The design and performance analysis of networked control systems with random network delay in the forward channel is proposed, which are described in a state-space form. A new control scheme is used to overcome the ef...The design and performance analysis of networked control systems with random network delay in the forward channel is proposed, which are described in a state-space form. A new control scheme is used to overcome the effects of network transmission delay, which is termed networked predictive control （NPC）. Furthermore, three different ways to choose control input are discussed and the performances are analyzed, respectively. Both real-time simulations and practical experiments show the effectiveness of the control scheme.展开更多
Not so much had been talked about equilibrium in control area. On the basis of the phenomenon of balance, the concept of control-equilibrium and control-equilibrium of a control system is proposed. According to this t...Not so much had been talked about equilibrium in control area. On the basis of the phenomenon of balance, the concept of control-equilibrium and control-equilibrium of a control system is proposed. According to this theory, a perfect control method should not only guarantee stability of the system, but also ensure the control-equilibrium of the system. To achieve the control-equilibrium, feed-forward control is required.展开更多
To improve the robustness of high-precision servo systems, quantitative feedback theory （QFT） which aims to achieve a desired robust design over a specified region of plant uncertainty is proposed. The robust design...To improve the robustness of high-precision servo systems, quantitative feedback theory （QFT） which aims to achieve a desired robust design over a specified region of plant uncertainty is proposed. The robust design problem can be solved using QFT but it fails to guarantee a high precision tracking. This problem is solved by a robust digital QFT control scheme based on zero phase error （ZPE） feed forward compensation. This scheme consists of two parts： a QFT controller in the closed-loop system and a ZPE feed-forward compensator. Digital QFT controller is designed to overcome the uncertainties in the system. Digital ZPE feed forward controller is used to improve the tracking precision. Simulation and real-time examples for flight simulator servo system indicate that this control scheme can guarantee both high robust performance and high position tracking precision.展开更多
Based on a new linear, continuous and bounded operator (PGOPO), a more effective approach and optimal control algorithm than by the block-pulse functions and Walsh functions to design the linear servomechanism of time...Based on a new linear, continuous and bounded operator (PGOPO), a more effective approach and optimal control algorithm than by the block-pulse functions and Walsh functions to design the linear servomechanism of time-varying systems with time-delay is proposed in the paper. By means of the operator, the differential equation is transferred to a more explicit algebraic form which is much easier than the numerical integration of nonlinear TPBVP derived from Pantryagin's maximum principle method. Furthermore, the method is established strictly based on the theory of convergence in the mean square and it is convenient and simple in computation. So the method can be applied to industry control and aeronautics and astronautics field which is frequently mixed with time varying and time delay. Some illustrative numerical examples are interpreted to support the technique.展开更多
The cooperative mechanism is one main issue in the decentralized supply chain system, especially in an asymmetric information structure. We analyze the non-cooperative game behavior of a 2-echelon distribution supply ...The cooperative mechanism is one main issue in the decentralized supply chain system, especially in an asymmetric information structure. We analyze the non-cooperative game behavior of a 2-echelon distribution supply chain, compare the results with the system optimal solution, and give the supplier dominated cooperative mechanisms. We also analyze the validity of our contract under the asymmetric retailers' holding cost information and give some useful conclusions.展开更多
To solve the coupling effect of multiconductor transmission lines excited by external electromagnetic wave, the modified method of characteristics is proposed. The modified method of characteristics which can compute ...To solve the coupling effect of multiconductor transmission lines excited by external electromagnetic wave, the modified method of characteristics is proposed. The modified method of characteristics which can compute the terminal induced voltages excited by the external electromagnetic wave when the terminal networks or intereonnection networks contain the dynamic elements is introduced. The simulation results indicate that the modified method can analyze the terminal induced voltages when the terminal networks or the interconnection networks contain the dynamic elements excited by the external electromagnetic wave. And the results are compared with the results acquired by FDTD method, the two results are completely same. So one effective modified method is implemented to compute the transmission lines.展开更多
In order to improve the filter accuracy for the nonlinear error model of strapdown inertial navigation system （SINS） alignment, Unscented Kalman Filter （UKF） is presented for simulation with stationary base and mo...In order to improve the filter accuracy for the nonlinear error model of strapdown inertial navigation system （SINS） alignment, Unscented Kalman Filter （UKF） is presented for simulation with stationary base and moving base of SINS alignment. Simulation results show the superior performance of this approach when compared with classical suboptimal techniques such as extended Kalman filter in cases of large initial misalignment. The UKF has good performance in case of small initial misalignment.展开更多
A method of fuzzy identification based on a new objective function is proposed. The method could deal with the issue that input variables of a system have an effect on the input space while output variables of the sys...A method of fuzzy identification based on a new objective function is proposed. The method could deal with the issue that input variables of a system have an effect on the input space while output variables of the system do not exert an influence on the input space in the proposed objective functions of fuzzy clustering. The method could simultaneously solve the problems about structure identification and parameter estimation; thus it makes the fuzzy model become optimal. Simulation example demonstrates that the method could identify non linear systems and obviously improve modeling accuracy.展开更多
BP is a commonly used neural network training method, which has some disadvantages, such as local minima, sensitivity of initial value of weights, total dependence on gradient information. This paper presents some met...BP is a commonly used neural network training method, which has some disadvantages, such as local minima, sensitivity of initial value of weights, total dependence on gradient information. This paper presents some methods to train a neural network, including standard particle swarm optimizer （PSO）, guaranteed convergence particle swarm optimizer （GCPSO）, an improved PSO algorithm, and GCPSO-BP, an algorithm combined GCPSO with BP. The simulation results demonstrate the effectiveness of the three algorithms for neural network training.展开更多
In neutral point indirectly grounded systems, phase-to-ground fault is putting new demands on fault diagnosis technology. Information fusion is applied to detect the phase-to-ground fault, which integrates several sou...In neutral point indirectly grounded systems, phase-to-ground fault is putting new demands on fault diagnosis technology. Information fusion is applied to detect the phase-to-ground fault, which integrates several sources of information, including line current, line voltage, zero sequence current and voltage, and quintic harmonic wave component. This method is testified through the simulation of Matlab. Simulation results show that the precision and reliability of the detection has been greatly increased.展开更多
基金supported partly by the National Natural Science Foundation of China(60504020)the Program for New Century Excellent Talents in University(NCET-08-0047)the Excellent Young Scholars Research Fund of Beijing Institute of Technology(2008YS0104).
文摘The design and performance analysis of networked control systems with random network delay in the forward channel is proposed, which are described in a state-space form. A new control scheme is used to overcome the effects of network transmission delay, which is termed networked predictive control （NPC）. Furthermore, three different ways to choose control input are discussed and the performances are analyzed, respectively. Both real-time simulations and practical experiments show the effectiveness of the control scheme.
文摘Not so much had been talked about equilibrium in control area. On the basis of the phenomenon of balance, the concept of control-equilibrium and control-equilibrium of a control system is proposed. According to this theory, a perfect control method should not only guarantee stability of the system, but also ensure the control-equilibrium of the system. To achieve the control-equilibrium, feed-forward control is required.
基金This project was supported by the Aeronautics Foundation of China (00E51022).
文摘To improve the robustness of high-precision servo systems, quantitative feedback theory （QFT） which aims to achieve a desired robust design over a specified region of plant uncertainty is proposed. The robust design problem can be solved using QFT but it fails to guarantee a high precision tracking. This problem is solved by a robust digital QFT control scheme based on zero phase error （ZPE） feed forward compensation. This scheme consists of two parts： a QFT controller in the closed-loop system and a ZPE feed-forward compensator. Digital QFT controller is designed to overcome the uncertainties in the system. Digital ZPE feed forward controller is used to improve the tracking precision. Simulation and real-time examples for flight simulator servo system indicate that this control scheme can guarantee both high robust performance and high position tracking precision.
基金National Natural Science Foundation of China(69934010)
文摘Based on a new linear, continuous and bounded operator (PGOPO), a more effective approach and optimal control algorithm than by the block-pulse functions and Walsh functions to design the linear servomechanism of time-varying systems with time-delay is proposed in the paper. By means of the operator, the differential equation is transferred to a more explicit algebraic form which is much easier than the numerical integration of nonlinear TPBVP derived from Pantryagin's maximum principle method. Furthermore, the method is established strictly based on the theory of convergence in the mean square and it is convenient and simple in computation. So the method can be applied to industry control and aeronautics and astronautics field which is frequently mixed with time varying and time delay. Some illustrative numerical examples are interpreted to support the technique.
基金This project was supported by the National Science Foundation of China(7017015)The Teaching and Research Award Fund for Outstanding Young Teachers in Higher Education Institutions of MOEThe Excellent Young Teachers Fund of MOE and the Project of Suppor
文摘The cooperative mechanism is one main issue in the decentralized supply chain system, especially in an asymmetric information structure. We analyze the non-cooperative game behavior of a 2-echelon distribution supply chain, compare the results with the system optimal solution, and give the supplier dominated cooperative mechanisms. We also analyze the validity of our contract under the asymmetric retailers' holding cost information and give some useful conclusions.
文摘To solve the coupling effect of multiconductor transmission lines excited by external electromagnetic wave, the modified method of characteristics is proposed. The modified method of characteristics which can compute the terminal induced voltages excited by the external electromagnetic wave when the terminal networks or intereonnection networks contain the dynamic elements is introduced. The simulation results indicate that the modified method can analyze the terminal induced voltages when the terminal networks or the interconnection networks contain the dynamic elements excited by the external electromagnetic wave. And the results are compared with the results acquired by FDTD method, the two results are completely same. So one effective modified method is implemented to compute the transmission lines.
文摘In order to improve the filter accuracy for the nonlinear error model of strapdown inertial navigation system （SINS） alignment, Unscented Kalman Filter （UKF） is presented for simulation with stationary base and moving base of SINS alignment. Simulation results show the superior performance of this approach when compared with classical suboptimal techniques such as extended Kalman filter in cases of large initial misalignment. The UKF has good performance in case of small initial misalignment.
文摘A method of fuzzy identification based on a new objective function is proposed. The method could deal with the issue that input variables of a system have an effect on the input space while output variables of the system do not exert an influence on the input space in the proposed objective functions of fuzzy clustering. The method could simultaneously solve the problems about structure identification and parameter estimation; thus it makes the fuzzy model become optimal. Simulation example demonstrates that the method could identify non linear systems and obviously improve modeling accuracy.
文摘BP is a commonly used neural network training method, which has some disadvantages, such as local minima, sensitivity of initial value of weights, total dependence on gradient information. This paper presents some methods to train a neural network, including standard particle swarm optimizer （PSO）, guaranteed convergence particle swarm optimizer （GCPSO）, an improved PSO algorithm, and GCPSO-BP, an algorithm combined GCPSO with BP. The simulation results demonstrate the effectiveness of the three algorithms for neural network training.
文摘In neutral point indirectly grounded systems, phase-to-ground fault is putting new demands on fault diagnosis technology. Information fusion is applied to detect the phase-to-ground fault, which integrates several sources of information, including line current, line voltage, zero sequence current and voltage, and quintic harmonic wave component. This method is testified through the simulation of Matlab. Simulation results show that the precision and reliability of the detection has been greatly increased.
