Thermal diffusivity of light-emitting diode packaging material determined by photoacoustic piezoelectric technique

Thermal property is one of the most important properties of light-emitting diode （LED）. Thermal property of LED packaging material determines the heat dissipations of the phosphor and the chip surface, accordingly having an influence on the light-emitting efficiency and the life-span of the device. In this paper, photoacoustic piezoelectric （PAPE） technique has been employed to investigate the thermal properties of polyvinyl alcohol （]？VA） and silicon dioxide, which are the new and the traditional packaging materials in white LED, respectively. Firstly, the theory of PAPE technique has been developed for two-layer model in order to investigate soft materials; secondly, the experimental system has been set up and adjusted by measuring the reference sample; thirdly, the thermal diffusivities of PVA and silicon dioxide are measured and analysed. The experimental results show that PVA has a higher thermal diffusivity than silicon dioxide and is a better packaging material in the sense of thermal diffusivity for white LED.

Adsorption-controlled transition of the electrical properties realized in Hematite(alpha-Fe_2O_3) nanorods ethanol sensing

Alpha-Fe203 nanorods are synthesized through a hydrotherrnal method with no surfactant introduced and ethanol sensors are fabricated from these nanorods. The device can respond to ethanol vapour in a concentration range from 1 to 1500 parts per million and shows both p-type and n-type responding characteristics during the investigation of the ethanol sensing. The sensor displays a p-type characteristic when the ethanol concentration is low and converted into an n-type characteristic as the concentration exceeds a certain value. Such a phenomenon is attributed to the chemisorbed oxygen, which leads to different modifications of the energy band at the surface, namely, depletion layer or inversion layer.

Synthesis of a novel organic nonlinear optical chromophore and the Testing for μ_gβ Value

A novel second-order nonlinear optical chromophore （DCDHF-2-V） was synthesized from 3-Hydroxy-3-methyl-2-butanae, propanedinitrile and 4-diethylaminobenzaldehyde by aldol condensation reaction. Molecular structural characterization was investigated by elemental analysis, FTIR, and 1H-NMR spectra. The melting point obtained from DSC thermogram was almost 251 ℃, and the compound shows a thermal stability up to 270 ℃. Second-order NLO properties of the chromophore were measured by solvatochromic method. From the quantum-mechanical two-level model, it can be obtained that the μgβ value of DCDHF-2-V is 6520×10^-48esu atthe wavelength of 1064 nm.

Moving Target Detection and Tracking for Smartphone Automatic Focusing

In this paper,a non-contact auto-focusing method is proposed for the essential function of auto-focusing in mobile devices.Firstly,we introduce an effective target detection method combining the 3-frame difference algorithm and Gauss mixture model,which is robust for complex and changing background.Secondly,a stable tracking method is proposed using the local binary patter feature and camshift tracker.Auto-focusing is achieved by using the coordinate obtained during the detection and tracking procedure.Experiments show that the proposed method can deal with complex and changing background.When there exist multiple moving objects,the proposed method also has good detection and tracking performance.The proposed method implements high efficiency,which means it can be easily used in real mobile device systems.

Dynamic modulation in graphene-integrated silicon photonic crystal nanocavity

Silicon-based electro-optic modulators are the key devices in integrated optoelectronics. Integration of the graphene layer and the photonic crystal(PC) cavity is a promising way of achieving compact modulators with high efficiency. In this paper, a high-quality(Q) acceptor-type PC nanocavity is employed to integrate with a single-layer graphene for realizing strong modulation. Through tuning the chemical potential of graphene, a large wavelength shift of 2.62 nm and a Q factor modulation of larger than 5 are achieved. A modulation depth(12.8 dB) of the reflection spectrum is also obtained.Moreover, the optimized PC nanocavity has a large free spectral range of 131.59 nm, which can effectively enhance the flexibility of the modulator. It shows that the proposed graphene-based PC nanocavity is a potential candidate for compact,high-contrast, and low-power absorptive modulators in integrated silicon chips.

Fiber-Optic Solution Concentration Sensor Based on a Pressure-Induced Long-Period Grating in a Composite Waveguide

A fiber-optic solution concentration sensor based on a pressure-induced long-period grating(LPG)in a composite optical waveguide is proposed.The composite waveguide consists of a standard single-mode fiber with its coating stripped away,a teflon-cannula and the medium to be measured.An experiment has been carried out to measure the concentration of the sodium chloride(NaCl)solution.The results show that the central resonant wavelengths of the LPG shift towards shorter wavelengths when the concentration of the NaCl solution increases.The central resonant wavelength of the LP_(14) cladding mode exhibits a total blue shift of 4.13 nm in the NaCl solution concentration range of 0–25%,which corresponds to a sensing sensitivity of 0.17 nm/%.

Acceleration feedback of a current-following synchronized control algorithm for telescope elevation axis

This paper proposes a dual-motor configuration to enhance closed-loop performance of a telescope control system. Two identical motors are mounted on each side of a U-type frame to drive the telescope elevation axis instead of a single motor drive, which is usually used in a classical design. This new configuration and mechanism can reduce the motor to half the size used in the former design, and it also provides some other advantages. A master-slave current control mode is employed to synchronize the two motors. Acceleration feedback control is utilized to further enhance the servo performance. Extensive experiments are used to validate the effectiveness of the proposed control algorithm in synchronization, disturbance attenuation and low-velocity tracking.

Influence of HF catalyst on the microstructure properties of ultra low-k thin films prepared by sol-gel method

This paper reports that by using the hydrofluoric acid （HF） as the acid catalyst, F doped nanoporous low-k SiO2 thin films have been prepared by means of sol-gel method. The characterization of atomic force microscopy and Fourier transform infrared spectroscopy demonstrates that the HF catalyzed films are more hydrophobic. The N2 adsorption/desorption experiments show that the suited introduction of HF increases the porosity and decreases the pore size distribution （about 10 nm） in the films. The above results indicate that the hydrofluoric acid is the more suitable acid catalyst than the hydrochloric one for preparing nanoporous ultra low-k SiO2 thin films.

High-Power Continuous-Wave and Acousto-Optical Q-Switched Ho:(Sc_(0.5)Y_(0.5))_2SiO_5 Laser Pumped by Laser Diode

We experimentally investigate the continuous-wave(cw)and acousto-optical(AO)Q-switched performance of a diode-pumped Ho:(Sc_(0.5)Y_(0.5))_2SiO_5(Ho:SYSO)laser.A fiber-coupled laser diode at 1.91m is employed as the pump source.The cw Ho:SYSO laser produces 13.0 W output power at 2097.9 nm and 56.0%slope efficiency with respect to the absorbed pump power.In the AO Q-switched regime,at a pulse repetition frequency of 5 kHz,the Ho:SYSO laser yields 2.1 mJ pulse energy and 21 ns pulse width,resulting in a calculated peak power of 100 k W.In addition,at the maximum output level,the beam quality factor of the Q-switched Ho:SYSO laser is measured to be about 1.6.

Stable Q-Switched Yb:NaY（WO4）2 Laser with Cr4+:YAG Saturable Absorber

The passively Q-switched Yb：NaY（W04）2 （Yb：NaYW） laser is studied. By using Cr^4＋ ： yAG as the saturable absorber, a very stable pulse train is obtained. At a high pump power, the pulse to pulse timing jitter is measured to be less than 2% and the amplitude fluctuation is less than 4%. A Q-switched average output power of 2.3 W at 1029 nm is generated with a slope efficiency of 33.9%; the one-dimensional intensity distribution of the laser facula is of the Gaussian type. The output repetition rate, pulse energy, pulse width and peak power are 33.3 kHz, 70μJ, 36 ns and 2.0 k W, respectively. The passively Q-switched process is simulated by solving the rate equations, the simulated results are in good agreement with the experimental data.

Single,composite,and ceramic Nd:YAG 946-nm lasers

Single, composite crystal and ceramic continuous wave （CW） 946-nm Nd：YAG lasers are demonstrated, respectively. The ceramic laser behaves better than the crystal laser. With 5-mm long ceramic, a CW output power of 1.46 W is generated with an optical conversion efficiency of 13.9%, while the slope efficiency is 17.9%. The optimal ceramic length for a 946- nm laser is also calculated.

Optical properties of the two-port resonant tunneling filters in two-dimensional photonic crystal slabs

We have designed and fabricated two types of two-port resonant tunneling filters with a triangular air-hole lattice in two-dimensional photonic crystal slabs. In order to improve the filtering efficiency, a feedback method is introduced by closing the waveguide. It is found that the relative position between the closed waveguide boundary and the resonator has an important impact on the dropping efficiency. Based on our analyses, two different types of filters are designed. The transmission spectra and scattering-light far-field patterns are measured, which agree well with theoretical prediction. In addition, the resonant filters are highly sensitive to the size of the resonant cavities, which are useful for practical applications.

Controlling the self-collimation characteristics of a near-infrared two-dimensional metallic photonic crystal

Self-collimation characteristics of the two-dimensional square-lattice photonic crystal （PC） consisting of metal rods immersed in silicon are studied by the finite-difference time-domain method. The Drude dispersion model is adopted to describe the metal rod, and the self-collimation behaviours of the near-infrared light through the PC are studied. The frequency region and the tolerance of incident angle for the self-collimation behaviour can be controlled by changing the shape of the metal rods.

Evidence for a High-Pressure Isostructural Transition in Nitrogen

We observed an isostructural phase transition in the solid nitrogen λ-N_(2) at approximately 50 GPa accompanied by anomalies in lattice parameters,atomic volume and Raman vibron modes.The anomalies are ascribed to a slight reorientation of the nitrogen molecules,which does not seem to affect the monoclinic symmetry(space group P2_(1)/c).Our ab initio calculations further confirm the phenomena,and suggest an optimized structure for the λ-N_(2) phase.In addition,a new high-pressure amorphous phase of η′-N_(2) was also discovered by a detailed investigation of the pressure-temperature phase diagram of nitrogen with the aim of probing the phase stability of λ-N_(2).Our result may provide helpful information about the crystallographic nature of dissociation transitions in diatomic molecular crystals(H_(2),O_(2),N_(2),etc).

Continuous-wave Nd:KGd(WO4)2 single-longitudinal-mode laser

A continuous-wave Nd:KGd(WO4)2 single-longitudinal-mode laser is demonstrated with Fabry-Perot etalons in a simple linear cavity.The thermal lens effect is dramatically lowered by propagating the laser beam along the‘athermal’direction inside the laser crystal,which is very beneficial to removing the heat generated in the mode selection process.The maximum single-longitudinal-mode output power obtained is 64.8 mW at incident pump power of 4.7 W,corresponding to an optical conversion efficiency of 1.3%and a slope efficiency of 1.7%.

A new transition metal diphosphideα-MoP_(2) synthesized by a high-temperature and high-pressure technique

Monoclinicα-MoP_(2),with the OsGe2-type structure(space group C2/m,Z=4)and lattice parameters a=8.7248(11)Å,b=3.2322(4)Å,c=7.4724(9)Å,andβ=119.263°,was synthesized under a pressure of 4~GPa at a temperature between 1100℃and 1200℃.The structure ofα-MoP_(2) and its relationship to other transition metal diphosphides are discussed.Surprisingly,the ambient pressure phase orthorhombicβ-MoP_(2)(space group Cmc21)is denser in structure thanα-MoP_(2).Room-temperature high-pressure x-ray diffraction studies exclude the possibility of phase transition fromβ-MoP_(2) to α-MoP_(2),suggesting thatα-MoP_(2) is a stable phase at ambient conditions;this is also supported by the total energy and phonon calculations.

Design and Analysis of Ring Resonator with Thermal Tuning

A type of waveguide ring resonator, based on Er3+/Yb3+ co-doped phosphate glass and using thermal-optical effect as tuning manner, is brought up. The ring resonator is composed of two straight waveguides and a ring waveguide with radius of 400 μm. Electrode is evaporated on the top of the waveguide to achieve thermal tuning. Firstly, the filtering scheme of the ring resonator is analyzed, then how parameters of the electrode influence the filtering characteristics is discussed.

Development of a four-channel cardiovascular signals collector based on STM32 with digital-controlled gain

To get better methods on diagnosis of cardiovascular diseases and health assessment by comparison analysis of four kinds of cardiovascular signals, which are blood pressure signal (BPS), plus wave signal (PWS), electrocardiosignal (ECS) and cardiac sound signal (CSS), a four-channel signals collector is introduced in this article. This collector is composed of microcomputer STM32F103RB with integrated 12-bit analog to digital converters (ADCs) and some integrated chips (IC) such as PGA113, a programmable gain amplifier with internal calibration channels for system-level calibration. Therefore, the data of four kinds of cardiovascular signals can be both collected by this signal collector with a high precision and output to a computer by universal serial bus (USB) interface, which can also offers power for this instrument. In addition, the gain of input signal can be changed by computer software through USB interface under microchip commands. Thus it has many merits, such as the small volume, low cost, high performance and precision, digital-controlled gain and so on. Consequently, it is convenient to acquire the data of four kinds of cardiovascular signals by it, and a waveform of one sample is shown.

Image Correction Method of Color Line-Scan System

As the development of machine vision technology, the color line-scan system is widely applied in the on-line inspection. Due to the non-uniform gray scale and color distortion of the image acquired by the system, the image correction is needed to reduce the problem of image processing and the stability system. Based on reasons mentioned above, a method that using polynomial fitting to correct the image is presented to solve the problem in this paper. The method has been used in the automatic optical inspection of PCB, and has been proved to be effective. So this method will have a potential application to the development of the color line-scan machine vision system.

Development of miniature HTSC wide-band filter with open-loop resonators

The strong electric and magnetic coupled novel HTSC (high temperature superconductor) open-loop microstrip resonators are studied in this report and the traditional structure of open-loop resonators is improved. A miniature wide-band HTSC bandpass filter is developed by the novel structure, which is fabricated on YBCO/LaAlO3/YBCO substrate with dimensions of 14.8×9.6 mm2. This filter is tested at 77 K, and the specifications are that the center frequency is 2230 MHz, the bandwidth is 455 MHz, and the best insertion loss is 0.14 dB in passband.