Numerical Analysis of Permeability of Functionally Graded Scaffolds

In this work,we numerically study the hydrodynamic permeability of new-generation artificial porous materials used as scaffolds for cell growth in a perfusion bioreactor.We consider two popular solid matrix designs based on triply periodic minimal surfaces,the Schwarz P(primitive)and D(diamond)surfaces,which enable the creation of materials with controlled porosity gradients.The latter property is crucial for regulating the shear stress field in the pores of the scaffold,which makes it possible to control the intensity of cell growth.The permeability of functionally graded materials is studied within the framework of both a microscopic approach based on the Navier-Stokes equation and an averaged description of the liquid filtration through a porous medium based on the equations of the Darcy or Forchheimer models.We calculate the permeability coefficients for both types of solid matrices formed by Schwarz surfaces,study their properties concerning forward and reverse fluid flows,and determine the ranges of Reynolds number for which the description within the Darcy or Forchheimer model is applicable.Finally,we obtain a shear stress field that varies along the sample,demonstrating the ability to tune spatially the rate of tissue growth.

Impacts of interactions with low-mineralized water on permeability and pore behavior of carbonate reservoirs

Laboratory filtration experiments are employed to investigate effective well killing while minimizing its impacts on surrounding rocks.The novelty of this experimental study lies in the prolonged exposure of rock samples to the killing fluid for seven days,corresponding to the average duration of well workovers in the oilfields in Perm Krai,Russia.Our findings indicate that critical factors influencing the interactions between rocks and the killing fluid include the chemical composition of the killing fluid,the mineralogical composition of the carbonate rocks,reservoir pressure and temperature,and the contact time.Petrophysical analyses using multi-scale X-ray computed tomography,field emission scanning electron microscopy,and X-ray diffraction were conducted on samples both before and after the well killing simulation.The experiments were performed using real samples of cores,crude oil,and the killing fluid.The results from this study indicate that low-mineralized water(practically fresh water)is a carbonate rock solvent.Such water causes the dissolution of rock components,the formation of new calcite crystals and amoeba-like secretions,and the migration of small particles(clay,quartz,and carbonates).The formation of deep channels was also recorded.The assessment reveals that the change in the pH of the killing fluid indicates that the observed mineral reactions were caused by carbonate dissolution.These combined phenomena led to a decrease in the total number of voids in the core samples,which was 25%on average,predominantly among voids measuring between 45 and 70μm in size.The change in the pore distribution in the bulk of the samples resulted in decreases in porosity of 1.8%and permeability of 67.0%in the studied core samples.The results from this study indicate the unsuitability of low-mineralized water as a well killing fluid in carbonate reservoirs.The composition of the killing fluid should be optimized,for example,in terms of the ionic composition of water,which we intend to investigate in future research.

Experimental and Numerical Assessment of the Influence of Bottomhole Pressure Drawdown on Terrigenous Reservoir Permeability and Well Productivity

During oil and gas fields development,a decrease in reservoir and bottomhole pressure has often a detrimental effect on reservoir properties,especially permeability.This study presents the results of laboratory tests conducted to determine the response of terrigenous reservoir core-sample permeability to changes in the effective stresses and a decrease in the reservoir pressure.The considered samples were exposed for a long time to a constant high effective stress for a more reliable assessment of the viscoplastic deformations.According to these experiments,the decrease of the core samples permeability may reach 21%with a decrease in pressure by 9.5 MPa from the initial reservoir conditions.Numerical simulations have been also conducted.These have been based on the finite element modeling of the near-wellbore zone of the terrigenous reservoir using poroelasticity relations.The simulation results show a limited decrease in reservoir permeability in the near-wellbore zone(by 17%,which can lead to a decrease in the well productivity by 13%).

Linear and Non-Linear Dynamics of Inertial Waves in a Rotating Cylinder with Antiparallel Inclined Ends

This work is devoted to the experimental study of inertial wave regimes in a non-uniform rotating cylinder with antiparallel inclined ends.In this setting,the cross-section of the cylinder is divided into two regions where the fluid depth increases or decreases with radius.Three different regimes are found:inertial wave attractor,global oscillations(the cavity’s resonant modes)and regime of symmetric reflection of wave beams.In linear wave regimes,a steady single vortex elongated along the rotation axis is generated.The location of the wave’s interaction with the sloping ends determines the vortex position and the vorticity sign.In non-linear regimes several pairs of the triadic resonance subharmonics are detected simultaneously.The instability of triadic resonance is accompanied by the periodic generation of mean vortices drifting in the azimuthal direction.Moreover,the appearance frequency of the vortices is consistent with the low-frequency subharmonic of the triadic resonance.The experimental results shed light on the mechanisms of the inertial wave interaction with zonal flow and may be useful for the development of new methods of mixing.

Dynamically triggered seismicity on a tectonic scale:A review

Earthquakes triggered by dynamic disturbances have been confirmed by numerous observations and experiments.In the past several decades,earthquake triggering has attracted increasing attention of scholars in relation to exploring the mechanism of earthquake triggering,earthquake prediction,and the desire to use the mechanism of earthquake triggering to reduce,prevent,or trigger earthquakes.Natural earthquakes and large‐scale explosions are the most common sources of dynamic disturbances that trigger earthquakes.In the past several decades,some models have been developed,including static,dynamic,quasi‐static,and other models.Some reviews have been published,but explosiontriggered seismicity was not included.In recent years,some new results on earthquake triggering have emerged.Therefore,this paper presents a new review to reflect the new results and include the content of explosion‐triggered earthquakes for the reference of scholars in this area.Instead of a complete review of the relevant literature,this paper primarily focuses on the main aspects of dynamic earthquake triggering on a tectonic scale and makes some suggestions on issues that need to be resolved in this area in the future.

Influence of Methane-Hydrogen Mixture Characteristics on Compressor Vibrations

A transition to clean hydrogen energy will not be possible until the issues related to its production, transportation,storage, etc., are adequately resolved. Currently, however, it is possible to use methane-hydrogen mixtures.Natural gas can be transported using a pipeline system with the required pressure being maintained by gascompression stations. This method, however, is affected by some problems too. Compressors emergency stopscan be induced by vibrations because in some cases, mechanical methods are not able to reduce the vibrationamplitude. As an example, it is known that a gas-dynamic flow effect in labyrinth seals can lead to increasedvibrations. This paper presents the numerical simulation of rotor oscillations taking into account a gas-dynamicload. The influence of a transported mixture on the oscillatory process is investigated. Mixtures consisting ofmethane and hydrogen in various proportions and an air mixture are considered. The results are discussed forvarious operating pressures and include the rotor motion trajectories and oscillation frequency spectra obtainednumerically. It is shown that the gas mixture composition has a significant effect on the oscillations and theiroccurrence. Hydrogen as a working fluid reduces the vibration amplitude. Operating a compressor with hydrogenleads to a decrease in the resonant frequency, bringing it closer to the operating one. However, the operatingpressure at which maximum oscillations are observed depends slightly on the gas mixture composition.

Applying the Shearlet-Based Complexity Measure for Analyzing Mass Transfer in Continuous-Flow Microchannels

Continuous-flow microchannels are widely employed for synthesizing various materials,including nanoparticles,polymers,and metal-organic frameworks(MOFs),to name a few.Microsystem technology allows precise control over reaction parameters,resulting in purer,more uniform,and structurally stable products due to more effective mass transfer manipulation.However,continuous-flow synthesis processes may be accompanied by the emergence of spatial convective structures initiating convective flows.On the one hand,convection can accelerate reactions by intensifying mass transfer.On the other hand,it may lead to non-uniformity in the final product or defects,especially in MOF microcrystal synthesis.The ability to distinguish regions of convective and diffusive mass transfer may be the key to performing higher-quality reactions and obtaining purer products.In this study,we investigate,for the first time,the possibility of using the information complexity measure as a criterion for assessing the intensity of mass transfer in microchannels,considering both spatial and temporal non-uniformities of liquid’s distributions resulting from convection formation.We calculate the complexity using shearlet transform based on a local approach.In contrast to existing methods for calculating complexity,the shearlet transform based approach provides a more detailed representation of local heterogeneities.Our analysis involves experimental images illustrating the mixing process of two non-reactive liquids in a Y-type continuous-flow microchannel under conditions of double-diffusive convection formation.The obtained complexity fields characterize the mixing process and structure formation,revealing variations in mass transfer intensity along the microchannel.We compare the results with cases of liquid mixing via a pure diffusive mechanism.Upon analysis,it was revealed that the complexity measure exhibits sensitivity to variations in the type of mass transfer,establishing its feasibility as an indirect criterion for assessing mass transfer intensity.The method presented can extend beyond flow analysis,finding application in the controlling of microstructures of various materials(porosity,for instance)or surface defects in metals,optical systems and other materials that hold significant relevance in materials science and engineering.

Phase Transition in a Dense Swarm of Self-Propelled Bots

Swarms of self-organizing bots are becoming important elements in various technical systems,which include the control of bacterial cyborgs in biomedical applications,technologies for creating new metamaterials with internal structure,self-assembly processes of complex supramolecular structures in disordered media,etc.In this work,we theoretically study the effect of sudden fluidization of a dense group of bots,each of which is a source of heat and follows a simple algorithm to move in the direction of the gradient of the global temperature field.We show that,under certain conditions,an aggregate of self-propelled bots can fluidize,which leads to a second-order phase transition.The bots’program,which forces them to search for the temperature field maximum,acts as an effective buoyancy force.As a consequence,one can observe a sudden macroscopic circulation of bots from the edge of the group to its center and back again,which resembles classical Rayleigh-Benard thermal convection.In the continuum approximation,we have developed a mathematical model of the phenomenon,which reduces to the equation of a self-gravitating porous disk saturated with an incompressible fluid that generates heat.We derive governing equations in the Darcy-Boussinesq approximation and formulate a nonlinear boundary value problem.An exact solution to the linearized problem for infinitesimal perturbations of the base state is obtained,and the critical values of the control parameter for the onset of the bot circulation are calculated.Then we apply weakly nonlinear analysis using the method of multiple time scales.We found that as the number of bots increases,the swarm exhibits increasingly complex patterns of circulation.

两亲聚合物设计合成及其增效体系研究(Ⅵ)——两亲聚合物乳化作用

综述了近年来两亲聚合物乳化作用的研究现状,主要包括不同结构两亲聚合物对乳化性能的影响。包括疏水基团、甜菜碱基团及复配体系对乳化的影响。总结了典型两亲聚合物乳状液的稳定机理,分析了两亲聚合物乳状液的渗流特性及对提高采收率的影响,为增强两亲聚合物乳化作用方法及乳化提高采收率机理奠定理论基础并明确发展方向。

Flotation separation of wolframite from calcite using a new trisiloxane surfactant as collector

Since wolframite is usually associated with calcite,the separation and enrichment of wolframite by froth flotation remains a great challenge.Herein,a novel trisiloxane surfactant N-(2-aminoethyl)-3-ami nopropyltrisiloxane(AATS)was successful synthesized,which was used for the separation of wolframite from calcite for the first time.The flotation separation performance of AATS was studied by flotation test,and its adsorption mechanism was explored based on contact angle,infrared spectrum analysis(FTIR),zeta potential and density functional theory(DFT)calculation.The results of microflotation test and binary mixed ore flotation test pointed that AATS had excellent selectivity and more prominent collection capacity for the flotation of wolframite when compared with industrial reagent sodium oleate(NaOL).The measurement results of contact angle proved that AATS improved the hydrophobicity of the wolframite surface.The highly selective adsorption mechanism of AATS surfactant on mineral surfaces were further researched and analyzed by FTIR and zeta potential.The results revealed that AATS surfactant had significant adsorption effect on wolframite,yet almost no adsorption on calcite.DFT calculation indicated that AATS produced electrostatic adsorption with wolframite surface through—N+H3 group.

Numerical simulation of fracture propagation in Russia carbonate reservoirs during refracturing

Refracturing treatment is often performed on Russian carbonate reservoirs because of the quick production decline of reservoirs.The traditional refracturing model assumes that a refracture initiates in the normal direction relative to the initial hydro-fracture.This assumption is inconsistent with oilfield measurements of refracture propagation trajectories.Indeed,the existing model is not based on an indepth understanding of initiation and propagation mechanisms of the second hydraulic fractures during refracturing.In this study,we use the extended finite element method to investigate refracture propagation paths at different initiation angles.Both the enriched function approach and phantom mode technique are incorporated into the refracturing model,thereby ensuring that the refracture can freely extend on the structured mesh without any refinement near the crack tips.Key factors including production time,stress anisotropy and initiation angle,and the propped mechanical effect are analyzed in detail.This study provides new insight into the mechanism of refracture propagation in unconventional reservoirs.

Thermal Stresses and Theorem on Decomposition

The thermal expansion strain is considered as a special case of eigenstrain.The authors proved the theorem on decomposition of eigenstrain existing in a body into two constituents:Impotent eigenstrain(not causing stress in any point of a body)and nilpotent eigenstrain(not causing strain in any point of a body).According to this theorem,the thermal stress can be easily found through the nilpotent eigenstrain.If the eigenstrain is an impotent one,the thermal stress vanishes.In this case,the eigenstrain must be compatible.The authors suggest a new approach to measure of eigenstrain incompatibility and hence to estimate of thermal stresses.

Modeling of Crack Development Associated with Proppant Hydraulic Fracturing in a Clay-Carbonate Oil Deposit

Survey and novel research data are used in the present study to classify/identify the lithological type of Verey age reservoirs’rocks.It is shown how the use of X-ray tomography can clarify the degree of heterogeneity,porosity and permeability of these rocks.These data are then used to elaborate a model of hydraulic fracturing.The resulting software can take into account the properties of proppant and breakdown fluid,thermal reservoir conditions,oil properties,well design data and even the filtration and elastic-mechanical properties of the rocks.Calculations of hydraulic fracturing crack formation are carried out and the results are compared with the data on hydraulic fracturing crack at standard conditions.Significant differences in crack formation in standard and lithotype models are determined.It is shown that the average width of the crack development for the lithotype model is 2.3 times higher than that for the standard model.Moreover,the coverage of crack development in height for the lithotype model is almost 2 times less than that for the standard model.The estimated fracture half-length for the lithotype model is 13.3%less than that of for the standard model.A higher dimensionless fracture conductivity is also obtained for the lithotype model.It is concluded that the proposed approach can increase the reliability of hydraulic fracturing crack models.

Assessment of the Elastic-Wave Well Treatment in Oil-Bearing Clastic and Carbonate Reservoirs

A set of techniques for well treatment aimed to enhance oil recovery are considered in the present study.These are based on the application of elastic waves of various types(dilation-wave,vibro-wave,or other acoustically induced effects).In such a context,a new technique is proposed to predict the effectiveness of the elastic-wave well treatment using the rank distribution according to Zipf’s law.It is revealed that,when the results of elastic wave well treatments are analyzed,groups of wells exploiting various geological deposits can differ in terms of their slope coefficients and free members.As the slope coefficient increases,the average increase in the well oil production rate(after the well treatment)becomes larger.An equation is obtained accordingly for estimating the slope coefficient in the Zipf’s equation from the frequency of the elastic wave.The obtained results demonstrate the applicability of the Zipf’s law in the analysis of the technological efficiency of elastic-wave well treatment methods.

An Integrated Oil Production Enhancement Technology Based on Waterflooding Energy Recovery

A new integrated oil production enhancement technology based on water-flooding energy recovery is proposed.After providing an extensive review of the existing scientific and technical literature on this subject,the proposed integrated technology is described together with the related process flow diagram,the criteria used to select a tar-get facility for its implementation and the outcomes of the laboratory studies conducted to analyze emulsion formation and separation kinetics.Moreover,the outcomes of numerical simulations performed using Ansys CFX software are also presented.According to these results,using the proposed approach the incremental oil production may reach 1.2 t/day(with a 13%increase)and more,even at low flow rates(less than 10 t/day),thereby providing evidence for the benefits associated with this integrated technology.

Application of Epoxy Coatings to Increase the Efficiency of Wax Oils Production

When producing hydrocarbons,an important task relates to the optimization of the stock of the producing well.The main complications for wells in non-working mode are represented by the formation of asphalt-resinparaffin deposits.This issue is one of the most common problems in the production and transportation of oil.A promising method to deal with these deposits is the application of smooth coatings made of epoxy polymers on the inner surface of the production well tubing.In this work,a number of laboratory studies were carried out on the“Cold Finger”installation to assess the effectiveness of this approach.These laboratory studies have shown that the efficiency related to smooth coatings is 27%while the resulting thermal conductivity ranges from 0.259 to 0.279 W/(m°C).These results demonstrate that this technology can reduce the amount of organic deposits and increase the temperature of oil.

Selective Laser Melting under Variable Ambient Pressure: A Mesoscopic Model and Transport Phenomena

Recent reports on the selective laser melting(SLM)process under a vacuum or low ambient pressure have shown fewer defects and better surface quality of the as-printed products.Although the physical process of SLM in a vacuum has been investigated by high-speed imaging,the underlying mechanisms governing the heat transfer and molten flow are still not well understood.Herein,we first developed a mesoscopic model of SLM under variable ambient pressure based on our recent laser-welding studies.We simulated the transport phenomena of SLM 316L stainless steel powders under atmospheric and 100 Pa ambient pressure.For typical process parameters(laser power:200W;scanning speed:2m∙s^(-1);powder diameter:27 lm),the average surface temperature of the cavity approached 2800 K under atmospheric pressure,while it came close to 2300 K under 100 Pa pressure.More vigorous fluid flow(average speed:4m∙s^(-1))was observed under 100 Pa ambient pressure,because the pressure difference between the evaporation-induced surface pressure and the ambient pressure was relatively larger and drives the flow under lower pressure.It was also shown that there are periodical ripple flows(period:14ls)affecting the surface roughness of the as-printed track.Moreover,the molten flow was shown to be laminar because the Reynolds number is less than 400 and is far below the critical value of turbulence;thus,the viscous dissipation is significant.It was demonstrated that under a vacuum or lower ambient pressure,the ripple flow can be dissipated more easily by the viscous effect because the trajectory length of the ripple is longer;thus,the surface quality of the tracks is improved.To summarize,our model elucidates the physical mechanisms of the interesting transport phenomena that have been observed in independent experimental studies of the SLM process under variable ambient pressure,which could be a powerful tool for optimizing the SLM process in the future.

Estimation of the Temperature in the Weld Penetration Channel in Electron Beam Welding

In this paper, the method of experimental estimation of the temperature in a penetration channel in electron beam welding is described on the basis of chemical elements concentration in the vapors above welding zone. The temperature of a vapor-gas phase in the penetration channel is determined when equating calculated and experimental concentrations of the elements.

Contemporary Marxism and Post-industrial Economy

Karl Marx （1973） scientifically predicted the appearance of some extraordinary tendencies of social development in the second half of the 20th century was given a common name of post-industrial or informational society and interpreted as post-bourgeois, post-capitalist, post-business society, and late capitalism. Autonomist Marxism and Perm philosophy school had separately come to a conclusion that all the phenomena noticed by the post-industrial theory could be adequately explained if we consider the historically new form of material labour appearing now. Marx （1973）, who predicted this new form, named it automated, scientific, or universal labour. With the appearance of the universal labour, the wealth of the society depends on the universal human powers that help to involve the extensive powers of nature into the production process. Universal labour can not be averaged or measured by the labour time as the abstract labour; it implies high complexity and creativity. Involving increasingly powerful forces of nature and human society, it appears to be the labour of another essence and by its essence, it does not create value.

The Relative Viscosity of Concentrated Rubber Suspensions and Viscoelastic Modulus of 3D Сross-Linked Elastomers Filled with Solid Particles

For the first time, this paper describes the concentration dependence of the relative dynamic viscosity coefficient of rubber suspensions and the initial viscoelastic modulus of 3D cross-linked elastomers on the maximum volume filling with solid polydisperse particles. It allows to predict the rheological and mechanical properties of the polymer compositions being developed now. In this paper, we present the first experimental study of the pole of the concurrent lines of the concentration dependence in the coordinates of the linear form. The pole validates the invariant value of the constant of the developed equation and allows the experimental determination of the maximum volume filling of polymer binders filled with separate fractions or polydisperse mixtures. The results of the study are recommended for use in developing new polymer composite materials.