Acid with Energy-Saving H_(2) Fuel Production Using Pt-Decorated Co_(3)O_(4) Nanospheres

Here,furfural oxidation was performed to replace the kinetically sluggish O_(2)evolution reaction(OER).Pt-Co_(3)O_(4)nanospheres were developed via pulsed laser ablation in liquid(PLAL)in a single step for the paired electrocatalysis of an H_(2)evolution reaction(HER)and furfural oxidation reaction(FOR).The FOR afforded a high furfural conversion(44.2%)with a major product of 2-furoic acid after a 2-h electrolysis at 1.55 V versus reversible hydrogen electrode in a 1.0-M KOH/50-mM furfural electrolyte.The Pt-Co_(3)O_(4)electrode exhibited a small overpotential of 290 mV at 10 mA cm^(-2).As an anode and cathode in an electrolyzer system,the Pt-Co_(3)O_(4)electrocatalyst required only a small applied cell voltage of~1.83 V to deliver 10 mA cm^(-2),compared with that of the pure water electrolyzer(OER||HER,~1.99 V).This study simultaneously realized the integrated production of energy-saving H_(2)fuel at the cathode and 2-furoic acid at the anode.

Enhanced photocatalytic degradation of lindane using metal–semiconductor Zn@ZnO and ZnO/Ag nanostructures

To achieve enhanced photocatalytic activity for the degradation of lindane, we prepared metal–semiconductor composite nanoparticles（NPs）. Zn@ZnO core–shell（CS） nanocomposites, calcined ZnO, and Ag-doped ZnO（ZnO/Ag） nanostructures were prepared using pulsed laser ablation in liquid, calcination, and photodeposition methods, respectively, without using surfactants or catalysts. The as-prepared catalysts were characterized by using X-ray diffraction（XRD）, field-emission scanning electron microscopy, high-resolution transmission electron microscopy, ultraviolet–visible（UV–vis） spectroscopy, and photoluminescence spectroscopy. In addition, elemental analysis was performed by energy dispersive X-ray spectroscopy. The obtained XRD and morphology results indicated good dispersion of Zn and Ag NPs on the surface of the ZnO nanostructures. Investigation of the photocatalytic degradation of lindane under UV–vis irradiation showed that Zn@ZnO CS nanocomposites exhibit higher photocatalytic activity than the other prepared samples. The maximum degradation rate of lindane was 99.5% in 40 min using Zn@ZnO CS nanocomposites. The radical trapping experiments verified that the hydroxyl radical（·OH） was the main reactive species for the degradation of lindane.

Ligand-free monophasic CuPd alloys endow boosted reaction kinetics toward energy-efficient hydrogen fuel production paired with hydrazine oxidation

Optimizing the structure and components is a prevalent strategy for increasing electrocatalytic energy-saving H 2 fuel production.One of the sustainable and efficient techniques is electrocatalytic water split-ting for H 2 generation,but it is still restricted by the kinetically sluggish OER.Due to the lower standard oxidation potential of−0.33 V,replacing the OER with anodic hydrazine oxidation reaction(HzOR)is an effective way to extensively reduce the use of electricity in water electrolysis.Through alloying,the semiconductor and adsorption characteristics of Cu,interlaced by Pd 2+solution on the Pd surface by pulsed laser ablation(PLA)in methanol,are selectively altered to maximize cathodic HER and anodic HzOR performance.The optimal Cu1Pd3/C ratio demonstrates outstanding HER performance with a low overpotential of 0.315 V at 10 mA cm^(−2),as well as an ultralow overpotential of 0.560 V for HzOR in 0.5 M N_(2) H_(4)/1.0 M KOH.Furthermore,the constructed HzOR-assisted electrolyzer cell with Cu1Pd3/C||Cu1Pd3/C as anode and cathode exhibits a cell voltage of 0.505 V at 10 mA cm^(−2) with exceptional en-durance over 5 h.The current study advances competent CuPd alloys as multifunctional electrocatalysts for H 2 fuel production using a HzOR-assisted energy-efficient electrolyzer.