Sinopec Focuses on Sustainable Business Development

Sinopec Corp., China’s largest oil refiner, saw its oil and gas output rise 4.83 percent year-on-year in 2012 to 427.62 million barrels of oil equivalent, according to preliminary data released recently by the oil giant. The company’s crude oil production grew 2.04 percent to 328.28 million barrels in 2012. About 93.4 percent

Shale oil development techniques and application based on ternary-element storage and flow concept in Jiyang Depression,Bohai Bay Basin,East China

The ternary-element storage and flow concept for shale oil reservoirs in Jiyang Depression of Bohai Bay Basin,East China,was proposed based on the data of more than 10000 m cores and the production of more than 60 horizontal wells.The synergy of three elements(storage,fracture and pressure)contributes to the enrichment and high production of shale oil in Jiyang Depression.The storage element controls the enrichment of shale oil;specifically,the presence of inorganic pores and fractures,as well as laminae of lime-mud rocks,in the saline lake basin,is conducive to the storage of shale oil,and the high hydrocarbon generating capacity and free hydrocarbon content are the material basis for high production.The fracture element controls the shale oil flow;specifically,natural fractures act as flow channels for shale oil to migrate and accumulate,and induced fractures communicate natural fractures to form complex fracture network,which is fundamental to high production.The pressure element controls the high and stable production of shale oil;specifically,the high formation pressure provides the drive force for the migration and accumulation of hydrocarbons,and fracturing stimulation significantly increases the elastic energy of rock and fluid,improves the imbibition replacement of oil in the pores/fractures,and reduces the stress sensitivity,guaranteeing the stable production of shale oil for a long time.Based on the ternary-element storage and flow concept,a 3D development technology was formed,with the core techniques of 3D well pattern optimization,3D balanced fracturing,and full-cycle optimization of adjustment and control.This technology effectively guides the production and provides a support to the large-scale beneficial development of shale oil in Jiyang Depression.

Shale oil recovery by CO_(2)injection in Jiyang Depression,Bohai Bay Basin,East China

Laboratory experiments,numerical simulations and fracturing technology were combined to address the problems in shale oil recovery by CO_(2)injection.The laboratory experiments were conducted to investigate the displacement mechanisms of shale oil extraction by CO_(2)injection,and the influences of CO_(2)pre-pad on shale mechanical properties.Numerical simulations were performed about influences of CO_(2)pre-pad fracturing and puff-n-huff for energy replenishment on the recovery efficiency.The findings obtained were applied to the field tests of CO_(2)pre-pad fracturing and single well puff-n-huff.The results show that the efficiency of CO_(2)puff-n-huff is affected by micro-and nano-scale effect,kerogen,adsorbed oil and so on,and a longer soaking time in a reasonable range leads to a higher exploitation degree of shale oil.In the"injection+soaking"stage,the exploitation degree of heavy hydrocarbons is enhanced by CO_(2)through its effects of solubility-diffusion and mass-transfer.In the"huff"stage,crude oil in large pores is displaced by CO_(2)to surrounding larger pores or bedding fractures and finally flows to the production well.The injection of CO_(2)pre-pad is conducive to keeping the rock brittle and reducing the fracture breakdown pressure,and the CO_(2)is liable to filter along the bedding surface,thereby creating a more complex fracture.Increasing the volume of CO_(2)pre-pad can improve the energizing effect,and enhance the replenishment of formation energy.Moreover,the oil recovery is more enhanced by CO_(2)huff-n-puff with the lower shale matrix permeability,the lower formation pressure,and the larger heavy hydrocarbon content.The field tests demonstrate a good performance with the pressure maintained well after CO_(2)pre-pad fracturing,the formation energy replenished effectively after CO_(2)huff-n-puff in a single well,and the well productivity improved.

Iteration and evaluation of shale oil development technology for continental rift lake basins

By benchmarking with the iteration of drilling technology,fracturing technology and well placement mode for shale oil and gas development in the United States and considering the geological characteristics and development difficulties of shale oil in the Jiyang continental rift lake basin,East China,the development technology system suitable for the geological characteristics of shale oil in continental rift lake basins has been primarily formed through innovation and iteration of the development,drilling and fracturing technologies.The technology system supports the rapid growth of shale oil production and reduces the development investment cost.By comparing it with the shale oil development technology in the United States,the prospect of the shale oil development technology iteration in continental rift lake basins is proposed.It is suggested to continuously strengthen the overall three-dimensional development,improve the precision level of engineering technology,upgrade the engineering technical indicator system,accelerate the intelligent optimization of engineering equipment,explore the application of complex structure wells,form a whole-process integrated quality management system from design to implementation,and constantly innovate the concept and technology of shale oil development,so as to promote the realization of extensive,beneficial and high-quality development of shale oil in continental rift lake basins.

A New Device for Gas-Liquid Flow Measurements Relying on Forced Annular Flow

A new measurement device,consisting of swirling blades and capsule-shaped throttling elements,is proposed in this study to eliminate typical measurement errors caused by complex flow patterns in gas-liquid flow.The swirling blades are used to transform the complex flow pattern into a forced annular flow.Drawing on the research of existing blockage flow meters and also exploiting the single-phase flow measurement theory,a formula is introduced to measure the phase-separated flow of gas and liquid.The formula requires the pressure ratio,Lockhart-Martinelli number(L-M number),and the gas phase Froude number.The unknown parameters appearing in the formula are fitted through numerical simulation using computational fluid dynamics(CFD),which involves a comprehensive analysis of the flow field inside the device from multiple perspectives,and takes into account the influence of pressure fluctuations.Finally,the measurement model is validated through an experimental error analysis.The results demonstrate that the measurement error can be maintained within±8%for various flow patterns,including stratified flow,bubble flow,and wave flow.

An Experimental Analysis of Gas-Liquid Flow Breakdown in a T-Junction

When a gas-liquid two-phase flow(GLTPF)enters a parallel separator through a T-junction,it generally splits unevenly.This phenomenon can seriously affect the operation efficiency and safety of the equipment located downstream.In order to investigate these aspects and,more specifically,the so-called bias phenomenon(all gas and liquid flowing to one pipe,while the other pipe is a liquid column that fluctuates up and down),laboratory experiments were carried out by using a T-junction connected to two parallel vertical pipes.Moreover,a GLTPF prediction model based on the principle of minimum potential energy was introduced.The research results indicate that this model can accurately predict the GLTPF state in parallel risers.The boundary of the slug flow and the churn flow in the opposite pipe can be predicted.Overall,according to the results,the pressure drop curves of the two-phase flow in the parallel risers are basically the same when there is no bias phenomenon,but the pressure drop in the parallel riser displays a large deviation when there is a slug flow-churn flow.Only when the parallel riser is in a state of asymmetric flow and one of the risers produces churn flow,the two-phase flow is prone to produce the bias phenomenon.

Experimental study of the influencing factors and mechanisms of the pressure-reduction and augmented injection effect by nanoparticles in ultra-low permeability reservoirs

Nanoparticles(NPs)have gained significant attention as a functional material due to their ability to effectively enhance pressure reduction in injection processes in ultra-low permeability reservoirs.NPs are typically studied in controlled laboratory conditions,and their behavior in real-world,complex environments such as ultra-low permeability reservoirs,is not well understood due to the limited scope of their applications.This study investigates the efficacy and underlying mechanisms of NPs in decreasing injection pressure under various injection conditions(25—85℃,10—25 MPa).The results reveal that under optimal injection conditions,NPs effectively reduce injection pressure by a maximum of 22.77%in core experiment.The pressure reduction rate is found to be positively correlated with oil saturation and permeability,and negatively correlated with temperature and salinity.Furthermore,particle image velocimetry(PIV)experiments(25℃,atmospheric pressure)indicate that the pressure reduction is achieved by NPs through the reduction of wall shear resistance and wettability change.This work has important implications for the design of water injection strategies in ultra-low permeability reservoirs.

Acid-rock reaction kinetics in a two-scale model based on reaction order correction

The reaction order plays a crucial role in evaluating the response rate of acid-rock.However,the conventional two-scale model typically assumes that the reaction order is constant as one,which can lead to significant deviations from reality.To address this issue,this study proposes a novel multi-order dynamic model for acid-rock reaction by combining rotating disk experimental data with theoretical derivation.Through numerical simulations,this model allows for the investigation of the impact of acidification conditions on different orders of reaction,thereby providing valuable insights for on-site construction.The analysis reveals that higher response orders require higher optimal acid liquid flow rates,and lower optimal H+diffusion coefficients,and demonstrate no significant correlation with acid concentration.Consequently,it is recommended to increase the displacement and use high-viscosity acid for reservoirs with high calcite content,while reducing the displacement and using low-viscosity acid for reservoirs with high dolomite content.

Capsule polymer flooding for enhanced oil recovery

To solve the problems of shear degradation and injection difficulties in conventional polymer flooding,the capsule polymer flooding for enhanced oil recovery(EOR)was proposed.The flow and oil displacement mechanisms of this technique were analyzed using multi-scale flow experiments and simulation technology.It is found that the capsule polymer flooding has the advantages of easy injection,shear resistance,controllable release in reservoir,and low adsorption retention,and it is highly capable of long-distance migration to enable viscosity increase in deep reservoirs.The higher degree of viscosity increase by capsule polymer,the stronger the ability to suppress viscous fingering,resulting in a more uniform polymer front and a larger swept range.The release performance of capsule polymer is mainly sensitive to temperature.Higher temperatures result in faster viscosity increase by capsule polymer solution.The salinity has little impact on the rate of viscosity increase.The capsule polymer flooding is suitable for high-water-cut reservoirs for which conventional polymer flooding techniques are less effective,offshore reservoirs by polymer flooding in largely spaced wells,and medium to low permeability reservoirs where conventional polymers cannot be injected efficiently.Capsule polymer flooding should be customized specifically,with the capsule particle size and release time to be determined depending on target reservoir conditions to achieve the best displacement effect.

Differential Hydrocarbon Enrichment and its Main Controlling Factors in Depressions of the Bohai Bay Basin Differential Hydrocarbon Enrichment and its Main Controlling Factors in Depressions of the Bohai Bay Basin

Significant differential hydrocarbon enrichment occurs in depressions in a petroliferous basin.There are multiple depressions in the Bohai Bay Basin, and each depression as a relatively independent unit of hydrocarbon generation, migration and accumulation, contains significantly different hydrocarbon generation conditions and enrichment degree. On the basis of previous documents and a large number of statistical data, this work comparatively analyzed the differential hydrocarbon enrichment and its major controlling factors in depressions of the Bohai Bay Basin. The results show that depressions in the Bohai Bay Basin have various hydrocarbon enrichment degrees, and can be categorized into four types, namely enormously oil-rich, oil-rich, oily and oil-poor depressions. In general, the enormously oil-rich and oil-rich depressions are distributed in the eastern part of the basin along the Tan-Lu and Lan-Liao faults, whereas depressions in the western part of the basin are poor in hydrocarbons. Moreover, the vertical distribution of hydrocarbons is also highly heterogeneous, with Pre-Paleogene strata rich in hydrocarbons in the northern and western depressions, Paleogene strata rich in hydrocarbons in the entire basin, and Neogene strata rich in hydrocarbons in the off-shore areas of the Bohai Bay Basin. From early depressions in onshore areas to the late depressions in offshore areas of the Bohai Bay Basin, the source rocks and source-reservoir-cap rock assemblages gradually become younger and shallower, and the hydrocarbon resource abundance gradually increases. Hydrocarbon supplying condition is the key factor constraining the hydrocarbon enrichment for different depressions,while the main source-reservoir-cap rock assemblage, sufficient hydrocarbons and the transportation capacity of faults control the vertical distribution of hydrocarbons. The main factors controlling hydrocarbon enrichment are different for different layers. The hydrocarbon supplying condition of source rocks is the key controlling factor, whereas the source-reservoir configuration, the main sourcereservoir-cap rock assemblages, and the fault transportation are the main factors of hydrocarbon enrichment in the Paleogene, Paleogene and Neogene, respectively.

Relationship between Geological Structures and Hydrocarbon Enrichment of Different Depressions in the Bohai Bay Basin

The Bohai Bay Basin contains many depressions with varying degrees of hydrocarbon enrichment associated with the geological structures of different depressions. This study discussed the relationship between the geological structures and hydrocarbon enrichment of the depressions in the Bohai Bay Basin. Based on the Paleogene strata distribution and the length to width ratio of different depressions, their geological structures are divided into three types in plan-view： open（length/width 〈 2）, narrow（length/width 〉 4） and transitional types（length/width 2-4）. In cross section, the geological structures can be divided into dustpan I, dustpan II and double-faulted types. Based on tectonic evolution and sedimentary characteristics, the depressions are classified into early-formed, inherited and late-formed categories. Generally, narrow depressions are mainly located in the northeast and southwest of the Bohai Bay Basin, while open depressions are dominantly distributed in the central area of the basin; late-formed depressions are mainly around the Bohai sea area, and early-formed depressions are mostly located in the periphery of the basin. Geological structures of the depressions control the formation of the source, reservoir and cap rocks as well as hydrocarbon accumulation setting, and further influence the pay zones and oil-bearing sequence. In detail, dustpan II and doublefaulted depressions mainly have A-type sags, which often possess better hydrocarbon generation conditions than dustpan I ones; hydrocarbons in open dustpan II depressions tend to accumulate in the central uplift areas or buried hill, while those in narrow dustpan I depressions always accumulate in gentle slope belts. The oil-bearing sequence for different evolutional depressions corresponds well with the sedimentary strata of the main development stages of depressions. In early-formed depressions, hydrocarbons are mainly enriched in deeply buried reservoirs, while in late-formed depressions hydrocarbons are abundant in the relatively shallow traps. In summary, most inherited and late-formed dustpan II depressions are enriched in hydrocarbons due to their extensive source rocks and good source-reservoir-seal assemblages, whereas dustpan I and early-formed depressions are relatively poor in hydrocarbons.

Surfactant induced reservoir wettability alteration:Recent theoretical and experimental advances in enhanced oil recovery

Reservoir wettability plays an important role in various oil recovery processes.The origin and evolution of reservoir wettability were critically reviewed to better understand the complexity of wettability due to interactions in crude oil-brine-rock system,with introduction of different wetting states and their influence on fluid distribution in pore spaces.The effect of wettability on oil recovery of waterflooding was then summarized from past and recent research to emphasize the importance of wettability in oil displacement by brine.The mechanism of wettability alteration by different surfactants in both carbonate and sandstone reservoirs was analyzed,concerning their distinct surface chemistry,and different interaction patterns of surfactants with components on rock surface.Other concerns such as the combined effect of wettability alteration and interfacial tension （IFT） reduction on the imbibition process was also taken into account.Generally,surfactant induced wettability alteration for enhanced oil recovery is still in the stage of laboratory investigation.The successful application of this technique relies on a comprehensive survey of target reservoir conditions,and could be expected especially in low permeability fractured reservoirs and forced imbibition process.

Geochemical Characterization and Origin of High-Sulfur,Heavy Oils in Jiyang Sub-Basin,East China

High-sulfur,heavy petroleum is widely occurring in the Tertiary lacustrine Jiyang sub-basin, Bohai Bay Basin.They are differentiated into two families based on the bulk properties and biomarker compositions.Family 1 is characterized by high resins（40%-71%）and sulfur（2%-4%）,and low wax （l%-6%）,with n-alkanes removed by biodegradation,whereas family 2 is characterized by extremely abundant sulfur（3%-10%）,and high asphaltenes（7%-31%）and wax（2%-19%）,with no evidence of microbial attack.The oils of family 1 are distributed in the reservoir,lower than 1500 m throughout the sub-basin.Biomarker assemblages,such as low pristane/phytane ratios（1 Pr/Ph）and a high abundance of carotane,gammacerane,and dinosterane,suggest that they are derived from the calcareous mudstones and shales among the stratified,saline Es_4~u unit,in addition to the in situ biodegradation-concentrated sulfur content.However,the oils of family 2 are identified only in the western Zhanhua and eastern Chezhen depressions,with a depth deeper than 1700 m.Physical properties,together with biomarker ratios,including even-numbered n-alkanes,1 Pr/Ph,trace diasteranes,higher C35 homohopanes,and abundant dibenzothiophene series,with1 dibenzothiophene/phenanthrene,indicate an origin from carbonate source rocks.The X-ray diffraction analysis showed that the carbonate source rock is limited in the Es_4~u unit of the Bonan sag,which is different from most other source rocks in the same horizon.It is suggested that the high-sulfur,heavy oils are generated at the early stage of the oil window.Bacterial sulfate reduction might be responsible for the occurrence of sulfur species in the high-sulfur,heavy oils,while heavy biodegradation will enhance sulfur concentrations.

Effect of an Anionic Surfactant on Hydraulic Conductivities of Sodium- and Calcium-Saturated Soils

The effect of sodium dodecylbenzenesulfonate (SDBS), an anionic surfactant used widely in household products and industrial processes, on saturated hydraulic conductivities (Ksat) of an Anthrosol saturated with sodium (Na-soil) or calcium (Ca-soil) was analyzed in a laboratory experiment using the constant head method, and adsorption and dispersion experiments were also conducted to infer the possible mechanisms of Ksat fluctuations. The results showed that SDBS was more intensely adsorbed in the Ca-soil than in the Na-soil. With an increase in the SDBS concentration, the stability of the Na-soil suspensions decreased when the SDBS concentration was less than 1.2 mmol L-1 and then above this concentration, increased markedly, while the stability of the Ca-soil suspensions increased gradually at all SDBS concentrations studied. With an increase in the SDBS concentration, the Ksat of the Na-soil increased, which resulted mainly from the increase of water channels in the soil because of the coagulation of the soil particles, while the Ksat of Ca-soil decreased mainly on account of the clogging of partial water channels by precipitated Ca(DBS)2 and the fine soil particles generated.

Characteristics and Genetic Mechanisms of Overpressure in the Depressions of Bohai Bay Basin, China

The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.

Modified method for fracability evaluation of tight sandstones based on interval transit time

Fracability is a property that indicates how easy reservoir rocks can be fractured in hydraulic fracturing operations.It is a key parameter for fracturing design and evaluation.In order to utilize continuous logging data to predict fracability,synchronous tests of dynamic and static mechanical parameters of rocks under different confining pressures were conducted on13 tight sandstone samples derived from the central Junggar Basin,China.A modified formula between dynamic and static mechanical parameters was established.Fracability of the tight reservoir in the Junggar Basin was then evaluated based on brittleness index,fracture toughness,and fracability index.The effectiveness of fracturing was analyzed combined with the oil testing curve after hydraulic fracturing.The results show that:(1)The distribution of oil-bearing formations in the studied area coincides well with stratum of higher fracability index.(2)The critical fracability index is determined to be 0.3,three formations are selected as fracturing candidates,and a thin mudstone interbed is identified in the oil-bearing formation.(3)Well testing curve verifies the reliability of the fracability evaluation method and the accuracy of the modified formula between dynamic and static mechanical parameters.This study provides useful information for improving fracturing operations of tight oil and gas reservoirs.

Enrichment rules and exploration practices of Paleogene shale oil in Jiyang Depression, Bohai Bay Basin, China

Based on formation testing data of more than 40 wells with industrial oil flow, systematic observation of 1 010.26 m long cores taken from 4 wells and test data of over 10 000 core samples combining with drilling and pilot fracturing data of multiple wells, the geological characteristics of the upper submember of the Sha 4 Member to the lower submember of the Sha 3 Member of Paleogene(Es4s-Es3x) in the Jiyang Depression were investigated to find out factors controlling the enrichment of shale oil and the accumulation model of shale oil, and a comprehensive evaluation method for shale oil sweet spots was established. It is found through the study that the target shale layer is characterized by strong heterogeneity, weak diagenesis, low thermal evolution and high content of clay and carbonate minerals. Shale lithofacies, microcrack, thin interlayer and abnormal pressure are the main factors affecting enrichment and stable production of shale oil, the organic rich laminar shale has the best storage and oil-bearing capacity, microcrack network system improve the storage capacity and permeability of the shale, the thin interlayer is the main flow channel for stable shale oil production, and the abnormal high pressure layer is rich in free state shale oil and high in oil content. The shale oil layers in the target section were divided into three types: matrix, interlayer and fracture ones. According to the occurrence state and exploration practice of shale oil at home and abroad, it is concluded that the interlayer shale oil is the most profitable type at present. The selection parameters for the different types of shale oil were determined, and accordingly the favorable areas were pointed out by comprehensive evaluation of multiple factors. Vertical wells in the interlayer shale oil reservoir, such as Fan 159, Fan 143 and GX 26, were stimulated by volume fracturing and high conductivity channel fracturing jointly. After fracturing, they had a daily oil production of over 6 t, up to 44 t, and stable productivity. Shale oil is expected to become an important replacement energy resource in the Jiyang Depression.

The Three-layer Structure and Systems of Petroleum Migration and Accumulation of Continental Basins

The concept of the three-layer structure of continental basins is presented based on the characteristics of layered structure of basins. The reservoir could be classified into accumulation system assemblage, accumulation system, accumulation assemblage and reservoir. This paper discusses the characteristics of hydrocarbon accumulation system assemblages of the Zhanhua Depression, which include four kinds of genetic patterns： （1） buried-hill hydrocarbon accumulation system assemblage; （2） self-sourced accumulation system assemblage from the upper interval of member 4 to member 1 of Shahejie formation; （3） transition accumulation system assemblage from member 1 of the Shahejie formation to Dongying formation and （4） externally sourccd accumulation system assemblage in the late Tertiary. The hydrocarbon-source transport network layer consisted of faults and unconformities, which connected with the reservoir layer.

Investigating microscopic seepage characteristics and fracture effectiveness of tight sandstones:a digital core approach

Microscopic seepage characteristics are critical for the evaluation of tight sandstone reservoirs.In this study,a digital core approach integrating microscopic seepage simulation and CT scanning was developed to characterize microscopic seepage and fracture effectiveness(the ratio of micro-fractures that contributes to fluid flow)of tight sandstones.Numerical simulations were carried out for characterizations of tight sandstones.The results show that the axial permeability of the investigated cylindrical tight sandstone from Junggar Basin in China is 0.460μm~2,while the radial permeability is 0.3723μm~2,and the axial and radial effective fracture ratios are 0.4387 and 0.4806,respectively,indicating that cracks are not fully developed and the connectivity between micro-cracks is poor.Directional permeability that is difficult to measure by laboratory experiments can be obtained readily using the proposed method in this paper.The results provide important information for improving the exploration and development of tight sandstone reservoirs.

Evolution characteristics and exploration targets of Permian clastic rock reservoirs in Bohai Bay Basin,East China

Based on core observation, thin section examination, fluid inclusions analysis, carbon and oxygen isotopic composition analysis, and other approaches, the structural and burial evolution histories were investigated, and the diagenetic evolution process and genetic/development models were systematically discussed of the Upper Paleozoic Permian clastic rock reservoirs in the Bohai Bay Basin, East China. The Bohai Bay Basin underwent three stages of burial and two stages of uplifting in the Upper Paleozoic. Consequently, three stages of acid dissolution generated by the thermal evolution of kerogen, and two stages of meteoric freshwater leaching occurred. Dissolution in deeply buried, nearly closed diagenetic system was associated with the precipitation of authigenic clay and quartz, leading to a limited increase in storage space. Different structural uplifting–subsidence processes of tectonic zones resulted in varying diagenetic–reservoir-forming processes of the Permian clastic reservoirs. Three genetic models of reservoirs are recognized. The Model I reservoirs with pores formed in shallow strata and buried in shallow to medium strata underwent two stages of exposure to long-term open environment and two stages of meteoric freshwater leaching to enhance pores near the surface, and were shallowly buried in the late stage, exhibiting the dominance of secondary pores and the best physical properties. The Model Ⅱ reservoirs with pores formed in shallow strata and preserved due to modification after deep burial experienced an early exposure-open to late burial-closed environment, where pore types were modified due to dissolution, exhibiting the dominance of numerous secondary solution pores in feldspar and the physical properties inferior to Model I. The Model Ⅲ reservoirs with pores formed after being regulated after multiple periods of burial and dissolution experienced a dissolution of acidic fluids of organic origin under a near-closed to closed environment, exhibiting the dominance of intercrystalline micropores in kaolinite and the poorest physical properties. The target reservoirs lied in the waterflood area in the geological period of meteoric freshwater leaching, and are now the Model Ⅱ deep reservoirs in the slope zone–depression zone. They are determined as favorable options for subsequent exploration.