Chemical and Morphological Characteristics of Particulate Matter Suspended in the Air of the Dhaka University Area of Bangladesh

Total suspended particulate matter (SPM) in the urban atmosphere of Dhaka city was collected using a high volume sampling technique for a period of one month (August 2017-September 2017). Chemical characterization of particulate matter (PM) was investigated, and characterized concerning the size distribution, morphological features such as count, total area, average size, perimeter, circularity, aspect ratio (AR), roundness;equivalent spherical diameter (ESD), surface area and volume of PM. The results of elemental analysis showed that the presence of heavy metal in PM was ten to hundred times higher than the standard value prescribed by WHO and USEPA. Several morphological analysis indicated that particles varying in shape from nearly spherical to various irregular shape, had higher surface energy, higher content of Cl and S bearing particles and had a large surface area which can cause greater damage to lungs. The presence of various organic compounds containing functional groups like alcohols, ketones aldehydes, carboxylic acids as well as unsaturated and saturated carbon bonds was observed by FT-IR analysis. Scanning Electron Microscopy (SEM) was used to characterize the morphology of the PM. Agglomerates and shoots type particles were mostly seen in SPM.

Using Time Series of Satellite Images to Detect Vegetation Cover Change in Dhaka City

The spatial land cover pattern of Dhaka city is restlessly altering as it has highest growing rates among megacities. Due to high urbanization rates, land use is changing from natural to man-made along with resource extractions that accelerate the land cover changes. This study has evidently given the glimpse of the raising concern by assessing the loss of vegetation coverage of Dhaka Metropolitan Area using multi-temporal Landsat imageries. 20 years satellite data have been used to detect the vegetation cover changes in Dhaka city with an interval of 10 years. Study reveals that 66.87 square kilometer vegetation coverage of Dhaka Metropolitan Area is lost during the whole time period. The rate of loss of vegetation coverage is very severe in Dhanmondi, Gulshan, Uttara, Demra, Mirpur, Sabujbagh, Ramna, Mohammadpur, Kafrul, Shyampur and so on. The overall precision of my Landsat-derived vegetation coverage maps is 92.5%.

Incidence of Methicillin Resistant Staphylococcus aureus in Burn Patients Admitted to Burn Unit, Dhaka Medical

Staphylococcus aureus infection remains an increasing problem for higher morbidity and mortality in burn patients. We sought to determine the frequency of methicillin-resistant S. aureus (MRSA) in burn wound patients and study their drug resistance genes. Samples were collected (August 2010 to October 2011) from burn unit of Dhaka Medical College Hospital (DMCH), Bangladesh. MRSA was identified by conventional culture based methods. S. aureus was confirmed in 44.44% burn wound samples and 22.5% of the isolates were oxacillin resistant. All the S. aureus isolates were resistant to commonly used drugs like amoxicillin, azactam, erythromycin, azithromycin etc. and were sensitive to imipenem. The isolates were devoid of plasmid and the gene mecA, femA and IS431 were detected in their chromosomal DNA. Computational analysis of mecA gene sequence showed homology to S. aureus “penicillin binding protein 2a” (PBP-2a). The higher association of MRSA is in burn unit of DMCH, Bangladesh is alarming and with inappropriate antibiotic use, and the situation gets even complicated to treat. Therefore, the detection system and control practices for MRSA in DMCH should be improved in the hospital settings.

Chemical Composition and Source Characterization of Hailstones in Dhaka, Bangladesh

A comprehensive analysis on the chemical composition and source apportionment of hailstone samples were conducted in Dhaka, Bangladesh. pH, electrical conductivity (EC), total dissolved solids (TDS), water soluble ions (Na+, K+, Ca2+, Mg2+, Cl-, SO42-, NO3-, HCO3-) and trace metals (Zn, Fe, Cu, Mn) of hailstone were determined. The result revealed that the average pH, EC, TDS were 6.95 ± 0.54, 356.3 ± 150.6 μS·cm-1 and 17.5 ± 2.89 mg·L-1, respectively. The water soluble ions followed the order: Ca2+ > Cl-1 > SO42- > HCO3- > Na+ > Mg2+ > K+ > NO3-. The concentrations of trace metals ranged in order with Zn > Fe > Cu, while the concentration of Mn was below detection limit. Sodium adsorption ratio (SAR) was 0.20 ± 0.09 meqL-1 which indicates it is benign to plants and safe for irrigation. The order of neutralization factor (calculated with average concentrations) found in hailstone was NFCa(1.16) > NFMg (0.36) > NFK(0.32) which were originated from earth crust. Notable correlation was found in between soil tracers Ca2+ and Mg2+ (r = 0.87), indicating their common source dust. Enrichment factor analysis revealed that Ca2+, Mg2+ and K+ are mainly from crust, whereas NO3- and SO42- are mainly attributable to anthropogenic origins. Further source contribution analysis revealed that anthropogenic actions accounted for 99.2% of total NO3- and 89.6% of total SO42-, while 99.2% of total Ca2+ and 95% Mg2+ were from crustal source.

Serologic Detection of <i>Toxoplasma gondii</i>in Cat Owners Residing at Dhaka Metropolitan Area of Bangladesh

Toxoplasma gondii is a zoonotic protozoan that can infect any warm-blooded mammal. T. gondii infects about one-third of the human population on the planet. Infection with the parasite in human causes toxoplasmosis that may pose a high risk in immunocompromised individuals under certain clinical conditions. Cats are the ultimate hosts of T. gondii where oocysts are formed through mating of male and female gametes. Infected cats can expel T. gondii oocysts in their feces, and thereby capable of pass on a disease to humans and other animals through consumption of foods, vegetables and water that are polluted with cat feces. The study was conducted to detect the presence of anti-T. gondii IgM and IgG antibodies in the blood of individuals with or without cat contact to determine if there is any relationship between cat contacts and T. gondii infection in humans. To address this, we enrolled subjects who contacted with the cat as target group and individuals with no cat contact as control group. Following register of different demographic data (including age, sex, education, foods habit, income status, etc.), whole blood from each enrolled subject of both the target group and control group was collected for serum preparation. T. gondii infected subjects were detected by Toxo Rapid test kit through identifying anti-T. gondii IgM and IgG antibodies in their serum. We found that only three out of twenty subjects who were in contact with cat showed positive IgG response while IgM antibody response was absent for all subjects. When compared with the data from control group, we did not find any significant association (p = 0.33) of cat contact with the transmission of T. gondii into human. However, with this small number of study subjects, we cannot conclusively say that there is no impact of cat contact on the transmission of T. gondii into human. Whether any association exists or not can be ascertained with a large number of subjects from different areas of Bangladesh in a future study in the population.

Prevalence and Antimicrobial Susceptibility of Listeria spp, in Dairy Food Products and Water Samples in Dhaka, Bangladesh

A total of 57 samples, of which 17 were surface water samples and 40 were dairy food samples （raw milk, pasteurized milk, icecream, sweet, milk based drink like matha and borhani） were tested for the isolation ofListeria spp. Putative Listeria isolates were identified by conventional microbiological tests and Analytical Profile Index. Overall prevalence ofListeria spp. in both food and water samples were 8.77%, of which one was （1.75%） Listeria monocytogenes, 2 （3.5%） were Listeria innocua and 2 were （3.5%） Listeria welshimeri. When compared between two types of samples, water samples contained two Listeria spp. （11.76%） of which one was pathogenic Listeria monocytogenes and the other was Listeria innocua. In case of food samples, three Listeria spp. （7.5%） were isolated of which one was Listeria innocua （icecream sample） and two were Listeria welshimeri （icecream sample and raw milk）. No Listeria was found in pasteurized milk, sweet, matha and borhani. Antibiotic resistance profile of the Listeria isolates showed that 60% isolates were resistant to Ampicillin and Erythromycin, 20% isolates were Sulphamethoxazole and Ciprofloxacin resistant. No resistance was observed to Chloramphenicol for any Listeria isolates.

Geochemical Color Maps of the Dhaka Water, Bangladesh—New Map Presentations for Toxic Metals and Isotopes

This research investigated the water qualities and distribution of heavy metals concentration in rain, river, ground and supply waters, providing a baseline in Dhaka Urban, Bangladesh, against which future changes can be assessed. The water sample was collected in the Dhaka central zone, from a site located in the center of the Bengal Delta plain between 23&#17640'N - 23&#17654'N latitude and 90&#17620'E - 90&#17631'E longitude which is affected by environmental pollution for high traffic, industrialization and because of its rapid urbanization. The water samples were analyzed for heavy metals by Inductively Coupled Plasma Mass-Spectrometry (ICP-MS), major ions by Ion-Chromatography (IC), water tracer (δ18O and δD) by Mass-Spectrometry (MS), following the standard techniques. Elevated EC and chloride (Cl-) are the markers of wastewater, providing an indication of impacts in the Buriganga River water. The relative concentrations of major ions were presented in the form of Piper and Stiff Diagram. The color maps were constructed to present ions distribution over the areas. The stream reaches directly in Buriganga River from leather industries which may reflect the naturally low dissolved oxygen (DO) 0.3 - 3.5 (mg/L), where aquatic life can’t survive. Uranium contents U238 (0.1 - 2.7 μg/L) are not exceeding the WHO guideline level of 30 μg&#183L-1. Significant portion of Cs133 (0.05 - 0.32 μg/L), Se (0.03 - 0.12 μg/L), B (50 - 2986 μg/L) and Cr (0.55 - 18.59 μg/L), could be increased in Buriganga River areas by the effect of local sources like leather industry. Zn (10 - 1466 μg/L) in the Dhaka Rain and Pb (4 - 6 μg/L) in Dhaka Water occur mainly in industrial and the high traffic areas, respectively. The isotopic (δ18O/δD) distributions have been evaluated for understanding of contaminant sources in groundwater and wastewater recharge from Buriganga River to adjacent depleted groundwater system. The results indicate that the magnitude of pollution problem depends on the size of the area affected, rapid groundwater depletion, polluted river water recharge and the type of the pollutant involved and finally that makes the complex in Dhaka Geochemical pattern.

Gas Chromatographic Method for Identification and Quantification of Commonly Used Residual Solvents in Pharmaceuticals Products

Background: Impurities are not expected in the final pharmaceutical products. All impurities should be regulated in both drug substances and drug products in accordance with pharmacopeias and ICH guidelines. Three different types of impurities are generally available in the pharmaceutical’s product specification: organic impurities, inorganic impurities, and residual solvents. Residual solvents are organic volatile chemicals used or generated during the manufacturing of drug substances or drug products. Purpose: The aim of this study is to develop a cost-effective gas chromatographic method for the identification and quantification of some commonly used solvents—methanol, acetone, isopropyl alcohol (IPA), methylene chloride, ethyl acetate, tetrahydrofuran (THF), benzene, toluene, and pyridine—in pharmaceutical product manufacturing. This method will be able to identify and quantify the multiple solvents within a single gas chromatographic procedure. Method: A gas chromatography (GC) equipped with a headspace sampler and a flame ionization detector, and a column DB 624, 30-meter-long × 0.32-millimeter internal diameter, 1,8 μm-thick, Brand-Agilent was used to develop this method. The initial GC oven temperature was 40°C and held for 5 minutes. It was then increase to 80˚C at a rate of 2˚C per minute, followed by a further increase to 225˚C at a rate of 30˚C per minute, with a final hold at 225˚C for 10 minutes. Nitrogen was used as a carrier gas at a flow rate of 1.20 mL per minute. Dimethyl sulfoxide (DMSO) was selected as sample solvent. Results: The developed method is precise and specific. The percent RSD for the areas of six replicate injections of this gas chromatographic method was within 10.0 and the recovery result found within 80.0% to 120.0%.

Heat and Mass Transfer on Non-Newtonian Peristaltic Flow in a Channel in Presence of Magnetic Field: Analytical and Numerical Analysis

A study has been arranged to investigate the flow of non-Newtonian fluid in a vertical asymmetrical channel using peristalsis. The porous medium allows the electrically conductive fluid to flow in the channel, while a uniform magnetic field is applied perpendicular to the flow direction. The analysis takes into account the combined influence of heat and mass transfer, including the effects of Soret and Dufour. The flow’s non-Newtonian behavior is characterized using a Casson rheological model. The fluid flow equations are examined within a wave frame of reference that has a wave velocity. The analytic solution is examined using long wavelengths and a small Reynolds number assumption. The stream function, temperature, concentration and heat transfer coefficient expressions are derived. The bvp4c function from MATLAB has been used to numerically solve the transformed equations. The flow characteristics have been analyzed using graphs to demonstrate the impacts of different parameters.

Nature’s Pharmacy under Siege: Investigating Antibiotic Resistance Pattern in Endophytic Bacteria of Medicinal Plants

Antibiotic resistance poses a significant global health threat, necessitating a thorough understanding of its prevalence in various ecological contexts. Medicinal plants, renowned for their therapeutic properties, host endophytic bacteria that produce bioactive compounds. Understanding antibiotic resistance dynamics in these bacteria is vital for human health and antibiotic efficacy preservation. In this study, we investigated antibiotic resistance profiles in endophytic bacteria from five medicinal plants: Thankuni, Neem, Aparajita, Joba, and Snake plant. We isolated and characterized 113 endophytic bacteria, with varying resistance patterns observed against multiple antibiotics. Notably, 53 strains were multidrug-resistant (MDR), with 14 exhibiting extensive drug resistance (XDR). Thankuni-associated bacteria displayed 44% MDR and 11% XDR, while Neem-associated bacteria showed higher resistance (60% MDR, 13% XDR). Aparajita-associated bacteria had lower resistance (22% MDR, 6% XDR), whereas Joba-associated bacteria exhibited substantial resistance (54% MDR, 14% XDR). Snake plant-associated bacteria showed 7% MDR and 4% XDR. Genus-specific distribution revealed Bacillus (47%), Staphylococcus (21%), and Klebsiella (11%) as major contributors to MDR. Our findings highlight diverse drug resistance patterns among plant-associated bacteria and underscore the complexity of antibiotic resistance dynamics in diverse plant environments. Identification of XDR strains emphasizes the severity of the antibiotic resistance problem, warranting further investigation into contributing factors.

Long-term outcomes of titanium-nitride-oxide coated stents and drug-eluting stents in acute coronary syndrome:A systematic review and meta-analysis

BACKGROUND In severe cases of coronary artery disease,percutaneous coronary intervention provide promising results.The stent used could be a drug-eluting stent(DES)or a titanium-nitride-oxide coated stent(TiNOS).AIM To compare the 5-year effectiveness and safety of the two stent types.METHODS The following systematic review and meta-analysis was conducted in accordance with the preferred reporting items for systematic reviews and meta-analysis guidelines,and PubMed/MEDLINE,Scopus,and Cochrane Central were searched from inception till August 2023.Primary outcomes were major adverse cardiac events(MACE),cardiac death,myocardial infarction(MI),cardiac death or MI,and ischemia-driven total lesion revascularization(ID-TLR).RESULTS Four randomized controlled trials(RCT),which analyzed a sum total of 3045 patients with acute coronary syndrome(ACS)after a median follow-up time of 5 years were included.Though statistically insignificant,an increase in the ID-TLR was observed in patients receiving TiNOSs vs DESs.In addition,MI,cardiac death and MI,and definite stent thrombosis(DST)were significantly decreased in the TiNOS arm.Baseline analysis revealed no significant results with meta-regression presenting non-ST elevated MI(NSTEMI)as a statistically significant covariate in the outcome of MACE.CONCLUSION TiNOS was found to be superior to DES in terms of MI,cardiac death or MI,and DST outcomes,however,the effect of the two stent types on ID-TLR and MACE was not significant.A greater number of studies are required to establish an accurate comparison of patient outcomes in TiNOS and DES.

Characteristics of Multi-Objective Linear Programming Problem and Multi-Objective Linear Fractional Programming Problem Taking Maximum Value of Multi-Objective Functions

In this paper, a new statistical averaging technique is proposed for finding an optimal solution to a multi-objective linear fractional programming problem (MOLFPP) and multi-objective linear programming problem (MOLPP) by using new arithmetic averaging method and new geometric averaging method. It is significantly noticeable same characteristics among all the technique while taking maximum or minimum among all optimized values for multi-objective functions using simplex algorithm. The characteristics provided from the problems are verified by the numerical examples.

Impact of non-alcoholic fatty liver disease on coronavirus disease 2019: A systematic review

BACKGROUND Many studies have revealed a link between non-alcoholic fatty liver disease(NA-FLD)and coronavirus disease 2019(COVID-19),making understanding the relationship between these two conditions an absolute requirement.AIM To provide a qualitative synthesis on the currently present data evaluating COVID-19 and NAFLD.METHODS This systematic review was conducted in accordance with the guidelines pro-vided by preferred reporting items for systematic reviews and meta-analyses and the questionnaire utilized the population,intervention,comparison,and outcome framework.The search strategy was run on three separate databases,PubMed/MEDLINE,Scopus,and Cochrane Central,which were systematically searched from inception until March 2024 to select all relevant studies.In addition,ClinicalTrials.gov,Medrxiv.org,and Google Scholar were searched to identify grey literature.RESULTS After retrieval of 11 studies,a total of 39282 patients data were pooled.Mortality was found in 11.5%and 9.4%of people in NAFLD and non-NAFLD groups.In all,23.2%of NAFLD patients and 22%of non-NAFLD admissions diagnosed with COVID-19 were admitted to the intensive care unit,with days of stay varying.Ventilatory support ranged from 5%to 40.5%in the NAFLD cohort and from 3.1%to 20%in the non-NAFLD cohort.The incidence of acute liver injury showed significance.Clinical improvement on days 7 and 14 between the two classifications was significant.Hospitalization stay ranged from 9.6 days to 18.8 days and 7.3 days to 16.4 days in the aforementioned cohorts respectively,with 73.3%and 76.3%of patients being discharged.Readmission rates varied.CONCLUSION Clinical outcomes except mortality consistently showed a worsening trend in patients with NAFLD and concomitant COVID-19.Further research in conducting prospective longitudinal studies is essential for a more powerful conclusion.

Prevalence and Characterization of Pathogens Responsible for Enteric Fever and Assessment of Their Antibiotic Susceptibility Pattern in Bangladesh

In Bangladesh, Enteric fever is a persistent health issue throughout the year, occasionally reaching epidemic levels. The growing antibiotic resistance makes treatment increasingly challenging. Therefore, studying the antibiotic resistance patterns within the population is crucial to ensure a more effective treatment strategy. This study was designed to determine the prevalence, antimicrobial susceptibility profile, and factors associated with Salmonella spp. infections among clinically suspected Enteric fever patients in Bangladesh. This study also aimed to investigate whether there has been a re-emergence in the susceptibility of bacterial strains to conventional drugs. Data were collected from February 2024 to July 2024, from patients suspected Enteric fever (fever less than seven days duration) in a Private Diagnostic Center of Bangladesh. A total of 195 blood samples were cultured, where 53.85% came out positive, among which 79.05% Salmonella typhi and 20.95% Salmonella paratyphi A were found. Prevalence of Typhoid fever was observed high among the school-going age group (0 - 15 years) patients. Both these organisms were susceptible to ceftazidime, cefixime, ceftriaxone and cefepime but resistant to nalidixic acid, ciprofloxacin and levofloxacin. Nalidixic Acid is resistant to all S. paratyphi A and sensitive to few S. typhi. Ciprofloxacin and levofloxacin showed delayed response (36.14% and 22.72% sensitive to S. typhi and S. paratyphi A, respectively) and resistance (63.85% and 77.27% resistant to S. typhi and S. paratyphi A, respectively). In case of S. typhi, the resistance was found against ampicillin (32.53%), chloramphenicol (27.71%), cotrimoxazole (24.09%) and the resistance of S. paratyphi A found against ampicillin (4.54%), chloramphenicol (0%) and cotrimoxazole (0%). This study will provide clinicians with alternative drug options and facilitate the effective treatment of Enteric fever.

Robustness Study and Superior Method Development and Validation for Analytical Assay Method of Atropine Sulfate in Pharmaceutical Ophthalmic Solution

Background: The robustness is a measurement of an analytical chemical method and its ability to contain unaffected by little with deliberate variation of analytical chemical method parameters. The analytical chemical method variation parameters are based on pH variability of buffer solution of mobile phase, organic ratio composition changes, stationary phase (column) manufacture, brand name and lot number variation;flow rate variation and temperature variation of chromatographic system. The analytical chemical method for assay of Atropine Sulfate conducted for robustness evaluation. The typical variation considered for mobile phase organic ratio change, change of pH, change of temperature, change of flow rate, change of column etc. Purpose: The aim of this study is to develop a cost effective, short run time and robust analytical chemical method for the assay quantification of Atropine in Pharmaceutical Ophthalmic Solution. This will help to make analytical decisions quickly for research and development scientists as well as will help with quality control product release for patient consumption. This analytical method will help to meet the market demand through quick quality control test of Atropine Ophthalmic Solution and it is very easy for maintaining (GDP) good documentation practices within the shortest period of time. Method: HPLC method has been selected for developing superior method to Compendial method. Both the compendial HPLC method and developed HPLC method was run into the same HPLC system to prove the superiority of developed method. Sensitivity, precision, reproducibility, accuracy parameters were considered for superiority of method. Mobile phase ratio change, pH of buffer solution, change of stationary phase temperature, change of flow rate and change of column were taken into consideration for robustness study of the developed method. Results: The limit of quantitation (LOQ) of developed method was much low than the compendial method. The % RSD for the six sample assay of developed method was 0.4% where the % RSD of the compendial method was 1.2%. The reproducibility between two analysts was 100.4% for developed method on the contrary the compendial method was 98.4%.

Effect of Different Mulch Materials on Yield and Nutrition Profile of Common Capsicum (Capsicum annuum) Cultivars in Bangladesh

Capsicum is a nutritious vegetable and its cultivation in farms is getting popular in Bangladesh. Although many efforts have lain to explore better yielding and nutritionally rich cultivars with suitable modern cultivation techniques but still have to find the desired outcome. Thus, it’s necessary to conduct further research to identify the high-yielding and nutritious capsicum cultivars in Bangladesh. An experiment was conducted from July 2021 to June 2022 at the Bangladesh Institute of Research and Training on Applied Nutrition (BIRTAN) research field with three cultivars of capsicum: B0 = California Wonder, B1 = BARI Misti Morich-1 and B2 = BARI Misti Morich-2 and three mulching: T0 = No mulching, T1 = Water hyacinth, T2 = Poly Mulching in randomized complete block design with three replications to identify better quality capsicum cultivar and suitable mulching material. Among cultivars the BARI Misti Morich-2 (B2) showed increased agronomic parameters like number of branches and effective branches per plant, leaves length and width, consequently yield and yield contributing traits were also enhanced like fruits per plant, fruit length, fruit diameter and yield per plant (25.97%, 4.54%, 3.64% and 21.43%, respectively). Poly Mulching (T2) increased agronomic traits, yield traits and yield (0.61 kg) than BARI Misti Morich-1 (T1). The combined effect of B2T2 increased the number of branches per plant, effective branches per plant, leaves length and breadth by 40%, 90%, 15.57% and 26.22%, respectively, hence resulting in an increased yield of 20%. BARI Misti Morich-2 cultivar showed an increase in Fe, Zn and Vitamin-C content of 26.24% and 23.10%, 8.82% and 5.14%, and 6.03% and 5.74% than B0 and B1 cultivars, respectively. Therefore, BARI Misti Morich-2 exhibited the improved agronomic, yield and nutritional traits of capsicum under poly mulching among other cultivars in Bangladesh.

Structural Style and Hydrocarbon Prospectivity of the Growth Faults Related Structures in the Bengal Basin

The structural and tectonic evolution of the Bengal Basin is characterized by a complex interplay of factors, including sedimentation, the rise of the Himalayan Mountains, and the movements of Jurassic syn-rift faults. This study aims to comprehend the progression of growth faults inside the basin by examining fault geometry, basin development, and structural relief patterns. We used high-quality 2D seismic lines from the PK-MY-8403, classical seismic interpretation techniques and modeling were carried out to reveal the plate tectonic conditions, stratigraphy, and sedimentation history of the basin. The break-up unconformity, Paleocene and Eocene submerged conditions, and crucial geological formations including the Sylhet Limestone, Barail Group, and Surma Group were among the notable features recognized in seismic section. With an emphasis on growth strata and pre-growth strata, significant variations in layer thickness and relief were remarked in different stratigraphic levels. Basin development events like the evolution of the Miocene remnant ocean basin, sedimentation in Oligocene, Eocene Himalayan collision, and the Pliocene reverse fault development are analyzed. In the early the Pliocene compressional forces outpaced sedimentation rates and syn-depositional normal faults of Oligocene time began to move in opposite direction. Syn-depositional growth faults may have formed in the Bengal Basin as a result of this reversal. This research provides a detailed comprehensive knowledge of growth fault development in the Bengal Basin following the seismic interpretation, modelling, and thickness/relief analysis. The outcomes point to a substantial hydrocarbon potential, especially in regions like the Eocene Hinge Zone, where the prospectivity of the area is enhanced by carbonate reefs and Jalangi shale. However, the existence of petroleum four-way closure in the investigated region requires further investigation.

Galerkin-Bernstein Approximations for the System of Third-Order Nonlinear Boundary Value Problems

This paper is devoted to find the numerical solutions of one dimensional general nonlinear system of third-order boundary value problems (BVPs) for the pair of functions using Galerkin weighted residual method. We derive mathematical formulations in matrix form, in detail, by exploiting Bernstein polynomials as basis functions. A reasonable accuracy is found when the proposed method is used on few examples. At the end of the study, a comparison is made between the approximate and exact solutions, and also with the solutions of the existing methods. Our results converge monotonically to the exact solutions. In addition, we show that the derived formulations may be applicable by reducing higher order complicated BVP into a lower order system of BVPs, and the performance of the numerical solutions is satisfactory. .

Legendre-Weighted Residual Methods for System of Fractional Order Differential Equations

The numerical approach for finding the solution of fractional order systems of boundary value problems (BPVs) is derived in this paper. The implementation of the weighted residuals such as Galerkin, Least Square, and Collocation methods are included for solving fractional order differential equations, which is broadened to acquire the approximate solutions of fractional order systems with differentiable polynomials, namely Legendre polynomials, as basis functions. The algorithm of the residual formulations of matrix form can be coded efficiently. The interpretation of Caputo fractional derivatives is employed here. We have demonstrated these methods numerically through a few examples of linear and nonlinear BVPs. The results in absolute errors show that the present method efficiently finds the numerical solutions of fractional order systems of differential equations.

Machine acceleration time series prediction for dimensional accuracy of 3D printed parts

This study explores the influence of infill patterns on machine acceleration prediction in the realm of three-dimensional(3D)printing,particularly focusing on extrusion technology.Our primary objective was to develop a long short-term memory(LSTM)network capable of assessing this impact.We conducted an extensive analysis involving 12 distinct infill patterns,collecting time-series data to examine their effects on the acceleration of the printer’s bed.The LSTM network was trained using acceleration data from the adaptive cubic infill pattern,while the Archimedean chords infill pattern provided data for evaluating the network’s prediction accuracy.This involved utilizing offline time-series acceleration data as the training and testing datasets for the LSTM model.Specifically,the LSTM model was devised to predict the acceleration of a fused deposition modeling(FDM)printer using data from the adaptive cubic infill pattern.Rigorous testing yielded a root mean square error(RMSE)of 0.007144,reflecting the model’s precision.Further refinement and testing of the LSTM model were conducted using acceleration data from the Archimedean chords infill pattern,resulting in an RMSE of 0.007328.Notably,the developed LSTM model demonstrated superior performance compared to an optimized recurrent neural network(RNN)in predicting machine acceleration data.The empirical findings highlight that the adaptive cubic infill pattern considerably influences the dimensional accuracy of parts printed using FDM technology.