Effect of MoSi_2 content on dielectric and mechanical properties of MoSi_2/Al_2O_3 composite coatings

Molybdenum disilicide （MoSi2） sheath and aluminum oxide （Al2O3） core blended powders were fabricated by spray drying. A derived coating material was produced for the application as microwave absorbers using the as prepared powders by atmospheric plasma spray （APS） technology. The effects of MoSi2/Al2O3 mass ratio on the dielectric and physical mechanical properties of the composite coatings were investigated. When the MoSi2 content of the composites increases from 0 to 45%, the flexure strength and fracture toughness improve from 198 to 324 MPa and 3.05 to 4.82 MPa-m1/2 then decline to 310 MPa and 4.67 MPa-m1/2, respectively. The dielectric loss tangent increases with increasing MoSi2 content, and the real part of permittivity decreases conversely over the frequency range of 8.2-12.4 GHz. These effects are due to the agglomeration of early molten MoSi2 particles and the increase of the electrical conductivity with increasing MoSi2 content.

The SPH approach to the process of container filling based on non-linear constitutive models

In this work, the transient free surface of con- tainer filling with non-linear constitutive equation＇s fluids is numerically investigated by the smoothed particle hydrody- namics （SPH） method. Specifically, the filling process of a square container is considered for non-linear polymer fluids based on the Cross model. The validity of the presented SPH is first verified by solving the Newtonian fluid and Oldroyd- B fluid jet. Various phenomena in the filling process are shown, including the jet buckling, jet thinning, splashing or spluttering, steady filling. Moreover, a new phenomenon of vortex whirling is more evidently observed for the Cross model fluid compared with the Newtonian fluid case.

Simulation of the coarsening behavior of intermetallic precipitates in Ni_(75)Al_xV_(25-x) alloys

The coarsening behavior of L12 and D022 in Ni75AlxV25-x （x,at.%） alloys including coherent strain was investigated using the microscopic phase-field model. The simulation results indicate that the shape transition and spatial correlation of L12 and D022 are caused by the morphological-dependent anisotropic elastic interactions in the system. The coarsening process of the particles is by means of neighbor particles impingement and aggregation into larger ones. For the strain-induced interactions between the precipitates,the LSW theory is altered for the coarsening behavior of L12 and D022. In addition,the simulation reveals that the growth and coarsening of D022 present two obvious stages at lower Al concentration regions and proceed simultaneously at high Al concentration regions. The growth and coarsening processes of L12 at the same regions is reverse to those of D022.

Robust identification for multi_section freeway traffic models

Since it is difficult to fit measured parameters using the conventional traffic model, a new traffic density and average speed model is introduced in this paper. To determine traffic model structures accurately, a model identification method for uncertain nonlinear system is developed. To simplify uncertain nonlinear problem, this paper presents a new robust criterion to identify the multi-section traffic model structure of freeway efficiently. In the new model identification criterion, numerically efficient U-D factofization is used to avoid computing the determinant values of two complex matrices. By estimating the values of U-D factor of data matrix, both the upper and lower bounds of system uncertainties are described. Thus a model structure identification algorithm is proposed. Comparisons between identification outputs and simulation outputs of traffic states show that the traffic states can be accurately predicted by means of the new traffic models and the structure identification criterion.

A Modified SOFM Method for Point Cloud Segmentation in Reverse Engineering

The purpose of reverse engineering is to convert a large point cloud into a CAD model. In reverse engineering, the key issue is segmentation, i.e. studying how to subdivide the point cloud into smaller regions, where each of them can be approximated by a single surface. Segmentation is relatively simple, if regions are bounded by sharp edges and small blends; problems arise when smoothly connected regions need to be separated. In this paper, a modified self-organizing feature map neural network （SOFM） is used to solve segmentation problem. Eight dimensional feature vectors （3-dimensional coordinates, 3-dimensional normal vectors, Gaussian curvature and mean curvature） are taken as input for SOFM. The weighted Euclidean distance measure is used to improve segmentation result. The method not only can deal with regions bounded by sharp edges, but also is very efficient to separating smoothly connected regions. The segmentation method using SOFM is robust to noise, and it operates directly on the point cloud. An examples is given to show the effect of SOFM algorithm.

Translation Quality Assessment： Bridge the Gap between Theory and Practice

Translation Quality Assessment （TQA） is a central concern for both academic research and translation practice. Yet consensus on the issue has almost never been reached among theorists and practitioners. In this paper, a detailed comparison between academic and professional assessment has been made mainly in terms of text type, assessment criteria and models. It is believed that a ＂one size fits all＂ model across academy and industry is neither possible nor necessary. However, the gaps in between could be narrowed down by increasing communication and cooperation between theorists and practitioners, who are advised to turn their focus to translator＇s competence and evaluation process.

The liquid phase separation of Bi-Ga hypermonotectic alloy under acoustic levitation condition

Containerless treatment of Bi-58.5at%Ga hypermonotectic alloy is successfully performed with acous-tic levitation technique. Under acoustic levitation condition,the second phase (Ga) distributes almost homogeneously in solidification sample,opposite to macrosegregation in solidification sample under conventional condition. Stokes motion of the second liquid droplet (Ga) is significantly restrained un-der acoustic levitation condition. The analyses indicate that the melt vibration in the gravity direction forced by acoustic field can induce steady flow around the second liquid droplet,which influences droplet shape during its moving upward and consequently restrains Stokes motion velocity of the second liquid droplet.

THE YIELDING BEHAVIOR OF MATERIALS WITH RANDOM VOIDS

The unit cell model proposed by Gurson can only describe the yielding behavior of some materials with voids having typical structures, and therefore it is unrealistic. Oyane, Lee also put forward some other yielding criteria for porous materials, but some ambiguous parameters have been introduced into their criteria, so the application of these criteria is limited.

Electromagnetic behavior of two-dimensional quasi-crystal left-handed materials with dendritic unit

We demonstrated a two-dimensional quasi-crystal dendritic structure model with negative permeability.The microwave transmission and reflection properties of periodic and quasi-crystal dendritic structure mediums with varied angle incidence were measured.The results showed that the resonant peaks of quasi-crystal negative permeability samples and left-handed samples had tiny shift with the altering of incident angle.Because of the influence of coupling between quasi-crystal dendritic cells,the resonance of the entire material was enhanced or weakened.The quasi-crystal dendritic structure model will provide an easy method to design isotropic left-handed materials(LHMs).

Nonlinear instability and dynamic bifurcation of a plane interface during solidification

By taking average over the curvature, the temperature and its gradient, the solute concentration and its gradient at the flange of planar interface perturbed by sinusoidal ripple during solidification, the nonlinear dynamic equations of the sinusoidal perturbation wave have been set up. Analysis of the nonlinear instability and the behaviors of dynamic bifurcation of the solutions of these equations shows that (i) the way of dynamic bifurcation of the flat-to-cellular interface transition varies with different thermal gradients. The quasi-subcritical-lag bifurcation occurs in the small interface thermal gradient scope, the supercritical-lag bifurcation in the medium thermal gradient scope and the supercritical bifurcation in the large thermal gradient scope. (ii) The transition of cellular-to-flat interface is realized through supercritical inverse bifurcation in the rapid solidification area.