Starting from the corrosion mechanism,this paper analyzes the characteristics of various types of stainless steel and selects the best performance composite plate composite plate stainless steel.Analyze and select the...Starting from the corrosion mechanism,this paper analyzes the characteristics of various types of stainless steel and selects the best performance composite plate composite plate stainless steel.Analyze and select the most suitable corrosion detection method based on specific practical multi working conditions,discuss the interference factors that affect metal corrosion during experimental simulation,and the advantages of newly developed sheet metal.The new development of composite board panels,with the substrate and composite materials applying their respective capabilities for MED,will bring breakthrough progress to the scientific research and engineering applica-tion of composite boards.展开更多
The extruded AZ80+0.4%Ce magnesium alloy was twisted in the temperature range of 300-380℃by using a Gleeble 3500 thermal simulation test machine with a torsion unit.The deformed cylindrical specimens were cooled at a...The extruded AZ80+0.4%Ce magnesium alloy was twisted in the temperature range of 300-380℃by using a Gleeble 3500 thermal simulation test machine with a torsion unit.The deformed cylindrical specimens were cooled at a cooling rate of 10℃/s or 0.1℃/s,respectively,and aged at 170℃.The microstructure analysis results showed that the grain size decreased with increasing specimen radial position from center(SRPC),and that the strong initial basal texture of the extruded magnesium alloy was weakened.Both continuous and discontinuous dynamic recrystallization mechanisms were involved in contributing to the grain refinement for all specimens investigated.And a novel extension twinning induced dynamic recrystallization mechanism was proposed for specimen deformed at 300℃.For the specimens deformed at 300℃and 340℃followed by a slow cooling rate(0.1℃/s),precipitates of various shapes(β-Mg_(17)Al_(12)),with the dominant precipitates being on the grains boundaries,appeared on the surface section.For specimen deformed at 380℃,lamellar precipitates(LPS)in the interiors of the grains were predominant.After aging,the LPS still dominated for specimens twisted at 380℃;however,the LPS gradually decreased with decreasing deformation temperatures from 380℃to 300℃.Dynamically precipitatedβ,especially those decorating the grain boundaries,changed the competition pictures for the LPS and precipitates of other shapes after aging.Interestingly,LPS dominated the areas for the center section of the specimens after aging regardless of deformation temperatures.Low temperature deformation with high SRPC followed by rapid cooling rate increased the micro hardness of the alloy after aging due to refined grain,reduced precipitates size,decreased lamellar spacing as well as strain hardening.展开更多
The morphologies of intermetallic phases(IMCs)during directional solidification of the Sn-Cu(L+Cu_(3)Sn→Cu_(6)Sn_(5))and Sn-Co(L+CoSn→CoSn_(2))peritectic systems were analyzed.The primary Cu_(3)Sn and peritectic Cu_...The morphologies of intermetallic phases(IMCs)during directional solidification of the Sn-Cu(L+Cu_(3)Sn→Cu_(6)Sn_(5))and Sn-Co(L+CoSn→CoSn_(2))peritectic systems were analyzed.The primary Cu_(3)Sn and peritectic Cu_(6)Sn_(5)phases in Sn-Cu alloy are IMCs whose solubility ranges are narrow,while both the primary CoSn and peritectic CoSn_(2)phases in Sn-Co alloy are IMCs whose solubility ranges are nil in equilibrium condition.The experimental results before acid corrosion shows that the dendritic morphology of both the Cu_(6)Sn_(5)and CoSn_(2)phases can be observed.The investigation on the local dendritic morphology after deep acid corrosion shows that these dendrites are composed of small sub-structures with faceted feature.Faceted growth of the primary Cu_(3)Sn and CoSn phases is also confirmed,and a faceted to non-faceted transition in their morphologies is observed with increasing growth velocities.Further analysis shows that the dendritic morphology is formed in the solidified phases whose solubility range is larger during peritectic solidification.展开更多
文摘Starting from the corrosion mechanism,this paper analyzes the characteristics of various types of stainless steel and selects the best performance composite plate composite plate stainless steel.Analyze and select the most suitable corrosion detection method based on specific practical multi working conditions,discuss the interference factors that affect metal corrosion during experimental simulation,and the advantages of newly developed sheet metal.The new development of composite board panels,with the substrate and composite materials applying their respective capabilities for MED,will bring breakthrough progress to the scientific research and engineering applica-tion of composite boards.
基金supported by key technology research and development project of Shan Xi province(20201102019)Natural science foundation of Shanxi Province(201901D111167)+1 种基金Shanxi Scholarship Council of China(2020–117)JCKY2018408B003Magnesium alloy high-performance XXX multi-directional extrusion technology and XX supporting scientific research project(xxxx-2019-021)。
文摘The extruded AZ80+0.4%Ce magnesium alloy was twisted in the temperature range of 300-380℃by using a Gleeble 3500 thermal simulation test machine with a torsion unit.The deformed cylindrical specimens were cooled at a cooling rate of 10℃/s or 0.1℃/s,respectively,and aged at 170℃.The microstructure analysis results showed that the grain size decreased with increasing specimen radial position from center(SRPC),and that the strong initial basal texture of the extruded magnesium alloy was weakened.Both continuous and discontinuous dynamic recrystallization mechanisms were involved in contributing to the grain refinement for all specimens investigated.And a novel extension twinning induced dynamic recrystallization mechanism was proposed for specimen deformed at 300℃.For the specimens deformed at 300℃and 340℃followed by a slow cooling rate(0.1℃/s),precipitates of various shapes(β-Mg_(17)Al_(12)),with the dominant precipitates being on the grains boundaries,appeared on the surface section.For specimen deformed at 380℃,lamellar precipitates(LPS)in the interiors of the grains were predominant.After aging,the LPS still dominated for specimens twisted at 380℃;however,the LPS gradually decreased with decreasing deformation temperatures from 380℃to 300℃.Dynamically precipitatedβ,especially those decorating the grain boundaries,changed the competition pictures for the LPS and precipitates of other shapes after aging.Interestingly,LPS dominated the areas for the center section of the specimens after aging regardless of deformation temperatures.Low temperature deformation with high SRPC followed by rapid cooling rate increased the micro hardness of the alloy after aging due to refined grain,reduced precipitates size,decreased lamellar spacing as well as strain hardening.
基金the support of the National Natural Science Foundation of China (Grant No. 51871118)the Fast Support Project (Grant No. JZX7Y20210162400301)the fund of State Key Laboratory of Special Rare Metal Materials (Grant No. SKL2020K003)
文摘The morphologies of intermetallic phases(IMCs)during directional solidification of the Sn-Cu(L+Cu_(3)Sn→Cu_(6)Sn_(5))and Sn-Co(L+CoSn→CoSn_(2))peritectic systems were analyzed.The primary Cu_(3)Sn and peritectic Cu_(6)Sn_(5)phases in Sn-Cu alloy are IMCs whose solubility ranges are narrow,while both the primary CoSn and peritectic CoSn_(2)phases in Sn-Co alloy are IMCs whose solubility ranges are nil in equilibrium condition.The experimental results before acid corrosion shows that the dendritic morphology of both the Cu_(6)Sn_(5)and CoSn_(2)phases can be observed.The investigation on the local dendritic morphology after deep acid corrosion shows that these dendrites are composed of small sub-structures with faceted feature.Faceted growth of the primary Cu_(3)Sn and CoSn phases is also confirmed,and a faceted to non-faceted transition in their morphologies is observed with increasing growth velocities.Further analysis shows that the dendritic morphology is formed in the solidified phases whose solubility range is larger during peritectic solidification.
