Crystallization Behavior of Copolymer Poly(ethylene terephth-alate/isophthalate)(IPET)

The non-isothermal crystallization kinetics, isothermal crystallization and the morphology of crystals of the copolymer poly (ethylene terephthalate/ isophthalate )(IPET) were studied by DSC and polarized-light microscopy in this paper. DSC results indicate that the glass transition temperature Tg of IPET is slightly lower than that of poly(ethylene terephthalate) (PET), but the melting temperature Tm and the crystallization temperature Tc of PET and IPET have much difference.The difference of Tc between PET and IPET2 is about 7℃, and the difference of Tm between PET and IPET2 is about 16℃. From the kinetics analysis of the crystallization, the crystallization mechanism of all samples is of three-dimension spherulitic growth from instantaneous nuclei and the incorporation of isophthalate (IPA) decreases the crystallization rate of IPET greatly. The isothermal results indicate that the morphologies of PET and IPET crystals are all spherulite, which is in conformity to the results of nonisothermal dynamic crystallization. At the same time,the spherulite of IPET grows slower and has longer incubation time than the spherulite of PET under the same crystallization condition.

Microemulsion Polymerization of Methyl Methacrylate

The microemulsion polymerization of methyl methacrylate was studied. The effects of feeding modes on the structure and the properties of the obtained polymer microlatex were investigated by measuring the conversion, the transmittance and the refractive index of the latex, and by measuring the particle size, the molecular weight and the glass transition temperature (T_g) of the polymers. The results show that compared to the batch feeding mode, the semi-continuous feeding mode is more favorable to form a PMMA microlatex with a higher transmittance, a smaller particle size, a higher molecular weight and a higher T_g. And the obtained PMMA microlatex has a 30%—40% (mass fraction) polymer content, a 0. 03 emulsifier/water weight ratio, a 0. 05 emulsifier/monomer weight ratio and a 17 nm average particle diameter, which is very important for the industrialization of the microemulsion polymerization technique.

Synthesis, Characterization and Vulcanizing Properties of Rare Earth Complexes with 2-Mercaptobenthiazole

Eight complexes of rare earth with 2 mercaptobenthiazole, RELCl 2·RE(OH) 3· x H 2O (L=2 mercaptobenthiazole, RE= La～Gd, Y, except for Pm, x =0, 2～4), were synthesized in unhydrous ethanol and characterized by elemental analyses, IR spectra and thermal analyses. The results show that the ligand is coordinated to the RE ion through both the exocyclic sulfur and the thiazole nitrogen. The vulcanizing properties of the La complex as accelerator were studied in the traditional tire rubber, which indicate that the cross linked rubber accelerated by the rare earth complex has good physical and dynamic mechanical properties by comparison.

Preparation and Properties of Rare Earth Modified Carbon Black/Natural Rubber Composites

The oxides Eu, Ho, Er and Dy were used to prepare the hydroxides of rare earth modified carbon black. Then natural rubber latex （NRL） was added into the reactor. The system reacted at 85 ℃ with stirring for 1 h to prepare powdered HAF-Ln（OH）3/NR composites. The effects of the kind and content of Ln on the particle size distribution of P [ NR/HAF-Ln （OH）3 ] and mechanical properties of its vulcanizate were studied respectively. It is found that rare earth can help to get the powder of the composite, the product particle with a diameter less than 0.9mm will be get when the composites containing the compound of Ho, Er and Dy with dosage of 1.0, 1.0, O. 5 percent, respectively. The adding of Ln can improve the tensile strength and tear strength of the vulcanizate effectively, what＇s more, Er and Dy can decrease the permanent set of vulcanizate significantly. The SEM studies shows that P[ NR/HAF-Dy （OH）3 ] vulcanizate shows superior mechanical properties that depend primarily on the absence of free carbon black, the fine dispersion of carbon black in the rubber matrix and better polymer-filler interaction.

Molecular Modeling of the Chain Structures of Polybenzoxazines

The structures and properties of benzoxazines were investigated by virtue of molecular modeling at a molecular level. By means of Cerius software(version 4.0) supplied by Molecular Simulations Inc., the molecular mechanics and the molecular dynamics were performed under a PCFF force field. Five kinds of the polymeric chains of benzoxazines were created by using polymer builder and energy minimization. The relaxation process was conducted with both energy minimization and molecular dynamics.

Synthesis and Characterization of Ion-exchange Sulfonated Poly (ether sulfone)

N,N＇-Bis（3-hydroxyphenyl）-1,8,4,5-naphthalenetetracarboxylic bisimide was prepared from the reaction of 1,8,4,5-naphthalenetetrcarboxylic acid dianhydride and 2-aminophenol in N, N-dimethylformamide. Polymerization of this bisimide with 4,4＇-difluorodiphenylsulfone and disodium 3,3＇-disulfonate4,4＇-difluorodiphenylsulfone gave ion-exchange sulfonated poly（ether sulfone）. The structure of the title compound was characterized with H-NMR and its polymer was characterized with FT-IR.

THERMAL BEHAVIOR OF THERMOTROPIC HYDROXYETHYL CELLULOSE ACETATE/POLYETHYLENE BLENDS

The thermal behavior of thermotropic hydroxyethyl cellulose acetate (HECA)/polyethylene (PE) blends has been studied by DSC. It is found that the blends of HECA and PE are immiscible but the crystallization of PE is affected by HECA chains in the blends with more than 50% HECA, which results in the subordinate crystallization of PE and the formation of imperfect structures in the PE crystals. The imperfection of PE crystals in the blends can be eliminated after annealing at 393K.

Approaches to Pendent Groups' Functionalization of Polyimide

Pendent groups' functionalization of polyimide is an optimum approach to improve its processability and achieve functionalized polyimide materials. There are two types of modification routes for pendent groups' functionalization of polyimide: monomer route and macromolecular route. In this paper, various approaches for pendent groups' functionalization of polyimide are introduced. At the same time, a new method to achieve functional polyimide materials without decreasing its thermal stability and mechanical properties is mentioned.

Synthesis and Properties of Thermoplastic Polyisocyanurates:Polyisocyanuratoamide,Polyisocyanurato(Ester-Amide)and Polyisocyanurato(Urea-Ester)

It has been proved that introducing isocyanurate into polymer chains could improve the flame retardancy of polymers.We describe in this work the synthesis and the thermal property study of three thermoplastic polyisocyanurates,which are polyisocyanuratoamide(PICA-6),polyisocyanurato(ester amide)(PICEA-6)and polyisocyanurato(urea ester)(PICUE-6).These polymers show similar and improved thermal stability with the existence of isocyanurate rings.PICA-6 is more crystalizable than the rest two and the melting temperature is found to be around 240℃ but it still crystalizes slowly.For PICEA-6 and PICUE-6,only glass transition can be observed on the DSC traces.The glass transition temperature follows the order of PICA-6>PICEA-6>PICUE-6(101.9,77.9 and 28.7℃,respectively).

Micro-polymer Chemistry Experiment Teaching Research

For nearly thirty years, there has been made great progress in micro-polymer chemistry experiment teaching which has these characteristics that using less reagents, less pollution and more portable in comparison with the conventional experiment. In China, Zhou Ninghuai and others began to go on micro-scale experiment research firstly and Professor Li Qingshan who brought this innovation to polymer organic synthesis experiment has done a lot of works in micro-polymer chemistry experiment teaching. To carry out the study of micro-polymer chemistry experiments not only accords with teaching methods and reform, but also conforms to the trend of the times of green chemistry. So the research and application of micro-polymer chemistry experiment have broad prospects.

In-line Plasma-induced Graft-copolymerization of Pentaerythritol Triacrylate onto Polypropylene

Pentaerythritol triacrylate （PETA） was successfully grafted onto the plasma-treated isotactic polypropylene （iPP） via the in situ melt processing. The X-ray photoelectron spectroscopy （XPS） results showed that the hydroxyl and carbonyl groups, and peroxides could be generated via plasma treatment. The content of free radical in plasma-treated iPP （PiPP） was measured by 2,2-diphenyl-1- picrylhydrazyl （DPPH）. It was found that the resulting peroxides induced the grafting copolymerization of PETA onto iPP, and the grafted PETA promoted the formation of β-crystal in PiPP, which was evidenced by Fourier transform infrared spectroscopy （FTIR）, differential scanning calorimetry （DSC） and wide-angle X-ray diffraction （WAXD） measurements, respectively.