A Comprehensive Method for Evaluating Precision of Transfer Alignment on a Moving Base

In this study, we propose the use of the Degree of Alignment(DOA) in engineering applications for evaluating the precision of and identifying the transfer alignment on a moving base. First, we derive the statistical formula on the basis of estimations. Next, we design a scheme for evaluating the transfer alignment on a moving base, for which the attitude error cannot be directly measured. Then, we build a mathematic estimation model and discuss Fixed Point Smoothing(FPS), Returns to Scale(RTS), Inverted Sequence Recursive Estimation(ISRE), and Kalman filter estimation methods, which can be used when evaluating alignment accuracy. Our theoretical calculations and simulated analyses show that the DOA reflects not only the alignment time and accuracy but also differences in the maneuver schemes, and is suitable for use as an integrated evaluation index. Furthermore, all four of these algorithms can be used to identify the transfer alignment and evaluate its accuracy. We recommend RTS in particular for engineering applications. Generalized DOAs should be calculated according to the tactical requirements.

Study of high-precision earth sensor with triple-FOV

Earth sensors are widely used in spacecraft for attitude determination. They need to have a very large field of view(FOV)( > 120°) and relatively low accuracy while being used in the aircrafts around orbit. A triple-FOV infrared earth sensor is proposed in this paper. It uses three pieces of standard infrared detectors with a wavelength range of 14;16μm,to sense the horizontal circle by detecting the infrared light emitted from the earth. From which,the geocentric vector can be obtained. A mathematic model is established and a validation model is set up to provide input parameters for the mathematic model. The simulation results of the two models show that the output of the mathematic model coincides with the known parameters. Based on the above analysis,a prototype has been built and tested. The test results show that the angle measurement error is about 0. 002° and hence such a triple-FOV earth sensor is capable to provide high-precision position information for autonomous navigation.

Precision Controlling of Frequency Difference for Elastic-Stress Birefringence He-Ne Dual-Frequency Lasers

Birefringence-Zeeman dual frequency lasers are capable of producing frequency difference from several kilohertz to hundreds of megahertz, but the precision of giving and stabilizing of the beat frequency still needs improvement to the range of ±200 kHz. We design a new elastic force-exerting device comprised of the bottom part, two arms and two pieces of force-exerting sheets. The frequency difference smoothly tuning is realized with this device in a large range of 2 MHz to 20 MHz. Power-balance frequency stabilization system is used to investigate characters of the temperature, frequency difference and laser power. The precision of the frequency difference has reach up to ±100 kHz after system temperature balance. Analyses of the laser frequency difference and power character are carried out.

GNSS spoofing detection for single antenna receivers via CNR variation monitoring

In this paper,a method for spoofing detection based on the variation of the signal’s carrier-to-noise ratio(CNR)is proposed.This method leverages the directionality of the antenna to induce varying gain changes in the signals across different incident directions,resulting in distinct CNR variations for each signal.A model is developed to calculate the variation value of the signal CNR based on the antenna gain pattern.This model enables the differentiation of the variation values of the CNR for authentic satellite signals and spoofing signals,thereby facilitating spoofing detection.The proposed method is capable of detecting spoofing signals with power and CNR similar to those of authentic satellite signals.The accuracy of the signal CNR variation value calculation model and the effectiveness of the spoofing detection method are verified through a series of experiments.In addition,the proposed spoofing detection method works not only for a single spoofing source but also for distributed spoofing sources.

Multiplexed stimulated emission depletion nanoscopy(mSTED)for 5-color live-cell long-term imaging of organelle interactome

Stimulated emission depletion microscopy(STED)holds great potential in biological science applications,especially in studying nanoscale subcellular structures.However,multi-color STED imaging in live-cell remains challenging due to the limited excitation wavelengths and large amount of laser radiation.Here,we develop a multiplexed live-cell STED method to observe more structures simultaneously with limited photo-bleaching and photo-cytotoxicity.By separating live-cell fluorescent probes with similar spectral properties using phasor analysis,our method enables five-color live-cell STED imaging and reveals long-term interactions between different subcellular structures.The results here provide an avenue for understanding the complex and delicate interactome of subcellular structures in live-cell.

Accuracy Analysis of Stewart Platform Based on Interval Analysis Method

A Stewart platform is introduced in thc 500 m aperture spherical radio telescope（FAST） as an accuracy adjustable mechanism for teed receivers. Accuracy analysis is the basis of accuracy design. However, a rapid and effective accuracy analysis method for parallel manipulator is still needed. In order to enhance solution efficiency, an interval analysis method（lA method） is introduced to solve the terminal error bound of the Stewart platform with detailed solution path. Taking a terminal pose of the Stewart platform in FAST as an example, the terminal error is solved by the Monte Carlo method（MC method） by 4 980 s, the stochastic mathematical method（SM method） by 0.078 s, and the IA method by 2.203 s. Compared with MC method, the terminal error by SM method leads a 20% underestimate while the IA method can envelop the real error bound of the Stewart platform. This indicates that the IA method outperforms the other two methods by providing quick calculations and enveloping the real error bound of the Stewart platform. According to the given structural error of the dimension parameters of the Stewart platform, the IA method gives a maximum position error of 19.91 mm and maximum orientation error of 0.534°, which suggests that the IA method can be used for accuracy design of the Stewart platfbnn in FAST. The 1A method presented is a rapid and effective accuracy analysis method for Stewart platform.

Type Synthesis of 4-DOF Parallel Kinematic Mechanisms Based on Grassmann Line Geometry and Atlas Method

Many methods are proposed to deal with the type synthesis of parallel kinematic mechanisms（PKMs）, but most of them are less intuitive to some extent. Thus, to propose a concise and intuitive type synthesis method for engineering application is a very challenging issue, which should be further studied in the field. Grassmann line geometry, which can investigate the dimensions of spatial line-clusters in a concise way, is taken as the mathematic foundation. Atlas method is introduced to visually describe the degrees of freedom（DOFs） and constraints of a mechanism, and the dual rule is brought in to realize the mutual conversion of the freedom-space and constraint-space. Consequently, a systematic method based on Grassmann line geometry and Atlas method is generated and the entire type synthesis process is presented. Three type 4-DOF PKMs, i.e., 1T3R, 2T2R and 3T1R（T： translational DOF; R： rotational DOF）, are classified according to the different combinations of the translational DOFs and rotational DOFs. The type synthesis of 4-DOF PKMs is carried out and the possible configurations are thoroughly investigated. Some new PKMs with useful functions are generated during this procedure. The type synthesis method based on Grassmann line geometry and Atlas method is intuitive and concise, and can reduce the complexity of the PKMs＇ type synthesis. Moreover, this method can provide theoretical guidance for other PKMs＇ type synthesis and engineering application. A novel type synthesis method is proposed, which solves the existing methods＇ problems in terms of complicated, not intuitive and unsuitable for practical application.

Electrospinning of Flexible Poly(vinyl alcohol)/MXene Nanofiber-Based Humidity Sensor Self-Powered by Monolayer Molybdenum Diselenide Piezoelectric Nanogenerator

Two-dimensional material has been widely investigated for potential applications in sensor and flexible electronics.In this work,a self-powered flexible humidity sensing device based on poly(vinyl alcohol)/Ti_(3)C_(2)Tx(PVA/MXene)nanofibers film and monolayer molybdenum diselenide(MoSe2)piezoelectric nanogenerator(PENG)was reported for the first time.The monolayer MoSe_(2)-based PENG was fabricated by atmospheric pressure chemical vapor deposition techniques,which can generate a peak output of 35 mV and a power density of42 mW m^(-2).The flexible PENG integrated on polyethylene terephthalate(PET)substrate can harvest energy generated by different parts of human body and exhibit great application prospects in wearable devices.The electrospinned PVA/MXene nanofiber-based humidity sensor with flexible PET substrate under the driven of monolayer MoSe_(2) PENG,shows high response of~40,fast response/recovery time of 0.9/6.3 s,low hysteresis of 1.8%and excellent repeatability.The self-powered flexible humidity sensor yields the capability of detecting human skin moisture and ambient humidity.This work provides a pathway to explore the high-performance humidity sensor integrated with PENG for the self-powered flexible electronic devices.

Adaptive Walking of a Quadrupedal Robot Based on Layered Biological Reflexes

A multiple-legged robot is traditionally controlled by using its dynamic model.But the dynamic-model-based approach fails to acquire satisfactory performances when the robot faces rough terrains and unknown environments.Referring animals＇ neural control mechanisms,a control model is built for a quadruped robot walking adaptively.The basic rhythmic motion of the robot is controlled by a well-designed rhythmic motion controller（RMC） comprising a central pattern generator（CPG） for hip joints and a rhythmic coupler（RC） for knee joints.CPG and RC have relationships of motion-mapping and rhythmic couple.Multiple sensory-motor models,abstracted from the neural reflexes of a cat,are employed.These reflex models are organized and thus interact with the CPG in three layers,to meet different requirements of complexity and response time to the tasks.On the basis of the RMC and layered biological reflexes,a quadruped robot is constructed,which can clear obstacles and walk uphill and downhill autonomously,and make a turn voluntarily in uncertain environments,interacting with the environment in a way similar to that of an animal.The paper provides a biologically inspired architecture,with which a robot can walk adaptively in uncertain environments in a simple and effective way,and achieve better performances.

Inertia Match of a 3-RRR Reconfigurable Planar Parallel Manipulator

Inertia match of the parallel manipulator means the ratio of the inertial load of the parallel manipulator converted to each actuator shaft and the moment of inertia of the actuator is kept within a reasonable range. Currently there are many studies on parallel manipulators, but few mention inertia parameters and inertia match of parallel manipulators. This paper focuses on the inertia characteristics of the 3-RRR reconfigurable planar parallel manipulator. On the basis of the inverse dynamic formulations deduced with the principle of virtual work, the inertia matrix of the 3-RRR planar parallel manipulator in the actuator space is obtained in algebraic form. Then, by unifying the dimension and averaging diagonal elements of the inertia matrix, the equivalent inertia of the parallel manipulator, which is the inertial load of the parallel manipulator converted to each actuator shaft, is determined. By transforming the inertia problem of the 3-RRR parallel manipulator into that of the serial multi-bar manipulator, the practicality of the equivalent inertia deduced by inverse dynamics is demonstrated. According to the physical meaning of the inertia equation, the manipulator is divided in to three parts. Further analysis is carried out on the contribution of each part to the equivalent inertia and their distributions in the required workspace, revealing that the passive links cannot ignored in calculating the equivalent inertia of the parallel manipulator. Finally, the inertia match for the 3-RRR reconfigurable parallel manipulator under three configurations is accomplished, and reducers are selected. The equivalent inertia calculation and the inertial match results illustrate that the inertia math is a necessary step to the design of the parallel manipulator, and inertia parameters dramatically affect dynamic performances of parallel manipulators. Besides, the equivalent inertia and inertial match principles, proposed in the paper, can be widely applied in the dynamic analysis and servomotors selecting for the parallel manipulator.

Needle Steering for Robot-Assisted Insertion into Soft Tissue:A Survey

Needle insertion is a common surgical procedure used in diagnosis and treatment.The needle steering technologies make continuous developments in theoretical and practical aspects along with the in-depth research on needle insertion.It is necessary to summarize and analyze the existing results to promote the future development of theories and applications of needle insertion.Thus,a survey of the state of the art of research is presented on algorithms of needle steering techniques,the surgical robots and devices.Based on the analysis of the needle insertion procedure,the concept of needle steering is defined as a kinematics problem,which is to place the needle at the target and avoid the obstacles.The needle steering techniques,including the artificial potential field method and the nonholonomic model,are introduced to control the needles for improving the accuracy.Based on the quasi-static thinking,the virtual spring model and the cantilever-beam model are developed to calculate the amount of needle deflection and generate the needle path.The phantoms instead of the real tissue are used to verify the models mentioned in most of the experimentations.For the desired needle trajectories,the image-guided robotic devices and some novel needles are presented to achieve the needle steering.Finally,the challenges are provided involving the controllability of the long flexible needle and the properties of soft tissue.The results and investigations can be used for further study on the precision and accuracy of needle insertion.

Optimal Design of a Main Driving Mechanism for Servo Punch Press Based on Performance Atlases

The servomotor drive turret punch press is attracting more attentions and being developed more intensively due to the advantages of high speed,high accuracy,high flexibility,high productivity,low noise,cleaning and energy saving.To effectively improve the performance and lower the cost,it is necessary to develop new mechanisms and establish corresponding optimal design method with uniform performance indices.A new patented main driving mechanism and a new optimal design method are proposed.In the optimal design,the performance indices,i.e.,the local motion/force transmission indices ITI,OTI,good transmission workspace good transmission workspace(GTW) and the global transmission indices GTIs are defined.The non-dimensional normalization method is used to get all feasible solutions in dimensional synthesis.Thereafter,the performance atlases,which can present all possible design solutions,are depicted.As a result,the feasible solution of the mechanism with good motion/force transmission performance is obtained.And the solution can be flexibly adjusted by designer according to the practical design requirements.The proposed mechanism is original,and the presented design method provides a feasible solution to the optimal design of the main driving mechanism for servo punch press.

Dynamic Feedforward Control of a Novel 3-PSP 3-DOF Parallel Manipulator

Parallel manipulators with less than six degrees of freedom （DOF） have been increasingly used in high-speed hybrid machine tools. The structural features of parallel manipulators are dynamic, a characteristic that is particularly significant when these manipulators are used in high-speed machine tools. However, normal kinematic control method cannot satisfy the requirements of the control system. Many researchers use model-based dynamic control methods, such as the dynamic feedforward control method. However, these methods are rarely used in hybrid machine tools because of the complex dynamic model of the parallel manipulator. In order to study the dynamic control method of parallel manipulators, the dynamic feedforward control method is used in the dynamic control system of a 3-PSP （prismatic-spherical-prismatic） 3-DOF spatial parallel manipulator used as a spindle head in a high-speed hybrid machine tool. Using kinematic analysis as basis and the Newton-Euler method, we derive the dynamic model of the parallel manipulator. Furthermore, a model-based dynamic feedforward control system consisting of both kinematic control and dynamic control subsystems is established. The dynamic control subsystem consists of two modules. One is used to eliminate the influence of the dynamic characteristics of high-speed movement, and the other is used to eliminate the dynamic disturbances in the milling process. Finally, the simulation model of the dynamic feedforward control system of the 3-PSP parallel manipulator is constructed in Matlab/Simulink. The simulations of the control system eliminating the influence of the dynamic characteristics and dynamic disturbances are conducted. A comparative study between the simulations and the normal kinematic control method is also presented.The simulations prove that the dynamic feedforward control method effectively eliminates the influence of the dynamic disturbances and dynamic characteristics of the parallel manipulator on high-speed machine tools, and significantly improves the trajectory accuracy. This is the first attempt to introduce the dynamic feedfordward control method into the 3-PSP spatial parallel manipulator whose dynamic model is complex and provides a study basis for the real-time dynamic control of the high-speed hybrid machine tools.

Application of spherical Ni(OH)_2/CNTs composite electrode in asymmetric supercapacitor

The composite electrodes consisting of carbon nanotubes and spherical Ni(OH)2 are developed by mixing nickel hydroxide, carbon nanotubes and carbonyl nickel powder together in 8:1:1 ratio. A maximum capacitance of 311 F/g is obtained for an electrode prepared with the precipitation process. In order to enhance energy density, an asymmetric type pseudo-capacitor/electric double layer capacitor is considered and its electrochemical properties are investigated. Values for the specific energy and maximum specific power of 25.8 W·h/kg and 2.8 kW/kg, respectively, are demonstrated for a cell voltage between 0 and 1.6 V. By using the modified cathode of a Ni(OH)2/carbon nanotube composite electrode, the asymmetric supercapacitor exhibits high energy density and stable power characteristics.

Modeling and Analysis of a Micromotor with an Electrostatically Levitated Rotor

The modeling and evaluation of a prototype rotary micromotor where the annular rotor is supported electrostatically in five degrees of freedom is presented in order to study the behavior of this levitated micromotor and further optimize the device geometry. The analytical torque model is obtained based on the principle of a planar variable-capacitance electrostatic motor while the viscous damping caused by air film between the stator and rotor is derived using laminar Couette flow model. Simulation results of the closed-loop drive motor, based on the developed dynamic model after eliminating mechanical friction torque via electrostatic suspension, are presented. The effects of the high-voltage drive, required for rotation of the rotor, on overload capacity and suspension stiffness of the electrostatic bearing system are also analytically evaluated in an effort to determine allowable drive voltage and attainable rotor speed in operation. The analytical results show that maximum speed of the micromotor is limited mainly by viscous drag torque and stiffness of the bearing system. Therefore, it is expected to operate the device in vacuum so as to increase the rotor speed significantly, especially for those electrostatically levitated micromotors to be used as an angular rate micro-gyroscope.

Etching‐assisted femtosecond laser modification of hard materials

With high hardness, high thermal and chemical stability and excellent optical performance, hard materials exhibit great potential applications in various fields, especially in harsh conditions. Femtosecond laser ablation has the capability to fabricate three-dimensional micro/nanostructures in hard materials. However, the low efficiency, low precision and high surface roughness are the main stumbling blocks for femtosecond laser processing of hard materials. So far, etching- assisted femtosecond laser modification has demonstrated to be the efficient strategy to solve the above problems when processing hard materials, including wet etching and dry etching. In this review, femtosecond laser modification that would influence the etching selectivity is introduced. The fundamental and recent applications of the two kinds of etching assisted femtosecond laser modification technologies are summarized. In addition, the challenges and application prospects of these technologies are discussed.

First Evaluation and Frequency Measurement of the Strontium Optical Lattice Clock at NIM

An optical lattice clock based on 87Sr is built at National Institute of Metrology （NIM） of China. The systematic frequency shifts of the clock are evaluated with a total uncertainty of 2.3×10-16. To measure its absolute frequency with respect to NIM＇s cesium fountain clock NIM5, the frequency of a flywheel H-maser of NIM5 is transferred to the Sr laboratory through a 50-kin-long fiber. reference frequency of this H-maser, is used for the optical this Sr clock is measured to be 429228004229873.7（1.4）Hz. A fiber optical frequency comb, phase-locked to the frequency measurement. The absolute frequency of

High Efficient Methods of Content-based 3D Model Retrieval

Content-based 3D model retrieval is of great help to facilitate the reuse of existing designs and to inspire designers during conceptual design. However, there is still a gap to apply it in industry due to the low time efficiency. This paper presents two new methods with high efficiency to build a Content-based 3D model retrieval system. First, an improvement is made on the ＂Shape Distribution （D2）＂ algorithm, and a new algorithm named ＂Quick D2＂ is proposed. Four sample 3D mechanical models are used in an experiment to compare the time cost of the two algorithms. The result indicates that the time cost of Quick D2 is much lower than that of D2, while the descriptors extracted by the two algorithms are almost the same. Second, an expandable 3D model repository index method with high performance, namely, RBK index, is presented. On the basis of RBK index, the search space is pruned effectively during the search process, leading to a speed up of the whole system. The factors that influence the values of the key parameters of RBK index are discussed and an experimental method to find the optimal values of the key parameters is given. Finally, ＂3D Searcher＂, a content-based 3D model retrieval system is developed. By using the methods proposed, the time cost for the system to respond one query online is reduced by 75% on average. The system has been implemented in a manufacturing enterprise, and practical query examples during a case of the automobile rear axle design are also shown. The research method presented shows a new research perspective and can effectively improve the content-based 3D model retrieval efficiency.

Structural Deformation Monitoring of Flight Vehicles Based on Optical Fiber Sensing Technology:A Review and Future Perspectives

Structural deformation monitoring of flight vehicles based on optical fiber sensing(OFS)technology has been a focus of research in the field of aerospace.After nearly 30 years of research and development,Chinese and international researchers have made significant advances in the areas of theory and methods,technology and systems,and ground experiments and flight tests.These advances have led to the development of OFS technology from the laboratory research stage to the engineering application stage.However,a few problems encountered in practical applications limit the wider application and further development of this technology,and thus urgently require solutions.This paper reviews the history of research on the deformation monitoring of flight vehicles.It examines various aspects of OFS-based deformation monitoring including the main varieties of OFS technology,technical advantages and disadvantages,suitability in aerospace applications,deformation reconstruction algorithms,and typical applications.This paper points out the key unresolved problems and the main evolution paradigms of engineering applications.It further discusses future development directions from the perspectives of an evolution paradigm,standardization,new materials,intelligentization,and collaboration.

Dynamic Manipulability and Optimization of a Two DOF Parallel Mechanism

The dynamic dexterity is an important issue for manipulator design, some indices were proposed for analyzing dynamic dexterity, but they can evaluate the dynamic performance just at one pose in the workspaee of the manipulator, and can＇t be applied to dynamic design expediently. Much work has been done in the kinematic optimization, but the work in the dynamic optimization is much less. A global dynamic condition number index is proposed and applied to the dynamic optimization design the parallel manipulator. This paper deals with the dynamic manipulability and dynamic optimization of a two degree-of-freedom （DOF） parallel manipulator. The particular velocity and particular angular velocity matrices of each moving part about the part＇s pivot point are derived fi＇om the kinematic formulation of the manipulator, and the inertial force and inertial movement are obtained utilizing Newton-Euler formulation, then the inverse dynamic model of the parallel manipulator is proposed based on the virtual work principle. The general inertial ellipsoid and dynamic manipulability ellipsoid are applied to evaluate the dynamic performance of the manipulator, a global dynamic condition number index based on the condition number of general inertial matrix in the workspace is proposed, and then the link lengths of the manipulator is redesigned to optimize the dynamic manipulability by this index. The dynamic manipulability of the origin mechanism and the optimized mechanism are compared, the result shows that the optimized one is much better. The global dynamic condition number index has good effect in evaluating the dynamic dexterity of the whole workspace, and is efficient in the dynamic optimal design of the parallel manipulator.