Innovative Solutions for High-Performance Silicon Anodes in Lithium-Ion Batteries:Overcoming Challenges and Real-World Applications

Silicon(Si)has emerged as a potent anode material for lithium-ion batteries(LIBs),but faces challenges like low electrical conductivity and significant volume changes during lithiation/delithiation,leading to material pulverization and capacity degradation.Recent research on nanostructured Si aims to mitigate volume expansion and enhance electrochemical performance,yet still grapples with issues like pulverization,unstable solid electrolyte interface(SEI)growth,and interparticle resistance.This review delves into innovative strategies for optimizing Si anodes’electrochemical performance via structural engineering,focusing on the synthesis of Si/C composites,engineering multidimensional nanostructures,and applying non-carbonaceous coatings.Forming a stable SEI is vital to prevent electrolyte decomposition and enhance Li^(+)transport,thereby stabilizing the Si anode interface and boosting cycling Coulombic efficiency.We also examine groundbreaking advancements such as self-healing polymers and advanced prelithiation methods to improve initial Coulombic efficiency and combat capacity loss.Our review uniquely provides a detailed examination of these strategies in real-world applications,moving beyond theoretical discussions.It offers a critical analysis of these approaches in terms of performance enhancement,scalability,and commercial feasibility.In conclusion,this review presents a comprehensive view and a forward-looking perspective on designing robust,high-performance Si-based anodes the next generation of LIBs.

Phosphotungstic acid ionic liquid for efficient photocatalytic desulfurization:Synthesis,application and mechanism

An efficient mass transfer process is a critical factor for regulating catalytic activity in a photocatalytic desulfurization system.Herein,a phosphotungstic acid(HPW)active center is successfully composited with a quaternary ammonium phosphotungstate-based hexadecyltrimethylammonium chloride ionic liquid(CTAC-HPW)by the ion exchange method for the photocatalytic oxidative desulfurization of dibenzothiophene sulfide.The keggin structure of HPW and highly mass transfer performance of organic cations synergistically enhanced the photocatalytic activity towards the effective convertion of dibenzothiophene(DBT)with the excitation of visible light.The deep desulfurization(<10 mg·kg^(-1))is attained within 30 min,and well stability is demonstrated within 25 cycles.Moreover,the CTAC-HPW photocatalyst projects well selectivity to interference from coexisting compounds such as olefins and aromatic hydrocarbons and universality of dibenzothiophenes,for example,4-methyldibenzothiophene(4-MDBT)and 4,6-dimethyldibenzothiophene(4,6-DMDBT).Ultimately,a possible photocatalytic desulfurization mechanism is proposed according to the Gaschromatography-mass spectrometry(GC-MS),proving that the final product is the corresponding sulfone.The trapping experiment and electron spin resonance(ESR)analysis confirmed that h^(+)and,COOH played critical roles in the oxidation process.The work offers a practicable strategy for efficiently converting DBT to DBTO_(2) with added value.

Cu-Based Materials for Enhanced C_(2+) Product Selectivity in Photo-/Electro-Catalytic CO_(2) Reduction: Challenges and Prospects

Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for catalytic reduction of CO_(2), Cu-based materials are highly advantageous owing to their widespread availability, cost-effectiveness, and environmental sustainability. Furthermore, Cu-based materials demonstrate interesting abilities in the adsorption and activation of carbon dioxide, allowing the formation of C_(2+) compounds through C–C coupling process. Herein, the basic principles of photocatalytic CO_(2) reduction reactions(PCO_(2)RR) and electrocatalytic CO_(2) reduction reaction(ECO_(2)RR) and the pathways for the generation C_(2+) products are introduced. This review categorizes Cu-based materials into different groups including Cu metal, Cu oxides, Cu alloys, and Cu SACs, Cu heterojunctions based on their catalytic applications. The relationship between the Cu surfaces and their efficiency in both PCO_(2)RR and ECO_(2)RR is emphasized. Through a review of recent studies on PCO_(2)RR and ECO_(2)RR using Cu-based catalysts, the focus is on understanding the underlying reasons for the enhanced selectivity toward C_(2+) products. Finally, the opportunities and challenges associated with Cu-based materials in the CO_(2) catalytic reduction applications are presented, along with research directions that can guide for the design of highly active and selective Cu-based materials for CO_(2) reduction processes in the future.

Synergistic catalysis of the N-hydroxyphthalimide on flower-like bimetallic metal-organic frameworks for boosting oxidative desulfurization

Synergic catalytic effect between active sites and supports greatly determines the catalytic activity for the aerobic oxidative desulfurization of fuel oils.In this work,Ni-doped Co-based bimetallic metal-organic framework(CoNi-MOF)is fabricated to disperse N-hydroxyphthalimide(NHPI),in which the whole catalyst provides plentiful synergic catalytic effect to improve the performance of oxidative desulfurization(ODS).As a bimetallic MOF,the second metal Ni doping results in the flower-like morphology and the modification of electronic properties,which ensure the exposure of NHPI and strengthen the synergistic effect of the overall catalyst.Compared with the monometallic Co-MOF and naked NHPI,the NHPI@CoNi-MOF triggers the efficient activation of molecular oxygen and improves the ODS performance without an initiator.The sulfur removal of dibenzothiophene-based model oil reaches 96.4%over the NHPI@CoNi-MOF catalyst in 8 h of reaction.Furthermore,the catalytic product of this aerobic ODS reaction is sulfone,which is adsorbed on the catalyst surface due to the difference in polarity.This work provides new insight and strategy for the design of a strong synergic catalytic effect between NHPI and bimetallic supports toward high-activity aerobic ODS materials.

Advanced oxidation via the synergy of C-defective/C-O band modified ultrathin porous g-C_(3)N_(4)and PMS for efficient photothermal degradation of bisphenol pollutants and lignin derivatives

This work uses thermal polymerization of urea nitrate,oxyacetic acid and urea as the raw material to prepare ultra-thin porous carbon nitride with carbon defects and C-O band(OA-UN-CN).Density functional theory(DFT)calculations showed OA-UN-CN had narrower band gap,faster electron transport and a new internal construction electric field.Additionally,the prepared OA-UN-CN significantly enhanced photocatalytic activation of peroxymonosulfate(PMS)due to enhanced light absorption performance and faster electron overflow.As the result,the OA-UN-CN/PMS could entirely degrade bisphenol A(BPA)within 30 min,where the photodegradation rate was 81.8 and 7.9 times higher than that of g-C_(3)N_(4)and OA-UN-CN,respectively.Beyond,the OA-UN-CN/PMS could likewise degrade other bisphenol pollutants and sodium lignosulfonate efficiently.We suggested possible photocatalytic degradation pathways accordingly and explored the toxicity of its degradation products.This work provides a new idea on the development of advanced photocatalytic oxidation processes for the treatment of bisphenol pollutants and lignin derivatives,via a metal-free photothermal-catalyst.

Engineering hydrophobic protective layers on zinc anodes for enhanced performance in aqueous zinc-ion batteries

Aqueous zinc-ion batteries possess substantial potential for energy storage applications;however,they are hampered by challenges such as dendrite formation and uncontrolled side reactions occurring at the zinc anode.In our investigation,we sought to mitigate these issues through the utilization of in situ zinc complex formation reactions to engineer hydrophobic protective layers on the zinc anode surface.These robust interfacial layers serve as effective barriers,isolating the zinc anode from the electrolyte and active water molecules and thereby preventing hydrogen evolution and the generation of undesirable byproducts.Additionally,the presence of numerous zincophilic sites within these protective layers facilitates uniform zinc deposition while concurrently inhibiting dendrite growth.Through comprehensive evaluation of functional anodes featuring diverse functional groups and alkyl chain lengths,we meticulously scrutinized the underlying mechanisms influencing performance variations.This analysis involved precise modulation of interfacial hydrophobicity,rapid Zn^(2+)ion transport,and ordered deposition of Zn^(2+)ions.Notably,the optimized anode,fabricated with octadecylphosphate(OPA),demonstrated exceptional performance characteristics.The Zn//Zn symmetric cell exhibited remarkable longevity,exceeding 4000 h under a current density of 2 mA cm^(-2)and a capacity density of 2 mA h cm^(-2),Furthermore,when integrated with a VOH cathode,the complete cell exhibited superior capacity retention compared to anodes modified with alternative organic molecules.

Strain‑Induced Surface Interface Dual Polarization Constructs PML‑Cu/Bi_(12)O_(17)Br_(2) High‑Density Active Sites for CO_(2) Photoreduction

The insufficient active sites and slow interfacial charge trans-fer of photocatalysts restrict the efficiency of CO_(2) photoreduction.The synchronized modulation of the above key issues is demanding and chal-lenging.Herein,strain-induced strategy is developed to construct the Bi–O-bonded interface in Cu porphyrin-based monoatomic layer(PML-Cu)and Bi_(12)O_(17)Br_(2)(BOB),which triggers the surface interface dual polarization of PML-Cu/BOB(PBOB).In this multi-step polarization,the built-in electric field formed between the interfaces induces the electron transfer from con-duction band(CB)of BOB to CB of PML-Cu and suppresses its reverse migration.Moreover,the surface polarization of PML-Cu further promotes the electron converge in Cu atoms.The introduction of PML-Cu endows a high density of dispersed Cu active sites on the surface of PBOB,significantly promoting the adsorption and activation of CO_(2) and CO desorption.The conversion rate of CO_(2) photoreduction to CO for PBOB can reach 584.3μmol g-1,which is 7.83 times higher than BOB and 20.01 times than PML-Cu.This work offers valuable insights into multi-step polarization regulation and active site design for catalysts.

Gold/monolayer graphitic carbon nitride plasmonic photocatalyst for ultrafast electron transfer in solar-to-hydrogen energy conversion

Gold(Au)plasmonic nanoparticles were grown evenly on monolayer graphitic carbon nitride(g‐C3N4)nanosheets via a facile oil‐bath method.The photocatalytic activity of the Au/monolayer g‐C3N4 composites under visible light was evaluated by photocatalytic hydrogen evolution and environmental treatment.All of the Au/monolayer g‐C3N4 composites showed better photocatalytic performance than that of monolayer g‐C3N4 and the 1%Au/monolayer g‐C3N4 composite displayed the highest photocatalytic hydrogen evolution rate of the samples.The remarkable photocatalytic activity was attributed largely to the successful introduction of Au plasmonic nanoparticles,which led to the surface plasmon resonance(SPR)effect.The SPR effect enhanced the efficiency of light harvesting and induced an efficient hot electron transfer process.The hot electrons were injected from the Au plasmonic nanoparticles into the conduction band of monolayer g‐C3N4.Thus,the Au/monolayer g‐C3N4 composites possessed higher migration and separation efficiencies and lower recombination probability of photogenerated electron‐hole pairs than those of monolayer g‐C3N4.A photocatalytic mechanism for the composites was also proposed.

Active phase morphology engineering of NiMo/Al2O3 through La introduction for boosting hydrodesulfurization of 4,6-DMDBT

Herein,we designed and constructed a mesoporous LaAlOx via a solvent evaporation induced self-assembly protocol.The structure and physicochemical property of the corresponding NiMo supported catalyst was analyzed by a set of characterizations,and its catalytic activity was investigated for hydrodesulfurization(HDS)of 4,6-dimethyldibenzothiophene.It has confirmed that the incorporation of La profoundly facilitate the generation of“Type II”NiMoS phase by weakening the interaction of Mo–O–Al leakage and promoting the sulfidation of both Ni and Mo oxides as well as changing the morphology of Ni promoted MoS2 slabs,thereafter boosting the HDS performance substantially.The finding here may contribute to the fundamental understanding of structure-activity in ultra-deep desulfurization and inspire the advancement of highly-efficient HDS catalyst in future.

Boosting Lean Electrolyte Lithium-Sulfur Battery Performance with Transition Metals: A Comprehensive Review

Lithium–sulfur(Li–S) batteries have received widespread attention, and lean electrolyte Li–S batteries have attracted additional interest because of their higher energy densities. This review systematically analyzes the effect of the electrolyte-to-sulfur(E/S) ratios on battery energy density and the challenges for sulfur reduction reactions(SRR) under lean electrolyte conditions. Accordingly, we review the use of various polar transition metal sulfur hosts as corresponding solutions to facilitate SRR kinetics at low E/S ratios(< 10 μL mg~(-1)), and the strengths and limitations of different transition metal compounds are presented and discussed from a fundamental perspective. Subsequently, three promising strategies for sulfur hosts that act as anchors and catalysts are proposed to boost lean electrolyte Li–S battery performance. Finally, an outlook is provided to guide future research on high energy density Li–S batteries.

Regulated electronic structure and improved electrocatalytic performances of S-doped FeWO4 for rechargeable zinc-air batteries

The exploration of active and long-lived oxygen reduction reaction(ORR)catalysts for the commercialization of zinc-air batteries are of immense significance but challenging.Herein,the sulfur doped FeWO_(4)embedded in the multi-dimensional nitrogen-doped carbon structure(S-FeWO_(4)/NC)was successfully synthesized.The doped S atoms optimized the charge distribution in FeWO_(4)and enhanced the intrinsic activity.At the same time,S doping accelerated the formation of reaction intermediates during the adsorption reduction of O_(2)on the surface of S-FeWO_(4)/NC.Accordingly,the S-FeWO_(4)/NC catalyst showed more positive half-wave potential(0.85 V)and better stability than that of the FeWO_(4)/NC catalyst.Furthermore,the S-FeWO_(4)/NC-based zinc-air battery exhibited considerable power density of 150.3m W cm^(-2),high specific capacity of 912.7 m A h g^(-1),and prominent cycle stability up to 220 h.This work provides an assistance to the development of cheap and efficient tungsten-based oxygen reduction catalysts and the promotion of its application in the zinc-air battery.

One-pot in-situ synthesis of coralloid supported VO_(2)catalyst for intensified aerobic oxidative desulfurization

A coralloid 3D g-C_(3)N_(4)supported VO_(2)catalyst was successfully synthesized in-situ by one-pot method,avoiding the agglomeration of VO_(2)during the reaction.The morphological and compositional information of the supported catalyst were investigated detailedly.30%VO_(2)/3D g-C_(3)N_(4)revealed excellent catalytic activity in aerobic oxidative desulfurization,the oxidative of dibenzothiophene(DBT),4-methyldibenzothiophene(4-MDBT)and 4,6-dimethyldibenzothiophene(4,6-DMDBT)reached 98.6%,99%and 99.4%,respectively,under the same mild conditions.The recycling performance and the mechanism on the oxidative of DBT were studied as well.

Variable valence Mo^(5+)/Mo^(6+)ionic bridge in hollow spherical g-C_(3)N_(4)/Bi_(2)MoO_(6) catalysts for promoting selective visible light-driven CO_(2)photoreduction into CO

Herein,the catalysts of ultrathin g-C_(3)N_(4)surface-modified hollow spherical Bi2MoO6(g-C_(3)N_(4)/Bi2MoO6,abbreviated as CN/BMO)were fabricated by the co-solvothermal method.The variable valence Mo^(5+)/Mo^(6+)ionic bridge in CN/BMO catalysts can boost the rapid transfer of photogenerated electrons from Bi2MoO6to g-C_(3)N_(4).And the synergy effect of g-C_(3)N_(4)and Bi2MoO6components remarkably enhance CO_(2)adsorption capability.CN/BMO-2 catalyst has the best performances for visible light-driven CO_(2)reduction compared with single Bi2MoO6and g-C_(3)N_(4),i.e.,its amount and selectivity of CO product are 139.50μmol g-1and 96.88%for 9 h,respectively.Based on the results of characterizations and density functional theory calculation,the photocatalytic mechanism for CO_(2)reduction is proposed.The high-efficient separation efficiency of photogenerated electron-hole pairs,induced by variable valence Mo^(5+)/Mo^(6+)ionic bridge,can boost the rate-limiting steps(COOH*-to-CO*and CO*desorption)of selective visible light-driven CO_(2)conversion into CO.It inspires the establishment of efficient photocatalysts for CO_(2)conversion.

Strategies for Sustainable Production of Hydrogen Peroxide via Oxygen Reduction Reaction:From Catalyst Design to Device Setup

An environmentally benign,sustainable,and cost-effective supply of H_(2)O_(2)as a rapidly expanding consumption raw material is highly desired for chemical industries,medical treatment,and household disinfection.The electrocatalytic production route via electrochemical oxygen reduction reaction(ORR)offers a sustainable avenue for the onsite production of H_(2)O_(2)from O2 and H2O.The most crucial and innovative part of such technology lies in the availability of suitable electrocatalysts that promote two-electron(2e^(–))ORR.In recent years,tremendous progress has been achieved in designing efficient,robust,and cost-effective catalyst materials,including noble metals and their alloys,metalfree carbon-based materials,single-atom catalysts,and molecular catalysts.Meanwhile,innovative cell designs have significantly advanced electrochemical applications at the industrial level.This review summarizes fundamental basics and recent advances in H_(2)O_(2)production via 2e^(–)-ORR,including catalyst design,mechanistic explorations,theoretical computations,experimental evaluations,and electrochemical cell designs.Perspectives on addressing remaining challenges are also presented with an emphasis on the large-scale synthesis of H_(2)O_(2)via the electrochemical route.

Recent advances in graphitic carbon nitride-based photocatalysts for solar-driven hydrogen production

Due to the abundance and sustainability of solar energy,converting it into chemical energy to obtain clean energy presents an ideal solution for addressing environmental pollution and energy shortages stemming from the extensive combustion of fossil fuels.In recent years,hydrogen energy has emerged on the stage of history as the most promising clean energy carrier of the 21st century.Among the current methods of producing hydrogen,photocatalytic hydrogen production technology,as a zero-carbon approach to producing high calorific value and pollution-free hydrogen energy,has attracted much attention since its discovery.As the core of photocatalysis technology,semiconductor photocatalysts are always the research hotspots.Among them,graphite-phase carbon nitride(g-C_(3)N_(4)),an organic semiconductor material composed of only C and N elements,possesses physicochemical properties incomparable to those of traditional inorganic semiconductor materials,including suitable energy band positions,easy structural regulation,inexpensive raw materials and abundant reserves,simple preparation,high thermal/mechanical/chemical stability,etc.Therefore,g-C_(3)N_(4) has attracted extensive attention in the field of photocatalytic hydrogen production in the last two decades.This review comprehensively outlines the research trajectory of g-C_(3)N_(4) photocatalytic hydrogen production,encompassing development,preparation methods,advantages,and disadvantages.A concise introduction to g-C_(3)N_(4) is provided,as well as an analysis of the underlying mechanism of the photocatalytic system.Additionally,it delves into the latest techniques to enhance performance,including nanostructure design,elemental doping,and heterojunction construction.The applications of g-C_(3)N_(4) based photocatalysts in hydrogen production are surveyed,underscoring the significance of catalyst active sites and g-C_(3)N_(4) synthesis pathways.At length,concluded are insights into the challenges and opportunities presented by g-C_(3)N_(4) based photocatalysts for achieving heightened hydrogen production.

Layer-Contacted Graphene-Like BN/Ultrathin Bi_(3)O_(4)Br Stacking for Boosting Photocatalytic Molecular Oxygen Activation

Novel graphene-like boron nitride(BN)/Bi_(3)O_(4)Br photocatalysts have been controllably synthesized through a facile solvothermal method for the first time. Layer contact stacking between graphene-like BN and ultrathin Bi_(3)O_(4)Br was achieved with strong interaction. Dehalogenation is designed to harvest more visible light, and the ultrathin structure of Bi_(3)O_(4)Br is designed to accelerate charge transfer from inside to the surface. After graphene-like BN was engineered, photocatalytic performance greatly improved under visible light irradiation. Graphene-like BN can act as a surface electron-withdrawing center and adsorption center, facilitating molecular oxygen activation. O_(2)^(·-)was determined to be the main active species during the degradation process through analyses of electron spin resonance and XPS valence band spectra.

Oxygen defect modulating the charge behavior in titanium dioxide for boosting photocatalytic nitrogen fixation performance

Extremely high-temperature and high-pressure requirement of Haber-Bosch process motivates the search for a sustainable ammonia synthesis approach under mild conditions.Photocatalytic technology is a potential solution to convert N2 to ammonia.However,the poor light absorption and low charge carrier separation efficiency in conventional semiconductors are bottlenecks for the application of this technology.Herein,a facile synthesis of anatase TiO_(2)nanosheets with an abundance of surface oxygen vacancies(TiO_(2)-OV)via the calcination treatment was reported.Photocatalytic experiments of the prepared anatase TiO_(2)samples showed that TiO_(2)-OV nanosheets exhibited remarkably increased ammonia yield for solar-driven N2 fixation in pure water,without adding any sacrificial agents.EPR,XPS,XRD,UV-Vis DRS,TEM,Raman,and PL techniques were employed to systematically explore the possible enhanced mechanism.Studies revealed that the introduced surface oxygen vacancies significantly extended the light absorption capability in the visible region,decreased the adsorption and activation barriers of inert N2,and improved the separation and transfer efficiency of the photogenerated electronhole pairs.Thus,a high rate of ammonia evolution in TiO_(2)-OV was realized.This work offers a promising and sustainable approach for the efficient artificial photosynthesis of ammonia.

Engineering of oxygen vacancy and bismuth cluster assisted ultrathin Bi_(12)O_(17)Cl_(2)nanosheets with efficient and selective photoreduction of CO_(2)to CO

The photocatalytic conversion of CO_(2)into solar‐powered fuels is viewed as a forward‐looking strategy to address energy scarcity and global warming.This work demonstrated the selective photoreduction of CO_(2)to CO using ultrathin Bi_(12)O_(17)Cl_(2)nanosheets decorated with hydrothermally synthesized bismuth clusters and oxygen vacancies(OVs).The characterizations revealed that the coexistences of OVs and Bi clusters generated in situ contributed to the high efficiency of CO_(2)–CO conversion(64.3μmol g^(−1)h^(−1))and perfect selectivity.The OVs on the facet(001)of the ultrathin Bi_(12)O_(17)Cl_(2)nanosheets serve as sites for CO_(2)adsorption and activation sites,capturing photoexcited electrons and prolonging light absorption due to defect states.In addition,the Bi‐cluster generated in situ offers the ability to trap holes and the surface plasmonic resonance effect.This study offers great potential for the construction of semiconductor hybrids as multiphotocatalysts,capable of being used for the elimination and conversion of CO_(2)in terms of energy and environment.

Electronic structure and spin state regulation of vanadium nitride via a sulfur doping strategy toward flexible zinc-air batteries

Owing to the distinctive structural characteristics,vanadium nitride(VN)is highly regarded as a catalyst for oxygen reduction reaction(ORR)in zinc-air batteries(ZABs).However,VN exhibits limited intrinsic ORR activity due to the weak adsorption ability to O-containing species.Here,the S-doped VN anchored on N,S-doped multi-dimensional carbon(S-VN/Co/NS-MC)was constructed using the solvothermal and in-situ doping methods.Incorporating sulfur atoms into VN species alters the electron spin state of vanadium in the S-VN/Co/NS-MC for regulating the adsorption energy of vanadium sites to oxygen molecules.The introduced sulfur atoms polarize the V 3d_(z)^(2) electrons,shifting spin-down electrons closer to the Fermi level in the S-VN/Co/NS-MC.Consequently,the introduction of sulfur atoms into VN species enhances the adsorption energy of vanadium sites for oxygen molecules.The*OOH dissociation transitions from being unspontaneous on the VN surface to a spontaneous state on the S-doped VN surface.Then,the ORR barrier on the S-VN/Co/NS-MC surface is reduced.The S-VN/Co/NS-MC demonstrates a higher half-wave potential and limiting current density compared to the VN/Co/N-MC.The S-VN/Co/NS-MC-based liquid ZABs display a power density of 195.7 m W cm^(-2),a specific capacity of 815.7 m A h g^(-1),and a cycling stability exceeding 250 h.The S-VN/Co/NS-MC-based flexible ZABs are successfully employed to charge both a smart watch and a mobile phone.This approach holds promise for advancing the commercial utilization of VN-based catalysts in ZABs.

In situ N-doped Bi_(3)O_(4)Br/(BiO)_(2)CO_(3) ultrathin nanojunctions with matched energy band structure for nonselective photocatalysis pollutant removal

Novel N-doped Bi_(3)O_(4)Br/(BiO)_(2)CO_(3) ultrathin nanojunctions have been prepared.Alkalization dehalogenation was performed to form Bi_(3)O_(4)Br,surfactant was employed to control the ultrathin thickness,and few-layers of C_(3)N_(4) as a sacrificial agent were used to build the N-doped(BiO)_(2)CO_(3).The photocatalytic behavior of the achieved N-doped Bi_(3)O_(4)Br/(BiO)_(2)CO_(3) ultrathin nanojunctions was evaluated through the degradation of antibiotic agent ciprofloxacin,tetracycline hydro-chloride,and endocrine disrupting chemical bisphenol A as well as typical dye rhodamine B under visible light irradiation.The matched energy band structure between Bi_(3)O_(4)Br and(BiO)_(2)CO_(3) could endow the highly efficient interfacial charge separation,thus leading to excellent nonselective photocatalytic behavior.The structure design in this system will open new windows for the reasonable design of other photocatalysts.