Aimed at making high-performance coatings,the UV-crosslinking behavior of bisphenol A-type poly(ether ether ketone) were studied. A homogeneous aqueous dispersion of this soluble poly(ether ether ketone) was successfu...Aimed at making high-performance coatings,the UV-crosslinking behavior of bisphenol A-type poly(ether ether ketone) were studied. A homogeneous aqueous dispersion of this soluble poly(ether ether ketone) was successfully obtained through polymer emulsion formation and then the solvent evaporation. The uniform particles(～150 nm) could be formed when mass fraction of the polymer in chloroform was ranged from 3% to 25%. The coating could be prepared via spray-coating method from above concentrated aqueous dispersion and some processing aids. We found the UV crosslinked layers had better hardness,adhesions and solvent-resistance than the ones without UV irradiation.展开更多
A type of novel crosslinkable poly(aryl ether ketone)s containing pendent phenylethynyl moieties(PEP-PAEK-Fn) were synthesized. The polymers were prepared by copolycondensation reaction of difluoro-monomer with potass...A type of novel crosslinkable poly(aryl ether ketone)s containing pendent phenylethynyl moieties(PEP-PAEK-Fn) were synthesized. The polymers were prepared by copolycondensation reaction of difluoro-monomer with potassium salt of 4-phenylethynylphenyl hydroquinone(PEP-PH) and 4,4′-isopropylidenediphenol(BPA). The Mns and Mw/Mns of polymers determined by GPC with polystyrene standard were 46700, 100000 and 1.6, respectively. The resulting polymers were thermally crosslinked at 370 ℃ for 2 h in N2 atmosphere. The glass transition temperature is increased after crosslinking. The cured polymers show a good chemical resistance and high thermal stability up to 500 ℃ under nitrogen.展开更多
Six highly fluorinated poly(arylene ether)s were prepared by using a nucleophilic polycondensationreaction and their sulfonation selectivity was investigated.Single site of each repeated unit on pendant phenylgroup co...Six highly fluorinated poly(arylene ether)s were prepared by using a nucleophilic polycondensationreaction and their sulfonation selectivity was investigated.Single site of each repeated unit on pendant phenylgroup could be obtainedviathe postsulfonation approach under mild reaction conditions.Phenylated fluorina-ted poly(arylene ether)(Ph-FPAE) showed more excellent controllability over substituted sites and sulfonationdegree when chlorosulfonic acid was used as sulfonation reagent.The resulting sulfonated Ph-FPAE(Ph-SF-PAE) exhibited good thermal stability,solubility and hot-water dimensional stability,and also had a protonconductivity of 0.10 S/cm at 100℃.The results showed that Ph-SFPAE might be a candidate material forproton exchange membrane in fuel cell applications.展开更多
文摘Aimed at making high-performance coatings,the UV-crosslinking behavior of bisphenol A-type poly(ether ether ketone) were studied. A homogeneous aqueous dispersion of this soluble poly(ether ether ketone) was successfully obtained through polymer emulsion formation and then the solvent evaporation. The uniform particles(～150 nm) could be formed when mass fraction of the polymer in chloroform was ranged from 3% to 25%. The coating could be prepared via spray-coating method from above concentrated aqueous dispersion and some processing aids. We found the UV crosslinked layers had better hardness,adhesions and solvent-resistance than the ones without UV irradiation.
文摘A type of novel crosslinkable poly(aryl ether ketone)s containing pendent phenylethynyl moieties(PEP-PAEK-Fn) were synthesized. The polymers were prepared by copolycondensation reaction of difluoro-monomer with potassium salt of 4-phenylethynylphenyl hydroquinone(PEP-PH) and 4,4′-isopropylidenediphenol(BPA). The Mns and Mw/Mns of polymers determined by GPC with polystyrene standard were 46700, 100000 and 1.6, respectively. The resulting polymers were thermally crosslinked at 370 ℃ for 2 h in N2 atmosphere. The glass transition temperature is increased after crosslinking. The cured polymers show a good chemical resistance and high thermal stability up to 500 ℃ under nitrogen.
文摘Six highly fluorinated poly(arylene ether)s were prepared by using a nucleophilic polycondensationreaction and their sulfonation selectivity was investigated.Single site of each repeated unit on pendant phenylgroup could be obtainedviathe postsulfonation approach under mild reaction conditions.Phenylated fluorina-ted poly(arylene ether)(Ph-FPAE) showed more excellent controllability over substituted sites and sulfonationdegree when chlorosulfonic acid was used as sulfonation reagent.The resulting sulfonated Ph-FPAE(Ph-SF-PAE) exhibited good thermal stability,solubility and hot-water dimensional stability,and also had a protonconductivity of 0.10 S/cm at 100℃.The results showed that Ph-SFPAE might be a candidate material forproton exchange membrane in fuel cell applications.
