A flexible carbon nanotube@V_(2)O_(5) film as a high-capacity and durable cathode for zinc ion batteries

Aqueous zinc-ion batteries(ZIBs)are receiving a continuously increasing attention for mobile devices,especially for the flexible and wearable electronics,due to their non-toxicity,non-flammability,and low-cost features.Despite the significant progress in achieving higher capacities for electrode materials of ZIBs,to endow them with high flexibility and economic feasibility is,however,still a significant challenge remaining unsolved.Herein,we present a highly flexible composite film composed of carbon nanotube film and V_(2)O_(5)(CNTF@V_(2)O_(5))with high strength and high conductivity,which is prepared by simply impregnating a porous CNT film with an aqueous V_(2)O_(5)sol under vacuum.For this material,intimate incorporation between V_(2)O_(5)and CNTs has been achieved,successfully integrating the high zinc ion storage capability with high mechanical flexibility.As a result,this CNTF@V_(2)O_(5)film delivers a high capacity of 356.6 m Ah g^(-1)at 0.4 A g^(-1)and excellent cycling stability with 80.1%capacity retention after 500 cycles at 2.0 A g^(-1).The novel strategy and the outstanding battery performance presented in this work should shed light on the development of high-performance and flexible ZIBs.

Long-lasting,reinforced electrical networking in a high-loading Li_(2)S cathode for high-performance lithium–sulfur batteries

Realizing a lithium sulfide(Li_(2)S)cathode with both high energy density and a long lifespan requires an innovative cathode design that maximizes electrochemical performance and resists electrode deterioration.Herein,a high-loading Li_(2)S-based cathode with micrometric Li_(2)S particles composed of two-dimensional graphene(Gr)and one-dimensional carbon nanotubes(CNTs)in a compact geometry is developed,and the role of CNTs in stable cycling of high-capacity Li–S batteries is emphasized.In a dimensionally combined carbon matrix,CNTs embedded within the Gr sheets create robust and sustainable electron diffusion pathways while suppressing the passivation of the active carbon surface.As a unique point,during the first charging process,the proposed cathode is fully activated through the direct conversion of Li_(2)S into S_(8) without inducing lithium polysulfide formation.The direct conversion of Li_(2)S into S_(8) in the composite cathode is ubiquitously investigated using the combined study of in situ Raman spectroscopy,in situ optical microscopy,and cryogenic transmission electron microscopy.The composite cathode demonstrates unprecedented electrochemical properties even with a high Li_(2)S loading of 10 mg cm^(–2);in particular,the practical and safe Li–S full cell coupled with a graphite anode shows ultra-long-term cycling stability over 800 cycles.

Intrinsic electrochemical activity of Ni in Ni_(3)Sn_(4) anode accommodating high capacity and mechanical stability for fast-charging lithium-ion batteries

Fast interfacial kinetics derived from bicontinuous three-dimensional(3D)architecture is a strategic feature for achieving fast-charging lithium-ion batteries(LIBs).One of the main reasons is its large active surface and short diffusion path.Yet,understanding of unusual electrochemical properties still remain great challenge due to its complexity.In this study,we proposed a nickel–tin compound(Ni_(3)Sn_(4))supported by 3D Nickel scaffolds as main frame because the Ni_(3)Sn_(4) clearly offers a higher reversible capacity and stable cycling performance than bare tin(Sn).In order to verify the role of Ni,atomic-scale simulation based on density functional theory systematically addressed to the reaction mechanism and structural evolution of Ni_(3)Sn_(4) during the lithiation process.Our findings are that Ni enables Ni_(3)Sn_(4) to possess higher mechanical stability in terms of reactive flow stress,subsequently lead to improve Li storage capability.This study elucidates an understanding of the lithiation mechanism of Ni_(3)Sn_(4) and provides a new perspective for the design of high-capacity and high-power 3D anodes for fast-charging LIBs.