Mechanical responses and crystal plasticity model of CoCrNi medium-entropy alloy under ramp wave compression

It is of substantial scientific significance and practical value to reveal and understand the multiscale mechanical properties and intrinsic mechanisms of medium-entropy alloys(MEAs)under high strain rates and pressures.In this study,the mechanical responses and deformation mechanisms of an equiatomic CoCrNi MEA are investigated utilizing magnetically driven ramp wave compression(RWC)with a strain rate of 105 s^(−1).The CoCrNi MEA demonstrates excellent dynamic mechanical responses and yield strength under RWC compared with other advanced materials.Multiscale characterizations reveal that grain refinement and abundant micromechanisms,including dislocation slip,stacking faults,nanotwin network,and Lomer–Cottrell locks,collectively contribute to its excellent performance during RWC.Furthermore,dense deformation twins and shear bands intersect,forming a weave-like microstructure that can disperse deformation and enhance plasticity.On the basis of these observations,we develop a modified crystal plasticity model with coupled dislocation and twinning mechanisms,providing a relatively accurate quantitative description of the multiscale behavior under RWC.The results of simulations indicate that the activation of multilevel microstructures in CoCrNi MEA is primarily attributable to stress inhomogeneities and localized strain during RWC.Our research offers valuable insights into the dynamic mechanical responses of CoCrNi MEA,positioning it as a promising material for use under extreme dynamic conditions.

Improved wettability and mechanical properties of metal coated carbon fiber-reinforced aluminum matrix composites by squeeze melt infiltration technique

In order to improve the wettability and bonding performance of the interface between carbon fiber and aluminum matrix,nickel-and copper-coated carbon fiber-reinforced aluminum matrix composites were fabricated by the squeeze melt infiltration technique.The interface wettability,microstructure and mechanical properties of the composites were compared and investigated.Compared with the uncoated fiber-reinforced aluminum matrix composite,the microstructure analysis indicated that the coatings significantly improved the wettability and effectively inhibited the interface reaction between carbon fiber and aluminum matrix during the process.Under the same processing condition,aluminum melt was easy to infiltrate into the copper-coated fiber bundles.Furthermore,the inhibited interface reaction was more conducive to maintain the original strength of fiber and improve the fiber−matrix interface bonding performance.The mechanical properties were evaluated by uniaxial tensile test.The yield strength,ultimate tensile strength and elastic modulus of the copper-coated carbon fiber-reinforced aluminum matrix composite were about 124 MPa,140 MPa and 82 GPa,respectively.In the case of nickel-coated carbon fiber-reinforced aluminum matrix composite,the yield strength,ultimate tensile strength and elastic modulus were about 60 MPa,70 MPa and 79 GPa,respectively.The excellent mechanical properties for copper-coated fiber-reinforced composites are attributed to better compactness of the matrix and better fiber−matrix interface bonding,which favor the load transfer ability from aluminam matrix to carbon fiber under the loading state,giving full play to the bearing role of carbon fiber.

Design and preliminary test of a 105/140 GHz dual-frequency MW-level gyrotron

A dual-frequency(105/140 GHz)MW-level continuous-wave gyrotron was developed for fusion application at Institute of Applied Electronics,China Academy of Engineering Physics.This gyrotron employs a cylindrical cavity working in the TE18,7 mode at 105 GHz and the TE24,9 mode at 140 GHz.A triode magnetron injection gun and a built-in quasi-optical mode converter were designed to operate at these two frequencies.For the proof-test phase,the gyrotron was equipped with a single-disk boron nitride window to achieve radio frequency output with a power of~500 k W for a short-pulse duration.In the preliminary short-pulse proof-test in the first quarter of2021,the dual-frequency gyrotron achieved output powers of 300 k W at 105 GHz and 540 k W at140 GHz,respectively,under 5 Hz 1 ms continuous pulse-burst operations.Power upgrade and pulse-width extension were hampered by the limitation of the high-voltage power supply and output window.This gyrotron design was preliminarily validated.

Comparison of neutron energy spectrum unfolding methods and evaluation of rationality criteria

The neutron energy spectrum was measured using a Bonner sphere spectrometer at six locations inside the containment vessel of a nuclear reactor at the Qinshan nuclear power plant. The structures of the neutron spectra obtained by the maximum entropy, iteration, and genetic algorithm methods were consistent with one another and could be interpreted as the spectral superposition of different energy regions. The characteristic parameters of the neutron spectrum, including the fluence rate,average energy, and neutron ambient dose equivalent rate H^(*)(10), were in good agreement among the three methods. In addition, an LB6411 neutron ambient dose equivalent meter was employed to obtain the H^(*)(10) directly for comparison.These findings indicate that neutron spectrum unfolding methods can be used to overcome the problems associated with the response functions of dosimeters to provide more accurate H^(*)(10) values. In this study, the following three evaluation criteria were systematically addressed to ensure the accuracy of the unfolded spectra: count rates of the inverse solutions,neutron spectrum structures, and comparison of key parameters.

Physical design and cooling test of C-band standing wave accelerating tube

The physical design and cooling test of a C-band 2MeV standing wave （SW） accelerating tube are described in this paper. The designed accelerating structure consists of 3-cell buncher and 4-cell accelerating section with a total length of about 163mm, excited with 1MW magnetron. Dynamic simulation presents that about 150mA beam pulse current and 30% capture efficiency can be achieved. By means of nonlinear Gauss fit on electron transverse distribution, the diameter of beam spot FWHM （full width at half maximum of density distribution） is about 0.55mm. Cooling test results of the accelerating tube show that frequencies of cavities are tuned to 5527MHz and the field distribution of bunching section is about 3：9：10.

Experimental Characterization of Sub-picosecond Electron Bunch Length with Coherent Diffraction Radiation

Diffraction radiation is one of the most promising candidates for electron beam diagnostics for the International Linear Collider, x-ray free electron lasers and energy recovery linac due to its non-intercepting characteristics. We report the non-intercepting measurement of sub-ps electron bunch length with coherent diffraction radiation. The bunch length is measured with a Martin-Puplett interferometer and the detailed longitudinal bunch shape is reconstructed with the Kramers-Kronig relation. The rms bunch length is found to be about 0.73ps, which confirms a successful commissioning of the bunch compressor and the interferometer.

Damage effect and mechanism of the GaAs pseudomorphic high electron mobility transistor induced by the electromagnetic pulse

The damage effect and mechanism of the electromagnetic pulse （EMP） on the GaAs pseudomorphic high electron mobility transistor （PHEMT） are investigated in this paper. By using the device simulation software, the distributions and variations of the electric field, the current density and the temperature are analyzed. The simulation results show that there are three physical effects, i.e., the forward-biased effect of the gate Schottky junction, the avalanche breakdown, and the thermal breakdown of the barrier layer, which influence the device current in the damage process. It is found that the damage position of the device changes with the amplitude of the step voltage pulse. The damage appears under the gate near the drain when the amplitude of the pulse is low, and it also occurs under the gate near the source when the amplitude is sufficiently high, which is consistent with the experimental results.

Design and experimental results of a 28 GHz,400 kW gyrotron for electron cyclotron resonance heating

A high-power 28 GHz gyrotron has been successfully developed at the Institute of Applied Electronics,China Academy of Engineering Physics.This gyrotron was designed for electron cyclotron resonance heating(ECRH)in the spherical tokamak XL-50.A diode magnetron injection gun was designed to produce the required gyrating electron beam.The gyrotron operates in the TE8,3mode in a cylindrical open cavity.An internal quasi-optical mode converter was designed to convert the operating mode into a fundamental Gaussian wave beam and separate the spent electron beam from the outgoing microwave power.A tube has been built and successfully tested.The operational frequency of the tube is 28.1 GHz.For beam parameters at an accelerating voltage of 71 kV and beam current of 16 A,the gyrotron has delivered an output power of 400 kW,with a pulse length of 5 s.The output efficiency is about 50%with a singlestage depressed collector.The gyrotron has been installed on the XL-50 and has played an important role in the ECRH experiments.

Phase transition model of water flow irradiated by high-energy laser in a chamber

In the absorption chamber of a high-energy laser energy meter, water is directly used as an absorbing medium and the interaction of the high-power laser and the water flow can produce a variety of physical phenomena such as phase transitions. The unit difference method is adopted to deduce the phase transition model for water flow irradiated by a high-energy laser. In addition, the model is simulated and verified through experiments. Among them, the experimental verification uses the photographic method, shooting the distribution and the form of the air mass of water flow in different operating conditions, which are compared with the simulation results. The research shows that it is achievable to reduce the intensity of the phase transition by increasing the water flow, reducing the power intensity of the beam, shortening the distance the beam covers, reducing the initial water temperature or adopting a shorter wavelength laser. The study＇s results will provide the reference for the design of a water-direct-absorption-type high-energy laser energy meter as well as an analysis of the interaction processes of other similar high-power lasers and water flow.

Preliminary analysis of resonance effect by Helmholtz Schrdinger method

The Helmholtz SchrSdinger method is employed to study the electric field standing wave caused by coupling through a simple slot. There is a good agreement between the numerical results and the resonant conditions presented by the Helmholtz-Schrodinger method. Thus, it can be used in similar cases where the amplitude of the electric field is the important quantity or eigenfunctions of the Schrodinger equation are needed for complicated quantum structures with hard wall boundary conditions.

Development and experimental study of large size composite plasma immersion ion implantation device

Plasma immersion ion implantation （PI） overcomes the direct exposure limit of traditional beam- line ion implantation, and is suitable for the treatment of complex work-piece with large size. Pm technology is often used for surface modification of metal, plastics and ceramics. Based on the requirement of surface modification of large size insulating material, a composite full-directional PHI device based on RF plasma source and metal plasma source is developed in this paper. This device can not only realize gas ion implantation, but also can realize metal ion implantation, and can also realize gas ion mixing with metal ions injection. This device has two metal plasma sources and each metal source contains three cathodes. Under the condition of keeping the vacuum unchanged, the cathode can be switched freely. The volume of the vacuum chamber is about 0.94 m3, and maximum vacuum degree is about 5 x10-4 Pa. The density of RF plasma in homogeneous region is about 109 cm-3, and plasma density in the ion implantation region is about 101x cm-3. This device can be used for large-size sample material PHI treatment, the maximum size of the sample diameter up to 400 mm. The experimental results show that the plasma discharge in the device is stable and can run for a long time. It is suitable for surface treatment of insulating materials.

Theoretical and Experimental Study of Scattering of a Plane Wave by an Inhomogeneous Plasma Sphere

Scattering of electromagnetic waves by an inhomogeneous plasma sphere has been studied theoretically and experimentally. The offset angles of electromagnetic waves caused by the plasma sphere have been observed experimentally. The effects of the electromagnetic wave frequency and plasma density on the offset angle are discussed. The plasma density is estimated with the offset angle.

Cost-effective Energy Monitoring of Domestic Off-grid PV Systems

Domestic off-grid renewable energy systems have become common place in many areas of the world, as humanity seeks to keep abreast with global technological changes and advancements. This paper aims to present a cost-effective energy monitoring system which may be used to analyze and evaluate the operation of a domestic off-grid PV system. Parameters which are monitored include the output voltage and current from a 55 W polycrystalline PV panel. The output voltage and current from a power regulation circuit (which could be a DC-DC converter, solar charger or MPPT) is also monitored with this singular system which incorporates a data logging interface circuit, a data logger and a personal computer.

Observation and mitigation of image distortion in high-energy electron radiography

Image distortion caused by the angular misalignment of quadrupole magnets in high-energy electron radiography has been studied systematically.We propose that the distortion originates from the coupling of the electron motions in the transverse directions,based on a theoretical analysis and the transfer-matrix method.The relative angular rotation between the second and third magnetic quadrupoles was identified as the main contributor to image distortion.This was verified by both a beam-dynamics simulation and experiments.Different strategies to mitigate this image distortion are also explored,including magnets online tuning,higher beam energy and larger magnification factor.This study provides criteria for designing experiments and paves the way for achieving higher image precision.

X-ray focusing using an x-ray lens composed of multi-square polycapillary slices

A new type of x-ray lens composed of multi-square polycapillary slices(ASPXRL)used in focusing parallel x-ray beam was presented in this paper.Compared with conventional x-ray polycapillary lens,ASPXRL can provide smaller and brighter focus.The effects of the manufacturing imperfections on focusing quality of ASPXRL were evaluated with the values of transmission efficiency and discussed.It is suggested that ASPXRL has application prospects as a condenser lens for x-ray microscopy and flux collectors for x-ray analytical instruments.

Field Emission Properties of Nano-DLC Films Prepared on Cu Substrates by Pulsed Laser Deposition

Nano-diamond like carbon（DLC） thin films were prepared on fused silica and Cu substrates by the pulsed-laser deposition technique with different laser intensities. Step-measurement, atomic force microscope（AFM）, UV-VIS-NIR transmittance spectroscopy and Raman spectroscopy were used to characterize the films. It was shown that the deposition rate increases with the laser intensity, and the films prepared under different laser intensities show different transparency. Raman measurement showed that the content of sp^3 of the Nano-DLC thin films decreases with the laser intensity. The field emission properties of the Nano-DLC thin films on Cu substrates were studied by the conventional diode method, which showed that the turn-on field increases and the current density decreases with sp^3 content in the films. A lower turn-on field of 6 V/um and a higher current density of 1 uA/cm^2 were obtained for Nano-DLC thin films on Cu substrate.

Visualizing the melting processes in ultrashort intense laser triggered gold mesh with high energy electron radiography

High-energy electron radiography(HEER)is a promising diagnostic tool for high-energy-density physics,as an alternative to tools such as X/γ-ray shadowgraphy and high-energy proton radiography.Impressive progress has been made in the development and application ofHEER in the past fewyears,and its potential for high-resolution imaging of static opaque objects has been proved.In this study,by taking advantage of the short pulse duration and tunable time structure of high-energy electron probes,time-resolved imaging measurements of high-energy-density gold irradiated by ultrashort intense laser pulses are performed.Phenomena at different time scales frompicoseconds to microseconds are observed,thus proving the feasibility of this technique for imaging of static and dynamic objects.

Picosecond terahertz pump-probe realized from Chinese terahertz free-electron laser

Electron energy relaxation timeτis one of the key physical parameters for electronic materials.In this study,we develop a new technique to measureτin a semiconductor via monochrome picosecond(ps)terahertz(THz)pump and probe experiment.The special THz pulse structure of Chinese THz free-electron laser(CTFEL)is utilized to realize such a technique,which can be applied to the investigation into THz dynamics of electronic and optoelectronic materials and devices.We measure the THz dynamical electronic properties of high-mobility n-GaSb wafer at 1.2 THz,1.6 THz,and 2.4 THz at room temperature and in free space.The obtained electron energy relaxation time for n-GaSb is in line with that measured via,e.g.,four-wave mixing techniques.The major advantages of monochrome ps THz pump-probe in the study of electronic and optoelectronic materials are discussed in comparison with other ultrafast optoelectronic techniques.This work is relevant to the application of pulsed THz free-electron lasers and also to the development of advanced ultrafast measurement technique for the investigation of dynamical properties of electronic and optoelectronic materials.

Theoretical models for designing a 220-GHz folded waveguide backward wave oscillator

In this paper, the basic equations of beam-wave interaction for designing the 220 GHz folded waveguide （FW） backward wave oscillator （BWO） are described. On the whole, these equations are mainly classified into small signal model （SSM）, large signal model （LSM）, and simplified small signal model （SSSM）. Using these linear and nonlinear one-dimensional （1D） models, the oscillation characteristics of the FW BWO of a given configuration of slow wave struc- ture （SWS） can be calculated by numerical iteration algorithm, which is more time efficient than three-dimensional （3D） particle-in-cell （PIC） simulation. The SSSM expressed by analytical formulas is innovatively derived for determining the initial values of the FW SWS conveniently. The dispersion characteristics of the FW are obtained by equivalent circuit analysis. The space charge effect, the end reflection effect, the lossy wall effect, and the relativistic effect are all considered in our models to offer more accurate results. The design process of the FW BWO tube with output power of watt scale in a frequency range between 215 GHz and 225 GHz based on these 1D models is demonstrated. The 3D PIC method is adopted to verify the theoretical design results, which shows that they are in good agreement with each other.

A 7 T Pulsed Magnetic Field Generator for Magnetized Laser Plasma Experiments

A pulsed magnetic field generator was developed to study the effect of a magnetic field on the evolution of a laser-generated plasma. A 40 kV pulsed power system delivered a fast （-230 ns）, 55 kA current pulse into a single-turn coil surrounding the laser target, using a capacitor bank of 200 nF, a laser-triggered switch and a low-impedance strip transmission line. A one-dimensional uniform 7 T pulsed magnetic field was created using a Helmholtz coil pair with a 6 mm diameter. The pulsed magnetic field was controlled to take effect synchronously with a nanosecond heating laser beam, a femtosecond probing laser beam and an optical Intensified Charge Coupled Device （ICCD） detector. The preliminary experiments demonstrate bifurcation and focusing of plasma expansion in a transverse magnetic field.