With the development of power systems,a large number of shunt capacitors are used to improve power quality in the distribution network.The shunt capacitor banks are operated much frequently,as a result,the capacitor b...With the development of power systems,a large number of shunt capacitors are used to improve power quality in the distribution network.The shunt capacitor banks are operated much frequently,as a result,the capacitor banks will bear large numbers of over-voltage inevitably.If the over-voltage exceeds certain amplitude,the capacitor will be damaged.This paper aims at the capacitor banks in the 35 kV side of Shanghai Xu-xing 500 kV substation,and applies ATP-EMTP to simulate the over-voltages generated by operating the switches under different angles of the source.Finally,according to the results of simulation and theoretical analysis,a best choice(i.e.angles of the source) to switch on capacitor banks is proposed.In this case the over-voltage on the capacitor will be limited to lowest.展开更多
Cloud computing technology is used in traveling wave fault location,which establishes a new technology platform for multi-terminal traveling wave fault location in complicated power systems.In this paper,multi-termina...Cloud computing technology is used in traveling wave fault location,which establishes a new technology platform for multi-terminal traveling wave fault location in complicated power systems.In this paper,multi-terminal traveling wave fault location network is developed,and massive data storage,management,and algorithm realization are implemented in the cloud computing platform.Based on network topology structure,the section connecting points for any lines and corresponding detection placement in the loop are determined first.The loop is divided into different sections,in which the shortest transmission path for any of the fault points is directly and uniquely obtained.In order to minimize the number of traveling wave acquisition unit(TWU),multi-objective optimal configuration model for TWU is then set up based on network full observability.Finally,according to the TWU distribution,fault section can be located by using temporal correlation,and the final fault location point can be precisely calculated by fusing all the times recorded in TWU.PSCAD/EMTDC simulation results show that the proposed method can quickly,accurately,and reliably locate the fault point under limited TWU with optimal placement.展开更多
基金supported of the Fundamental Research Founds for the Central Universities
文摘With the development of power systems,a large number of shunt capacitors are used to improve power quality in the distribution network.The shunt capacitor banks are operated much frequently,as a result,the capacitor banks will bear large numbers of over-voltage inevitably.If the over-voltage exceeds certain amplitude,the capacitor will be damaged.This paper aims at the capacitor banks in the 35 kV side of Shanghai Xu-xing 500 kV substation,and applies ATP-EMTP to simulate the over-voltages generated by operating the switches under different angles of the source.Finally,according to the results of simulation and theoretical analysis,a best choice(i.e.angles of the source) to switch on capacitor banks is proposed.In this case the over-voltage on the capacitor will be limited to lowest.
基金the Key Project of Smart Grid Technology and Equipment of National Key Research and Development Plan of China(2016YFB0900600)Project supported by the National Natural Science Foundation Fund for Distinguished Young Scholars(51425701)+2 种基金the National Natural Science Foundation of China(51207013)the Hunan Province Natural Science Fund for Distinguished Young Scholars(2015JJ1001)the Education Department of Hunan Province Project(15C0032).
文摘Cloud computing technology is used in traveling wave fault location,which establishes a new technology platform for multi-terminal traveling wave fault location in complicated power systems.In this paper,multi-terminal traveling wave fault location network is developed,and massive data storage,management,and algorithm realization are implemented in the cloud computing platform.Based on network topology structure,the section connecting points for any lines and corresponding detection placement in the loop are determined first.The loop is divided into different sections,in which the shortest transmission path for any of the fault points is directly and uniquely obtained.In order to minimize the number of traveling wave acquisition unit(TWU),multi-objective optimal configuration model for TWU is then set up based on network full observability.Finally,according to the TWU distribution,fault section can be located by using temporal correlation,and the final fault location point can be precisely calculated by fusing all the times recorded in TWU.PSCAD/EMTDC simulation results show that the proposed method can quickly,accurately,and reliably locate the fault point under limited TWU with optimal placement.
