Study of the reaction mechanism for preparing powdered activated coke with SO_(2)adsorption capability via one-step rapid activation method under flue gas atmosphere

In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.

Solar Driven 15.7% Hydrogen Conversion by Harmony of Light Harvesting,Electron Transporting Bridge,and S-Defection in a Self-Assembled Microscale CuS/rGO/CP Photoanode

CuS is an encouraging photoelectrode candidate that meets the essential requirements for efficient solar-to-hydrogen production,but it has not been thoroughly studied.A CuS light absorber layer is grown by the self-assembly of copper and sulfur precursors on a carbon paper(CP)electrode.Simultaneously,rGO is introduced as a buffer layer to control the optical and electrical properties of the absorber.The well-ordered microstructural arrangement suppresses the recombination loss of electrons and holes owing to enhanced charge-carrier generation,separation,and transport.The potential reaching 10 mA cm^(-2)in 1.0 M KOH solution is significantly lowered to 0.87 V,and the photocurrent density at 1.23 V is 94.7 mA cm^(-2).The computational result reveals that the potential-determining step is sensitive to O^(*)stability;the lower stability of O^(*)in the thin layer of CuS/rGO decreases the free-energy gap between the initial and final states of the potential-determining step,resulting in a lowering of the onset potential.The faradaic efficiency for the photoelectrochemical oxygen evolution reaction in the optimized 2CuS/1rGO/CP photoanode is 98.60%,and the applied bias photon-to-current and the solar-to-hydrogen efficiencies are 11.2%and 15.7%,respectively,and its ultra-high performance is maintained for 250 h.These record-breaking achievement indices may be a trigger for establishing a green hydrogen economy.

Determination of 14 Organophosphorus Pesticide Residues in Mutton by Gel Permeation Chromatography-Gas Chromatography-Mass Spectrometry(GPC-GC-MS)

[Objectives]This study was conducted to purify mutton samples by gel permeation chromatography(GPC).[Methods]Fourteen organophosphorus pesticide residues in samples were qualitatively and quantitatively analyzed by gas chromatography-mass spectrometry(GC-MS)in selective ion scanning mode(SIM).[Results]The organophosphorus pesticide standard solutions showed good linearity in the mass concentration range of 0.1-10.0μg/ml with correlation coefficients(r)not lower than 0.999,and the detection limits(S=3 N)ranged from 0.01 to 0.05 mg/kg.The average recovery values were in the range of 80.2%-99.7%,with relative standard deviations(RSDs,n=3)in the range of 1.8%-6.3%,at the addition levels of 0.5,1.0 and 2.0 mg/kg.[Conclusions]The method is simple,sensitive and accurate,and can be used for the determination of organophosphorus pesticide residues in mutton.

Function and Application Progress of Probiotics in Food

Probiotics have a long history of use in human production and life.With the gradual deepening of the research on the functions of probiotics,their various nutritional and health benefits for the human body have also become increasingly clear.Existing research shows that probiotics can regulate intestinal flora,and improve immunity and even the symptoms of some diseases.Therefore,in the food industry,the application of probiotics from traditional fermented foods to functional foods has become more and more extensive.In this paper,the research progress of nutritional function and application of probiotics in food at home and abroad was reviewed,in order to provide some reference for the safe application of probiotics in food.

Research Progress on Detection Techniques of Fungicide Residues in Chinese Chives

Chinese chive is a kind of medicinal and edible plant,with many diseases,and chemical fungicides are usually used for control.In order to find out the risk of pesticide residues in Chinese chives,this paper summarized relevant literatures published in recent years,and sorted out and analyzed the types of pesticides used and detection techniques of common diseases in Chinese chives.

Comparative Study of Solar PV Power Plant Dimensionnement Connected to Network Based on Monofacial and Bifacial Modules

This article presents the results of comparative study of two PV solar modules technologies,namely monofacial and bifacial.This study main objective is to identify conditions and parameters that make it possible to obtain better energy and economic efficiency from one or other of two technologies.The study reason lies in revival observed on bifacial module in recent years where all the major manufacturers of PV solar panels are developing them where in a few years,this technology risks being at the same price as the monofacial solar panel with better efficiency.Economic indicator used is energy levelized cost(LCOE)which is function technology type,energy productivity,annual investment and operation cost.To achieve this,a 3.685 MWc solar PV power plant was dimensioned and simulated under Matlab for a 3.5 ha site with a 2,320,740,602 FCFA budget for monofacial installation,against 1,925,188,640 FCFA for 2.73 MWc bifacial installation.The LCOE comparative analysis of two technologies calculated over a period of 25 years,showed that plant with bifacial panels is more beneficial if bifacial gain is greater than 9%.It has further been found that it is possible to gain up to 40%of invested cost if bifacial gain reaches 45%.Finally,a loss of about 10%of invested cost could be recorded if bifacial gain is less than 9%.

Functionally graded structure of a nitride-strengthened Mg_(2)Si-based hybrid composite

The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed fusion.This is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid composite.This study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive manufacturing.This strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid composite.Consequently,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional structure.This outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.

Thin-Wall Aluminum Die-Casting Technology for Development of Notebook Computer Housing

Silicon-based aluminum casting alloys are known to be one of the most widely used alloy systems mainly due to their superior casting characteristics and unique combination of mechanical and physical properties. However,manufacturing of thin-walled aluminum die-casting components,less than 1.0 mm in thickness,is generally known to be very difficult task to achieve aluminum casting alloys with high fluidity.Therefore,in this study,the optimal die-casting conditions for producing 297 mm×210 mm×0.7 mm thin-walled aluminum component was examined experimentally by using 2 different gating systems,tangential and split type,and vent design.Furthermore,computational solidification simulation was also conducted.The results showed that split type gating system was preferable gating design than tangential type gating system at the point of view of soundness of casting and distortion generated after solidification.It was also found that proper vent design was one of the most important factors for producing thin-wall casting components because it was important for the fulfillment of the thin-wall cavity and the minimization of the casting distortion.

Study on Functional and Structure Properties of Soluble Dietary Fiber Modified by Extrusion-expansion Technology from Peanut Shells

[Objectives] This study was conducted to investigate the feasibility of using modified peanut dietary fiber as a functional food ingredient. [Methods]Using peanut shells as a test material,the process parameters of soluble dietary fiber( SDF) modified by extrusion and expansion were studied,and the functional and structural characteristics of SDF before and after modification were discussed. [Results] The optimum conditions were as follows: screw speed 200 rpm,temperature 130 ℃ and moisture content 20 %,and the SDF extraction yield was 22. 3%. The modified SDF showed BCmax values of( 378. 5 ± 5. 3),( 278. 3 ± 3. 2)and( 167. 2 ± 2. 5) μmol/g and BCmin of( 30. 4 ± 1. 3),( 63. 4 ± 3. 7) and( 71. 3 ± 4. 2) μmol/L,for Pb,As and Cu,respectively,indicating that the adsorption to the three heavy metals was enhanced. The modified SDF had a porous network like honeycomb and swelled structure. [Conclusions]Therefore,it is feasible to modify SDF by extrusion and expansion.

Enhancing Hydrophilicity of Thick Electrodes for High Energy Density Aqueous Batteries

Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.

Rapid epitaxy of 2-inch and high-quality α-Ga_(2)O_(3) films by mist-CVD method

High thickness uniformity and large-scale films of α-Ga_(2)O_(3) are crucial factors for the development of power devices.In this work, a high-quality 2-inch α-Ga_(2)O_(3) epitaxial film on c-plane sapphire substrates was prepared by the mist-CVD method.The growth rate and phase control mechanisms were systematically investigated. The growth rate of the α-Ga_(2)O_(3) films was limited by the evaporation of the microdroplets containing gallium acetylacetonate. By adjusting the substrate position(z) from 80 to 50 mm, the growth rate was increased from 307 nm/h to 1.45 μm/h when the growth temperature was fixed at 520 °C.When the growth temperature exceeded 560 °C, ε-Ga_(2)O_(3) was observed to form at the edges of 2-inch sapphire substrate.Phase control was achieved by adjusting the growth temperature. When the growth temperature was 540 °C and the substrate position was 50 mm, the full-width at half maximum(FWHM) of the rocking curves for the(0006) and(10-14) planes were 0.023° and 1.17°. The screw and edge dislocations were 2.3 × 10~6 and 3.9 × 10~(10)cm~(-2), respectively. Furthermore, the bandgaps and optical transmittance of α-Ga_(2)O_(3) films grown under different conditions were characterized utilizing UV-visible and near-IR scanning spectra.

Tungsten incorporated mobil-type eleven zeolite membranes: Facile synthesis and tuneable wettability for highly efficient separation of oil/water mixtures

Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of gravity.W-MEL membranes were grown on stainless steel (SS) meshes through in-situ hydrothermal growth method facilitated with (3-aminopropyl)triethoxysilane (APTES) modification of stainless steel meshes,which promote the heterogeneous nucleation and crystal growth of W-MEL zeolites onto the mesh surface.W-MEL membranes were grown on different mesh size supports to investigate the effect of mesh size on the separation performance of the membrane.The assynthesized W-MEL membrane supported on 500 mesh (25μm)(W-MEL-500) exhibit the hydrophilic nature with a water contact angle of 11.8°and delivers the best hexane/water mixture separation with a water flux and separation efficiency of 46247 L·m^(-2)·h^(-1)and 99.5%,respectively.The wettability of W-MEL membranes was manipulated from hydrophilic to hydrophobic nature by chemically modifying with the fluorine-free compounds (hexadecyltrimethoxysilane (HDTMS) and dodecyltrimethoxysilane(DDTMS)) to achieve efficient oil-permselective separation of heavy oils from water.Among the hydrophobically modified W-MEL membranes,W-MEL-500-HDTMS having a water contact angle of146.4°delivers the best separation performance for dichloromethane/water mixtures with a constant oil flux and separation efficiency of 61490 L·m^(-2)·h^(-1)and 99.2%,respectively along with the stability tested up to 20 cycles.Both W-MEL-500-HDTMS and W-MEL-500-DDTMS membranes also exhibit similar separation performances for the separation of heavy oil from sea water along with a 20-fold lower corrosion rate in comparison with the bare stainless-steel mesh,indicating their excellent stability in seawater.Compared to the reported zeolite membranes for oil/water separation,the as-synthesized and hydrophobically modified W-MEL membranes shows competitive separation performances in terms of flux and separation efficiency,demonstrating the good potentiality for oil/water separation.

One-pot synthesis of bimetallic CeCu-SAPO-34 for high-efficiency selective catalytic reduction of nitrogen oxides with NH_(3) at low temperature

NH_(3) selective catalytic reduction(SCR) has been widely recognized as a promising technique for reducing nitrogen oxides from diesel vehicle exhausts. High-efficiency SCR catalysts that could perform at low temperatures are essential to denitration. In this work, a series of bimetallic CeCu-SAPO-34 molecular sieves were synthesized by one-step hydrothermal method. The Ce Cu-SAPO-34 maintained good crystallinity and a regular hexahedron appearance of Cu-SAPO-34 after introducing Ce species, while exhibiting a higher specific surface area and pore volume. The as-prepared CeCu-SAPO-34 with 0.02%(mass) Ce constituent exhibited the best catalytic activity below 300℃ and a maximum NO_(x) conversion of 99% was attained;the NO_(x) removal rates of more than 68% and 94% were achieved at 150℃ and 200℃, respectively. And the introduction of cerium species in Cu-SAPO-34 improves the low-temperature hydrothermal stability of the catalyst towards NH_(3)-SCR reaction. Additionally, the introduced Ce species could enhance the formation of abundant weak Br?nsted acid centers and promote the synergistic effect between CuO grains and isolated Cu^(2+) to enhance the redox cycle, which benefit the NH_(3)-SCR reaction.This work provides a facile synthesis method of high-efficiency SCR denitration catalysts towards diesel vehicles exhaust treatment under low temperature.

Integration of Machining and Measuring Processes Using On-Machine Measurement Technology

This paper presents an integration methodology for ma chining and measuring processes using OMM (On-Machine Measurement) technology b ased on CAD/CAM/CAI integration concept. OMM uses a CNC machining center as a me asuring station by changing the tools into measuring probes such as touch-type, laser and vision. Although the measurement accuracy is not good compared to tha t of the CMM (Coordinate Measuring Machine), there are distinctive advantages us ing OMM in real situation. In this paper, two topics are handled to show the eff ectiveness of the machining and measuring process integration: (1) inspection pl anning strategy for sculptured surface machining and (2) tool path compensation for profile milling process. For the first topic, as a first step, effective mea suring point locations are determined to obtain optimum results for given sampli ng numbers. Two measuring point selection methods are suggested based on the CAD /CAM/CAI integration concept: (1) by the prediction of cutting errors and (2) by considering cutter contact points to avoid the measurement errors caused by cus ps. As a next step, the TSP (Traveling Salesman Problem) algorithm is applied to minimize the probe moving distance. Appropriate simulations and experiments are performed to verify the proposed inspection planning strategy, and the results are analyzed. For the second topic, a methodology for profile milling error comp ensation is presented by using an ANN (Artificial Neural Network) model trained by the inspection database of OMM system. First, geometric and thermal errors of the machining center are compensated using a closed-loop configuration for the improvement of machining and inspection accuracy. The probing errors are also t aken into account. Then, a specimen workpiece is machined and then the machi ning surface error distribution is measured on the machine using touch-type pro be. In order to efficiently analyze the machining errors, two characteristic err or parameters (W err and D err) are defined. Subsequently, these param eters are modeled by applying the RFB (Radial Basis Function) network approach a s an ANN model. Based on the RBF network model, the tool paths are compensated i n order to effectively reduce the errors by employing an iterative algorithm. In order to validate the approaches proposed in this paper, a concrete case of the machining process is taken into account and about 90% of machining error reduction is successfully accomplished through the proposed approaches.

Application of Mass Spectrometry (MS)-coupled Techniques in Pesticide Residue Detection

Pesticide residue detection is an important work to ensure the quality safety of agricultural products.In the process of agricultural production,in order to prevent and control agricultural diseases and pests,a certain amount of pesticides need to be used.However,if pesticides are used excessively,there will be certain pesticide residues in crops and related products.Therefore,it is necessary to do a good job in pesticide residue detection.The gas chromatography-mass spectrometry(GC-MS)and liquid chromatography-mass spectrometry(LC-MS)detection methods have good results and can effectively detect pesticide residues in related products.This paper reviewed and analyzed the application of GC-MS and LC-MS in pesticide residue detection,and proposed optimization measures based on practical experience,hoping to provide reference for relevant scholars.

Detection and Analysis of Pesticide Residues in Chinese Chives and Risk Assessment of Dietary Intake

[Objectives]This study was conducted to understand the status of pesticide residues and dietary intake risk of Chinese chives in Tangshan area. [Methods] Sixty eight kinds of pesticide residues in 415 Chinese chive samples collected from Tangshan area were qualitatively and quantitatively determined by high-performance liquid chromatography-tandem mass spectrometry(HPLC-MS/MS) and gas chromatography(GC) in 2020. [Results] The results showed that 41 kinds of pesticide residues were detected in the 415 Chinese chive samples, and the detection rate was 69.4%(288/415), and there was a combination of pesticides in many samples. According to the National Food Safety Standard―Maximum Residue Limits of Pesticides in Food(GB 2763-2019), the residues of 12 pesticides exceeded the maximum residue limits(MRLs), and the unqualified rate was 38.07%(158/415). The highest detection rate of clothianidin was 41.20%(171/415), but there was no MRL in GB 2763-2019. The next was procymidone, the detection rate of which was 35.42%(147/415), and the over-standard rate was 30.12%(125/415). Forbidden and restricted pesticides were detected in some samples. According to the dietary exposure risk assessment, the NEDI/ADI values were all less than 1 and the intake risk was within acceptable range. In Tangshan area, the types of pesticides used in Chinese chive production are complex, and there are risks of multi-residue pollution and use of banned and restricted pesticides and unregistered pesticides. It is suggested that routine monitoring of pesticide residues and management of pesticide use should be strengthened to ensure the quality and safety of agricultural products. [Conclusions] This study provides a theoretical basis for the safe production of Chinese chive and the standardized and rational use of pesticides.

Trend of Nitriding on Chromium-Molybdenum Steel via Low Temperature Screen Plasma Technology

Low temperature screen plasma technology, a high plasma density, through using a low energy supply, shows excellent effects on a low alloy chromium-molybdenum steel for plastic molds because it does not show a compound layer and a high surface hardness without a deterioration in matrix hardness. For interest about hardening depth, both the screen plasma nitriding and plasma nitro-carburizing processes were tested including nitrogen, hydrogen and a methane mixed gas environmental at 653 K, 713 K. The optical emission spectroscopy (OES) has been analyzed during screen plasma nitriding (SPN) and a nitro-carburizing process (SPNC) was proceeded at 713 K and the same pressure. I find it difficult to dissociate nitrogen molecules perfectly with neutral nitrogen atoms via the DC-plasma nitriding process. Therefore, the SPN and SPNC process have shown a high density of plasma species even though low temperature plasma conditions have a high peak intensity of Hβ and Hγ in the results of the analysis by OES. The hardness value was measured with the micro-Vickers hardness tester after the SPN, SPNC process and the chemical composition of nitriding layers were traced by GDOES. The screen nitriding layer via the screen plasma technology has shown excellent properties with a thickness depth of about 850 ~ 900 HV without the deterioration of matrix hardness value.

A study of highly activated hydrogen evolution reaction performance in acidic media by 2D heterostructure of N and S doped graphene on MoO_(x)

Herein,a layer of molybdenum oxide(MoO_(x)),a transition metal oxide(TMO),which has outstanding catalytic properties in combination with a carbonbased thin film,is modified to improve the hydrogen production performance and protect the MoO_(x)in acidic media.A thin film of graphene is transferred onto the MoO_(x)layer,after which the graphene structure is doped with N and S atoms at room temperature using a plasma doping method to modify the electronic structure and intrinsic properties of the material.The oxygen functional groups in graphene increase the interfacial interactions and electrical contacts between graphene and MoO_(x).The appearance of surface defects such as oxygen vacancies can result in vacancies in MoO_(x).This improves the electrical conductivity and electrochemically accessible surface area.Increasing the number of defects in graphene by adding dopants can significantly affect the chemical reaction at the interfaces and improve the electrochemical performance.These defects in graphene play a crucial role in the adsorption of H^(+)ions on the graphene surface and their transport to the MoO_(x)layer underneath.This enables MoO_(x)to participate in the reaction with the doped graphene.N^(‐)and S^(‐)doped graphene(NSGr)on MoO_(x)is active in acidic media and performs well in terms of hydrogen production.The initial overpotential value of 359 mV for the current density of−10 mA/cm^(2)is lowered to 228 mV after activation.

Laser Additive Manufacturing of 316L Stainless Steel Thin-wall Ring Parts

The process parameters of laser additive manufacturing have an important influence on the forming quality of the produced items or parts.In the present work,a finite element model for simulating transient heat transfer in such processes has been implemented using the ANSYS software,and the temperature and stress distributions related to 316L stainless steel thin-walled ring parts have been simulated and analyzed.The effect of the laser power,scanning speed,and scanning mode on temperature distribution,molten pool structure,deformation,and stress field has been studied.The simulation results show that the peak temperature,weld pool size,deformation,and residual stress increase with an increase in laser power and a decrease in the scanning speed.The scanning mode has no obvious effect on temperature distribution,deformation,and residual stress.In addition,a forming experiment was carried out.The experimental results show that the samples prepared by laser power P=800 W,V=6 mm/s,and the normal scanning method display good quality,whereas the samples prepared under other parameters have obvious defects.The experimental findings are consistent with the simulation results.

Microstructure and mechanical properties of Mg-3Sn-1Ca reinforced with AlN nano-particles

Microstructural evolution and strengthening mechanisms of Mg-3Sn-1Ca based alloys with additions of different amounts of Al N nanoparticles were investigated.It was found that with increasing the amount of AlN nano-particles the grain size decreases obviously.The existence of AlN nano-particles could refine the primary crystal phases CaMgSn,which provided more heterogeneous nucleation sites for the formation of magnesium.Moreover,such nano-particles could also restrict the grain growth during solidification.After adding AlN nano-particles,both the tensile properties at room temperature and high temperature 250℃and the hardness are largely improved.The improvement of strength is attributed to grain refinement and second phase refinement.