A new type of transformation induced plasticity （TRIP） steel with not only high strength and high ductility but also superior welding and galvanizing properties was designed and developed recently. Low carbon and lo...A new type of transformation induced plasticity （TRIP） steel with not only high strength and high ductility but also superior welding and galvanizing properties was designed and developed recently. Low carbon and low silicon content were preliminarily selected with the aim of meeting the requirements of superior quality in both welding and galvanizing. Phosphorus was chosen as one of the alloying elements, because it could reduce carbon activity in cementite and increase the stability of austenite. In addition, the possibility of phosphorus segregating at grain boundary was also discussed by thermodynamics as well as kinetics. Phase diagram was estimated at high temperature and the composition of the steel was then selected in the hyperperitectic range to avoid problems, which might occur in sheet steel continuous casting. Phase diagram in the inter.critical temperature was estimated for the steel to obtain the starting temperature of fast cooling. For understanding the minimum rate of fast cooling, pearlite growth kinetics was calculated with self-developed diffusion coefficients of elements in grain boundary. Overaging temperature was determined through the calculation of To temperature by both equilibrium and para-equilibrium assumptions, which was different from the current determination, which is only based on an equilibrium estimation.展开更多
Four rhizobacteria selected out of over 500 isolates from rhizosphere of the vegetables in China were further studied for suppression of the root-knot nematode and soil-borne fungal pathogens in laboratory and greenho...Four rhizobacteria selected out of over 500 isolates from rhizosphere of the vegetables in China were further studied for suppression of the root-knot nematode and soil-borne fungal pathogens in laboratory and greenhouse in Belgium. They were identified as Brevibacillus brevis or Bacillus subtilis by Biolog test and partial 16s rDNA sequence comparison. They not only inhibited the radial growth of the root-infecting fungi Rhizoctonia solani SX-6, Pythium aphanidermatum ZJP-1 and Fusarium oxysporum f.sp. cucumerinum ZJF-2 in vitro, but also exhibited strong nematicidal activity by killing the second stage larvae of Meloidogyne javanica to varying degrees in the greenhouse. The toxic principles of bacterium B7 that showed the highest juvenile mortality were partially characterized. The active factors were heat stability and resistance to extreme pH values. B7 used either as seed dressing or soil drench significantly reduced the nematode populations in the rhizosphere and enhanced the growth of mungbean plants over the controls in the presence or absence of R. solani.展开更多
AIM: To study the predictive value of the vegetative- depressive symptoms of the Zung Depression Rating Scale for the occurrence of depression during treatment with peg-interferon α-2b of chronic hepatitis C (CHC) pa...AIM: To study the predictive value of the vegetative- depressive symptoms of the Zung Depression Rating Scale for the occurrence of depression during treatment with peg-interferon α-2b of chronic hepatitis C (CHC) patients. METHODS: The predictive value of vegetative- depressive symptoms at 4 wk of treatment for the occurrence of a subsequent diagnosis of major depressive disorder (MDD) was studied in CHC patients infected after substance use in a prospective, multi- center treatment trial in Belgium. The presence of vegetative-depressive symptoms was assessed using the Zung Scale before and 4 wk after the start of antiviral treatment. RESULTS: Out of 49 eligible patients, 19 (39%) developed MDD. The area under the ROC curve of the vegetative Zung subscale was 0.73, P = 0.004. The sensitivity at a cut-point of > 15/35 was 95% (95% CI: 74-100). The positive predictive value equalled 44% (95% CI: 29-60). CONCLUSION: In this group of Belgian CHC patients infected after substance use, antiviral treatment caused a considerable risk of depression. Seven vegetativedepressive symptoms of the Zung scale at wk 4 of treatment predicted 95% of all emerging depressions, at a price of 56% false positive test results.展开更多
Pharmacogenetics is the study of the association between variability in drug response and （or） drug toxicity and polymorphisms in genes. The goal of this field of science is to adapt drugs to a patient＇s specific g...Pharmacogenetics is the study of the association between variability in drug response and （or） drug toxicity and polymorphisms in genes. The goal of this field of science is to adapt drugs to a patient＇s specific genetic background and therefore make them more efficacious and safe. In this article we describe the variants in genes that influence either the efficacy or toxicity of common drugs used in the treatment of inflammatory bowel diseases （IBD）, ulcerative colitis （UC）, and Crohn＇s disease （CD） including sulfasalazine and mesalazine, azathioprine （AZA） and 6-mercaptopurine （6-MP）, methotrexate （MTX）, glucocorticosteroids （CSs） and infliximab. Furthermore, difficulties with pharmacogenetic studies in general and more specifically in IBD are described. Although pharmacogenetics is a promising field that already contributed to a better understanding of some of the underlying mechanisms of action of drugs used in IBD, the only discovery translated until now into daily practice is the relation between thiopurine S-methyltransferase （TPMT） gene polymorphisms and hematological toxicity of thiopurine treatment. In the future it is necessary to organize studies in well characterized patient cohorts who have been uniformly treated and systematically evaluated in order to quantitate drug response more objectively. An effort should be made to collect genomic DNA from all patients enrolled in clinical drug trials after appropriate informed consent for pharmacogenetic studies.展开更多
A new nonlinear variable structure excitation controller is proposed. Its design combines the differential geometry theory and the variable structure controlling theory. The mathematical model in the form of ＂an affm...A new nonlinear variable structure excitation controller is proposed. Its design combines the differential geometry theory and the variable structure controlling theory. The mathematical model in the form of ＂an affme nonlinear system＂ is set up for the control of a large-scale power system. The static and dynamic performances of the nonlinear variable structure controller are simulated. The response of system with the controller proposed is compared to that of the nonlinear optimal controller when the system is subjected to a variety of disturbances. Simulation results show that the nonlinear variable structure excitation controller gives more satisfactorily static and dynamic performance and better robustness.展开更多
Thermodynamic and kinetic study on TRIP （transformation induced plasticity） steels, cemented carbides and mold steel for plastics were carried out in order to design modern advanced materials. With the sublattice mo...Thermodynamic and kinetic study on TRIP （transformation induced plasticity） steels, cemented carbides and mold steel for plastics were carried out in order to design modern advanced materials. With the sublattice model, equilibrium compositions of ferrite and austenite phases in TRIP steels, as well as volume fraction of austenite at inter-critical temperatures for different time were calculated. Concentration profiles of carbon, manganese, aluminum and silicon in the steels were also estimated in the lattice fixed frame of reference. The effect of Si and Mn on TRIP was discussed according to thermodynamic and kinetic analyses. In order to understand and produce the graded nanophase structure of cemented carbides, miscellaneous phases in the M-Co-C （M= Ti, Ta, Nh） systems and Co-V-C system were modeled. Solution parameters and thermodynamic： properties were listed in detail. The improvement of machining behavior of prehardened mould steel for plastics was obtained by computer-aided composition design. The results showed that the matrix composition of large-section prehardened mould steel for plastic markedly influences the precipitation of non-metallic inclusion and the composition control by the aid of Thermo-Calc software package minimizes the amount of detrimental oxide inclusion. In addition, the modification of calcium was optimized in composition design.展开更多
Phase diagram information of the Fe-C, Fe-Al and Al-C systems are reviewed and the Fe-Al-C system is assessed. A FeAlC database is created by combining a set of thermodynamic parameters established by Kumar and SSOL d...Phase diagram information of the Fe-C, Fe-Al and Al-C systems are reviewed and the Fe-Al-C system is assessed. A FeAlC database is created by combining a set of thermodynamic parameters established by Kumar and SSOL database in Thermo-Calc software package. Ternary phase diagrams are calculated with FeAIC and the newly developed Thermo-Calc databases SSOL2 and SSOL4. The FeAIC database is the best one to describe the Fe-Al-C system. Al and A3 values on the vertical section containing 1.5 wt pct AI are calculated with the FeAIC database in this work. To validate the thermodynamic calculation, critical temperatures Ac1 and Ac3 are determined by using dilatometer analysis. There exist some errors between the calculated values and the experimental results. So further optimization of the Fe-Al-C system regarding bcc and fcc phases is necessary. The experimental data in this work could be of some value in further optimization.展开更多
The use of non-equilibrium plasmas for the synthesis of heterogeneous catalysts is a field that has not been explored intensively. The main reasons for the recent increase of research activity in this field are relate...The use of non-equilibrium plasmas for the synthesis of heterogeneous catalysts is a field that has not been explored intensively. The main reasons for the recent increase of research activity in this field are related to the advantages that go with the technique of plasma enhanced chemical vapor deposition （PECVD）. The most principal of these advantages are the possibility to avoid the use of environmentally harmful solvents and the one-step nature of the procedure, making it very time and labor efficient. Non-equilibrium plasma technology, more in particular dielectric barrier discharge （DBD） technology, has been applied in this work for the synthesis of hybrid tin-silicate materials to be used as a heterogeneous catalyst in the isomerization of glucose into fructose. Atomizers, innovative devices which make it possible to inject nanosized precursor liquids into the plasma zone, are used instead of applying vapor phase techniques, where the amount of precursor is limited by the vapor pressure of the liquid. A design of experiments approach has been employed to investigate the effect of the plasma parameters, namely gas flow, frequency and power density, on the catalytic properties of the catalysts within a well-defined parameter field. It has been found that indeed these parameters, together with the molar ratio of Si/Sn, have an important influence on the activity, selectivity, and thus yield of the produced chemicals.展开更多
基金Item Sponsored by National Natural Science Foundation of China (50671061) National Engineering and Research Center of Advanced Steel Technology , Ansteel Company and China-Belgium Bilateral Project (2001-242)
文摘A new type of transformation induced plasticity （TRIP） steel with not only high strength and high ductility but also superior welding and galvanizing properties was designed and developed recently. Low carbon and low silicon content were preliminarily selected with the aim of meeting the requirements of superior quality in both welding and galvanizing. Phosphorus was chosen as one of the alloying elements, because it could reduce carbon activity in cementite and increase the stability of austenite. In addition, the possibility of phosphorus segregating at grain boundary was also discussed by thermodynamics as well as kinetics. Phase diagram was estimated at high temperature and the composition of the steel was then selected in the hyperperitectic range to avoid problems, which might occur in sheet steel continuous casting. Phase diagram in the inter.critical temperature was estimated for the steel to obtain the starting temperature of fast cooling. For understanding the minimum rate of fast cooling, pearlite growth kinetics was calculated with self-developed diffusion coefficients of elements in grain boundary. Overaging temperature was determined through the calculation of To temperature by both equilibrium and para-equilibrium assumptions, which was different from the current determination, which is only based on an equilibrium estimation.
基金Project supported by the Flemish Governments of Belgium
文摘Four rhizobacteria selected out of over 500 isolates from rhizosphere of the vegetables in China were further studied for suppression of the root-knot nematode and soil-borne fungal pathogens in laboratory and greenhouse in Belgium. They were identified as Brevibacillus brevis or Bacillus subtilis by Biolog test and partial 16s rDNA sequence comparison. They not only inhibited the radial growth of the root-infecting fungi Rhizoctonia solani SX-6, Pythium aphanidermatum ZJP-1 and Fusarium oxysporum f.sp. cucumerinum ZJF-2 in vitro, but also exhibited strong nematicidal activity by killing the second stage larvae of Meloidogyne javanica to varying degrees in the greenhouse. The toxic principles of bacterium B7 that showed the highest juvenile mortality were partially characterized. The active factors were heat stability and resistance to extreme pH values. B7 used either as seed dressing or soil drench significantly reduced the nematode populations in the rhizosphere and enhanced the growth of mungbean plants over the controls in the presence or absence of R. solani.
文摘AIM: To study the predictive value of the vegetative- depressive symptoms of the Zung Depression Rating Scale for the occurrence of depression during treatment with peg-interferon α-2b of chronic hepatitis C (CHC) patients. METHODS: The predictive value of vegetative- depressive symptoms at 4 wk of treatment for the occurrence of a subsequent diagnosis of major depressive disorder (MDD) was studied in CHC patients infected after substance use in a prospective, multi- center treatment trial in Belgium. The presence of vegetative-depressive symptoms was assessed using the Zung Scale before and 4 wk after the start of antiviral treatment. RESULTS: Out of 49 eligible patients, 19 (39%) developed MDD. The area under the ROC curve of the vegetative Zung subscale was 0.73, P = 0.004. The sensitivity at a cut-point of > 15/35 was 95% (95% CI: 74-100). The positive predictive value equalled 44% (95% CI: 29-60). CONCLUSION: In this group of Belgian CHC patients infected after substance use, antiviral treatment caused a considerable risk of depression. Seven vegetativedepressive symptoms of the Zung scale at wk 4 of treatment predicted 95% of all emerging depressions, at a price of 56% false positive test results.
文摘Pharmacogenetics is the study of the association between variability in drug response and （or） drug toxicity and polymorphisms in genes. The goal of this field of science is to adapt drugs to a patient＇s specific genetic background and therefore make them more efficacious and safe. In this article we describe the variants in genes that influence either the efficacy or toxicity of common drugs used in the treatment of inflammatory bowel diseases （IBD）, ulcerative colitis （UC）, and Crohn＇s disease （CD） including sulfasalazine and mesalazine, azathioprine （AZA） and 6-mercaptopurine （6-MP）, methotrexate （MTX）, glucocorticosteroids （CSs） and infliximab. Furthermore, difficulties with pharmacogenetic studies in general and more specifically in IBD are described. Although pharmacogenetics is a promising field that already contributed to a better understanding of some of the underlying mechanisms of action of drugs used in IBD, the only discovery translated until now into daily practice is the relation between thiopurine S-methyltransferase （TPMT） gene polymorphisms and hematological toxicity of thiopurine treatment. In the future it is necessary to organize studies in well characterized patient cohorts who have been uniformly treated and systematically evaluated in order to quantitate drug response more objectively. An effort should be made to collect genomic DNA from all patients enrolled in clinical drug trials after appropriate informed consent for pharmacogenetic studies.
基金financial support from the Fonds Wetenschappelijk Onderzoek(FWO) Vlaanderen and Chinese translation help from Yansong GUO of the Katholieke Universiteit Leuven
文摘A new nonlinear variable structure excitation controller is proposed. Its design combines the differential geometry theory and the variable structure controlling theory. The mathematical model in the form of ＂an affme nonlinear system＂ is set up for the control of a large-scale power system. The static and dynamic performances of the nonlinear variable structure controller are simulated. The response of system with the controller proposed is compared to that of the nonlinear optimal controller when the system is subjected to a variety of disturbances. Simulation results show that the nonlinear variable structure excitation controller gives more satisfactorily static and dynamic performance and better robustness.
文摘Thermodynamic and kinetic study on TRIP （transformation induced plasticity） steels, cemented carbides and mold steel for plastics were carried out in order to design modern advanced materials. With the sublattice model, equilibrium compositions of ferrite and austenite phases in TRIP steels, as well as volume fraction of austenite at inter-critical temperatures for different time were calculated. Concentration profiles of carbon, manganese, aluminum and silicon in the steels were also estimated in the lattice fixed frame of reference. The effect of Si and Mn on TRIP was discussed according to thermodynamic and kinetic analyses. In order to understand and produce the graded nanophase structure of cemented carbides, miscellaneous phases in the M-Co-C （M= Ti, Ta, Nh） systems and Co-V-C system were modeled. Solution parameters and thermodynamic： properties were listed in detail. The improvement of machining behavior of prehardened mould steel for plastics was obtained by computer-aided composition design. The results showed that the matrix composition of large-section prehardened mould steel for plastic markedly influences the precipitation of non-metallic inclusion and the composition control by the aid of Thermo-Calc software package minimizes the amount of detrimental oxide inclusion. In addition, the modification of calcium was optimized in composition design.
基金the National Natural Science Foundation of China under Grant No.50671061,the Educational Committee Foundation of Shanghai and Baosteel Company.
文摘Phase diagram information of the Fe-C, Fe-Al and Al-C systems are reviewed and the Fe-Al-C system is assessed. A FeAlC database is created by combining a set of thermodynamic parameters established by Kumar and SSOL database in Thermo-Calc software package. Ternary phase diagrams are calculated with FeAIC and the newly developed Thermo-Calc databases SSOL2 and SSOL4. The FeAIC database is the best one to describe the Fe-Al-C system. Al and A3 values on the vertical section containing 1.5 wt pct AI are calculated with the FeAIC database in this work. To validate the thermodynamic calculation, critical temperatures Ac1 and Ac3 are determined by using dilatometer analysis. There exist some errors between the calculated values and the experimental results. So further optimization of the Fe-Al-C system regarding bcc and fcc phases is necessary. The experimental data in this work could be of some value in further optimization.
基金the PhD scholarship,awarded by VITO,and the funding granted by SBO-IWT,IAP(Belspo)the Methusalem long-term financing of the Flemish government
文摘The use of non-equilibrium plasmas for the synthesis of heterogeneous catalysts is a field that has not been explored intensively. The main reasons for the recent increase of research activity in this field are related to the advantages that go with the technique of plasma enhanced chemical vapor deposition （PECVD）. The most principal of these advantages are the possibility to avoid the use of environmentally harmful solvents and the one-step nature of the procedure, making it very time and labor efficient. Non-equilibrium plasma technology, more in particular dielectric barrier discharge （DBD） technology, has been applied in this work for the synthesis of hybrid tin-silicate materials to be used as a heterogeneous catalyst in the isomerization of glucose into fructose. Atomizers, innovative devices which make it possible to inject nanosized precursor liquids into the plasma zone, are used instead of applying vapor phase techniques, where the amount of precursor is limited by the vapor pressure of the liquid. A design of experiments approach has been employed to investigate the effect of the plasma parameters, namely gas flow, frequency and power density, on the catalytic properties of the catalysts within a well-defined parameter field. It has been found that indeed these parameters, together with the molar ratio of Si/Sn, have an important influence on the activity, selectivity, and thus yield of the produced chemicals.
